Role of Serratia marcescens ACE2 on diesel degradation and its influence on corrosion

Influence of bioaugmentation in crude oil contaminated soil by Pseudomonas species on the removal of total petroleum hydrocarbon

This study aimed to carry out the bioaugmentation of crude oil/motor oil contaminated soil. The mixture of novel strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4 were used in this bioaugmentation studies. The four different bioaugmentation systems (BS 1-4) were carried out in this experiment labelled as BS 1 (Crude oil contaminated soil), BS 2 (BS 1 + bacterial consortia), BS 3 (Motor oil sludge contaminated soil), and BS 4 (BS 3 + bacterial consortia). The total petroleum hydrocarbon (TPH) was investigated for monitor the effectiveness of bioaugmentation process. The highest TPH removal rate was recorded on BS 4 (9091 mg Kg ^-1) was about 67% followed by 52% on BS 2 (8584 mg Kg ^-1) respectively. The percentage of biodegradation efficiency (BE) of residual crude and motor oil contaminated soil were evaluated by GCMS analysis and the results showed that 65% (BS 2) and 83% (BS 4) respectively. Further the bioaugmented soil was subjected to the plant cultivation (Lablab purpureus) and the results revealed that the L. purpureus was rapidly grown in the systems BS 4 and BS 2 than the system BS 1 and BS 2 which was due to the lesser biodegradation of the crude oil contents. In resultant, it can be concluded that the soil was suitable for the cultivation of plant. Overall, this study revealed that the selected bacterial consortia were effectively degraded the hydrocarbon and act as a potential bioremediator in the hydrocarbon polluted soil in a short period.

Characterization of two novel strains of Pseudomonas aeruginosa on biodegradation of crude oil and its enzyme activities

Crude oil contaminant is one of the major problem to environment and its removal process considered as most challenging tool currently across the world. In this degradation study, crude oil hydrocarbons are degraded on various pH optimization conditions (pH 2, 4,6,7,8 and 10) by using two biosurfactant producing bacterial strains Pseudomonas aeruginosa PP3 and Pseudomonas aeruginosa PP4. During crude oil biodegradation, degradative enzymes alkane hydroxylase and alcohol dehydrogenase were examined and found to be higher in PP4 than PP3. Biodegradation efficiency (BE) of crude oil by both PP3 and PP4 were analysed by gas chromatography mass spectroscopy (GCMS). Based on strain PP3, the highest BE was observed in pH 2 and pH 4 were found to be 62% and 69% than pH 6, 7, 8 and 10 (47%, 47%, 49% and 45%). It reveals that PP3 was survived effectively in acidic condition and utilized the crude oil hydrocarbons. In contrast, the highest BE of PP4 was observed in pH 7 (78%) than pH4 (68%) and pH's 2, 6, 8 and 10 (52%, 52%, 43% and 53%) respectively. FTIR spectra results revealed that the presence of different functional group of hydrocarbons (OH, -CH₃, CO, C-H) in crude oil. GCMS results confirmed that both strains PP3 and PP4 were survived in acidic condition and utilized the crude oil hydrocarbons as sole carbon sources. This is the first observation on biodegradation of crude oil by the novel strains of Pseudomonas aeruginosa in acidic condition with higher BE. Overall, the extracellular enzymes and surface active compounds (biosurfactant) produced by bacterial strains were played a key role in crude oil biodegradation process.

Remediation of diesel-contaminated soil by alkoxyethanol aqueous two-phase system

