Non-fullerene Acceptors with a Thieno[3,4-c]pyrrole-4,6-dione (TPD) Core for Efficient Organic Solar Cells

Dimerized Nonfused Electron Acceptor Based on a Thieno[3,4-c]pyrrole-4,6-dione Core for Organic Solar Cells

In this work, the first dimerized nonfused electron acceptor (NFEA), based on thieno[3,4-c]pyrrole-4,6-dione as the core, has been designed and synthesized. The dimerized acceptor and its single counterpart exhibit similar energy levels but different absorption spectra due to their distinct aggregation behavior. The dimerized acceptor-based organic solar cells (OSCs) demonstrate a higher power conversion efficiency of 11.05%, accompanied by enhanced thermal stability. This improvement is attributed to the enhancement of the short-circuit current density and fill factor, along with an increase in the glass transition temperature. Characterizations of exciton dynamics and film morphology reveal that a dimerized acceptor-based device possesses an enhanced exciton dissociation efficiency and a well-established charge transport pathway, explaining its improved photovoltaic performance. All these results indicate that the dimerized NFEA as a promising candidate can achieve efficiency-stability-cost balance in OSCs.

Designing Electron-Deficient Diketone Unit Based Non-Fused Ring Acceptors with Amplified Optoelectronic Features for Highly Efficient Organic Solar Cells: A DFT Study

Organic solar cells (OSCs) made of electron-acceptor and electron-donor materials have significantly developed in the last decade, demonstrating their enormous potential in cutting-edge optoelectronic applications. Consequently, we designed seven novel non-fused ring electron acceptors (NFREAs) (BTIC-U1 to BTIC-U7) using synthesized electron-deficient diketone units and reported end-capped acceptors, a viable route for augmented optoelectronic properties. The DFT and TDDFT approaches were used to measure the power conversion efficiency (PCE), open circuit voltage (Voc), reorganization energies (λ_h, λ_e), fill factor (FF), light harvesting efficiency (LHE) and to evaluate the potential usage of proposed compounds in solar cell applications. The findings confirmed that the photovoltaic, photophysical, and electronic properties of the designed molecules BTIC-U1 to BTIC-U7 are superior to those of reference BTIC-R. The TDM analysis demonstrates a smooth flow of charge from the core to the acceptor groups. Charge transfer analysis of the BTIC-U1:PTB7-Th blend revealed orbital superposition and successful charge transfer from HOMO (PTB7-Th) to LUMO (BTIC-U1). The BTIC-U5 and BTIC-U7 outperformed the reference BTIC-R and other developed molecules in terms of PCE (23.29% and 21.18%), FF (0.901 and 0.894), normalized Voc (48.674 and 44.597), and Voc (1.261 eV and 1.155 eV). The proposed compounds enclose high electron and hole transfer mobilities, making them the ideal candidate for use with PTB7-Th film. As a result, future SM-OSC design should prioritize using these constructed molecules, which exhibit excellent optoelectronic properties, as superior scaffolds.

Advances in organic photovoltaic cells: a comprehensive review of materials, technologies, and performance

This paper provides a comprehensive overview of organic photovoltaic (OPV) cells, including their materials, technologies, and performance. In this context, the historical evolution of PV cell technology is explored, and the classification of PV production technologies is presented, along with a comparative analysis of first, second, and third-generation solar cells. A classification and comparison of PV cells based on materials used is also provided. The working principles and device structures of OPV cells are examined, and a brief comparison between device structures is made, highlighting their advantages, disadvantages, and key features. The various parts of OPV cells are discussed, and their performance, efficiency, and electrical characteristics are reviewed. A detailed SWOT analysis is conducted, identifying promising strengths and opportunities, as well as challenges and threats to the technology. The paper indicates that OPV cells have the potential to revolutionize the solar energy industry due to their low production costs, and ability to produce thin, flexible solar cells. However, challenges such as lower efficiency, durability, and technological limitations still exist. Despite these challenges, the tunability and versatility of organic materials offer promise for future success. The paper concludes by suggesting that future research should focus on addressing the identified challenges and developing new materials and technologies that can further improve the performance and efficiency of OPV cells.

