Use of X-ray Tomography to Map Crystalline and Amorphous Phases in Frozen Biomaterials

Biostasis: A Roadmap for Research in Preservation and Potential Revival of Humans

Human biostasis, the preservation of a human when all other contemporary options for extension of quality life are exhausted, offers the speculative potential for survival via continuation of life in the future. While provably reversible preservation, also known as suspended animation, is not yet possible for humans, the primary justification for contemporary biostasis is the preservation of the brain, which is broadly considered the seat of memories, personality, and identity. By preserving the information contained within the brain's structures, it may be possible to resuscitate a healthy whole individual using advanced future technologies. There are numerous challenges in biostasis, including inadequacies in current preservation techniques, methods to evaluate the quality of preservation, and potential future revival technologies. In this report, we describe a roadmap that attempts to delineate research directions that could improve the field of biostasis, focusing on optimizing preservation protocols and establishing metrics for querying preservation quality, as well as pre- and post-cardiac arrest factors, stabilization strategies, and methods for long-term preservation. We acknowledge the highly theoretical nature of future revival technologies and the importance of achieving high-fidelity brain preservation to maximize the potential of future repair technologies. We plan to update the research roadmap biennially. Our goal is to encourage multidisciplinary communication and collaboration in this field.

Experimental observation of cavity-free ice-free isochoric vitrification via combined pressure measurements and photon counting x-ray computed tomography

Isochoric (constant-volume or volumetrically confined) vitrification has shown potential as an alternative cryopreservation-by-vitrification technique, but the complex processes at play within the chamber are yet poorly characterized, and recent investigations have prompted significant debate around whether a truly isochoric vitrification process (in which the liquid remains completely confined by solid boundaries) is indeed feasible. Based on a recent thermomechanical simulation of a high-concentration Me2SO solution, Solanki and Rabin (Cryobiology, 2023, 111, 9-15.) argue that isochoric vitrification is not feasible, because differential thermal contraction of the solution and container will necessarily drive generation of a cavity, corrupting the rigid confinement of the liquid. Here, we provide direct experimental evidence to the contrary, demonstrating cavity-free isochoric vitrification of a ∼3.5 M vitrification solution by combined isochoric pressure measurement (IPM) and photon-counting x-ray computed tomography (PC-CT). We hypothesize that the absence of a cavity is due to the minimal thermal contraction of the solution, which we support with additional volumetric analysis of the PC-CT reconstructions. In total, this study provides experimental evidence both demonstrating the feasibility of isochoric vitrification and highlighting the potential of designing vitrification solutions that exhibit minimal thermal contraction.

Vitrification and nanowarming enable long-term organ cryopreservation and life-sustaining kidney transplantation in a rat model

Banking cryopreserved organs could transform transplantation into a planned procedure that more equitably reaches patients regardless of geographical and time constraints. Previous organ cryopreservation attempts have failed primarily due to ice formation, but a promising alternative is vitrification, or the rapid cooling of organs to a stable, ice-free, glass-like state. However, rewarming of vitrified organs can similarly fail due to ice crystallization if rewarming is too slow or cracking from thermal stress if rewarming is not uniform. Here we use "nanowarming," which employs alternating magnetic fields to heat nanoparticles within the organ vasculature, to achieve both rapid and uniform warming, after which the nanoparticles are removed by perfusion. We show that vitrified kidneys can be cryogenically stored (up to 100 days) and successfully recovered by nanowarming to allow transplantation and restore life-sustaining full renal function in nephrectomized recipients in a male rat model. Scaling this technology may one day enable organ banking for improved transplantation.

Toward in-process technology-aided automation for enhanced microbial food safety and quality assurance in milk and beverages processing

Ensuring the safety of food products is critical to food production and processing. In food processing and production, several standard guidelines are implemented to achieve acceptable food quality and safety. This notwithstanding, due to human limitations, processed foods are often contaminated either with microorganisms, microbial byproducts, or chemical agents, resulting in the compromise of product quality with far-reaching consequences including foodborne diseases, food intoxication, and food recall. Transitioning from manual food processing to automation-aided food processing (smart food processing) which is guided by artificial intelligence will guarantee the safety and quality of food. However, this will require huge investments in terms of resources, technologies, and expertise. This study reviews the potential of artificial intelligence in food processing. In addition, it presents the technologies and methods with potential applications in implementing automated technology-aided processing. A conceptual design for an automated food processing line comprised of various operational layers and processes targeted at enhancing the microbial safety and quality assurance of liquid foods such as milk and beverages is elaborated.