The increasing diesel pollution accidents pose a serious threat to the ecological environment and human health. Remediation of diesel-contaminated soil (DCS) has attracted widespread attention during the past few decades. This work proposed an approach for the remediation of DCS by alkoxyethanol aqueous two-phase extraction (ATPE), which was an application of this small molecule aqueous two-phase system (ATPS). In addition, the influence of temperature, stirring speed, stirring time, and solid-liquid ratio on the removal of diesel was explored respectively. The removal efficiency of diesel could reach more than 97.18% in 18 min. Meanwhile, ATPS had high reusability, and the removal efficiency remained above 85.17% in the reuse process. Alkoxyethanol ATPE could effectively remove diesel hydrocarbons with different carbon chain lengths and the remediation process hardly caused residual organic solvents on the soil surface according to the analysis of gas chromatography-mass spectrometry (GC-MS) and Fourier transforms infrared (FT-IR), which could be regarded as the distinct advantage compared to the traditional surfactant washing method and organic solvent extraction method. The study of soil physicochemical properties and wheat germination proved that the soil structure and properties changed little after ATPE remediation. And finally, the mechanism of alkoxyethanol ATPE was intensively discussed according to the remediation characteristic. This work provided an efficient method for the remediation of DCS and widened the application fields of alkoxyethanol ATPS as well.

Enhanced biodegradation of hydrophobic organic pollutants by the bacterial consortium: Impact of enzymes and biosurfactants

Hydrocarbons and their derivative compounds are recalcitrant in nature and causing adverse impacts to the environment and are classified as important pollutants. Removal of these pollutants from the atmosphere is a challenging process. Hydrophobic organic pollutants (HOPs) including crude oil, diesel, dotriacontane (C₃₂), and tetracontane (C₄₀) are subjected to the biodegradation study by using a bacterial consortium consist of Bacillus subtilis, Pseudomonas stutzeri, and Acinetobacter baumannii. The impact of pH and temperature on the biodegradation process was monitored. During the HOPs biodegradation, the impact of hydrocarbon-degrading extracellular enzymes such as alcohol dehydrogenase, alkane hydroxylase, and lipase was examined, and found average activity about 47.2, 44.3, and 51.8 μmol/mg^-1, respectively. Additionally, other enzymes such as catechol 1,2 dioxygenase and catechol 2,3 dioxygenase were found as 118 and 112 μmol/mg^-1 Enzyme as an average range in all the HOPs degradation, respectively. Also, the impact of the extracellular polymeric substance and proteins were elucidated during the biodegradation of HOPs with the average range of 116.90, 54.98 mg/L^-1 respectively. The impact of biosurfactants on the degradation of different types of HOPs is elucidated. Very slight changes in the pH were also noticed during the biodegradation study. Biodegradation efficiency was calculated as 90, 84, 76, and 72% for crude oil, diesel, C_32, and C₄₀, respectively. Changes in the major functional groups (CH, C-O-C, CO, =CH₂, CH₂, CH₃) were confirmed by FTIR analysis and intermediated metabolites were identified by GCMS analysis. The surface-active molecules along with the enzymes played a crucial role in the biodegradation process.

Characterization of crude oil degrading bacterial communities and their impact on biofilm formation

In the present study, produced water sample collected from the Indian crude oil reservoir is used to enrich the bacterial communities. The impact of these enriched bacterial communities on the biodegradation of crude oil, biofilm formation, and biocorrosion process are elucidated. A crude oil degradation study is carried out with the minimal salt medium and 94% of crude oil was utilized by enriched bacterial communities. During the crude oil degradation many enzymes including alkane hydroxylase, alcohol dehydrogenase, and lipase are playing a key role in the biodegradation processes. The role of enriched bacterial biofilm on biocorrosion reactions are monitored by weight loss studies and electrochemical analysis. Weight loss study revealed that the biotic system has vigorous corrosion attacks compared to the abiotic system. Both AC-Impedance and Tafel analysis confirmed that the nature of the corrosion reaction take place in the biotic system. Very less charge transfer resistance and higher corrosion current are observed in the biotic system than in the abiotic system. Scanning electron microscope confirms that the dense biofilm formation favoured the pitting type of corrosion. X-ray diffraction analysis confirms that the metal oxides formed in the corrosion systems (biotic). From the metagenomic analysis of the V3-V4 region revealed that presence of diverse bacterial communities in the biofilm, and most of them are uncultured/unknown. Among the known genus, Bacillus, Halomonas, etc are dominant in the enriched bacterial biofilm sample. From this study, we conclude that the uncultured bacterial strains are found to be playing a key role in the pitting type of corrosion and they can utilize crude oil hydrocarbons, which make them succeeded in extreme oil reservoir environments.

