Enzyme-Linked Immunosorbent Assay of Ampicillin in Milk

Click and Detect: Versatile Ampicillin Aptasensor Enabled by Click Chemistry on a Graphene-Alkyne Derivative

Tackling the current problem of antimicrobial resistance (AMR) requires fast, inexpensive, and effective methods for controlling and detecting antibiotics in diverse samples at the point of interest. Cost-effective, disposable, point-of-care electrochemical biosensors are a particularly attractive option. However, there is a need for conductive and versatile carbon-based materials and inks that enable effective bioconjugation under mild conditions for the development of robust, sensitive, and selective devices. This work describes a simple and fast methodology to construct an aptasensor based on a novel graphene derivative equipped with alkyne groups prepared via fluorographene chemistry. Using click chemistry, an aptamer is immobilized and used as a successful platform for the selective determination of ampicillin in real samples in the presence of interfering molecules. The electrochemical aptasensor displayed a detection limit of 1.36 nM, high selectivity among other antibiotics, the storage stability of 4 weeks, and is effective in real samples. Additionally, structural and docking simulations of the aptamer shed light on the ampicillin binding mechanism. The versatility of this platform opens up wide possibilities for constructing a new class of aptasensor based on disposable screen-printed carbon electrodes usable in point-of-care devices.

[Determination of three penicillin residues in milk by solid-phase extraction-ultra performance liquid chromatography-tandem mass spectrometry using a covalent triazine framework sorbent]

A method based on solid-phase extraction-ultra performance liquid chromatography-tandem mass spectrometry (SPE-UPLC-MS/MS) was established for the determination of gpenicillin, cloxacillin, ampicillin residues in milk. Using self-made covalent triazine frameworks (CTFs) as the solid-phase extraction sorbents, the main factors influencing the efficiency of the solid-phase extraction columns, such as the sorbent amount, eluent type, eluent volume, and flow rate, were optimized. The extraction and purification conditions for the samples were also investigated. The optimal extraction effect was achieved at a flow rate of 3 mL/min with 60 mg CTFs and 6 mL eluent solution (acetonitrile). Separation was carried out on a Waters ACQUITY UPLC BEH C18 column, and 0.1% formic acid aqueous solution-acetonitrile was used as the mobile phases for gradient elution. The filtrate was detected by ultra performance liquid chromatography-tandem mass spectrometry, identified by electrospray ionization (ESI) in the positive mode using multiple reaction monitoring, and quantified using external standards. The calibration curves of the three penicillins showed good linearity and the correlation coefficients of the linear regression equations for the three target analytes were all greater than 0.999. The limits of detection (LODs) and limits of quantification (LOQs) were 0.05-0.10 μg/kg and 0.1-0.4 μg/kg, respectively. The average recoveries of the three analytes were 84.9%-94.1%, and the relative standard deviations (RSDs, n=5) were 1.66%-3.27%. Moreover, the mechanism of interaction between the CTFs and the target analytes was analyzed. The results revealed the existence of π-π and hydrogen-bond interactions between the CTFs and analytes. The results further indicated that the CTFs could be successfully used for the enrichment and purification of penicillins in milk. The proposed method has the advantages of high precision, good reproducibility, high resolution, and short analysis time, and it is suitable for the qualitative and quantitative determination of trace targets in complex matrices.

Conjugates of Aminopenicillins with Proteins: Synthesis, Immunogenic Properties, and Binding to the β-Lactam Receptor and Antibodies

Abstract

A new approach to aminopenicillin modification and conjugation with proteins was developed using di-N-hydroxysuccinimide esters of dicarboxylic acids as crosslinkers. Acylation of ampicillin (Amp) and amoxicillin (Amox) with di-N-hydroxysuccinimide esters of adipic or terephthalic acids was carried out in an organic solvent. Subsequent conjugation of the resulting aminopenicillin derivatives with proteins was done in an aqueous medium at pH 8.3 to produce immunogenic and enzymatic conjugates of Amp and Amox. The β-lactam cycle of Amp was shown to remain intact after chemical modification and synthesis of linker conjugates. An immunogenic Amp–thyroglobulin conjugate containing an aromatic linker was used for long-term immunization of rabbits, and polyclonal antibodies thus obtained were found to bind Amp, Amox, and penicillin G with extremely high sensitivity. Amp and Amox conjugates with horseradish peroxidase (HRP) were synthesized and characterized in a competitive protein-binding (receptor) assay and a direct competitive enzyme-linked immunosorbent assay (ELISA). Of the model immunoassay systems tested, the best characteristics were observed for heterologous direct ELISA with polyclonal antibodies and the Amp–HRP conjugate that contained an adipic acid fragment as a linker: the Amp sensitivity was 0.03 ng/mL and IC50 = 0.20 ng/mL.

