Differential mechanical response and microstructural organization between non-human primate femoral and carotid arteries

Single-Cell RNA sequencing investigation of female-male differences under PAD conditions

Peripheral arterial disease (PAD) is an age-related medical condition affecting mostly muscular arteries of the limb. It is the 3rd leading cause of atherosclerotic morbidity. The mechanical environment of endothelial cells (ECs) in PAD is characterized by disturbed blood flow (d-flow) and stiff extracellular matrices. In PAD, the stiffness of arteries is due to decreased elastin function and increased collagen content. These flow and stiffness parameters are largely missing from current models of PAD. It has been previously proven that ECs exposed to d-flow or stiff substrates lead to proatherogenic pathways, but the effect of both, d-flow and stiffness, on EC phenotype has not been fully investigated. In this study, we sought to explore the effect of sex on proatherogenic pathways that could result from exposing endothelial cells to a d-flow and stiff environment. We utilized the scRNA-seq tool to analyze the gene expression of ECs exposed to the different mechanical conditions both in vitro and in vivo. We found that male ECs exposed to different mechanical stimuli presented higher expression of genes related to fibrosis and d-flow in vitro. We validated our findings in vivo by exposing murine carotid arteries to d-flow via partial carotid artery ligation. Since women have delayed onset of arterial stiffening and subsequent PAD, this work may provide a framework for some of the pathways in which biological sex interacts with sex-based differences in PAD.

Plasticity and Enzymatic Degradation Coupled With Volumetric Growth in Pulmonary Hypertension Progression

Pulmonary hypertension (PH) is one of the least understood and highly elusive cardiovascular conditions associated with elevated pulmonary arterial pressure. Although the disease mechanisms are not completely understood, evidence has accumulated from human and animal studies that irreversible processes of pulmonary arterial wall damage, compensated by stress-mediated growth, play critical roles in eliciting the mechanisms of disease progression. The aim of this study is to develop a thermodynamic modeling structure of the pulmonary artery to consider coupled plastic-degradation-growth irreversible processes to investigate the mechanical roles of the dissipative phenomena in the disease progression. The proposed model performs a model parameter study of plastic deformation and degradation processes coupled with dissipative growth subjected to elevated pulmonary arterial pressure and computationally generates in silico simulations of PH progression using the clinical features of PH, found in human morphological and mechanical data. The results show that considering plastic deformation can provide a much better fitting of the ex vivo inflation tests than a widely used pure hyperelastic model in higher pressure conditions. In addition, the parameter sensitivity study illustrates that arterial damage and growth cause the increased stiffness, and the full simulation (combining elastic-plastic-degradation-growth models) reveals a key postpathological recovery process of compensating vessel damage by vascular adaptation by reducing the rate of vessel dilation and mediating vascular wall stress. Finally, the simulation results of luminal enlargement, arterial thickening, and arterial stiffness for an anisotropic growth are found to be close to the values from the literature.

3D Bioprinted Multicellular Vascular Models

3D bioprinting is an emerging additive manufacturing technique to fabricate constructs for human disease modeling. However, current cell-laden bioinks lack sufficient biocompatibility, printability, and structural stability needed to translate this technology to preclinical and clinical trials. Here, a new class of nanoengineered hydrogel-based cell-laden bioinks is introduced, that can be printed into 3D, anatomically accurate, multicellular blood vessels to recapitulate both the physical and chemical microenvironments of native human vasculature. A remarkably unique characteristic of this bioink is that regardless of cell density, it demonstrates a high printability and ability to protect encapsulated cells against high shear forces in the bioprinting process. 3D bioprinted cells maintain a healthy phenotype and remain viable for nearly one-month post-fabrication. Leveraging these properties, the nanoengineered bioink is printed into 3D cylindrical blood vessels, consisting of living co-culture of endothelial cells and vascular smooth muscle cells, providing the opportunity to model vascular function and pathophysiology. Upon cytokine stimulation and blood perfusion, this 3D bioprinted vessel is able to recapitulate thromboinflammatory responses observed only in advanced in vitro preclinical models or in vivo. Therefore, this 3D bioprinted vessel provides a potential tool to understand vascular disease pathophysiology and assess therapeutics, toxins, or other chemicals.