Evaluation of Syzygium aromaticum aqueous extract as an eco-friendly inhibitor for microbiologically influenced corrosion of carbon steel in oil reservoir environment

In the present investigation, biocorrosion inhibition efficiency of Syzygium aromaticum (clove) aqueous extract on carbon steel in presence of four corrosion causing bacterial strains (Bacillus subtilis, Streptomyces parvus, Pseudomonas stutzeri, and Acinetobacter baumannii) was explored. Weight loss, potentiodynamic polarization, and AC impedance studies were carried out with and without bacterial strains and clove extract. The results obtained from weight loss and AC impedance studies indicate that these corrosion causing bacterial strains accelerated the biocorrosion reaction and biofilm playing a key role in this process. However, the addition of clove extract into the corrosive medium decreased the corrosion current and increased the solution and charge transfer resistance. The significant inhibition efficiency of about 87% was archived in the mixed consortia system with clove extract. The bioactive compounds were playing an important role in the antibacterial activity of the clove extract. It was revealed that clove extract has both biocidal and corrosion inhibition properties.

Biosurfactant mediated bioelectrokinetic remediation of diesel contaminated environment

The present study integrated the electrokinetic (EK) with bioremediation (Bioelectrokinetic -BEK) of diesel hydrocarbon by Staphylococcus epidermidis EVR4. It was identified as efficient biosurfactant producing bacteria and growth parameters was optimized using response surface methodology. Upon degradation, there is a complete disappearance of peaks from nonane (C₉) to tricosane (C₂₃) and 85%, 47% of degradation of pentacosane and octacosane respectively. Marine bacterial strain, EVR4 was found to be potential to degrade the diesel with a maximum degradation efficiency of 96% within 4 d, which was due to its synergistic role of biosurfactant and catabolic enzymes (dehydrogenase, catalase and cytochrome C). The application of integrated BEK was an effective insitu method for the remediation of diesel contaminated soil by BEK (84%) than EK (67%). EVR4 as an effective strain can be employed for BIO-EK method to clean the diesel hydrocarbon polluted environment.

Is Long-Term Heavy Metal Exposure Driving Carriage of Antibiotic Resistance in Environmental Opportunistic Pathogens: A Comprehensive Phenomic and Genomic Assessment Using Serratia sp. SRS-8-S-2018

The carriage of both, heavy metal and antibiotic resistance appears to be a common trait in bacterial communities native to long-term contaminated habitats, including the Savannah River Site (SRS). There is widespread soil contamination at the SRS; a United States Department of Energy (DOE) facility with long-term contamination from past industrial and nuclear weapons production activities. To further evaluate the genomic and metabolic traits that underpin metal and antibiotic resistance, a robust mercury (Hg) and uranium (U)-resistant strain- SRS-8-S-2018, was isolated. Minimum inhibitory concentration of this strain revealed resistance to Hg (10 μg/ml) and U (5 mM), the two main heavy metal contaminants at the SRS. Metabolic assessment of strain SRS-8-S-2018 using Biolog metabolic fingerprinting analysis revealed preference for carbohydrate utilization followed by polymers, amino acids, carboxy acids, and esters; this physiological activity diminished when Hg stress was provided at 1 and 3 μg/ml and completely ceased at 5 μg/ml Hg, indicating that continued release of Hg will have negative metabolic impacts to even those microorganisms that possess high resistance ability. Development of antibiotic resistance in strain SRS-8-S-2018 was evaluated at a functional level using phenomics, which confirmed broad resistance against 70.8% of the 48 antibiotics tested. Evolutionary and adaptive traits of strain SRS-8-S-2018 were further assessed using genomics, which revealed the strain to taxonomically affiliate with Serratia marcescens species, possessing a genome size of 5,323,630 bp, 5,261 proteins (CDS), 55 genes for transfer RNA (tRNA), and an average G + C content of 59.48. Comparative genomics with closest taxonomic relatives revealed 360 distinct genes in SRS-8-S-2018, with multiple functions related to both, antibiotic and heavy metal resistance, which likely facilitates the strain’s survival in a metalliferous soil habitat. Comparisons drawn between the environmentally isolated Serratia SRS-8-S-2018 with 31 other strains revealed a closer functional association with medically relevant isolates suggesting that propensity of environmental Serratia isolates in acquiring virulence traits, as a function of long-term exposure to heavy metals, which is facilitating development, recruitment and proliferation of not only metal resistant genes (MRGs) but antibiotic resistant genes (ARGs), which can potentially trigger future bacterial pathogen outbreaks emanating from contaminated environmental habitats.