Flexible freestanding graphene paper-based potentiometric enzymatic aptasensor for ultrasensitive wireless detection of kanamycin

Flexible sensing devices have drawn tremendous attention in the past decades due to their potential applications in future hand-held, potable consumer, and wearable electronics. Here, we firstly developed an ultrasensitive wireless potentiometric aptasensor based on flexible freestanding graphene paper for kanamycin detection. Flexible graphene paper made from a simple vacuum filtration method was used as a biocompatible platform for effective immobilization of aptamer. A nuclease-assisted amplification strategy was introduced into this potentiometric biosensing system in order to significantly improve the detection sensitivity through a classic catalytic recycling reaction of target induced by the nuclease (DNase I). As expected, an ultra-low detection limit of 30.0 fg/mL for kanamycin was achieved. Furthermore, the developed potentiometric enzymatic aptasensor exhibits high selectivity, favorable flexibility, excellent stability and reproducibility, which holds great promising for its routine sensing application.

A reagentless and reusable electrochemical aptamer-based sensor for rapid detection of ampicillin in complex samples

We report the design and fabrication of a "signal-on" electrochemical aptamer-based (E-AB) sensor for detection of ampicillin. The signaling of the sensor is based on target binding-induced changes in the conformation and flexibility of the methylene blue-modified aptamer probe. The sensor's response is fast; signal saturation can be reached in ~ 200s. Since all the sensor components are surface-immobilized, it is regenerable and can be reused for at least three times. It has demonstrated good specificity and is capable of differentiating between ampicillin and structurally similar antibiotics such as amoxicillin. More importantly, it is selective enough to be employed directly in complex samples, including serum, saliva, and milk. Although both alternating current voltammetry (ACV) and square wave voltammetry (SWV) are suitable sensor characterization techniques, our results show that ACV is better suited for target analysis. Even under the optimal experimental conditions, the limit of detection of the sensor obtained in ACV (1µM) is significantly lower than that obtained in SWV (30µM).

Highly sensitive aptasensor based on synergetic catalysis activity of MoS2-Au-HE composite using cDNA-Au-GOD for signal amplification

Single or few-layer nanosheets of MoS₂ (MoS₂ nanosheets) and a composite composed of MoS₂ nanosheets, Au nanoparticles (AuNPs) and hemin (HE) (denoted as MoS₂-Au-HE) were prepared. The composites possessed high synergetic catalysis activity towards the electroreduction of hydrogen peroxide. Furthermore, glucose oxidase (GOD) and AuNPs were used as marker of the complementary DNA (cDNA) strand of kanamycin aptamer to prepare a conjugate (reffered as cDNA-Au-GOD) that was designed as the signal probe. Both cDNA-Au-GOD and MoS₂-Au-HE were applied to fabricate aptasensor for kanamycin. MoS₂-Au-HE acted as solid platform for kanamycin aptamer and signal transmitters. AuNPs were employed as the supporter of cDNA and GOD which catalyze dissolved oxygen to produce hydrogen peroxide in the presence of glucose. Then cathodic peak current of H₂O₂ was recorded by differential pulse voltammetry (DPV). The electrochemical reduction of H₂O₂ was catalyzed by MoS₂-Au-HE that was modified onto the surface of a glassy carbon electrode (GCE). The cathodic peak current of H₂O₂ was highly linearly decreased with an increase of kanamycin concentrations from 1.0ng/L to 1.0×10⁵ng/L, with a detection limit of 0.8ng/L. This aptasensor can be used to detect kanamycin in milk with high specificity, sensitivity and selectivity.

Production of anti-amoxicillin ScFv antibody and simulation studying its molecular recognition mechanism for penicillins

The molecular recognition mechanism of an antibody for its hapten is very interesting. The objective of this research was to study the intermolecular interactions of an anti-amoxicillin antibody with penicillin drugs. The single chain variable fragment (ScFv) antibody was generated from a hybridoma cell strain excreting the monoclonal antibody for amoxicillin. The recombinant ScFv antibody showed similar recognition ability for penicillins to its parental monoclonal antibody: simultaneous recognizing 11 penicillins with cross-reactivities of 18-107%. The three-dimensional structure of the ScFv antibody was simulated by using homology modeling, and its intermolecular interactions with 11 penicillins were studied by using molecular docking. Results showed that three CDRs are involved in antibody recognition; CDR L3 Arg 100, CDR H3 Tyr226, and CDR H3 Arg 228 were the key contact amino acid residues; hydrogen bonding was the main antibody-drug intermolecular force; and the core structure of penicillin drugs was the main antibody binding position. These results could explain the recognition mechanism of anti-amoxicillin antibody for amoxicillin and its analogs. This is the first study reporting the production of ScFv antibody for penicillins and stimulation studying its recognition mechanism.