Intimal Hyperplasia and Arteriovenous Fistula Failure: Looking Beyond Size Differences

The development of venous intimal hyperplasia (IH) has been historically associated with failure of arteriovenous fistulas (AVF) used for hemodialysis. This long-standing assumption, based on histological observations, has been recently challenged by clinical studies indicating that the size of the intima by itself is not enough to explain stenosis or AVF maturation failure. Irrespective of this lack of association, IH is present in most native veins and fistulas, is prominent in many cases, and suggests a role in the vein that may not be reflected by its dimensions. Therefore, the contribution of IH to AVF dysfunction remains controversial. Using only clinical data and avoiding extrapolations from animal models, we critically discuss the biological significance of IH in vein remodeling, vascular access function, and the response of the venous wall to repeated trauma in hemodialysis patients. We address questions and pose new ones such as: What are the factors that contribute to IH in pre-access veins and AVFs? Do cellular phenotypes and composition of the intima influence AVF function? Are there protective roles of the venous intima? This review explores these possibilities, with hopes of rekindling a critical discussion about venous IH that goes beyond thickness and AVF outcomes.

Sickle Cell Anemia Mediates Carotid Artery Expansive Remodeling That Can Be Prevented by Inhibition of JNK (c-Jun N-Terminal Kinase)

OBJECTIVE

Sickle cell anemia (SCA) causes chronic inflammation and multiorgan damage. Less understood are the arterial complications, most evident by increased strokes among children. Proteolytic mechanisms, biomechanical consequences, and pharmaceutical inhibitory strategies were studied in a mouse model to provide a platform for mechanistic and intervention studies of large artery damage due to sickle cell disease. Approach and Results: Townes humanized transgenic mouse model of SCA was used to test the hypothesis that elastic lamina and structural damage in carotid arteries increased with age and was accelerated in mice homozygous for SCA (sickle cell anemia homozygous genotype [SS]) due to inflammatory signaling pathways activating proteolytic enzymes. Elastic lamina fragmentation observed by 1 month in SS mice compared with heterozygous littermate controls (sickle cell trait heterozygous genotype [AS]). Positive immunostaining for cathepsin K, a powerful collagenase and elastase, confirmed accelerated proteolytic activity in SS carotids. Larger cross-sectional areas were quantified by magnetic resonance angiography and increased arterial compliance in SS carotids were also measured. Inhibiting JNK (c-jun N-terminal kinase) signaling with SP600125 significantly reduced cathepsin K expression, elastin fragmentation, and carotid artery perimeters in SS mice. By 5 months of age, continued medial thinning and collagen degradation was mitigated by treatment of SS mice with JNK inhibitor.

CONCLUSIONS

Arterial remodeling due to SCA is mediated by JNK signaling, cathepsin proteolytic upregulation, and degradation of elastin and collagen. Demonstration in Townes mice establishes their utility for mechanistic studies of arterial vasculopathy, related complications, and therapeutic interventions for large artery damage due to SCA.

Improving Surgical Methods for Studying Vascular Grafts in Animal Models

While clinical vascular grafting uses an end-to-side surgical method, researchers primarily use end-to-end implant techniques in preclinical models. This may be due in part to the limitations of using small animal models in research. The work presented here provides support and evidence for the improvement of vascular graft implant techniques by demonstrating the successful implantation of experimental grafts into both large and small animal models. Specifically, models of aortoiliac baboon (Papio anubis) bypass and common carotid rabbit (Oryctolagus cuniculus) bypass were used to test vascular grafts for thrombosis and vascular healing after 1 month using an end-to-side anastomosis grafting procedure. Patency was evaluated with ultrasound or histological techniques, and neointimal growth was quantified with histology. In the development of this procedure for small animals, both an end-to-end/end-to-side and an end-to-side/end-to-side configuration were tested in rabbits. One hundred percent of rabbit implants (2/2) with an end-to-end/end-to-side configuration were patent at explant. However, with the end-to-side/end-to-side configuration, 66% (6/9) of rabbit implants and 93% (13/14) of baboon implants remained patent at 1 month, suggesting the importance of replicating the end-to-side method for testing vascular grafts for clinical use. This study describes feasible preclinical surgical procedures, which simulate clinical vascular bypass grafts even in small animals. Widespread implementation of these end-to-side surgical techniques in these or other animals should improve the quality of experimental, preclinical testing and ultimately increase the likelihood of translating new vascular graft technologies into clinical applications.