High-throughput sequencing approach in analysis of microbial communities colonizing natural gas pipelines

This study provides a deep modern insight into the phylogenetic diversity among bacterial consortia found in working and nonworking high‐methane natural gas pipelines located in Poland. The working pipeline was characterized by lower biodiversity (140–154 bacterial genera from 22 to 23 classes, depending on the source of the debris) in comparison to the off‐gas pipeline (169 bacterial genera from 23 classes). The sediment recovered from the working pipeline contained mostly DNA identified as belonging to the phylum Firmicutes (66.4%–45.9% operational taxonomic units [OTUs]), predominantly Bacillus (41.4%–31.1% OTUs) followed by Lysinibacillus (2.6%–1.5% OTUs) and Clostridium (2.4%–1.8% OTUs). In the nonworking pipeline, Proteobacteria (46.8% OTUs) and Cyanobacteria (27.8% OTUs) were dominant. Over 30% of the Proteobacteria sequences showed homologies to Gammaproteobacteria, with Pseudomonas (7.1%), Enhydrobacter (2.1%), Stenotrophomonas (0.5%), and Haempohilus (0.4%) among the others. Differences were noted in terms of the chemical compositions of deposits originating from the working and nonworking gas pipelines. The deposits from the nonworking gas pipeline contained iron, as well as carbon (42.58%), sulphur (15.27%), and oxygen (15.32%). This composition can be linked to both the quantity and type of the resident microorganisms. The presence of a considerable amount of silicon (17.42%), and of aluminum, potassium, calcium, and magnesium at detectable levels, may likewise affect the metabolic activity of the resident consortia in the working gas pipeline. All the analyzed sediments included both bacteria known for causing and intensifying corrosion (e.g., Pseudomonas, Desulfovibrio, Shewanella, Serratia) and bacteria that can protect the surface of pipelines against deterioration (e.g., Bacillus). Biocorrosion is not related to a single mechanism or one species of microorganism, but results from the multidirectional activity of multiple microbial communities. The analysis presented here of the state of the microbiome in a gas pipeline during the real gas transport is a particularly valuable element of this work.

Molecular and Microbiological Insights on the Enrichment Procedures for the Isolation of Petroleum Degrading Bacteria and Fungi

Autochthonous bioaugmentation, by exploiting the indigenous microorganisms of the contaminated environment to be treated, can represent a successful bioremediation strategy. In this perspective, we have assessed by molecular methods the evolution of bacterial and fungal communities during the selective enrichment on different pollutants of a soil strongly polluted by mixtures of aliphatic and polycyclic hydrocarbons. Three consecutive enrichments were carried out on soil samples from different soil depths (0-1, 1-2, 2-3 m), and analyzed at each step by means of high-throughput sequencing of bacterial and fungal amplicons biomarkers. At the end of the enrichments, bacterial and fungal contaminants degrading strains were isolated and identified in order to (i) compare the composition of enriched communities by culture-dependent and culture-independent molecular methods and to (ii) obtain a collection of hydrocarbon degrading microorganisms potentially exploitable for soil bioremediation. Molecular results highlighted that for both bacteria and fungi the pollutant had a partial shaping effect on the enriched communities, with paraffin creating distinct enriched bacterial community from oil, and polycyclic aromatic hydrocarbons generally overlapping; interestingly neither the soil depth or the enrichment step had significant effects on the composition of the final enriched communities. Molecular analyses well-agreed with culture-dependent analyses in terms of most abundant microbial genera. A total of 95 bacterial and 94 fungal strains were isolated after selective enrichment procedure on different pollutants. On the whole, isolated bacteria where manly ascribed to Pseudomonas genus followed by Sphingobacterium, Bacillus, Stenothrophomonas, Achromobacter, and Serratia. As for fungi, Fusarium was the most abundant genus followed by Trichoderma and Aspergillus. The species comprising more isolates, such as Pseudomonas putida, Achromobacter xylosoxidans and Ochromobactrum anthropi for bacteria, Fusarium oxysporum and Fusarium solani for fungi, were also the dominant OTUs assessed in Illumina.

