Facile synthesis of CuO nanosheets as electrode for supercapacitor with long cyclic stability in novel methyl imidazole-based ionic liquid electrolyte

Advantage of Dimethyl Sulfoxide in the Fabrication of Binder-Free Layered Double Hydroxides Electrodes: Impacts of Physical Parameters on the Crystalline Domain and Electrochemical Performance

The electrode fabrication stage is a crucial step in the design of supercapacitors. The latter involves the binder generally for adhesive purposes. The binder is electrochemically dormant and has weak interactions, leading to isolating the active material and conductive additive and then compromising the electrochemical performance. Designing binder-free electrodes is a practical way to improve the electrochemical performance of supercapacitors. However, most of the methods developed for the fabrication of binder-free LDH electrodes do not accommodate LDH materials prepared via the co-precipitation or ions exchange routes. Herein, we developed a novel method to fabricate binder-free LDH electrodes which accommodates LDH materials from other synthesis routes. The induced impacts of various physical parameters such as the temperature and time applied during the fabrication process on the crystalline domain and electrochemical performances of all the binder-free LDH electrodes were studied. The electrochemical analysis showed that the electrode prepared at 200 °C-1 h exhibited the best electrochemical performance compared to its counterparts. A specific capacitance of 3050.95 Fg^-1 at 10 mVs^-1 was achieved by it, while its Rct value was 0.68 Ω. Moreover, it retained 97% of capacitance after 5000 cycles at 120 mVs^-1. The XRD and FTIR studies demonstrated that its excellent electrochemical performance was due to its crystalline domain which had held an important amount of water than other electrodes. The as-developed method proved to be reliable and advantageous due to its simplicity and cost-effectiveness.

Supercapacitor electrode materials: addressing challenges in mechanism and charge storage

In recent years, rapid technological advances have required the development of energy-related devices. In this regard, Supercapacitors (SCs) have been reported to be one of the most potential candidates to meet the demands of human’s sustainable development owing to their unique properties such as outstanding cycling life, safe operation, low processing cost, and high power density compared to the batteries. This review describes the concise aspects of SCs including charge-storage mechanisms and scientific principles design of SCs as well as energy-related performance. In addition, the most important performance parameters of SCs, such as the operating potential window, electrolyte, and full cell voltage, are reviewed. Researches on electrode materials are crucial to SCs because they play a pivotal role in the performance of SCs. This review outlines recent research progress of carbon-based materials, transition metal oxides, sulfides, hydroxides, MXenes, and metal nitrides. Finally, we give a brief outline of SCs’ strategic direction for future growth.

Marigold micro-flower like NiCo2O4 grown on flexible stainless-steel mesh as an electrode for supercapacitors

Nanostructured NiCo₂O₄ is a promising material for energy storage systems. Herein, we report the binder-free deposition of porous marigold micro-flower like NiCo₂O₄ (PNCO) on the flexible stainless-steel mesh (FSSM) as (PNCO@FSSM) electrode by simple chemical bath deposition. The SEM and EDS analysis revealed the marigold micro-flowers like morphology of NiCo₂O₄ and its elemental composition. The porous nature of the electrode is supported by the BET surface area (100.47 m² g⁻¹) and BJH pore size diameter (∼1.8 nm) analysis. This PNCO@FSSM electrode demonstrated a specific capacitance of 530 F g⁻¹ at a high current density of 6 mA cm⁻² and revealed 90.5% retention of specific capacitance after 3000 cycles. The asymmetric supercapacitor device NiCo₂O₄//rGO within a voltage window of 1.4 V delivered a maximum energy density of 41.66 W h kg⁻¹ at a power density of 3000 W kg⁻¹. The cyclic stability study of this device revealed 73.33% capacitance retention after 2000 cycles. These results indicate that the porous NiCo₂O₄ micro-flowers electrode is a promising functional material for the energy storage device.

Binder-free marigold micro-flower like NiCo₂O₄ deposited on FSSM as electrode in ASC device (NiCo₂O₄//rGO) is a promising functional material for energy storage device.

A novel three-dimensional network of CuCr2O4/CuO nanofibers for voltammetric determination of anticancer drug methotrexate

Considering the importance of measuring anticancer drugs, a carbon paste electrode (CPE) modified with CuCr₂O₄/CuO nanofibers in the presence of hydrophobic ionic liquid (IL) was fabricated for methotrexate (MTX) sensing. CuCr₂O₄/CuO nanofibers were prepared by electrospinning method. Then, the morphology and structure of the nanofibers were studied by scanning electron microscopy, thermal analysis, X-ray diffraction, energy-dispersive X-ray, map analysis, and FT-IR spectroscopy. The electrochemical behavior of MTX at CuCr₂O₄/CuO/IL/CPE surface was studied using cyclic voltammetry, differential pulse voltammetry, and electrochemical impedance spectroscopy. After optimization of the experimental parameters, the prepared sensor showed a low detection limit of 25 nM MTX, based on signal-to-noise (S/N = 3), and it can determine in a wide range of 0.1-300 μM in Britton-Robinson buffer solution at pH 2.5. The modified electrode was used to determine MTX concentration in blood and urine samples with good recoveries of 94.1-104.3. This sensor has several advantages such as low cost, easy preparation, high-performance speed and high sensitivity, selectivity, stability, and repeatability. Graphical abstract Scheme of preparation of CuCr₂O₄/CuO nanofibers by electrospinning method and design of a carbon past electrode using prepared nanofibers (CuCr₂O₄/CuO/IL/CPE). This electrode was used for methotrexate determination in plasma and urine samples using differential pulse voltammetry.

Towards establishing standard performance metrics for batteries, supercapacitors and beyond

Electrochemical energy storage (EES) materials and devices should be evaluated against clear and rigorous metrics to realize the true promises as well as the limitations of these fast-moving technologies.

Hydrothermal Synthesized of CoMoO4 Microspheres as Excellent Electrode Material for Supercapacitor

The single-phase CoMoO₄ was prepared via a facile hydrothermal method coupled with calcination treatment at 400 °C. The structures, morphologies, and electrochemical properties of samples with different hydrothermal reaction times were investigated. The microsphere structure, which consisted of nanoflakes, was observed in samples. The specific capacitances at 1 A g^-1 are 151, 182, 243, 384, and 186 F g^-1 for samples with the hydrothermal times of 1, 4, 8, 12, and 24 h, respectively. In addition, the sample with the hydrothermal time of 12 h shows a good rate capability, and there is 45% retention of initial capacitance when the current density increases from 1 to 8 A g^-1. The high retain capacitances of samples show the fine long-cycle stability after 1000 charge-discharge cycles at current density of 8 A g^-1. The results indicate that CoMoO₄ samples could be a choice of excellent electrode materials for supercapacitor.