Vitrification and Rewarming of Magnetic Nanoparticle-Loaded Rat Hearts

To extend the preservation of donor hearts beyond the current 4-6 h, this paper explores heart cryopreservation by vitrification-cryogenic storage in a glass-like state. While organ vitrification is made possible by using cryoprotective agents (CPA) that inhibit ice during cooling, failure occurs during convective rewarming due to slow and non-uniform rewarming which causes ice crystallization and/or cracking. Here an alternative, "nanowarming", which uses silica-coated iron oxide nanoparticles (sIONPs) perfusion loaded through the vasculature is explored, that allows a radiofrequency coil to rewarm the organ quickly and uniformly to avoid convective failures. Nanowarming has been applied to cells and tissues, and a proof of principle study suggests it is possible in the heart, but proper physical and biological characterization especially in organs is still lacking. Here, using a rat heart model, controlled machine perfusion loading and unloading of CPA and sIONPs, cooling to a vitrified state, and fast and uniform nanowarming without crystallization or cracking is demonstrated. Further, nanowarmed hearts maintain histologic appearance and endothelial integrity superior to convective rewarming and indistinguishable from CPA load/unload control hearts while showing some promising organ-level (electrical) functional activity. This work demonstrates physically successful heart vitrification and nanowarming and that biological outcomes can be expected to improve by reducing or eliminating CPA toxicity during loading and unloading.

Vitrification and Nanowarming of Kidneys

Vitrification can dramatically increase the storage of viable biomaterials in the cryogenic state for years. Unfortunately, vitrified systems ≥3 mL like large tissues and organs, cannot currently be rewarmed sufficiently rapidly or uniformly by convective approaches to avoid ice crystallization or cracking failures. A new volumetric rewarming technology entitled "nanowarming" addresses this problem by using radiofrequency excited iron oxide nanoparticles to rewarm vitrified systems rapidly and uniformly. Here, for the first time, successful recovery of a rat kidney from the vitrified state using nanowarming, is shown. First, kidneys are perfused via the renal artery with a cryoprotective cocktail (CPA) and silica-coated iron oxide nanoparticles (sIONPs). After cooling at -40 °C min-1 in a controlled rate freezer, microcomputed tomography (µCT) imaging is used to verify the distribution of the sIONPs and the vitrified state of the kidneys. By applying a radiofrequency field to excite the distributed sIONPs, the vitrified kidneys are nanowarmed at a mean rate of 63.7 °C min-1 . Experiments and modeling show the avoidance of both ice crystallization and cracking during these processes. Histology and confocal imaging show that nanowarmed kidneys are dramatically better than convective rewarming controls. This work suggests that kidney nanowarming holds tremendous promise for transplantation.

Principles Underlying Cryopreservation and Freeze-Drying of Cells and Tissues

Cryopreservation and freeze-drying can be used to preserve cells or tissues for prolonged periods. Vitrification, or ice-free cryopreservation, is an alternative to cryopreservation that enables cooling cells to cryogenic temperatures in the absence of ice. The processing pathways involved in (ice-free) cryopreservation and freeze-drying of cells and tissues, however, can be very damaging. In this chapter, we describe the principles underlying preservation of cells for which freezing and drying are normally lethal processes as well as for cells that are able to survive in a reversible state of suspended animation. Freezing results in solution effects injury and/or intracellular ice formation, whereas drying results in removal of (non-freezable) water normally bound to biomolecules, which is generally more damaging. Cryopreservation and freeze-drying require different types of protective agents. Different mechanistic modes of action of cryoprotective and lyoprotective agents are described including minimizing ice formation, preferential exclusion, water replacement, and vitrification. Furthermore, it is discussed how protective agents can be introduced into cells avoiding damage due to too large cell volume excursions, and how knowledge of cell-specific membrane permeability properties in various temperature regimes can be used to rationally design (ice-free) cryopreservation and freeze-drying protocols.

Transport processes in equine oocytes and ovarian tissue during loading with cryoprotective solutions

BACKGROUND

Rational design of cryopreservation strategies for oocytes and ovarian cortex tissue requires insights in the rate at which cryoprotective agents (CPA) permeate and concomitant water transport takes place. The aim of the current study was to investigate possible differences in permeation kinetics of different CPAs (i.e., glycerol/GLY, ethylene glycol/EG, dimethyl sulfoxide/DMSO, and propylene glycol/PG), in equine oocytes as well as ovarian tissue.