Diesel oil removal by Serratia sp. W4-01 immobilized in chitosan-activated carbon beads

Serratia sp. W4-01 was immobilized in chitosan-activated carbon beads and used for diesel oil removal. The type and concentration of chitosan, activated carbon content, and bead diameter were investigated as factors affecting diesel oil removal. The results showed that 2% (w/v) squid pen chitosan beads modified with 1% activated carbon (w/v) and with a 3-mm diameter had a good spherical shape and strength as well as diesel oil removal capability. The immobilized W4-01 cells removed more than 40% of diesel oil after 7 days when the initial diesel oil concentration was 100 to 400 mg L^-1, whereas 29-36% of diesel oil was removed after 14 days when the initial concentration was 800 to 1000 mg L^-1. Additionally, the immobilized cells maintained the ability to remove diesel oil over a pH range of 5-11. The addition of a biosurfactant increased the diesel oil removal from 62 to 75%. The reusability tests revealed that the ability of immobilized cells to remove diesel oil was enhanced after reuse, and 50-90% of diesel oil was removed during 2 to 12 reuse cycles. The stability and survival of W4-01 cells was confirmed by scanning electron microscopy and confocal laser scanning microscopy. The results of this study showed the potential use of W4-01 cells immobilized in chitosan-activated carbon beads for future applications in remediating diesel contamination.

Anaerobic biodegradation of biofuels and their impact on the corrosion of a Cu-Ni alloy in marine environments

Fuel biodegradation linked to sulfate reduction can lead to corrosion of the metallic infrastructure in a variety of marine environments. However, the biological stability of emerging biofuels and their potential impact on copper-nickel alloys commonly used in marine systems has not been well documented. Two potential naval biofuels (Camelina-JP5 and Fisher-Tropsch-F76) and their petroleum-derived counterparts (JP5 and F76) were critically assessed in seawater/sediment incubations containing a metal coupon (70/30 Cu-Ni alloy). Relative to a fuel-unamended control (1.2 ± 0.4 μM/d), Camelina-JP5 (86.4 ± 1.6 μM/d) and JP5 (77.6 ± 8.3 μM/d) stimulated much higher rates of sulfate reduction than either FT-F76 (11.4 ± 2.7 μM/d) or F76 (38.4 ± 3.7 μM/d). The general corrosion rate (r² = 0.91) and pitting corrosion (r² = 0.92) correlated with sulfate loss in these incubations. Despite differences in microbial community structure on the metal or in the aqueous or sediment phases, sulfate reducing bacteria affiliated with Desulfarculaceae and Desulfobacteraceae became predominant upon fuel amendment. The identification of alkylsuccinates and alkylbenzylsuccinates attested to anaerobic metabolism of fuel hydrocarbons. Sequences related to Desulfobulbaceae were highly enriched (34.2-64.8%) on the Cu-Ni metal surface, regardless of whether the incubation received a fuel amendment. These results demonstrate that the anaerobic metabolism of biofuel linked to sulfate reduction can exacerbate the corrosion of Cu-Ni alloys. Given the relative lability of Camelina-JP5, particular precaution should be taken when incorporating this hydroprocessed biofuel into marine environments serviced by a Cu-Ni metallic infrastructure.

