Spectroscopic properties and molecular structure of copper phytate complexes: IR, Raman, UV-Vis, EPR studies and DFT calculations

Multifunctional Lithium Phytate/Carbon Nanotube Double-Layer-Modified Separators for High-Performance Lithium-Sulfur Batteries

Li dendrite and the shuttle effect are the two primary hindrances to the commercial application of lithium-sulfur batteries (LSBs). Here, a multifunctional separator has been fabricated via successively coating carbon nanotubes (CNTs) and lithium phytate (LP) onto a commercial polypropylene (PP) separator to improve the performance of LSBs. The LP coating layer with abundant electronegative phosphate group as permselective ion sieve not only reduces the polysulfide shuttle but also facilitates uniform Li+ flux through the PP separator. And the highly conductive CNTs on the second layer act as a second collector to accelerate the reversible conversion of sulfide species. The synergistic effect of LP and CNTs further increases the electrolyte wettability and reaction kinetics of cells with a modified separator and suppresses the shuttle effect and growth of Li dendrite. Consequently, the LSBs present much enhanced rate performance and cyclic performance. It is expected that this study may generate an executable tactic for interface engineering of separator to accelerate the industrial application process of LSBs.

Chitosan and Its Carboxymethyl-Based Membranes Produced by Crosslinking with Magnesium Phytate

Membranes produced by crosslinking chitosan with magnesium phytate were prepared using highly deacetylated chitosan and its N-carboxymethyl, O-carboxymethyl and N,O-carboxymethyl derivatives. The conditions of the membrane production were described. IR, Raman, electron absorption and emission spectra were measured and analyzed for all the substrates. It was found that O-carboxymethyl chitosan derivative is the most effectively crosslinked by magnesium phytate, and the films formed on this substrate exhibit good mechanical parameters of strength, resistance and stability. Strong O-H···O hydrogen bonds proved to be responsible for an effective crosslinking process. Newly discovered membrane types produced from chitosan and magnesium phytate were characterized as morphologically homogenous and uniform by scanning electron microscopy (SEM) and IR measurements. Due to their good covering properties, they do not have pores or channels and are proposed as packaging materials.

Stability, spectroscopic, electrochemistry and QTAIM analysis of Cu-Znn-1On clusters for glucose sensing application: A study on theoretical and experimental insights

Clusters of (ZnO)_n (n = 2-4) have been shown to play a central role in the detection of glucose entity based on the existence of photo-induced electrons (PE), which facilitates the interaction between (ZnO)_n clusters and glucose entity guests. The electrochemistry experiment has confirmed the detection of glucose by the title clusters. The optimization, energetic parameters, and vibrational frequency calculations have indicated that the Cu-Zn_n-1O_n-glucose are more stable than the (ZnO)_n-glucose complexes. It has been demonstrated that the Cu doping enhanced the chemical behavior of the clusters and formed a high intramolecular charge transfer (ICT) in the system. The glucose sensing by all the forms of Cu-Zn_n-1O_n clusters showed that the Cu-Zn₃O₄, Cu-Wurtzite, and Cu-Rocksalt clusters are the most suitable for adsorbing the glucose guest. The HOMO/LUMO iso-surfaces of the complexes showed that the electron concentrations are localized in the d orbitals and mainly in the form of the d¹⁰ orbitals around Zn atoms. The molecular electrostatic potential (MEP) has clearly indicated that a high charge transfer occurs between the copper and the oxygen atoms, which facilitate the adsorption of glucose. The reactivity parameters also indicated that the Wurtzite-glucose complex has a high electrophilicity index (ω), which means a good acceptor behavior to interact with glucose. Additionally, the bond between the (ZnO)_n clusters and the glucose polar element has been studied in detail by using QTAIM theory. Finally, the theoretical and experimental studies prove that the Cu-Zn_n-1O_n clusters are very suitable and competent compounds for detecting glucose.

A study on Sr/Zn phytate complexes: structural properties and antimicrobial synergistic effects against Streptococcus mutans

Phytic acid (PA) is an abundant natural plant component that exhibits a versatility of applications benefited from its chemical structure, standing out its use as food, packing and dental additive due to its antimicrobial properties. The capacity of PA to chelate ions is also well-established and the formation and thermodynamic properties of different metallic complexes has been described. However, research studies of these compounds in terms of chemistry and biological features are still demanded in order to extend the application scope of PA complexes. The main goal of this paper is to deepen in the knowledge of the bioactive metal complexes chemistry and their bactericide activity, to extend their application in biomaterial science, specifically in oral implantology. Thus, this work presents the synthesis and structural assessment of two metallic phytate complexes bearing the bioactive cations Zn2+ and Sr2+ (ZnPhy and SrPhy respectively), along with studies on the synergic biological properties between PA and cations. Metallic phytates were synthesized in the solid-state by hydrothermal reaction leading to pure solid compounds in high yields. Their molecular formulas were C6H12024P6Sr4·5H2O and C6H12024P6Zn6·6H2O, as determined by ICP and HRES-TGA. The metal coordination bond of the solid complexes was further analysed by EDS, Raman, ATR-FTIR and solid 13C and 31P-NMR spectroscopies. Likewise, we evaluated the in vitro ability of the phytate compounds for inhibiting biofilm production of Streptococcus mutans cultures. Results indicate that all compounds significantly reduced biofilm formation (PA < SrPhy < ZnPhy), and ZnPhy even showed remarkable differences with respect to PA and SrPhy. Analysis of antimicrobial properties shows the first clues of the possible synergic effects created between PA and the corresponding cation in different cell metabolic processes. In overall, findings of this work can contribute to expand the applications of these bioactive metallic complexes in the biotechnological and biomedical fields, and they can be considered for the fabrication of anti-plaque coating systems in the dentistry field.

