The Effect of Mechanical Loading on the Metabolism of Growth Plate Chondrocytes

Effect of hip dysplasia on the development of the femoral head growth plate

Purpose

The purpose of this study was to observe whether developmental dysplasia of the hip (DDH) affects the development of the femoral head growth plate and to analyze the risk factors.

Methods

We selected female patients aged between 11 and 20 years with unilateral DDH and unclosed femoral head growth plate (s). The selected patients underwent anteroposterior radiography of the hip joint to compare the degree of development of the femoral head growth plate on both sides and to identify risk factors that affect the development of the growth plate in the femoral head.

Results

We included 48 female patients with unilateral DDH, with an average age of 14 years (range: 11.1-18.5 years) and an average BMI of 20.4 kg/m² (range: 15.5 kg/m²-27.9 kg/m²). Among them, 23 patients had earlier development of the femoral head growth plate on the affected side than on the healthy side, while the degree of development of the femoral head growth plate in 25 patients was the same as that on the contralateral side. When the Tönnis angle was greater than 29.5°C and/or the Reimers migration index was greater than 48.5%, there was a statistically significant difference in the acceleration of femoral head growth plate development.

Conclusion

An abnormal relative position of the acetabulum-femoral head caused by DDH can accelerate closure of the femoral head growth plate in immature female patients. The risk factors are a Tönnis angle greater than 29.5°C and/or Reimers migration index greater than 48.5%.

Roles of Local Soluble Factors in Maintaining the Growth Plate: An Update

The growth plate is a cartilaginous tissue found at the ends of growing long bones, which contributes to the lengthening of bones during development. This unique structure contains at least three distinctive layers, including resting, proliferative, and hypertrophic chondrocyte zones, maintained by a complex regulatory network. Due to its soft tissue nature, the growth plate is the most susceptible tissue of the growing skeleton to injury in childhood. Although most growth plate damage in fractures can heal, some damage can result in growth arrest or disorder, impairing leg length and resulting in deformity. In this review, we re-visit previously established knowledge about the regulatory network that maintains the growth plate and integrate current research displaying the most recent progress. Next, we highlight local secretary factors, such as Wnt, Indian hedgehog (Ihh), and parathyroid hormone-related peptide (PTHrP), and dissect their roles and interactions in maintaining cell function and phenotype in different zones. Lastly, we discuss future research topics that can further our understanding of this unique tissue. Given the unmet need to engineer the growth plate, we also discuss the potential of creating particular patterns of soluble factors and generating them in vitro.

Chondromodulin is necessary for cartilage callus distraction in mice

Chondromodulin (Cnmd) is a glycoprotein known to stimulate chondrocyte growth. We examined in this study the expression and functional role of Cnmd during distraction osteogenesis that is modulated by mechanical forces. The right tibiae of the mice were separated by osteotomy and subjected to slow progressive distraction using an external fixator. In situ hybridization and immunohistochemical analyses of the lengthened segment revealed that Cnmd mRNA and its protein in wild-type mice were localized in the cartilage callus, which was initially generated in the lag phase and was lengthened gradually during the distraction phase. In Cnmd null (Cnmd-/-) mice, less cartilage callus was observed, and the distraction gap was filled by fibrous tissues. Additionally, radiological and histological investigations demonstrated delayed bone consolidation and remodeling of the lengthened segment in Cnmd-/- mice. Eventually, Cnmd deficiency caused a one-week delay in the peak expression of VEGF, MMP2, and MMP9 genes and the subsequent angiogenesis and osteoclastogenesis. We conclude that Cnmd is necessary for cartilage callus distraction.

Tissue engineering in growth plate cartilage regeneration: Mechanisms to therapeutic strategies

The repair of growth plate injuries is a highly complex process that involves precise spatiotemporal regulation of multiple cell types. While significant progress has been made in understanding the pathological mechanisms underlying growth plate injuries, effectively regulating this process to regenerate the injured growth plate cartilage remains a challenge. Tissue engineering technology has emerged as a promising therapeutic approach for achieving tissue regeneration through the use of functional biological materials, seed cells and biological factors, and it is now widely applied to the regeneration of bone and cartilage. However, due to the unique structure and function of growth plate cartilage, distinct strategies are required for effective regeneration. Thus, this review provides an overview of current research on the application of tissue engineering to promote growth plate regeneration. It aims to elucidates the underlying mechanisms by which tissue engineering promotes growth plate regeneration and to provide novel insights and therapeutic strategies for future research on the regeneration of growth plate.