METHODS

Membrane permeability of oocytes to water (Lp) and to CPAs (Ps) was inferred from video microscopic imaging of oocyte volume responses during perfusion with anisotonic and CPA solutions. CPA diffusion into ovarian tissue and tissue dehydration was monitored during incubation, using osmometer and weight measurements, to derive CPA diffusion coefficients (D).

RESULTS

Membrane permeability of oocytes towards CPAs was found to increase in the order GLY < EG < DMSO<PG. Permeability towards water in anisotonic solutions was determined to be higher than in CPA solutions, indicating CPAs alter membrane permeability properties. CPA diffusion in ovarian tissue increased in the order GLY,PG < EG,DMSO. Tissue dehydration was found to increase with exposure to increasing CPA concentrations, which inversely correlated with CPA diffusivity.

CONCLUSIONS

In conclusion, it is shown here that the rate of CPA movement across membrane bilayers is determined by different physical barrier factors than those determining CPA movement in tissues.

GENERAL SIGNIFICANCE

The parameters presented in this study can be applied in models describing solute and water transport in cells and tissues, as well as in cryopreservation protocols.

Diffusion Limited Cryopreservation of Tissue with Radiofrequency Heated Metal Forms

Cryopreserved tissues are increasingly needed in biomedical applications. However, successful cryopreservation is generally only reported for thin tissues (≤1 mm). This work presents several innovations to reduce cryoprotectant (CPA) toxicity and improve tissue cryopreservation, including 1) improved tissue warming rates through radiofrequency metal form and field optimization and 2) an experimentally verified predictive model to optimize CPA loading and rewarming to reduce toxicity. CPA loading is studied by microcomputed tomography (µCT) imaging, rewarming by thermal measurements, and modeling, and viability is measured after loading and/or cryopreservation by alamarBlue and histology. Loading conditions for three common CPA cocktails (6, 8.4, and 9.3 m) are designed, and then fast cooling and metal forms rewarming (up to 2000 °C min-1 ) achieve ≥90% viability in cryopreserved 1-2 mm arteries with various CPAs. Despite high viability by alamarBlue, histology shows subtle changes after cryopreservation suggesting some degree of cell damage especially in the central portions of thicker arteries up to 2 mm. While further studies are needed, these results show careful CPA loading and higher metal forms warming rates can help reduce CPA loading toxicity and improve outcomes from cryopreservation in tissues while also offering new protocols to preserve larger tissues ≥1 mm in thickness.

Use of X-Ray Computed Tomography for Monitoring Tissue Permeation Processes

Cryoprotectants are essential to prevent ice formation during tissue cryopreservation procedures. However, the control of their concentration and spatial distribution in the tissue is necessary to avoid toxicity and other damages associated with the cryopreservation procedures, especially for bulky samples such as tissues and organs. X-ray computed tomography measures the attenuation of an X-ray beam when it passes through a substance, depending on the material properties of the samples. The high electronic density of the sulfur atom of the dimethyl sulfoxide makes it an excellent cryoprotectant to be assessed by X-ray CT, and its concentration is proportional to the X-ray attenuation either at room or cryogenic temperatures. In addition, this imaging technique also allows to detect the formation of ice and eventual fractures within tissues during the cooling and warming processes. Therefore, X-ray CT technology is an excellent tool to assess and develop new cryopreservation procedures for tissues and organs.

Monitoring the quality of frozen-thawed venous segments using bioimpedance spectroscopy

OBJECTIVE

Storage at temperatures as low as -80 °C and below (cryopreservation) is considered a method for long-term preservation of cells and tissues, and especially blood vessel segments, which are to be used for clinical operations such as transplantation. However, the freezing and thawing processes themselves can induce injuries to the cells and tissue by damaging the structure and consequently functionality of the cryopreserved tissue. In addition, the level of damage is dependent on the rate of cooling and warming used during the freezing-thawing process. Current methods for monitoring the viability and integrity of cells and tissues after going through the freezing-thawing cycle are usually invasive and destructive to the cells and tissues. Therefore, employing monitoring methods which are not destructive to the cryopreserved tissues, such as bioimpedance measurement techniques, is necessary. In this study we aimed to design a bioimpedance measurement setup to detect changes in venous segments after freezing-thawing cycles in a noninvasive manner.