High Manganese Tolerance and Biooxidation Ability of Serratia marcescens Isolated from Manganese Mine Water in Minas Gerais, Brazil

Manganese is an important metal for the maintenance of several biological functions, but it can be toxic in high concentrations. One of the main forms of human exposure to metals, such as manganese (Mn), is the consumption of solar salt contaminated. Mn-tolerant bacteria could be used to decrease the concentration of this metal from contaminated sites through safer environmental-friendly alternative technology in the future. Therefore, this study was undertaken to isolate and identify Mn resistant bacteria from water samples collected from a Mn mine in the Iron Quadrangle region (Minas Gerais, Brazil). Two bacterial isolates were identified as Serratia marcescens based on morphological, biochemical, 16S rDNA gene sequencing and phylogeny analysis. Maximum resistance of the selected isolates against increasing concentrations of Mn(II), up to 1200 mg L^-1 was determined in solid media. A batch assay was developed to analyze and quantify the Mn removal capacities of the isolates. Biological Mn removal capacities of over 55% were detected for both isolates. Whereas that mechanism like biosorption, precipitation and oxidation could be explaining the Mn removal, we seek to give an insight into some of the molecular mechanisms adopted by S. marcescens isolates. For this purpose, the following approaches were adopted: leucoberbelin blue I assay, Mn(II) oxidation by cell-free filtrate and electron microscopy and energy-dispersive X-ray spectroscopy analyses. Overall, these results indicate that S. marcescens promotes Mn removal in an indirect mechanism by the formation of Mn oxides precipitates around the cells, which should be further explored for potential biotechnological applications for water recycling both in hydrometallurgical and mineral processing operations.

Experimental, quantum chemical and molecular dynamic simulations studies on the corrosion inhibition of mild steel by some carbazole derivatives

Five selected carbazole derivatives, namely carbazole, 3,6-dibromocarbazole, 2-hydroxycarbazole, 1,2,3,4-tetrahydrocarbazole and 9-(2-ethylhexyl)carbazole-3,6-dicarboxaldehyde were investigated for their inhibitive effects on Desulfovibrio vulgaris (D. vulgaris) induced corrosion of mild steel and in 1 M HCl medium using weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The carbazole derivatives were found to be mixed type inhibitors with predominantly cathodic inhibitive effects for mild steel in 1 M HCl. Surface morphology results showed the compounds formed adsorbed film on mild steel surface in both aqueous acid and sulphate reducing bacteria (SRB) media. Quantum chemical calculations were used to provide molecular based explanations for the inhibitive effects of the compounds. The interactions of the molecules with mild steel surface was simulated based on molecular dynamic simulations approach using Fe(110) crystal surface as representative metallic surface.

Water-soluble Moringa oleifera lectin interferes with growth, survival and cell permeability of corrosive and pathogenic bacteria

AIMS

This work evaluated the antibacterial activity of a water-soluble Moringa oleifera seed lectin (WSMoL) by evaluating its effect on growth, survival and cell permeability of Bacillus sp., Bacillus cereus, Bacillus pumillus, Bacillus megaterium, Micrococcus sp., Pseudomonas sp., Pseudomonas fluorescens, Pseudomonas stutzeri and Serratia marcescens. In addition, the effect of lectin on membrane integrity of most sensitive species was also evaluated. All the tested bacteria are able to cause biocorrosion and some are also responsible for human infections.

METHODS AND RESULTS

WSMoL inhibited the bacterial growth, induced agglutination and promoted the leakage of proteins from cells of all strains. Bactericidal effect was detected against Bacillus sp., B. pumillus, B. megaterium, Ps. fluorescens and Ser. marcescens. The bacteriostatic effect of lectin was evident with only 6 h of incubation. Fluorescence microscopy of Ser. marcescens showed that WSMoL caused loss of cell integrity and indicated an anti-biofilm activity of the lectin.

CONCLUSIONS

WSMoL was active against the bacteria by inhibiting growth and affecting cell permeability. The lectin also interfered with membrane integrity of Ser. marcescens, the most sensitive species.

SIGNIFICANCE AND IMPACT OF THE STUDY

The study indicates that WSMoL was active against bacteria that cause serious problems in both industrial and health sectors. Also, the study contributes for the 'state-of-art' on antibacterial mechanisms of lectins.