Spectral characterization of cell surface motion for mechanistic investigations of cellular mechanobiology

Understanding the specific mechanisms responsible for anabolic and catabolic responses to static or dynamic force are largely poorly understood. Because of this, most research groups studying mechanotransduction due to dynamic forces employ an empirical approach in deciding what frequencies to apply during experiments. While this has been shown to elucidate valuable information regarding how cells respond under controlled provocation, it is often difficult or impossible to determine a true optimal frequency for force application, as many intracellular complexes are involved in receiving, propagating, and responding to a given stimulus. Here we present a novel adaptation of an analytical technique from the fields of civil and mechanical engineering that may open the door to direct measurement of mechanobiological cellular frequencies which could be used to target specific cell signaling pathways leveraging synergy between outside-in and inside-out mechanotransduction approaches. This information could be useful in identifying how specific proteins are involved in the homeostatic balance, or disruption thereof, of cells and tissue, furthering the understanding of the pathogenesis and progression of many diseases across a wide variety of cell types, which may one day lead to the development of novel mechanobiological therapies for clinical use.

Pneumatic piston hydrostatic bioreactor for cartilage tissue engineering

During exercise, mechanical loads from the body are transduced into interstitial fluid pressure changes which are sensed as dynamic hydrostatic forces by cells in cartilage. The effects of these loading forces in health and disease are of interest to biologists, but the availability of affordable equipment for in vitro experimentation is an obstacle to research progress. Here, we report the development of a cost-effective hydropneumatic bioreactor system for research in mechanobiology. The bioreactor was assembled from readily available components (a closed-loop stepped motor and pneumatic actuator) and a minimal number of easily-machined crankshaft parts, whilst the cell culture chambers were custom designed by the biologists using CAD and entirely 3 D printed in PLA. The bioreactor system was shown to be capable of providing cyclic pulsed pressure waves at a user-defined amplitude and frequency ranging from 0 to 400 kPa and up to 3.5 Hz, which are physiologically relevant for cartilage. Tissue engineered cartilage was created from primary human chondrocytes and cultured in the bioreactor for five days with three hours/day cyclic pressure (300 kPa at 1 Hz), simulating moderate physical exercise. Bioreactor-stimulated chondrocytes significantly increased their metabolic activity (by 21%) and glycosaminoglycan synthesis (by 24%), demonstrating effective cellular transduction of mechanosensing. Our Open Design approach focused on using 'off-the-shelf' pneumatic hardware and connectors, open source software and in-house 3 D printing of bespoke cell culture containers to resolve long-standing problems in the availability of affordable bioreactors for laboratory research.

How do bones grow? A mathematical description of the mechanobiological behavior of the epiphyseal plate

Growth modulation is an emerging method for the treatment of skeletal deformities originating in the long bones or the vertebral bodies. It requires the controlled application of mechanical loads to the affected bone, causing an alteration of the growth and ossification process occurring in a cartilaginous region called epiphyseal growth plate or physis. In order to avoid the possibility of under- or over-correction, quantification of the applied forces is necessary. Pursuing this goal, here we propose a phenomenological model of mechanobiological effects on the epiphyseal growth plate, based on the observed similarity between the mechanobiologically induced growth and viscoelastic material behavior. The model incorporates mechanical loading effects on growth direction, growth rate and ossification speed; it also allows to evaluate the occurrence of transient effects. Model consistency was tested against a rather large set of experiments existing in the literature. A generic simplified geometrical model of bones was established for this. Analytical solutions for growth and ossification evolution were obtained for different loading conditions, allowing to test the ability of the model to describe bone growth under various kinds of mechanical loading conditions. Model-predicted changes regarding epiphyseal growth plate thickness as well as longitudinal growth speed are consistent with experiments in which static tension or compression were applied to long bones. Results suggest that when the mechanical load is sinusoidally variable, conflicting data existing in the literature could be explained by a previously unconsidered effect of the the applied load initial phase. The model can accurately fit data regarding torsional loads effects on growth. Mechanobiological data for humans is very scarce. For this reason, when possible, the model parameters values were estimated, for the proposed generic geometry, after growth measurements in animal models available in the literature. Although it is not possible to assert their validity for humans, the proposed model along with the obtained parameters values give a rational foundation to be used in more advanced computational studies.

