Vortex-Assisted Liquid–Liquid Microextraction (VALLME): The Latest Applications

Microextraction techniques for occupational biological monitoring: Basic principles, current applications and future perspectives

The application of green microextraction techniques (METs) is constantly being developed in different areas including pharmaceutical, forensic, food and environmental analysis. However, they are less used in biological monitoring of workers in occupational settings. Developing valid extraction methods and analytical techniques for the determination of occupational indicators plays a critical role in the management of workers' exposure to chemicals in workplaces. Microextraction techniques have become increasingly important because they are inexpensive, robust and environmentally friendly. This study aimed to provide a comprehensive review and interpret the applications of METs and novel sorbents and liquids in biological monitoring. Future perspectives and occupational indicators that METs have not yet been developed for are also discussed.

Deep eutectic solvents as a green alternative for trace element analysis in food and beverage samples: Recent advances and challenges

Metals and metalloids have different effects on human health even at trace levels. Some of them are essential for living organisms while others can be toxic. Therefore, the determination of trace elements in food and beverage is highly important to understand their impact in human health. A new generation of solvents named deep eutectic solvents (DES) has emerged as a green alternative for trace element analysis, owing to their low toxicity, biodegradability, and high extraction capacity. In recent years, the application of DES in extraction techniques for trace element analysis in food and beverage samples has increased significantly. This review summarizes recent advances and challenges on the application of DES to develop microextraction techniques useful for the analysis of samples with complex matrices. The importance of the use of biodegradable substances instead of classic organic solvents, which are toxic, volatile, and flammable in methods for elemental analysis with a positive environmental impact is also highlighted. Finally, conclusions and future challenges arising from the use of DES in microextraction techniques are discussed.

Assessment of endocrine disruptor pollutants and their metabolites in environmental water samples using a sustainable natural deep eutectic solvent-based analytical methodology

In this work, an evaluation of the occurrence of fifteen phthalates, four metabolites and one adipate in different groundwater, seawater and wastewater samples has been carried out due to their relevance on human health as they act as endocrine disruptors. For this purpose, a sustainable, fast and easy-handling vortex-assisted liquid-liquid microextraction method using a natural hydrophobic deep eutectic solvent based on menthol and carvacrol as extraction agent, combined with ultra-high performance liquid chromatography-mass spectrometry technique, has been developed and applied for the first time. An optimization was performed to evaluate four important factors affecting the extraction performance, and an analytical validation was carried out in terms of matrix effect, linearity, extraction efficiency, and sensitivity. Recovery values were obtained in the range 72-119% for all analytes (except for monoethyl phthalate: 61.1-72.3%) with relative standard deviation values lower than 17%. Limits of quantification were found between 0.91 and 8.09 μg L-1. As a result of the assessment of 31 different environmental water samples, monoethyl phthalate, diethyl phthalate, dibutyl phthalate and bis (2-ethylhexyl) phthalate were detected and quantified at different concentrations in the range 2.59-21.17 μg L-1 in 6 samples, and diallyl phthalate, butyl benzyl phthalate, dipentyl phthalate, dicyclohexyl phthalate, dihexyl phthalate and bis (2-ethylhexyl) adipate were detected in 20 more, showing the exposition of the population to these hazardous substances.

Vortex-assisted dispersive liquid-liquid microextraction-gas chromatography (VADLLME-GC) determination of residual ketamine, nimetazepam, and xylazine from drug-spiked beverages appearing in liquid, droplet, and dry forms