On the Origins of Some Spectroscopic Properties of "Purple Iron" (the Tetraoxoferrate(VI) Ion) and Its Pourbaix Safe-Space

In this work, the authors attempt to interpret the visible, infrared and Raman spectra of ferrate(VI) by means of theoretical physical-inorganic chemistry and historical highlights in this field of interest. In addition, the sacrificial decomposition of ferrate(VI) during water treatment will also be discussed together with a brief mention of how Rayleigh scattering caused by the decomposition of Fe^VIO₄²⁻ may render absorbance readings erroneous. This work is not a compendium of all the instrumental methods of analysis which have been deployed to identify ferrate(VI) or to study its plethora of reactions, but mention will be made of the relevant techniques (e.g., Mössbauer Spectroscopy amongst others) which support and advance this overall discourse at appropriate junctures, without undue elaboration on the foundational physics of these techniques.

Role of metal complexation on the solubility and enzymatic hydrolysis of phytate

Phytate is a dominant form of organic phosphorus (P) in the environment. Complexation and precipitation with polyvalent metal ions can stabilize phytate, thereby significantly hinder the hydrolysis by enzymes. Here, we studied the stability and hydrolyzability of environmentally relevant metal phytate complexes (Na, Ca, Mg, Cu, Zn, Al, Fe, Al/Fe, Mn, and Cd) under different pHs, presence of metal chelators, and thermal conditions. Our results show that the order of solubility of metal phytate complexes is as follows: i) for metal species: Na, Ca, Mg > Cu, Zn, Mn, Cd > Al, Fe, ii) under different pHs: pH 5.0 > pH 7.5), and iii) in the presence of chelators: EDTA> citric acid. Phytate-metal complexes are mostly resistant towards acid hydrolysis (except Al-phytate), and dry complexes are generally stable at high pressure and temperature under autoclave conditions (except Ca phytate). Inhibition of metal complex towards enzymatic hydrolysis by Aspergillus niger phytase was variable but found to be highest in Fe phytate complex. Strong chelating agents such as EDTA are insufficient for releasing metals from the complexes unless the reduction of metals (such as Fe) occurs first. The insights gained from this research are expected to contribute to the current understanding of the fate of phytate in the presence of various metals that are commonly present in agricultural soils.

A NIR-Responsive Phytic Acid Nickel Biomimetic Complex Anchored on Carbon Nitride for Highly Efficient Solar Hydrogen Production

A challenge in photocatalysis consists in improving the efficiency by harnessing a large portion of the solar spectrum. We report the design and realization of a robust molecular-semiconductor photocatalytic system (MSPS) consisting of an earth-abundant phytic acid nickel (PA-Ni) biomimetic complex and polymeric carbon nitride (PCN). The MSPS exhibits an outstanding activity at λ=940 nm with high apparent quantum efficiency (AQE) of 2.8 %, particularly λ>900 nm, as it outperforms all reported state-of-the-art near-infrared (NIR) hybrid photocatalysts without adding any noble metals. The optimum hydrogen (H₂ ) production activity was about 52 and 64 times higher with respect to its pristine counterpart under the AM 1.5 G and visible irradiation, respectively, being equivalent to the platinum-assisted PCN. This work sheds light on feasible avenues to prepare highly active, stable, cheap NIR-harvesting photosystems toward sustainable and scalable solar-to-H₂ production.

Stability of Alum-Containing Paper under Alkaline Conditions

The present contribution evaluates the methods of degradation and stabilization of alum-containing paper with a focus on the alkaline environment achieved by deacidification procedures. In terms of reviewed subjects, the contribution focuses on alum-rosin sized paper, which is still used as a carrier of knowledge and information; however, it also mentions cellulose itself and other brands of paper. The contribution summarizes the results on the homogeneity of the distribution of alum and rosin in the paper mass and on the paper surface. It provides the knowledge gained in the field of alkaline hydrolysis and oxidation with special regard to transition metal species. It shows the values of alkaline reserves achieved in the main mass-deacidification processes. On the basis of the acquired knowledge, the contribution emphasizes the procedures of paper stabilization. Criteria of “increased mechanical permanence and lifetime prolongation” adopted to evaluate and compare the efficacy of individual mass-deacidification processes were applied and corresponding data are introduced. The contribution also draws attention to the existence of open issues in the area of paper degradation and stabilization.

Electrospinning metal Phosphide/Carbon nanofibers from Phytic Acid for hydrogen evolution reaction catalysts

This paper reports a general electrospinning method to prepare various metal phosphide/carbon nanofibers composite for electrochemical hydrogen evolution reaction (HER) catalysts. An earth-abundant organic acid-phytic acid is successfully incorporated into a conventional electrospinning precursor as the phosphorus source, and continuous nanofibers can be obtained through spinning. After heat treatment, metal phosphide/carbon composite nanofibers can be obtained, with fine phosphide nanoparticles well dispersed on the surface of an interconnected carbon backbone network. Such fibrous structures offer fast charge transfer pathways and enlarged active surface area, which are beneficial for electrocatalysts. As a result, enhance HER catalytic activity can be achieved.