Cyclic mechanical strain with high-tensile triggers autophagy in growth plate chondrocytes

Background

Mechanical loading has been widely considered to be essential for growth plate to maintain metabolism and development. Cyclic mechanical strain has been demonstrated to induce autophagy, whereas the relationship between cyclic tensile strain (CTS) and autophagy in growth plate chondrocytes (GPCs) is not clear. The objective of this study was to investigate whether CTS can regulate autophagy in GPCs in vitro and explore the potential mechanisms of this regulation.

Methods

The 2-week-old Sprague–Dawley rat GPCs were subjected to CTS of varying magnitude and duration at a frequency of 2.0 Hz. The mRNA levels of autophagy-related genes were measured by RT-qPCR. The autophagy in GPCs was verified by transmission electron microscopy (TME), immunofluorescence and Western blotting. The fluorescence-activated cell sorting (FACS) was employed to detect the percentage of apoptotic and necrotic cells.

Results

In GPCs, CTS significantly increased the mRNA and protein levels of autophagy-related genes, such as LC3, ULK1, ATG5 and BECN1 in a magnitude- and time-dependent manner. There was no significant difference in the proportion of apoptotic and necrotic cells between control group and CTS group. The autophagy inhibitors, 3-methyladenine (3MA) and chloroquine (CQ) reversed the CTS-induced autophagy via promoting the formation of autophagosomes. Cytochalasin D (cytoD), an inhibitor of G-actin polymerization into F-actin, could effectively block the CTS-induced autophagy in GPCs.

Conclusion

Cyclic mechanical strain with high-tensile triggers autophagy in GPCs, which can be suppressed by 3MA and CQ, and cytoskeletal F-actin microfilaments organization plays a key role in chondrocytes’ response to mechanical loading.

A tool for solving bone growth related problems using finite elements adaptive meshes

Long bones geometry changes in response to longitudinal growth in the epiphyseal plates and hydroxyapatite apposition in the periosteum. Due to its relevance for growth modulation and orthotics performance, researchers have extensively modeled these phenomena, using the finite elements method for it almost since the introduction of modern computers. This is a rather complex task that, besides the inherent difficulty of solving the models equations, requires considering a moving boundary. Here, the development of a new computational tool for its resolution is described. A generalized formulation of these problems is established based on the most common approaches taken in the literature and a novel finite elements algorithm is proposed for its resolution. The later allows a significant reduction of the spatial discretization requirements, the computational cost and the numerical errors associated with more classical approaches. The potentiality of the method is demonstrated by its application to three cases of practical interest, namely, hemiepiphysiodesis treatment, growth in the distal femur and bone remodeling around hip prosthesis. Eight relevant cases of study and an open source implementation of the proposed algorithm are also provided as supplementary material.

Sub-toxic levels of cobalt ions impair chondrocyte mechanostranduction via HDAC6-dependent primary cilia shortening

Cobalt ions are the main wear particles associated with orthopaedic implants, causing adverse complications due to cytotoxicity and inflammatory mediators. Recent studies have shown that sub-toxic levels of cobalt ions regulate matrix synthesis and inflammation, but the influence of cobalt ions on mechanotransduction remains unclear. Previously, we reported that sub-toxic levels of cobalt ions modulated primary cilia, which are crucial for mechanotransduction. This study therefore aimed to investigate the effect of cobalt ions on chondrocyte mechanosensation in response to cyclic tensile strain and the association with primary cilia. Sub-toxic levels of cobalt ions impaired chondrocyte mechanosensation and affected the gene expression of aggrecan, collagen II and MMP-13. Moreover, cobalt ions induced HDAC6-dependent primary cilia disassembly, which was associated with either cytoplasmic or ciliary α-tubulin deacetylation. Pharmaceutical HDAC6 inhibition with tubacin restored primary cilia length and mechanotransduction, whereas chemical depletion of primary cilia by chloral hydrate prevented mechanosignalling. Thus, sub-toxic levels of cobalt ions impaired chondrocyte mechanotransduction via HDAC6 activation, which was associated with tubulin deacetylation and primary cilia shortening.