Presently, investigations of drug-facilitated crimes (DFCs) rely on the detection of substances extracted from biological samples following intake by the victim. However, such detection requires rapid sampling and analysis prior to metabolism and elimination of the drugs from the body. In cases of suspected DFCs, drug-spiked beverage samples, whether in liquid, droplet, or even dried form, can be tested for the presence of spike drugs and used as evidence for the occurrence of DFCs. This study aimed to quantitatively determine three sedative-hypnotics (ketamine, nimetazepam, and xylazine) from drug-spiked beverages using a vortex-assisted dispersive liquid-liquid microextraction-gas chromatography (VADLLME-GC) approach. In this study, a GC method was first developed and validated, followed by the optimization of the VADLLME protocol, which was then applied to quantify the target substances in simulated forensic case scenarios. The developed GC method was selective, sensitive (limit of detection: 0.08 μg/ml [ketamine]; 0.16 μg/ml [nimetazepam]; 0.08 μg/ml [xylazine]), linear (R²  > 0.99), precise (%RSD <7.2%), and accurate (% recovery: 92.8%-103.5%). Higher recoveries were achieved for the three drugs from beverage samples in liquid form (51%-97%) as compared to droplet (48%-96%) and dried (44%-93%) residues. The recovery was not hindered by very low volumes of spiked beverage and dried residues. In conclusion, the developed VADLLME-GC method successfully recovered ketamine, nimetazepam, and xylazine from spiked beverages that are likely to be encountered during forensic investigation of DFCs.

Recent advances in analysis of bisphenols and their derivatives in biological matrices

Biomonitoring is a very useful tool to evaluate human exposure to endocrine-disrupting compounds (EDCs), like bisphenols (BPs), which are widely used in the manufacture of plastics. The development of reliable analytical methods is key in the field of public health surveillance to obtain biomonitoring data to determine what BPs are reaching people's bodies. This review discusses recent methods for the quantitative measurement of bisphenols and their derivatives in biological samples like urine, blood, breast milk, saliva, and hair, among others. We also discuss the different procedures commonly used for sample treatment, which includes extraction and clean-up, and instrumental techniques currently used to determine these compounds. Sample preparation techniques continue to play an important role in the analysis of complex matrices, for liquid matrices the most commonly employed is solid-phase extraction, although microextraction techniques are gaining importance in this field, and for solid samples ultrasound-assisted extraction. The main instrumental techniques used are liquid and gas chromatography coupled with mass spectrometry. Finally, we present data on the main parameters obtained in the validation of the revised methods. This review focuses on various methods developed and applied for trace analysis of bisphenols, their conjugates, halogenated derivatives, and diglycidyl ethers in biological samples to enable the required selectivity and sensitivity. For this purpose, a review is carried out of the most recent relevant publications from 2016 up to present.

Molecularly Imprinted Polymers for Dispersive (Micro)Solid Phase Extraction: A Review

The review describes the development of batch solid phase extraction procedures based on dispersive (micro)solid phase extraction with molecularly imprinted polymers (MIPs) and magnetic MIPs (MMIPs). Advantages and disadvantages of the various MIPs for dispersive solid phase extraction and dispersive (micro)solid phase extraction are discussed. In addition, an effort has also been made to condense the information regarding MMIPs since there are a great variety of supports (magnetite and magnetite composites with carbon nanotubes, graphene oxide, or organic metal framework) and magnetite surface functionalization mechanisms for enhancing MIP synthesis, including reversible addition-fragmentation chain-transfer (RAFT) polymerization. Finally, drawbacks and future prospects for improving molecularly imprinted (micro)solid phase extraction (MIMSPE) are also appraised.

Surface nanodroplet-based nanoextraction from sub-milliliter volumes of dense suspensions

A greener analytical technique for quantifying compounds in dense suspensions is needed for wastewater and environmental analysis, chemical or bio-conversion process monitoring, biomedical diagnostics, and food quality control, among others. In this work, we introduce a green, fast, one-step method called nanoextraction for extraction and detection of target analytes from sub-milliliter dense suspensions using surface nanodroplets without toxic solvents and pre-removal of the solid contents. With nanoextraction, we achieve a limit of detection (LOD) of 10-9 M for a fluorescent model analyte obtained from a particle suspension sample. The LOD is lower than that in water without particles (10-8 M), potentially due to the interaction of particles and the analyte. The high particle concentration in the suspension sample, thus, does not reduce the extraction efficiency, although the extraction process was slowed down up to 5 min. As a proof of principle, we demonstrate the nanoextraction for the quantification of model compounds in wastewater slurry containing 30 wt% solids and oily components (i.e. heavy oils). The nanoextraction and detection technology developed in this work may be used in fast analytical technologies for complex slurry samples in the environment, industrial waste, or in biomedical diagnostics.

