Molecularly imprinted electrochemical sensor based on the synergic effect of nanoporous gold and copper nanoparticles for the determination of cysteine

Colorimetric and fluorescent probes for cysteine detection: Applications in food safety and cellular imaging

In this study, three BODIPY-based fluorescent probes were designed and synthesized. The ultraviolet-visible spectra, fluorescence spectra, smartphone color recognition application and bioimaging were utilized to evaluate the capacity of the probes. By comparing key parameters, BDP-SIN had optimal performances including fastest response (10 min), highest signal-to-noise ratio (815 times) and lowest limit of detection (LOD = 49 nM). The recovery rate ranged from 92.04 % to 103.25 %. Meanwhile, BDP-SIN was triumphantly employed for determination of Cys in different daily food samples. Moreover, the test strips and microporous filter membrane loaded with BDP-SIN were developed for the portable real-time visualization and quantitative detection of Cys in food samples, which the contents ranged from 0.27 μM to 0.49 μM. Besides, BDP-SIN could image Cys in the living cells and mice. The novelty of this work was that developed an effective tool for researching the roles of Cys in food industry and living organisms.

Recent Advances in Electrochemical Sensors for Sulfur-Containing Antioxidants

Sulfur-containing antioxidants are an important part of the antioxidant defense systems in living organisms under the frame of a thiol-disulfide equilibrium. Among them, l-cysteine, l-homocysteine, l-methionine, glutathione, and α-lipoic acid are the most typical representatives. Their actions in living systems are briefly discussed. Being electroactive, sulfur-containing antioxidants are interesting analytes to be determined using various types of electrochemical sensors. Attention is paid to the chemically modified electrodes with various nanostructured coverages. The analytical capabilities of electrochemical sensors for sulfur-containing antioxidant quantification are summarized and discussed. The data are summarized and presented on the basis of the electrode surface modifier applied, i.e., carbon nanomaterials, metal and metal oxide nanoparticles (NPs) and nanostructures, organic mediators, polymeric coverage, and mixed modifiers. The combination of various types of nanomaterials provides a wider linear dynamic range, lower limits of detection, and higher selectivity in comparison to bare electrodes and sensors based on the one type of surface modifier. The perspective of the combination of chromatography with electrochemical detection providing the possibility for simultaneous determination of sulfur-containing antioxidants in a complex matrix has also been discussed.

An Electrochemical Sensor for Sulfadiazine Determination Based on a Copper Nanoparticles/Molecularly Imprinted Overoxidized Polypyrrole Composite

To protect consumers from risks related to overexposure to sulfadiazine, total residues of this antibacterial agent in animal-origin foodstuffs not exceed international regulations. To this end, a new electrochemical sensor based on a molecularly imprinted polymer nanocomposite using overoxidized polypyrrole and copper nanoparticles for the detection of sulfadiazine is elaborated. After optimization of the preparation of the electrochemical sensors, their differential pulse voltammetric signal exhibits an excellent stability and reproducibility at 1.05 V, with a large linear range between 10^-9 and 10^-5 mol L^-1 and a low detection limit of 3.1 × 10^-10 mol L^-1. The produced sulfadiazine sensor was successfully tested in real milk samples. The combination of the properties of the electrical conduction of copper nanoparticles with the properties of the preconcentration of the molecularly imprinted overoxidized polypyrrole allows for the highly sensitive detection of sulfadiazine, even in real milk samples. This strategy is new and leads to the lowest detection limit yet achieved, compared to those of the previously published sulfadiazine electrochemical sensors.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

A Multifunctional Electrochemical Sensor for the Simultaneous Detection of Ascorbic Acid, Dopamine, Uric Acid, and Nitrite

BACKGROUND

Ascorbic acid (AA), dopamine (DA), uric acid (UA), and nitrite (NO2-) are essential biomarkers for human metabolism and can be used to indicate some chronic diseases and metabolic disorders, including scurvy, Parkinson's disease, hyperuricemia, and kidney disease.

OBJECTIVE

A multifunctional electrochemical sensor that can integrate the detection of these species was constructed using nanoporous gold (NPG) as a recognition element to modify glassy carbon electrode (GCE).

METHODS

The electrochemical performance of the multifunctional electrochemical sensor was investigated toward AA, DA, UA, and NO2- in citrate buffer solution (CBS, 100 mM, pH 4.0) and human serum using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) methods.

RESULTS

In the quaternary mixture detection, the resulting NPG/GCE electrode displayed four independent oxidation peaks with wide peak separations. Further, the NPG/GCE electrode showed good linear responses with the sensitivities of 32, 1103, 71, and 147 μA/mM/cm2 and the detection limits of 1.58, 0.17, 0.37, and 0.36 μM for AA, DA UA, and NO2-, respectively. Additionally, the NPG/GCE electrode exhibited great anti-interference and was successfully applied in human serum samples.

CONCLUSIONS

These results indicate that the NPG/GCE electrode can simultaneously and selectively detect AA, DA, UA, and NO2-, which has the potential for application and diagnosis in the screening and diagnosis of chronic diseases and metabolic disorders.

HIGHLIGHTS

A multianalyte electrochemical sensor was fabricated for human metabolites detection. The sensor displayed good performance in the simultaneous detection of AA, DA, UA, and NO2- and applied to human serum samples.