Mechanobiological based long bone growth model for the design of limb deformities correction devices

A mechanobiological model of bone growth aimed for the design of medical devices for the treatment of limb deformities during childhood and adolescence was developed. Dimensional analysis was introduced as a tool for the systematic evaluation of the influence attributed to different factors that might modify the bone growth process. Simplifications were proposed, allowing the reduction of bone growth relevant parameters to four non-dimensional numbers, representing the chondrocyte sensitivity to stress, the epiphyseal plate geometry, the bone rigidity and the time. Benchmark situations considered for model validation were bone growth under normal conditions and an epiphyseal stapling treatment. A finite elements approach was used to analyze bone growth in the distal portion of the femur. Results are shown to be consistent with corresponding clinical data published in the literature, which indicates the potential of the here proposed method for the design of specific devices and treatments.

Mechanical stimulation of growth plate chondrocytes: Previous approaches and future directions

Growth plate cartilage resides near the ends of long bones and is the primary driver of skeletal growth. During growth, both intrinsically and extrinsically generated mechanical stresses act on chondrocytes in the growth plate. Although the role of mechanical stresses in promoting tissue growth and homeostasis has been strongly demonstrated in articular cartilage of the major skeletal joints, effects of stresses on growth plate cartilage and bone growth are not as well established. Here, we review the literature on mechanobiology in growth plate cartilage at macroscopic and microscopic scales, with particular emphasis on comparison of results obtained using different methodological approaches, as well as from whole animal and in vitro experiments. To answer these questions, macroscopic mechanical stimulators have been developed and applied to study mechanobiology of growth plate cartilage and chondrocytes. However, the previous approaches have tested a limited number of stress conditions, and the mechanobiology of a single chondrocyte has not been well studied due to limitations of the macroscopic mechanical stimulators. We explore how microfluidics devices can overcome these limitations and improve current understanding of growth plate chondrocyte mechanobiology. In particular, microfluidic devices can generate multiple stress conditions in a single platform and enable real-time monitoring of metabolism and cellular behavior using optical microscopy. Systematic characterization of the chondrocytes using microfluidics will enhance our understanding of how to use mechanical stresses to control the bone growth and the properties of tissue-engineered growth plate cartilage.

Biophysical Stimuli: A Review of Electrical and Mechanical Stimulation in Hyaline Cartilage

OBJECTIVE

Hyaline cartilage degenerative pathologies induce morphologic and biomechanical changes resulting in cartilage tissue damage. In pursuit of therapeutic options, electrical and mechanical stimulation have been proposed for improving tissue engineering approaches for cartilage repair. The purpose of this review was to highlight the effect of electrical stimulation and mechanical stimuli in chondrocyte behavior.

DESIGN

Different information sources and the MEDLINE database were systematically revised to summarize the different contributions for the past 40 years.

RESULTS

It has been shown that electric stimulation may increase cell proliferation and stimulate the synthesis of molecules associated with the extracellular matrix of the articular cartilage, such as collagen type II, aggrecan and glycosaminoglycans, while mechanical loads trigger anabolic and catabolic responses in chondrocytes.

CONCLUSION

The biophysical stimuli can increase cell proliferation and stimulate molecules associated with hyaline cartilage extracellular matrix maintenance.

The Emerging Role of Glucose Metabolism in Cartilage Development

PURPOSE OF REVIEW

Proper cartilage development is critical to bone formation during endochondral ossification. This review highlights the current understanding of various aspects of glucose metabolism in chondrocytes during cartilage development.

RECENT FINDINGS

Recent studies indicate that chondrocytes transdifferentiate into osteoblasts and bone marrow stromal cells during endochondral ossification. In cartilage development, signaling molecules, including IGF2 and BMP2, tightly control glucose uptake and utilization in a stage-specific manner. Perturbation of glucose metabolism alters the course of chondrocyte maturation, suggesting a key role for glucose metabolism during endochondral ossification. During prenatal and postnatal growth, chondrocytes experience bursts of nutrient availability and energy expenditure, which demand sophisticated control of the glucose-dependent processes of cartilage matrix production, cell proliferation, and hypertrophy. Investigating the regulation of glucose metabolism may therefore lead to a unifying mechanism for signaling events in cartilage development and provide insight into causes of skeletal growth abnormalities.