Molecularly Imprinted Polymer for a Smart Dispersive Micro-Solid Phase Extraction Technique for Assessing Trace Level Aflatoxins in Cultured Fish

Molecularly imprinted technology (MIT) consists of preparing materials exhibiting specific recognition cavities to selective mimic the target analytes. The prepared materials promote selective interactions with the targets and avoid interactions of concomitants from complex food, biological, clinical, and environmental matrices. This chapter provides information on a recent development of a vortex-assisted micro-solid phase extraction using a molecularly imprinted polymer (MIP) as an adsorbent for aflatoxins (AFs) determination in cultured fish. MIP particles were synthesized by precipitation polymerization using 5,7-dimethoxycoumarin as a dummy template, methacrylic acid as a functional monomer, divinylbenzene as a cross-linker, and 2,2-azobisisobutyronitrile as an initiator. Polymerization following the precipitation method guarantees homogeneous particle size distribution and the integrity of the imprinted cavities. The MIP microparticles were found to have 5 μm in diameter and a spherical shape. Important parameters such as sample extract pH, adsorption stirring speed and time, desorption stirring speed and time, elution solvent composition and volume, and polymer mass, were fully optimized. The pre-concentration method allows therefore the assessment of four major AFs (B1, B2, G1, and G2) present in cultured fish at very low levels, with pre-concentration factors from 15 to 50 depending of the volume of extract used for performing the dispersive micro-solid phase extraction (D-μ-SPE).

Effervescence-Assisted Microextraction-One Decade of Developments

Dispersive microextraction techniques are key in the analytical sample treatment context as they combine a favored thermodynamics and kinetics isolation of the target analytes from the sample matrix. The dispersion of the extractant in the form of tiny particles or drops, depending on the technique, into the sample enlarges the contact surface area between phases, thus enhancing the mass transference. This dispersion can be achieved by applying external energy sources, the use of chemicals, or the combination of both strategies. Effervescence-assisted microextraction emerged in 2011 as a new alternative in this context. The technique uses in situ-generated carbon dioxide as the disperser, and it has been successfully applied in the solid-phase and liquid-phase microextraction fields. This minireview explains the main fundamentals of the technique, its potential and the main developments reported.

Miniaturized vortex assisted-dispersive molecularly imprinted polymer micro-solid phase extraction and HPLC-MS/MS for assessing trace aflatoxins in cultured fish

A dispersive micro-solid phase extraction approach using a molecularly imprinted polymer as an adsorbent has been developed for pre-concentrating aflatoxins from cultured fish. Aflatoxins were first isolated from fish muscle and liver by an ultrasound assisted extraction procedure using a 60 : 40 acetonitrile/0.1 M KH2PO4 aqueous buffer (pH 6.0) mixture. Polymeric adsorbent beads were synthesized using 5,7-dimethoxycoumarin as a dummy template, methacrylic acid as a functional monomer, divinylbenzene as a crosslinker, and 2,2'-azobisisobutyronitrile as an initiator. Parameters affecting the steps of extraction procedure, including the sample (fish extract) pH, adsorption stirring speed and time, desorption stirring speed and time, elution solvent ratio, and polymer capacity, were investigated and optimized. The limit of detection was found to vary from 0.29 to 0.61 μg kg-1 for the several aflatoxins. The proposed method was shown to be accurate and precise. Intraday and inter-day relative standard deviations were lower than 20%, and intraday and inter-day analytical recoveries were within the 80-100% range. The prepared adsorbent in the dispersive micro-solid phase extraction format was re-usable, and the pre-concentration procedure was found to be simple, rapid and highly selective and sensitive to identify/quantify AFs in fish.