Double-Cable Conjugated Polymers with Pendent Near-Infrared Electron Acceptors for Single-Component Organic Solar Cells

Double-cable conjugated polymers with near-infrared (NIR) electron acceptors are synthesized for use in single-component organic solar cells (SCOSCs). Through the development of a judicious synthetic pathway, the highly sensitive nature of the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC)-based electron acceptors in basic and protonic solvents is overcome. In addition, an asymmetric design motif is adopted to optimize the packing of donor and acceptor segments, enhancing charge separation efficiency. As such, the new double-cable polymers are successfully applied in SCOSCs, providing an efficiency of over 10 % with a broad photo response from 300 to 850 nm and exhibiting excellent thermal/light stability. These results demonstrate the powerful design of NIR-acceptor-based double-cable polymers and will enable SCOSCs to enter a new stage.

Tailoring microstructure and morphology via sequential fluorination to enhance the photovoltaic performance of low-cost polymer donors for organic solar cells

For utilizing the organic solar cells for commercial applications, reducing the overall cost of the photo absorbent materials is also very crucial, along with the realization of high power conversion efficiency (PCE) and excellent stability. Herein, we tried to address such challenge by synergistically controlling the amount of fluorine (F)-substituents (n = 2, 4) on easily scalable, low-cost wide-bandgap molecular design involving alternate fluorinated-thienyl benzodithiophene donor and 2,5-difluoro benzene (2FBn) or 2,3,5,6 tetrafluorobenzene (4FBn) to form two new polymer donors PBDT-2FBn and PBDT-4FBn, respectively. As expected, sequential fluorination causes lowering of the frontier energy levels and planarization of polymer backbone via F···S and C-H···F noncovalent molecular locks, which results in more pronounced molecular packing and enhanced crystallinity from PBDT-2FBn to PBDT-4FBn. By mixing with IT-4F acceptor, PBDT-2FBn:IT-4F-based blend demonstrated favorable molecular orientation with shorter π-π stacking distance, higher carrier mobilities with good trade-off ratio and desirable nanoscale morphology, hence delivered good PCE of 9.3% than PBDT-2FBn:IT-4F counterpart (8.6%). Furthermore, pairing PBDT-2FBn with BTP-BO-4Cl acceptor further improved absorption range and promoted privileged morphology with ideal domain sizes for efficient exciton dissociation and charge transport, resulting in further improvement of PCE to 10.2% with remarkably low energy loss of 0.46 eV, which is seldomly reported in NF-OSCs. Consequently, this study provides valuable guidelines for designing efficient and low-cost polymer donors for organic solar cell applications. This article is protected by copyright. All rights reserved.

Estimating donor:acceptor compatibility for polymer solar cells through nonfused-ring acceptors with benzoxadiazole core and different halogenated terminal groups

Novel nonfused-ring electron acceptors based on a benzoxadiazole-derived core are developed to estimate different miscibility-driven morphologies and donor:acceptor compatibilities.

Synergistic Effects of Chlorination and Branched Alkyl Side Chain on the Photovoltaic Properties of Simple Non-Fullerene Acceptors with Quinoxaline as the Core

To date, the fused-ring electron acceptors show the best photovoltaic performances, and the development of simple non-fullerene acceptors via intramolecular noncovalent interactions can reduce synthetic costs. In this work, four simple non-fullerene acceptors with an A-D-A'-D-A configuration (QCIC1, QCIC2, QCIC3, and QCIC4) were synthesized. They contained the same conjugated backbone (A': quinoxaline; D: cyclopentadithiophene; A: dicyano-indanone) but different halogen atoms and alkyl side chains. Due to the chlorination on the end-groups and the most and/or longest branched alkyl side chains on the backbone, the blended film composed of QCIC3 and donor poly{[2,6'-4,8-di(5-ethylhexylthienyl)benzo [1,2-b : 4,5-b']dithiophene]-alt-[5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c : 4',5'-c']dithiophene-4,8-dione)]} (PBDB-T) exhibited the strongest π-π stacking and the most suitable phase-separation domains among the four blended films. Therefore, the QCIC3-based organic solar cells yielded the highest power conversion efficiency of 10.55 %. This work provides a pathway to optimize the molecular arrangements and enhance the photovoltaic property of simple electron acceptors through subtle chemical modifications.

Simple-structure small molecular acceptors based on a benzodithiophenedione core: synthesis, optoelectronic and photovoltaic properties

The fluorine-free simple-structure acceptor presents matched energy levels and higher charge mobilities, thus enhanced photovoltaic properties.

