A universal adhesive incorporating antimicrobial peptide nisin: effects on Streptococcus mutans and saliva-derived multispecies biofilms

Addition of nisin to high-viscosity glass-ionomer cement: a comparative in vitro study on antibacterial and physical properties

PURPOSE

Nisin is a lantibiotic effective against Gram-positive microorganisms such as Streptococcus mutans. The study aimed to determine the effect of the addition of nisin to high-viscosity glass-ionomer cement (HVGIC) on its antibacterial activity, setting time, surface microhardness, and compressive strength.

METHODS

1 and 3% w/w nisin were added to HVGIC before mixing. Unmodified HVGIC was the control. Agar disc diffusion, direct contact test, and scanning electron microscopy (SEM) analysis were used to evaluate antibacterial activity against S. mutans. Setting time, surface microhardness, and compressive strength were measured using Gilmore needle apparatus, digital microhardness tester, and universal testing machine, respectively. Statistical analysis included Student's t test, one-way ANOVA with Tamhane's post hoc test, and repeated-measures ANOVA.

RESULTS

As evidenced by the agar disc diffusion (p < 0.001), direct contact tests (p = 0.025), and SEM analysis of the S. mutans cell count and cell surface area (p = 0.049 and 0.003), 3% nisin had the strongest antibacterial activity. There was a dose-dependent increase in setting time (p = 0.005) and surface microhardness (p = 0.006), with no significant difference in compressive strength compared to control.

CONCLUSION

The addition of 3% nisin to HVGIC enhances the antibacterial action against S. mutans and surface microhardness without adversely affecting setting time and compressive strength.

A Comprehensive Review of Recent Research into the Effects of Antimicrobial Peptides on Biofilms-January 2020 to September 2023

Microbial biofilm formation creates a persistent and resistant environment in which microorganisms can survive, contributing to antibiotic resistance and chronic inflammatory diseases. Increasingly, biofilms are caused by multi-drug resistant microorganisms, which, coupled with a diminishing supply of effective antibiotics, is driving the search for new antibiotic therapies. In this respect, antimicrobial peptides (AMPs) are short, hydrophobic, and amphipathic peptides that show activity against multidrug-resistant bacteria and biofilm formation. They also possess broad-spectrum activity and diverse mechanisms of action. In this comprehensive review, 150 publications (from January 2020 to September 2023) were collected and categorized using the search terms 'polypeptide antibiotic agent', 'antimicrobial peptide', and 'biofilm'. During this period, a wide range of natural and synthetic AMPs were studied, of which LL-37, polymyxin B, GH12, and Nisin were the most frequently cited. Furthermore, although many microbes were studied, Staphylococcus aureus and Pseudomonas aeruginosa were the most popular. Publications also considered AMP combinations and the potential role of AMP delivery systems in increasing the efficacy of AMPs, including nanoparticle delivery. Relatively few publications focused on AMP resistance. This comprehensive review informs and guides researchers about the latest developments in AMP research, presenting promising evidence of the role of AMPs as effective antimicrobial agents.

A low-shrinkage-stress and anti-bacterial adherent dental resin composite: physicochemical properties and biocompatibility

Polymerisation shrinkage and biofilm accumulation are the two main problems associated with dental resin composites (DRCs) that induce secondary caries, which can cause restoration failure. Polymerisation shrinkage can lead to microleakage gaps between the tooth and the DRCs, causing the aggregation of bacteria and development of secondary caries. Reducing the shrinkage stress (SS) and improving the resistance to bacterial adhesion have always been the focus of this field in modifying DRCs. A thiol-ene resin system can effectively reduce the polymerisation SS via its step-growth mechanism for delaying the gel point. Fluorinated compounds can reduce the surface free energies, thereby reducing bacterial adhesion. Thus, in this study, a range of mass fractions (0, 10, 20, 30, and 40 wt%) of a fluorinated thiol-ene resin system were added to a fluorinated dimethacrylate resin system/tricyclo decanedimethanol diacrylate to create a fluorinated methacrylate-thiol-ene ternary resin matrix. DRCs were prepared using the obtained ternary resin matrix, and their physical and chemical properties, effect on bacterial adhesion, and biocompatibility were investigated. The results demonstrated that the volumetric shrinkage and SS of the DRCs were reduced with no reduction in conversion degree even after the thiol-ene resin system was added. All DRC-based fluorinated resin systems exhibited an excellent anti-bacterial adhesion effect, as evidenced by the colony-forming unit counts, live/dead bacterial staining, and crystal violet staining tests against Streptococcus mutans (S. mutans). The genetic expressions associated with the bacterial adhesion of S. mutans were substantially affected after being cultured with fluorinated DRCs. All fluorinated DRCs demonstrated good biocompatibility through the in vitro cytotoxicity test and live/dead staining images of the L-929 cells. The above results illustrate that the DRCs based on the fluorinated methacrylate-thiol-ene resin matrix can be potentially applied in clinical practice due to their low SS and anti-bacterial adhesion effect.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