APPROACH

A bioimpedance spectroscopy measurement technique with a two-electrode setup was employed to monitor ovine jugular vein segments after each cycle during a process of seven freezing-thawing cycles.

MAIN RESULTS

The results demonstrated changes in the impedance spectra of the measured venous segments after each freezing-thawing cycle.

SIGNIFICANCE

This indicates that bioimpedance spectroscopy has the potential to be developed into a novel method for non-invasive and non-destructive monitoring of the viability of complex tissue after cryopreservation.

Spectroscopic monitoring of transport processes during loading of ovarian tissue with cryoprotective solutions

There is an increasing demand for female fertility preservation. Cryopreservation of ovarian cortex tissue by means of vitrification can be done ad-hoc and for pre-pubertal individuals. Obtaining a homogeneous distribution of protective agents in tissues is one of the major hurdles for successful preservation. Therefore, to rationally design vitrification strategies for tissues, it is needed to determine permeation kinetics of cryoprotective agents; to ensure homogeneous distribution while minimizing exposure time and toxicity effects. In this study, Fourier transform infrared spectroscopy (FTIR) was used to monitor diffusion of different components into porcine ovarian cortex tissue. Water fluxes and permeation kinetics of dimethyl sulfoxide (DMSO), glycerol (GLY), ethylene glycol (EG), and propylene glycol (PG) were investigated. Diffusion coefficients derived from FTIR data, were corroborated with differential scanning calorimetry and osmometer measurements. FTIR allowed real-time spectral fingerprinting of tissue during loading with mixtures of protective agents, while discriminating between different components and water. Exposure to vitrification solutions was found to cause drastic initial weight losses, which could be correlated with spectral features. Use of heavy water allowed distinguishing water fluxes associated with dehydration and permeation, both of which were found to precede permeation of cryoprotective agents. Overall, DMSO and EG were found to permeate faster than GLY and PG. In mixtures, however, solutes behave differently. The non-invasive spectroscopic method described here to study permeation of vitrification solution components into ovarian tissue can be applied to many other types of engineered constructs, tissues, and possibly organs.

Use of X-Ray Computed Tomography for Ice Detection Applied to Organ Cryopreservation

One of the main problems in the cryopreservation of biological samples is the formation of ice and the consequent mechanical damage to cells and tissues, due to the crystalline structure of ice and its associated mechanical damage. It is necessary to detect this deleterious formation of ice, especially in tissues and organs, because of their large volume and the complexity of their vascular system in the case of bulky organs. In this work, we propose the use of X-ray Computed Tomography (CT) to detect this ice formation inside tissues and organs. To achieve this aim, rabbit kidneys were loaded with cryoprotectant solutions containing Me₂SO at low temperatures (below -140°C). Drops of water with a volume between 2 and 8 μL were then introduced inside the organs. Finally, the rabbit kidneys were cooled to -196°C. Volumes of ice of up to 1 μL were detected in our CT device, with a resolution of up to 50 μm, validating the proposed technology. On the contrary, we analyzed bovine ovarian tissues cryopreserved with a controlled-rate slow-cooling protocol. CT images showed the different structure on the extracellular ice formation according to the procedure, and even the intracellular ice that can be formed in the tissues. These positive results have a straightforward application in the control of the formation of ice, of significant importance for the creation of biobanks.

An optimized controlled rate slow cooling protocol for bovine ovarian tissue cryopreservation by means of X-ray computed tomography

Cryopreservation and subsequent transplantation of ovarian tissue is the only option to preserve fertility in certain patients facing gonadotoxic treatment. So far, cryopreservation of ovarian tissue has been carried out mostly by a controlled rate slow cooling process, typically known as slow freezing. Even though there are still some concerns about the iatrogenic damage on the follicle population, this technique has been used in the more than 100 live births reported to date. It is well known that the control of the cryoprotectant loading in the tissue is crucial to in a cryopreservation procedure. We have used the technology of X-ray computed tomography to assess the concentration and distribution of dimethyl sulfoxide (one of the cryoprotectants most used in fertility preservation) inside pieces of bovine ovarian tissue after its cryopreservation. The low voltage used in our device (75 kV) and the high electronic density of this cryoprotectant makes the X-ray attenuation proportional to its concentration. By assessing and comparing the permeation and homogeneity of the cryoprotectant inside ovarian tissue fragments subjected to a controlled rate slow cooling process, we have characterized the effect of variations in the main parameters involved in the process, with the goal of achieving an optimized protocol with higher permeation of the cryoprotectant in the tissue. The most promissory results were obtained by increasing the initial concentration of dimethyl sulfoxide in the vehicle solution from 10 to 20%v/v.