Sunlight mediated diesel degradation under saline conditions using ionic silver coated sand via nanoreduction: use of impregnated form of thiourea modified chitosan membranes for ex situ application

The present research investigates the use of ionic silver coated sand dust (ISSD) for the sunlight mediated degradation of diesel under saline conditions. Sand dust was used as a template for reduction of silver ions by effective removal of chloride ions. Diesel degradation was estimated in terms of degradation (%), chloride removal, volume reduction and nanoparticle synthesis, respectively. The process was optimized using a 7-level Box-Behnken design. Among several factors, time (B), Tween 80 (C), ISSD dosage (D) and silver(I) concentration (F) were found to be most significant. Maximum diesel degradation 99.8% was obtained in a period of 14 h which was analyzed by gas chromatography. XPS analysis confirmed silver reduction as the underlying phenomena. TEM analysis and albeit first approximation method confirmed that enhanced degradation occurred due to physical contact between diesel components and ISSD. First order kinetic model exhibited the best fit. Light microscopy results showed the various stages in diesel degradation by a reduction in bubble size. Ex situ application was carried out using ISSD impregnated thiourea modified chitosan/PVA membranes by surface floatation technique for the remediation of diesel contaminated sea water. Complete diesel degradation was noted after 48 h of sunlight exposure.

Possible use of Serratia marcescens in toxic metal biosorption (removal)

BACKGROUND, AIM AND SCOPE

Metal pollution is a serious problem for environmental safety and programmes of monitoring and bioremediation are needed. Among the processes of bioremediation, the use of microbes to remove and degrade contaminants is considered a biotechnological approach to clean up polluted environments.

AIM

The aim of this study was to evaluate the ability of Serratia marcescens in Pb, Cd and Cr removal and the potential use of these bacteria in toxic metal bioremediation from polluted environments.

METHODS

A short-term study (120 min) was carried out to study the bacterial growth in the presence of sub-inhibitory concentrations of each metal analysed and the kinetics of metal biosorption in S. marcescens strain. In addition, metal influence on the biosynthesis of the red pigment 'prodigiosina' by S. marcescens was monitored.

RESULTS

The results obtained in this study show metals biosorption by S. marcescens (range: 0.0133-0.213 μg/g for Pb; 0.097-0.1853 μg/g for Cd; and 0.105-0.176 μg/g for Cr) and confirm the possible use of this bacterium to realize bioremediation processes, especially for Pb removal, and as a bioindicator of metal pollution.

Deciphering the traits associated with PAH degradation by a novel Serratia marcesencs L-11 strain

Polycyclic aromatic hydrocarbons (PAHs) are wide spread industrial pollutants that are released into the environment from burning of coal, distillation of wood, operation of gas works, oil refineries, vehicular emission, and combustion process. In this study a lipolytic bacterium was isolated from mixed stover compost of Saccharum munja and Brassica campestris. This strain was identified by both classical and 16S ribosomal DNA sequencing method and designated as Serratia marcesencs L-11. HPLC-based quantitation revealed 39- 100% degradation of PAH compounds within seven days. Further its ability to produce catechol 1, 2-dioxygenase (1.118 μM mL(-1) h(-1)) and biosurfactants (0.88 g L(-1)) during growth in PAH containing medium may be responsible for its PAH-degradation potential. This novel bacterium with an ability to produce lipases, biosurfactant and ring cleavage enzyme can prove to be useful for in-situ degradation of PAH compounds.

Molecular analysis of microbial diversity in corrosion samples from energy transmission towers

Microbial diversity in corrosion samples from energy transmission towers was investigated using molecular methods. Ribosomal DNA fragments were used to assemble gene libraries. Sequence analysis indicated 10 bacterial genera within the phyla Proteobacteria, Firmicutes, Actinobacteria and Bacteroidetes. In the two libraries generated from corroded screw-derived samples, the genus Acinetobacter was the most abundant. Acinetobacter and Clostridium spp. dominated, with similar percentages, in the libraries derived from corrosion scrapings. Fungal clones were affiliated with 14 genera belonging to the phyla Ascomycota and Basidiomycota; of these, Capnobotryella and Fellomyces were the most abundant fungi observed. Several of the microorganisms had not previously been associated with biofilms and corrosion, reinforcing the need to use molecular techniques to achieve a more comprehensive assessment of microbial diversity in environmental samples.