In Vivo Effect of a Nisin–Biogel on the Antimicrobial and Virulence Signatures of Canine Oral Enterococci

Periodontal disease is a relevant oral disease in dogs and nisin–biogel has been previously proposed to be used in its control. Enterococci, as inhabitants of the oral cavity with a high genetic versatility, are a reliable bacterial model for antimicrobial studies. Our goal was to evaluate the in vivo influence of the long-term dental application of the nisin–biogel on the virulence and antimicrobial signatures of canine oral enterococci. Twenty dogs were randomly allocated to one of two groups (treatment group—TG with nisin–biogel dental application, or control group—CG without treatment) and submitted to dental plaque sampling at day 0 and after 90 days (T90). Samples were processed for Enterococcus spp. isolation, quantification, identification, molecular typing and antimicrobial and virulence characterization. From a total of 140 enterococci, molecular typing allowed us to obtain 70 representative isolates, mostly identified as E. faecalis and E. faecium. No significant differences (p > 0.05) were observed in the virulence index of the isolates obtained from samples collected from the TG and CG at T90. At T90, a statistically significant difference (p = 0.0008) was observed in the antimicrobial resistance index between the isolates from the TC and CG. Oral enterococci were revealed to be reservoirs of high resistant and virulent phenotypes.

Peptides in Dentistry: A Scoping Review

Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.

In Vivo Evaluation of the Efficacy of a Nisin-Biogel as a New Approach for Canine Periodontal Disease Control

Periodontal disease (PD) is a common oral disease in dogs. Recent in vitro research revealed that nisin−biogel is a promising compound for canine PD control. In this work, a clinical trial was developed to assess the in vivo efficacy of nisin−biogel in dogs by determining the dental plaque index (DPI), gingivitis index (GI), and periodontal pocket depth (PPD) after dental administration. The biogel’s influence on aerobic bacteria counts was also evaluated, as well as its acceptance/adverse effects in dogs. Twenty animals were allocated to one of two groups: a treatment group (TG) subjected to a dental topical application of nisin−biogel for 90 days and a control group (CG) with no treatment. Besides daily monitoring, on day 1 (T0) and at the end of the assay (T90), animals were subjected to blood analysis, periodontal evaluation, dental plaque sampling, scaling, and polishing. Statistical analysis with mixed models showed a significant reduction in mean PPD (estimate = −0.371, p-value < 0.001) and DPI (estimate = −0.146, p-value < 0.05) in the TG animals at T90. A reduction in the GI (estimate = −0.056, p-value > 0.05) was also observed but with no statistical significance. No influence on total bacterial counts was observed, and no adverse effects were detected. The nisin−biogel was revealed to be a promising compound for canine PD control.

Detecting the Mechanism of Action of Antimicrobial Peptides by Using Microscopic Detection Techniques

Increasing antibiotic resistance has shifted researchers’ focus to antimicrobial peptides (AMPs) as alternatives to antibiotics. AMPs are small, positively charged, amphipathic peptides with secondary helical structures. They have the ability to disrupt the bacterial membrane and create wedges due to electrostatic differences. Water molecules enter the pathogens through those wedges and disrupt their normal cellular functioning, eventually causing the death of the pathogens. Keeping in mind the importance of AMPs, this review compiles recent data and is divided into three parts. The first part explains the AMP structure and properties, the second part comprises the spectroscopy techniques currently used for evaluating the AMP-bacterial targeting mechanism as well as its structure and safety; and the third part describes the production of AMPs from an animal source (whey protein). Most of the peptides that were used in recent studies have been either the precursors of a natural peptide or synthetic peptides with some modifications, but data on the exploitation of dairy protein are scarce. Among the little-studied milk proteins and peptides, in the last three years, whey protein has been studied the least based on the reported data. Because whey protein is a leftover part of cheese making that often drains out as cheese waste, causing soil and environmental pollution, today, the need of the hour is to produce safe AMPs from whey protein. The use of whey protein that is based on hydrolyzing lactic acid bacteria with some structural modifications can increase AMPs’ potency, stability, and safety, and it can also help to avoid soil and environmental pollution as a result of whey drainage.