Improved tissue cryopreservation using inductive heating of magnetic nanoparticles

Vitrification, a kinetic process of liquid solidification into glass, poses many potential benefits for tissue cryopreservation including indefinite storage, banking, and facilitation of tissue matching for transplantation. To date, however, successful rewarming of tissues vitrified in VS55, a cryoprotectant solution, can only be achieved by convective warming of small volumes on the order of 1 ml. Successful rewarming requires both uniform and fast rates to reduce thermal mechanical stress and cracks, and to prevent rewarming phase crystallization. We present a scalable nanowarming technology for 1- to 80-ml samples using radiofrequency-excited mesoporous silica-coated iron oxide nanoparticles in VS55. Advanced imaging including sweep imaging with Fourier transform and microcomputed tomography was used to verify loading and unloading of VS55 and nanoparticles and successful vitrification of porcine arteries. Nanowarming was then used to demonstrate uniform and rapid rewarming at >130°C/min in both physical (1 to 80 ml) and biological systems including human dermal fibroblast cells, porcine arteries and porcine aortic heart valve leaflet tissues (1 to 50 ml). Nanowarming yielded viability that matched control and/or exceeded gold standard convective warming in 1- to 50-ml systems, and improved viability compared to slow-warmed (crystallized) samples. Last, biomechanical testing displayed no significant biomechanical property changes in blood vessel length or elastic modulus after nanowarming compared to untreated fresh control porcine arteries. In aggregate, these results demonstrate new physical and biological evidence that nanowarming can improve the outcome of vitrified cryogenic storage of tissues in larger sample volumes.

Sucrose Diffusion in Decellularized Heart Valves for Freeze-Drying

Decellularized heart valves can be used as starter matrix implants for heart valve replacement therapies in terms of guided tissue regeneration. Decellularized matrices ideally need to be long-term storable to assure off-the-shelf availability. Freeze-drying is an attractive preservation method, allowing storage at room temperature in a dried state. However, the two inherent processing steps, freezing and drying, can cause severe damage to extracellular matrix (ECM) proteins and the overall tissue histoarchitecture and thus impair biomechanical characteristics of resulting matrices. Freeze-drying therefore requires a lyoprotective agent that stabilizes endogenous structural proteins during both substeps and that forms a protective glassy state at room temperature. To estimate incubation times needed to infiltrate decellularized heart valves with the lyoprotectant sucrose, temperature-dependent diffusion studies were done using Fourier transform infrared spectroscopy. Glycerol, a cryoprotective agent, was studied for comparison. Diffusion of both protectants was found to exhibit Arrhenius behavior. The activation energies of sucrose and glycerol diffusion were found to be 15.9 and 37.7 kJ·mol(-1), respectively. It was estimated that 4 h of incubation at 37°C is sufficient to infiltrate heart valves with sucrose before freeze-drying. Application of a 5% sucrose solution was shown to stabilize acellular valve scaffolds during freeze-drying. Such freeze-dried tissues, however, displayed pores, which were attributed to ice crystal damage, whereas vacuum-dried scaffolds in comparison revealed no pores after drying and rehydration. Exposure to a hygroscopic sucrose solution (80%) before freeze-drying was shown to be an effective method to diminish pore formation in freeze-dried ECMs: matrix structures closely resembled those of control samples that were not freeze-dried. Heart valve matrices were shown to be in a glassy state after drying, suggesting that they can be stored at room temperature.

The Scanning Cryomacroscope - A Device Prototype for the Study of Cryopreservation

A new cryomacroscope prototype-a visualization device for the in situ analysis of cryopreserved biological samples-is presented in the current study. In order to visualize samples larger than the field of view of the optical setup, a scanning mechanism is integrated into the system, which represents a key improvement over previous cryomacroscope prototypes. Another key feature of the new design is in its compatibility with available top-loading controlled-rate cooling chambers, which eliminates the need for a dedicated cooling mechanism. The objective for the current development is to create means to generate a single digital movie of an experimental investigation, with all relevant data overlaid. The visualization capabilities of the scanning cryomacroscope are demonstrated in the current study on the cryoprotective agent dimethyl sulfoxide and the cryoprotective cocktail DP6. Demonstrated effects include glass formation, various regimes of crystallization, thermal contraction, and fracture formation.