The small heat shock protein HSPB1 protects mice from sepsis

In vitro studies have implicated the small heat shock protein HSPB1 in a range of physiological functions. However, its in vivo relevance is unclear as the phenotype of unstressed HSPB1^−/− mice is unremarkable. To determine the impact of HSPB1 in injury, HSPB1^−/− and wild type (WT) mice were subjected to cecal ligation and puncture, a model of polymicrobial sepsis. Ten-day mortality was significantly higher in HSPB1^−/− mice following the onset of sepsis (65% vs. 35%). Ex vivo mechanical testing revealed that common carotid arteries from HSPB1^−/− mice were more compliant than those in WT mice over pressures of 50–120 mm Hg. Septic HSPB1^−/− mice also had increased peritoneal levels of IFN-γ and decreased systemic levels of IL-6 and KC. There were no differences in frequency of either splenic CD4⁺ or CD8⁺ T cells, nor were there differences in apoptosis in either cell type. However, splenic CD4⁺ T cells and CD8⁺ T cells from HSPB1^−/− mice produced significantly less TNF and IL-2 following ex vivo stimulation. Systemic and local bacterial burden was similar in HSPB1^−/− and WT mice. Thus while HSPB1^−/− mice are uncompromised under basal conditions, HSPB1 has a critical function in vivo in sepsis, potentially mediated through alterations in arterial compliance and the immune response.

Mechanical characterization of arteries affected by fetal growth restriction in guinea pigs (Cavia porcellus)

Fetal growth restriction (FGR) is a perinatal condition associated with a low birth weight that results mainly from maternal and placental constrains. Newborns affected by this condition are more likely to develop in the long term cardiovascular diseases whose origins would be in an altered vascular structure and function defined during fetal development. Thus, this study presents the modeling and numerical simulation of systemic vessels from guinea pig fetuses affected by FGR. We aimed to characterize the biomechanical properties of the arterial wall of FGR-derived the aorta, carotid, and femoral arteries by performing ring tensile and ring opening tests and, based on these data, to simulate the biomechanical behavior of FGR vessels under physiological conditions. The material parameters were first obtained from the experimental data of the ring tensile test. Then, the residual stresses were determined from the ring opening test and taken as initial stresses in the simulation of the ring tensile test. These two coupled steps are iteratively considered in a nonlinear least-squares algorithm to obtain the final material parameters. Then, the stress distribution changes along the arterial wall under physiological pressure were quantified using the adjusted material parameters. Overall, the obtained results provide a realistic approximation of the residual stresses and the changes in the mechanical behavior under physiological conditions.

Disturbed Flow Promotes Arterial Stiffening Through Thrombospondin-1

BACKGROUND

Arterial stiffness and wall shear stress are powerful determinants of cardiovascular health, and arterial stiffness is associated with increased cardiovascular mortality. Low and oscillatory wall shear stress, termed disturbed flow (d-flow), promotes atherosclerotic arterial remodeling, but the relationship between d-flow and arterial stiffness is not well understood. The objective of this study was to define the role of d-flow on arterial stiffening and discover the relevant signaling pathways by which d-flow stiffens arteries.

METHODS

D-flow was induced in the carotid arteries of young and old mice of both sexes. Arterial stiffness was quantified ex vivo with cylindrical biaxial mechanical testing and in vivo from duplex ultrasound and compared with unmanipulated carotid arteries from 80-week-old mice. Gene expression and pathway analysis was performed on endothelial cell-enriched RNA and validated by immunohistochemistry. In vitro testing of signaling pathways was performed under oscillatory and laminar wall shear stress conditions. Human arteries from regions of d-flow and stable flow were tested ex vivo to validate critical results from the animal model.