Development of an Antibacterial Dentin Adhesive

Nisin is a peptide that possesses potent antibacterial properties. This study evaluated the antibacterial activity of a nisin-doped adhesive against Streptococcus mutans, as well as its degree of conversion and microtensile bond strength (μTBS) to dentin. Nisin was added to the adhesive Adper Single Bond 2 (3M ESPE), resulting in four groups: Control Group (Single Bond 2); Group 1% (1 wt% nisin-incorporated), Group 3% (3 wt% nisin-incorporated) and Group 5% (5 wt% nisin-incorporated). Antibacterial activity against S. mutans was evaluated using colony-forming unit counts (CFU). The degree of conversion was tested using FTIR. Forty human teeth were restored for μTBS evaluation. Data were statistically analyzed with ANOVA and Tukey tests at α = 0.05. The nisin-doped adhesives, for all concentrations, exhibited a significant inhibition of the growth of S. mutans (p < 0.05); Incorporation of 5% and 3% nisin decreased the degree of conversion of the adhesive (p < 0.05). The μTBS (in MPa): Control Group—38.3 ± 2.3A, Group 1%—35.6 ± 2.1A, Group 3%—27.1 ± 1.6B and Group 5%—22.3 ± 1.0C. Nisin-doped adhesives exerted a bactericidal effect on S. mutans. The μTBS and degree of conversion of adhesive were not affected after incorporation of 1% nisin.

Physical/Mechanical and Antibacterial Properties of Orthodontic Adhesives Containing Calcium Phosphate and Nisin

Enamel demineralization around orthodontic adhesive is a common esthetic concern during orthodontic treatment. The aim of this study was to prepare orthodontic adhesives containing monocalcium phosphate monohydrate (MCPM) and nisin to enable mineralizing and antibacterial actions. The physicomechanical properties and the inhibition of S. mutans growth of the adhesives with added MCPM (5, 10 wt %) and nisin (5, 10 wt %) were examined. Transbond XT (Trans) was used as the commercial comparison. The adhesive containing a low level of MCPM showed significantly higher monomer conversion (42–62%) than Trans (38%) (p < 0.05). Materials with additives showed lower monomer conversion (p < 0.05), biaxial flexural strength (p < 0.05), and shear bond strength to enamel than those of a control. Additives increased water sorption and solubility of the experimental materials. The addition of MCPM encouraged Ca and P ion release, and the precipitation of calcium phosphate at the bonding interface. The growth of S. mutans in all the groups was comparable (p > 0.05). In conclusion, experimental orthodontic adhesives with additives showed comparable conversion but lesser mechanical properties than the commercial material. The materials showed no antibacterial action, but exhibited ion release and calcium phosphate precipitation. These properties may promote remineralization of the demineralized enamel.

Strategies toward development of antimicrobial biomaterials for dental healthcare applications

Several approaches for elimination of oral pathogens are being explored at the present time since oral diseases remain prevalent affecting approximately 3.5 billion people worldwide. Need for antimicrobial biomaterials in dental healthcare include but is not restricted to designing resin composites and adhesives for prevention of dental caries. Constant efforts are also being made to develop antimicrobial strategies for clearance of endodontic space prior root canal treatment and for treatment of periimplantitis and periodontitis. This article discusses various conventional and nanotechnology-based strategies to achieve antimicrobial efficacy in dental biomaterials. Recent developments in the design and synthesis of antimicrobial peptides and antifouling zwitterionic polymers to effectively lessen the risks of antimicrobial drug resistance are also outlined in this review. Further, the role of contemporary strategies such as use of smart biomaterials, ionic solvent-based biomaterials and quorum quenchers incorporated biomaterials in the elimination of dental pathogens are described in detail. Lastly, we mentioned the approach of using polymers to print custom-made three-dimensional antibacterial dental products via additive manufacturing technologies. This review provides a critical perspective on the chemical, biomimetic, and engineering strategies intended for developing antimicrobial biomaterials that have the potential to substantially improve the dental health.