Storage of human biospecimens: selection of the optimal storage temperature

Millions of biological samples are currently kept at low tempertures in cryobanks/biorepositories for long-term storage. The quality of the biospecimen when thawed, however, is not only determined by processing of the biospecimen but the storage conditions as well. The overall objective of this article is to describe the scientific basis for selecting a storage temperature for a biospecimen based on current scientific understanding. To that end, this article reviews some physical basics of the temperature, nucleation, and ice crystal growth present in biological samples stored at low temperatures (-20°C to -196°C), and our current understanding of the role of temperature on the activity of degradative molecules present in biospecimens. The scientific literature relevant to the stability of specific biomarkers in human fluid, cell, and tissue biospecimens is also summarized for the range of temperatures between -20°C to -196°C. These studies demonstrate the importance of storage temperature on the stability of critical biomarkers for fluid, cell, and tissue biospecimens.

Review of biomaterial thermal property measurements in the cryogenic regime and their use for prediction of equilibrium and non-equilibrium freezing applications in cryobiology

It is well accepted in cryobiology that the temperature history and cooling rates experienced in biomaterials during freezing procedures correlate strongly with biological outcome. Therefore, heat transfer measurement and prediction in the cryogenic regime is central to the field. Although direct measurement of temperature history (i.e. heat transfer) can be performed, accuracy is usually achieved only for local measurements within a given system and cannot be readily generalized to another system without the aid of predictive models. The accuracy of these models rely upon thermal properties which are known to be highly dependent on temperature, and in the case of significant cryoprotectant loading, also on crystallized fraction. In this work, we review the available thermal properties of biomaterials in the cryogenic regime. The review shows a lack of properties for many biomaterials in the subzero temperature domain, and especially for systems with cryoprotective agents. Unfortunately, use of values from the limited data available (usually only down to -40 degrees C) lead to an underestimation of thermal property change (i.e. conductivity rise and specific heat drop due to ice crystallization) with lower temperatures. Conversely, use of surrogate values based solely on ice thermal properties lead to an overestimation of thermal property change for most biomaterials. Additionally, recent work extending the range of available thermal properties to -150 degrees C has shown that the thermal conductivity will drop in both PBS and tissue (liver) due to amorphous/glassy phases (versus crystalline) of biomaterials with the addition of cryoprotective additives such as glycerol. Thus, we investigated the implications of using approximated or constant property values versus measured temperature-dependent values for predicting temperature history during freezing in PBS (phosphate-buffered saline) and porcine liver with and without cryoprotectants (glycerol). Using measured property values (thermal conductivity, specific heat, and latent heat of phase change) of porcine liver, a standard was created which showed that values based on surrogate ice properties under-predicted cooling times, while constant properties (i.e. based on limited data reported near the freezing point) over-predicted cooling times. Additionally, a new iterative numerical method that accommodates non-equilibrium cooling effects as a function of time and position (i.e. crystallization versus amorphous phase) was used to predict temperature history during freezing in glycerol loaded systems. Results indicate that in addition to the increase in cooling times due to the lowering of thermal diffusivity with more glycerol, non-equilibrium effects such as the prevention of maximal crystallization (i.e. amorphous phases) will further increase required cooling times. It was also found that the amplified effect of non-equilibrium cooling and crystallization with system size prevents the thermal history to be described with non-dimensional lengths, such as was possible under equilibrium cooling. These results affirm the need to use accurate thermal properties that incorporate temperature dependence and crystallized fraction. Further studies are needed to extract thermal properties of other important biomaterials in the subzero temperature domain and to develop accurate numerical methods which take into account non-equilibrium cooling events encountered in cryobiology when partial or total vitrification occurs.

Frontiers in biotransport: water transport and hydration

Biotransport, by its nature, is concerned with the motions of molecules in biological systems while water remains as the most important and the most commonly studied molecule across all disciplines. In this review, we focus on biopreservation and thermal therapies from the perspective of water, exploring how its molecular motions, properties, kinetic, and thermodynamic transitions govern biotransport phenomena and enable preservation or controlled destruction of biological systems.

Frontiers in Biotransport: Water Transport and Hydration

Biotransport, by its nature, is concerned with the motions of molecules in biological systems while water remains as the most important and the most commonly studied molecule across all disciplines. In this review, we focus on biopreservation and thermal therapies from the perspective of water, exploring how its molecular motions, properties, kinetic, and thermodynamic transitions govern biotransport phenomena and enable preservation or controlled destruction of biological systems.