RESULTS

D-flow induced arterial stiffening through collagen deposition after partial carotid ligation, and the degree of stiffening was similar to that of unmanipulated carotid arteries from 80-week-old mice. Intimal gene pathway analyses identified transforming growth factor-β pathways as having a prominent role in this stiffened arterial response, but this was attributable to thrombospondin-1 (TSP-1) stimulation of profibrotic genes and not changes to transforming growth factor-β. In vitro and in vivo testing under d-flow conditions identified a possible role for TSP-1 activation of transforming growth factor-β in the upregulation of these genes. TSP-1 knockout animals had significantly less arterial stiffening in response to d-flow than wild-type carotid arteries. Human arteries exposed to d-flow had similar increases TSP-1 and collagen gene expression as seen in our model.

CONCLUSIONS

TSP-1 has a critical role in shear-mediated arterial stiffening that is mediated in part through TSP-1's activation of the profibrotic signaling pathways of transforming growth factor-β. Molecular targets in this pathway may lead to novel therapies to limit arterial stiffening and the progression of disease in arteries exposed to d-flow.

A Novel Approach to Assess the In Situ Versus Ex Vivo Mechanical Behaviors of the Coronary Artery

Ex vivo mechanical testing has provided tremendous insight toward prediction of the in vivo mechanical behavior and local mechanical environment of the arterial wall; however, the role of perivascular support on the local mechanical behavior of arteries is not well understood. Here, we present a novel approach for quantifying the impact of the perivascular support on arterial mechanics using intravascular ultrasound (IVUS) on cadaveric porcine hearts. We performed pressure-diameter tests (n = 5) on the left anterior descending coronary arteries (LADCAs) in situ while embedded in their native perivascular environment using IVUS imaging and after removal of the perivascular support of the artery. We then performed standard cylindrical biaxial testing on these vessels ex vivo and compared the results. Removal of the perivascular support resulted in an upward shift of the pressure-diameter curve. Ex vivo testing, however, showed significantly lower circumferential compliance compared to the in situ configuration. On a second set of arteries, local axial stretch ratios were quantified (n = 5) along the length of the arteries. The average in situ axial stretch ratio was 1.28 ± 0.16; however, local axial stretch ratios showed significant variability, ranging from 1.01 to 1.70. Taken together, the data suggest that both the perivascular loading and the axial tethering have an important role in arterial mechanics. Combining nondestructive testing using IVUS with traditional ex vivo cylindrical biaxial testing yields a more comprehensive assessment of the mechanical behavior of arteries.

Towards the development of an in vitro model of atherosclerotic peripheral vessels for evaluating drug-coated endovascular technologies

Here, we review the in vitro models used to evaluate drug-coated endovascular technologies. The models are assessed in the context of representing the drug transport/uptake and mechanical properties of atherosclerotic peripheral vessels. Studies to date have incorporated a vessel-simulating hydrogel compartment to examine drug elution from endovascular devices. However, comparisons between in vitro models and atherosclerotic tissue are difficult because ex vivo data are limited in their applicability to diseased peripheral vessels. Furthermore, appropriate ex vivo mechanical properties are not incorporated into these models. Therefore, there is a need to characterise the drug transport/uptake properties of appropriate atherosclerotic tissue and incorporate existing ex vivo mechanical data into current in vitro models to more accurately represent drug behaviour in atherosclerotic peripheral vessels.