Conjugation of ampicillin and enrofloxacin residues with bovine serum albumin and raising of polyclonal antibodies against them

AIM

The aim of this study is to test the potency of bovine serum albumin (BSA) conjugated ampicillin (AMP) and enrofloxacin (ENR) antigens in eliciting an immune response in rats using indirect competitive enzyme-linked immunosorbent assay (icELISA).

MATERIALS AND METHODS

AMP and ENR antibiotics were conjugated with BSA by carbodiimide reaction using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) as a cross-linker. The successful conjugation was confirmed by sodium dodecyl sulfate polyacrylamide gel electrophoresis. Sprague-Dawley rats were immunized with the conjugates and blood samples were collected serially at 15 days time interval after first immunization plus first booster, second booster, third booster, and the fourth sampling was done 1½ month after the third booster. The antibody titres in the antisera of each antibiotic in all the four immunization cycles (ICs) were determined by an icELISA at various serum dilutions ranging from 1/100 to 1/6400.

RESULTS

Analysis of antibiotic-BSA conjugates by sodium dodecyl sulfate polyacrylamide gel electrophoresis and coomassie blue staining revealed high molecular weight bands of 85 kDa and 74 kDa for AMP-BSA and ENR-BSA respectively when compared to 68 kDa band of BSA. Both the antibiotic conjugates elicited a good immune response in rats but comparatively the response was more with AMP-BSA conjugate than ENR-BSA conjugate. Maximum optical density 450 value of 2.577 was recorded for AMP-BSA antisera, and 1.723 was recorded for ENR-BSA antisera at 1/100(th) antiserum dilution in third IC.

CONCLUSION

AMP and ENR antibiotics proved to be good immunogens when conjugated to BSA by carbodiimide reaction with EDC as crosslinker. The polyclonal antibodies produced can be employed for detecting AMP and ENR residues in milk and urine samples.

Piezoelectric immunosensors for the detection of individual antibiotics and the total content of penicillin antibiotics in foodstuffs

Piezoelectric immunosensors on the basis of homologous and group-specificantibodies have been developed for detecting penicillin G, ampicillin, and the total content of penicillin antibiotics. The receptor coating of the sensor was obtained by the immobilization of penicillin G or ampicillin hapten-protein conjugates on the polypyrrole film obtained by electropolymerization and activated by glutaraldehyde. The affinity constants and the cross reactivity coefficients have been calculated. This made it possible to estimate the affinity and specificity of the polyclonal and monoclonal antibodies used. The calibration curves are linear in the range of concentrations 2.5-250.0 ng ml(-1) (penicillin G), 2.5-500.0 ng ml(-1) (ampicillin), and 1-500 ng ml(-1) (group of penicillin). The limits of detection are 0.8 ng ml(-1), 3.9 ng ml(-1), which are lower than MRL, established for penicillin antibiotics. The sensors were tested in detecting penicillins in milk, pork, beef, liver.

Synthesis of novel hapten and production of generic monoclonal antibody for immunoassay of penicillins residues in milk

The objective of this study was to produce a generic monoclonal antibody for determination of penicillins residues in milk. The compound 6-aminopenicillanic acid was used as the template to synthesize two novel generic haptens that were used to produce the monoclonal antibodies. The obtained monoclonal antibodies simultaneously recognized 11 penicillin drugs (amoxicillin, ampicillin, penicillin G, penicillin V, sulbenicillin, carbencillin, methicillin, cloxacillin, dicloxacillin, oxacillin, and nafcillin). After evaluation of different reagent combinations, a heterologous indirect competitive enzyme immunoassay was developed to multi-determine the 11 drugs in milk. The crossreactivities to the 11 drugs were in a range of 16%-117% and the limits of detection were in a range of 0.7-9.3 ng/mL depending on the drug. The recoveries from the fortified blank milk were in a range of 77.6%-99.4% with coefficients of variation lower than 13.5%. This method could be used as a rapid screen tool for routine monitoring the residues of the 11 penicillin drugs in animal derived foods.