A Bioengineered Nisin Derivative To Control Streptococcus uberis Biofilms

Antimicrobial peptides are evolving as novel therapeutic options against the increasing problem of multidrug-resistant microorganisms, and nisin is one such avenue. However, some bacteria possess a specific nisin resistance system (NSR), which cleaves the peptide reducing its bactericidal efficacy. NSR-based resistance was identified in strains of Streptococcus uberis, a ubiquitous pathogen that causes mastitis in dairy cattle. Previous studies have demonstrated that a nisin A derivative termed nisin PV, featuring S29P and I30V, exhibits enhanced resistance to proteolytic cleavage by NSR. Our objective was to investigate the ability of this nisin derivative to eradicate and inhibit biofilms of S. uberis DPC 5344 and S. uberis ATCC 700407 (nsr⁺) using crystal violet (biomass), 2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide (XTT) (viability) assays, and confocal microscopy (viability and architecture). When preestablished biofilms were assessed, both peptides reduced biofilm biomass by over 60% compared to that of the untreated controls. However, a 42% higher reduction in viability was observed following treatment with nisin PV compared to that of nisin A. Accordingly, confocal microscopy analysis revealed significantly more dead cells on the biofilm upper surface and a reduced thickness following treatment with nisin PV. When biofilm inhibition was assessed, nisin PV inhibited biofilm formation and decreased viability up to 56% and 85% more than nisin A, respectively. Confocal microscopy analysis revealed a lack of biofilm for S. uberis ATCC 700407 and only dead cells for S. uberis DPC 5344. These results suggest that nisin PV is a promising alternative to effectively reduce the biofilm formation of S. uberis strains carrying NSR. IMPORTANCE One of the four most prevalent species of bovine mastitis-causing pathogens is S. uberis. Its ability to form biofilms confers on the bacteria greater resistance to antibiotics, requiring higher doses to be more effective. In a bid to limit antibiotic resistance development, the need for alternative antimicrobials is paramount. Bacteriocins such as nisin represent one such alternative that could alleviate the impact of mastitis caused by S. uberis. However, many strains of S. uberis have been shown to possess nisin resistance determinants, such as the nisin resistance protein (NSR). In this study, we demonstrate the ability of nisin and a nisin derivative termed PV that is insensitive to NSR to prevent and remove biofilms of NSR-producing S. uberis strains. These findings will add new information to the antimicrobial bacteriocins and control of S. uberis research fields specifically in relation to biofilms and nsr⁺ mastitis-associated strains.

Bibliometric Analysis of Literature Published on Antibacterial Dental Adhesive from 1996-2020

This study aimed to investigate the current state of research on antibacterial dental adhesives. The interest in this field can be drawn from an increasing number of scholarly works in this area. However, there is still a lack of quantitative measurement of this topic. The main aim of this study was to consolidate the research published on the antibacterial adhesive from 1996 to 2020 in Web of Science indexed journals. The bibliometric method, a quantitative study of investigating publishing trends and patterns, was used for this study. The result has shown that a gradual increase in research was found, whereby a substantial increase was observed from 2013. A total of 248 documents were published in 84 journals with total citations of 5107. The highly cited articles were published mainly in Q1 category journals. Most of the published articles were from the USA, China, and other developed countries; however, some developing countries contributed as well. The authorship pattern showed an interdisciplinary and collaborative approach among researchers. The thematic evaluation of keywords along with a three-factor analysis showed that 'antibacterial adhesives' and 'quaternary ammonium' have been used commonly. This bibliometric analysis can provide direction not only to researchers but also to funding organizations and policymakers.