Artery buckling analysis using a two-layered wall model with collagen dispersion

Artery buckling has been proposed as a possible cause for artery tortuosity associated with various vascular diseases. Since microstructure of arterial wall changes with aging and diseases, it is essential to establish the relationship between microscopic wall structure and artery buckling behavior. The objective of this study was to developed arterial buckling equations to incorporate the two-layered wall structure with dispersed collagen fiber distribution. Seven porcine carotid arteries were tested for buckling to determine their critical buckling pressures at different axial stretch ratios. The mechanical properties of these intact arteries and their intima-media layer were determined via pressurized inflation test. Collagen alignment was measured from histological sections and modeled by a modified von-Mises distribution. Buckling equations were developed accordingly using microstructure-motivated strain energy function. Our results demonstrated that collagen fibers disperse around two mean orientations symmetrically to the circumferential direction (39.02°±3.04°) in the adventitia layer; while aligning closely in the circumferential direction (2.06°±3.88°) in the media layer. The microstructure based two-layered model with collagen fiber dispersion described the buckling behavior of arteries well with the model predicted critical pressures match well with the experimental measurement. Parametric studies showed that with increasing fiber dispersion parameter, the predicted critical buckling pressure increases. These results validate the microstructure-based model equations for artery buckling and set a base for further studies to predict the stability of arteries due to microstructural changes associated with vascular diseases and aging.

A constitutive modeling interpretation of the relationship among carotid artery stiffness, blood pressure, and age in hypertensive subjects

Aging has a profound influence on arterial wall structure and function. We have previously reported the relationship among pulse wave velocity, age, and blood pressure in hypertensive subjects. In the present study, we aimed for a quantitative interpretation of the observed changes in wall behavior with age using a constitutive modeling approach. We implemented a model of arterial wall biomechanics and fitted this to the group-averaged pressure-area ( P-A) relationship of the “young” subgroup of our study population. Using this model as our take-off point, we assessed which parameters had to be changed to let the model describe the “old” subgroup’s P-A relationship. We allowed elastin stiffness and collagen recruitment parameters to vary and adjusted residual stress parameters according to published age-related changes. We required wall stress to be homogeneously distributed over the arterial wall and assumed wall stress normalization with age by keeping average “old” wall stress at the “young” level. Additionally, we required axial force to remain constant over the cardiac cycle. Our simulations showed an age-related shift in pressure-load bearing from elastin to collagen, caused by a decrease in elastin stiffness and a considerable increase in collagen recruitment. Correspondingly, simulated diameter and wall thickness increased by about 20 and 17%, respectively. The latter compared well with a measured thickness increase of 21%. We conclude that the physiologically realistic changes in constitutive properties we found under physiological constraints with respect to wall stress could well explain the influence of aging in the stiffness-pressure-age pattern observed.

Effects of age on the physiological and mechanical characteristics of human femoropopliteal arteries

Surgical and interventional therapies for peripheral artery disease (PAD) are notorious for high rates of failure. Interactions between the artery and repair materials play an important role, but comprehensive data describing the physiological and mechanical characteristics of human femoropopliteal arteries are not available. Fresh femoropopliteal arteries were obtained from 70 human subjects (13-79 years old), and in situ vs. excised arterial lengths were measured. Circumferential and longitudinal opening angles were determined for proximal superficial femoral, proximal popliteal and distal popliteal arteries. Mechanical properties were assessed by multi-ratio planar biaxial extension, and experimental data were used to calculate physiological stresses and stretches, in situ axial force and anisotropy. Verhoeff-Van Gieson-stained axial and transverse arterial sections were used for histological analysis. Most specimens demonstrated nonlinear deformations and were more compliant longitudinally than circumferentially. In situ axial pre-stretch decreased 0.088 per decade of life. In situ axial force and axial stress also decreased with age, but circumferential physiological stress remained constant. Physiological circumferential stretch decreased 55-75% after 45 years of age. Histology demonstrated a thickened external elastic lamina with longitudinally oriented elastin that was denser in smaller, younger arteries. Axial elastin likely regulates axial pre-stretch to help accommodate the complex deformations required of the artery wall during locomotion. Degradation and fragmentation of elastin as a consequence of age, cyclic mechanical stress and atherosclerotic arterial disease may contribute to decreased in situ axial pre-stretch, predisposing to more severe kinking of the artery during limb flexion and loss of energy-efficient arterial function.