Recent developments in voltammetric and amperometric sensors for cysteine detection

This review article aims to provide an overview of the recent advances in the voltammetric and amperometric sensing of cysteine (Cys). The introduction summarizes the important role of Cys as an essential amino acid, techniques for its sensing, and the utilization of electrochemical methods and chemically modified electrodes for its determination. The main section covers voltammetric and amperometric sensing of Cys based on glassy carbon electrodes, screen printed electrodes, and carbon paste electrodes, modified with various electrocatalytic materials. The conclusion section discusses the current challenges of Cys determination and the future perspectives.

Electrodeposition of Polysaccharide and Protein Hydrogels for Biomedical Applications

In the last few decades, polysaccharide and protein hydrogels have attracted significant attentions and been applied in various engineering fields. Polysaccharide and protein hydrogels with appealing physical and biological features have been produced to meet different biomedical applications for their excellent properties related to biodegradability, biocompatibility, nontoxicity, and stimuli responsiveness. Numerous methods, such as chemical crosslinking, photo crosslinking, graft polymerization, hydrophobic interaction, polyelectrolyte complexation and electrodeposition have been employed to prepare polysaccharide and protein hydrogels. Electrodeposition is a facile way to produce different polysaccharide and protein hydrogels with the advantages of temporal and spatial controllability. This paper reviews the recent progress in the electrodeposition of different polysaccharide and protein hydrogels. The strategies of pH induced assembly, Ca2+ crosslinking, metal ions induced assembly, oxidation induced assembly derived from electrochemical methods were discussed. Pure, binary blend and ternary blend polysaccharide and protein hydrogels with multiple functionalities prepared by electrodeposition were summarized. In addition, we have reviewed the applications of these hydrogels in drug delivery, tissue engineering and wound dressing.

Novel molecularly imprinted polymer (MIP) multiple sensors for endogenous redox couples determination and their applications in lung cancer diagnosis

Multiplex electrochemical sensors for amperometric detection of glutathione disulfide (GSSG), glutathione (GSH), cysteine (Cys), cystine (Cyss), β-nicotinamide adenine dinucleotide phosphate (NADP⁺) and coenzyme II reduced tetrasodium salt (NADPH) were developed, in which analysis of Cyss, NADP⁺ and NADPH are the first report using this sensing system. Specificity of these sensors were ensured by a layer of molecularly imprinted polymer (MIP) which was electropolymerized in situ with the analytes as template. All the sensors were tested with standard buffers and mouse blood samples, showing satisfactory performance towards the corresponding analytes. Dynamic concentration for the six analytes was in the range of 10^-11-10^-8 mol/L with the detection limit down to 20 pmol/L. In addition, artificially synthesized MIP film on the electrodes allowed for good selectivity and stability. Real blood sample measurement proved that the sensors owned decent accuracy with recovery value ranging from 92%~112%. More importantly, blood samples from lung cancer patients and healthy donors were assayed by using the proposed sensors. Redox potentials (Ehc) were calculated based on the contents of these endogenic substances, which were utilized to reflect the health status of human body and help diagnose lung cancer. The levels of GSH, NADPH and the absolute value of Ehc_(GSH/GSSG) in patients with lung cancer are significantly lower (P < 0.01) than those in healthy people, while the contents of GSSG (P < 0.01) are higher. The blood test results suggested that the content of GSH, NADPH, NADP⁺ and Ehc_(GSH/GSSG) might serve as biomarkers for lung cancer prediagnosis. These novel sensors for liquid biospy of cancer have cost-benefit and scalability advantage over current techniques, potentially enabling broader clinical access and efficient population screening.

Preparation, Modification, Characterization, and Biosensing Application of Nanoporous Gold Using Electrochemical Techniques

Nanoporous gold (np-Au), because of its high surface area-to-volume ratio, excellent conductivity, chemical inertness, physical stability, biocompatibility, easily tunable pores, and plasmonic properties, has attracted much interested in the field of nanotechnology. It has promising applications in the fields of catalysis, bio/chemical sensing, drug delivery, biomolecules separation and purification, fuel cell development, surface-chemistry-driven actuation, and supercapacitor design. Many chemical and electrochemical procedures are known for the preparation of np-Au. Recently, researchers are focusing on easier and controlled ways to tune the pores and ligaments size of np-Au for its use in different applications. Electrochemical methods have good control over fine-tuning pore and ligament sizes. The np-Au electrodes that are prepared using electrochemical techniques are robust and are easier to handle for their use in electrochemical biosensing. Here, we review different electrochemical strategies for the preparation, post-modification, and characterization of np-Au along with the synergistic use of both electrochemistry and np-Au for applications in biosensing.

Current Progress of Nanomaterials in Molecularly Imprinted Electrochemical Sensing

Nanomaterials have received much attention during the past decade because of their excellent optical, electronic, and catalytic properties. Nanomaterials possess high chemical reactivity, also high surface energy. Thus, provide a stable immobilization platform for biomolecules, while preserving their reactivity. Due to the conductive and catalytic properties, nanomaterials can also enhance the sensitivity of molecularly imprinted electrochemical sensors by amplifying the electrode surface, increasing the electron transfer, and catalyzing the electrochemical reactions. Molecularly imprinted polymers that contain specific molecular recognition sites can be designed for a particular target analyte. Incorporating nanomaterials into molecularly imprinted polymers is important because nanomaterials can improve the response signal, increase the sensitivity, and decrease the detection limit of the sensors. This study describes the classification of nanomaterials in molecularly imprinted polymers, their analytical properties, and their applications in the electrochemical sensors. The progress of the research on nanomaterials in molecularly imprinted polymers and the application of nanomaterials in molecularly imprinted polymers is also reviewed.