High-Performance Ternary Polymer Solar Cells Enabled by a New Narrow Bandgap Nonfullerene Small Molecule Acceptor with a Higher LUMO Level

Obtaining a large open-circuit voltage (V_OC ) and high short-circuit current density (J_SC ) simultaneously is important in improving power conversion efficiency (PCE) of organic photovoltaics. The ternary strategy with using a higher lowest unoccupied molecular orbital (LUMO) level nonfullerene acceptor (NFA) guest can achieve increased V_OC , yet J_SC is decreased or maintained, so it's still a challenge to offer increased V_OC and J_SC values concurrently via the newly presented V_OC -increased ternary strategy. To overcome this issue, a new narrow bandgap NFA TT-S-4F is reported by introducing 3,6-dimethoxylthieno[3,2-b]thiophene (TT) as π-spacers to connect electron-rich core with terminal groups, so as to upshift the LUMO level and extend π-system. When adding 10% TT-S-4F into binary system based on PTB7-Th:IEICO-4F, the higher-LUMO-level of TT-S-4F, the increased charge mobilities, the reduced trap-assisted combination loss, and a finer nanofiber structure and increased phase separation size are obtained, which simultaneously promotes J_SC , V_OC , and fill factor (FF), thus obtaining an optimal PCE (12.5% vs 11.5%). This work illustrates that an extending conjugated backbone with large π-spacers and inclusion of alkylthiophenyl side-chains is a concept to synthesize NFA guests for use on the V_OC -increased ternary strategy that enables to realize simultaneously increased J_SC , V_OC , and FF.

Nonfused Nonfullerene Acceptors with an A-D-A'-D-A Framework and a Benzothiadiazole Core for High-Performance Organic Solar Cells

Nonfullerene acceptors (NFAs) have contributed significantly to the progress of organic solar cells (OSCs). However, most NFAs feature a large fused-ring backbone, which usually requires a tedious multiple-step synthesis, and are not applicable to commercial applications. An alternative strategy is to develop nonfused NFAs, which possess synthetic simplicity and facile tunability in optoelectronic properties and solid-state microstructures. In this work, we report two nonfused NFAs, BTCIC and BTCIC-4Cl, based on an A-D-A'-D-A architecture, which possess the same electron-deficient benzothiadiazole central core but different electron-withdrawing terminal groups. The optical properties, energy levels, and molecular crystallinities were finely tuned by changing the terminal groups. Moreover, a decent power conversion efficiency of 9.3 and 10.5% has been achieved by BTCIC and BTCIC-4Cl, respectively, by blending them with an appropriate polymer donor. These results demonstrate the potential of A-D-A'-D-A type nonfused NFAs for high-performance OSCs. Further development of nonfused NFAs will be very fruitful by employing appropriate building blocks and via side-chain optimizations.

Efficient Organic Solar Cells Based on Non-Fullerene Acceptors with Two Planar Thiophene-Fused Perylene Diimide Units

We designed and synthesized two non-fullerene acceptors (CDT-TFP and C8X-TFP), which comprise a central 4H-cyclopenta[2,1-b:3,4-b']dithiophene (CDT) as the bridge and two thiophene-fused perylene diimide (TFP) units. The bulky side chains, such as the 4-hexylphenyl side chains, on the CDT bridge can effectively prevent the acceptor molecules from forming large aggregates, and the π-π stacking of the terminal planar TFP units can form effective electron transport pathways when blending with the donor polymers. These non-fullerene acceptors are used to fabricate organic solar cells (OSCs) by blending with the regioregular middle bandgap polymer reg-PThE. The as-cast devices based on reg-PThE:CDT-TFP show the best power conversion efficiency (PCE) of 8.36% with a V_oc of 1.10 V, J_sc of 12.43 mA cm^-2, and an FF of 61.4%, whereas the analogue perylene diimide (PDI) dimers (CDT-PDI) that comprise two PDI units bridged with a CDT unit show only a 2.59% PCE with a V_oc of 0.92 V, J_sc of 6.82 mA cm^-2, and an FF of 41.5%. Our results have demonstrated that the non-fullerene acceptors comprising planar PDI units can achieve excellent photovoltaic performance and provide meaningful guidelines for the design of PDI-based non-fullerene electron acceptors for efficient OSCs.

Thieno[3,4-c]pyrrole-4,6-dione-based conjugated polymers for organic solar cells

Thieno[3,4-c]pyrrole-4,6-dione (TPD) based conjugated polymers as an electron donor, acceptor and single-component for application in organic solar cells in the past ten years have been intensively reviewed in this Feature Article.