Monomer conversion, biaxial flexural strength, apatite forming ability of experimental dual-cured and self-adhesive dental composites containing calcium phosphate and nisin

The aim was to develop dual-cured, self-adhesive composites containing monocalcium phosphate monohydrate (MCPM, 8 or 4 wt%) and nisin (6 or 3 wt%) with added adhesive monomer. The effect of additives on monomer conversion (MC), biaxial flexural strength (BFS), dentin shear bond strength (SBS), and surface apatite formation were examined. All experimental composites showed light-activated MC (70-75%) higher than the commercial self-adhesive composite (Vertise Flow; VF, 65%). The additives reduced BFS of the composites from 217 to 133 MPa. SBS of the experimental composites (2-6 MPa) was lower than that of VF (12 MPa). Rising MCPM level enabled apatite-like crystals precipitated on the surface of composites after immersion in simulated body fluid for 4 weeks. The additives showed negligible effect on MC and SBS. Rising level of additives reduced strength of the composites but the values were still higher than that required by the standard.

Harnessing biomolecules for bioinspired dental biomaterials

Dental clinicians have relied for centuries on traditional dental materials (polymers, ceramics, metals, and composites) to restore oral health and function to patients. Clinical outcomes for many crucial dental therapies remain poor despite many decades of intense research on these materials. Recent attention has been paid to biomolecules as a chassis for engineered preventive, restorative, and regenerative approaches in dentistry. Indeed, biomolecules represent a uniquely versatile and precise tool to enable the design and development of bioinspired multifunctional dental materials to spur advancements in dentistry. In this review, we survey the range of biomolecules that have been used across dental biomaterials. Our particular focus is on the key biological activity imparted by each biomolecule toward prevention of dental and oral diseases as well as restoration of oral health. Additional emphasis is placed on the structure-function relationships between biomolecules and their biological activity, the unique challenges of each clinical condition, limitations of conventional therapies, and the advantages of each class of biomolecule for said challenge. Biomaterials for bone regeneration are not reviewed as numerous existing reviews on the topic have been recently published. We conclude our narrative review with an outlook on the future of biomolecules in dental biomaterials and potential avenues of innovation for biomaterial-based patient oral care.

Emerging Contact-Killing Antibacterial Strategies for Developing Anti-Biofilm Dental Polymeric Restorative Materials

Polymeric materials are the first choice for restoring tooth cavities, bonding tooth-colored fillings, sealing root canal systems, and many other dental restorative applications. However, polymeric materials are highly susceptible to bacterial attachment and colonization, leading to dental diseases. Many approaches have been investigated to minimize the formation of biofilms over polymeric restorative materials and at the tooth/material interfaces. Among them, contact-killing compounds have shown promising results to inhibit dental biofilms. Contact-killing compounds can be immobilized within the polymer structure, delivering a long-lasting effect with no leaching or release, thus providing advantages compared to release-based materials. This review discusses cutting-edge research on the development of contact-killing compounds in dental restorative materials to target oral pathogens. Contact-killing compounds in resin composite restorations, dental adhesives, root canal sealers, denture-based materials, and crown cements have all demonstrated promising antibacterial properties. Contact-killing restorative materials have been found to effectively inhibit the growth and activities of several oral pathogens related to dental caries, periodontal diseases, endodontic, and fungal infections. Further laboratory optimization and clinical trials using translational models are needed to confirm the clinical applicability of this new generation of contact-killing dental restorative materials.

Synergistic antibacterial and anti-biofilm activity of nisin like bacteriocin with curcumin and cinnamaldehyde against ESBL and MBL producing clinical strains

Bacteriocins are small peptides that can inhibit the growth of a diverse range of microbes. There is a need to identify bacteriocins that are effective against biofilms of resistant clinical strains. The present study focussed on the efficacy of purified nisin like bacteriocin-GAM217 against extended spectrum β-lactamase (ESBL) and metallo-beta-lactamase (MBL) producing clinical strains. Bacteriocin-GAM217 when combined with curcumin and cinnamaldehyde, synergistically enhanced antibacterial activity against planktonic and biofilm cultures of Staphylococcus epidermidis and Escherichia coli. Bacteriocin-GAM217 and phytochemical combinations inhibited biofilm formation by >80%, and disrupted the biofilm for selected ESBL and MBL producing clinical strains. The anti-adhesion assay showed that these combinatorial compounds significantly lowered the attachment of bacteria to Vero cells and that they elicited membrane permeability and rapid killing as viewed by confocal microscopy. This study demonstrates that bacteriocin-GAM217 in combination with phytochemicals can be a potential anti-biofilm agent and thus has potential for biomedical applications.