The impact of bipedal mechanical loading history on longitudinal long bone growth

Longitudinal bone growth is accomplished through a process where proliferating chondrocytes produce cartilage in the growth plate, which ultimately ossifies. Environmental influences, like mechanical loading, can moderate the growth of this cartilage, which can alter bone length. However, little is known about how specific behaviors like bipedalism, which is characterized by a shift in body mass (mechanical load), to the lower limbs, may impact bone growth. This study uses an experimental approach to induce bipedal behaviors in a rodent model (Rattus norvegicus) over a 12-week period using a treadmill-mounted harness system to test how rat hindlimbs respond to the following loading conditions: 1) fully loaded bipedal walking, 2) partially loaded bipedal walking, 3) standing, 4) quadrupedal walking, and 5) no exercise control. These experimental conditions test whether mechanical loading from 1) locomotor or postural behaviors, and 2) a change in the magnitude of load can moderate longitudinal bone growth in the femur and tibia, relative to controls. The results demonstrate that fully loaded bipedal walking and bipedal standing groups showed significant differences in the percentage change in length for the tibia and femur. When comparing the change from baseline, which control for body mass, all bipedal groups showed significant differences in tibia length compared to control groups. However, there were no absolute differences in bone length, which suggests that mechanical loads from bipedal behaviors may instead be moderating changes in growth velocity. Implications for the relationship between bipedal behaviors and longitudinal bone growth are discussed.

Skeletal stiffening in an amphibious fish out of water is a response to increased body weight

Terrestrial animals must support their bodies against gravity, while aquatic animals are effectively weightless because of buoyant support from water. Given this evolutionary history of minimal gravitational loading of fishes in water, it has been hypothesized that weight-responsive musculoskeletal systems evolved during the tetrapod invasion of land and are thus absent in fishes. Amphibious fishes, however, experience increased effective weight when out of water - are these fishes responsive to gravitational loading? Contrary to the tetrapod-origin hypothesis, we found that terrestrial acclimation reversibly increased gill arch stiffness (∼60% increase) in the amphibious fish Kryptolebias marmoratus when loaded normally by gravity, but not under simulated microgravity. Quantitative proteomics analysis revealed that this change in mechanical properties occurred via increased abundance of proteins responsible for bone mineralization in other fishes as well as in tetrapods. Type X collagen, associated with endochondral bone growth, increased in abundance almost ninefold after terrestrial acclimation. Collagen isoforms known to promote extracellular matrix cross-linking and cause tissue stiffening, such as types IX and XII collagen, also increased in abundance. Finally, more densely packed collagen fibrils in both gill arches and filaments were observed microscopically in terrestrially acclimated fish. Our results demonstrate that the mechanical properties of the fish musculoskeletal system can be fine-tuned in response to changes in effective body weight using biochemical pathways similar to those in mammals, suggesting that weight sensing is an ancestral vertebrate trait rather than a tetrapod innovation.

Cellular scale model of growth plate: An in silico model of chondrocyte hypertrophy

The growth plate is the responsible for longitudinal bone growth. It is a cartilaginous structure formed by chondrocytes that are continuously undergoing a differentiation process that starts with a highly proliferative state, followed by cellular hypertrophy, and finally tissue ossification. Within the growth plate chondrocytes display a characteristic columnar organization that potentiates longitudinal growth. Both chondrocyte organization and hypertrophy are highly regulated processes influenced by biochemical and mechanical stimuli. These processes have been studied mainly using in vivo models, although there are few computational approaches focused on the rate of ossification rather than events at cellular level. Here, we developed a model of cellular behavior integrating biochemical and structural factors in a single column of cells in the growth plate. In our model proliferation and hypertrophy were controlled by biochemical regulatory loop formed between Ihh and PTHrP (modeled as a set of reaction-diffusion equations), while cell growth was controlled by mechanical loading. We also examined the effects of static loading. The model reproduced the proliferation and hypertrophy of chondrocytes in organized columns. This model constitutes a first step towards the development of mechanobiological models that can be used to study biochemical interactions during endochondral ossification.

DEVELOPMENTAL SCENARIOS OF THE EPIPHYSIS AND GROWTH PLATE UPON MECHANICAL LOADING: A COMPUTATIONAL MODEL

Long bone growth relies on the continuous bone formation from cartilaginous tissue (endochondral ossification). This process starts in the central region (diaphysis) of the forming bone and short before birth, ossification starts in bone extremes (epiphysis). A cartilaginous region known as the growth plate is maintained until adolescence between epiphysis and diaphysis to further contribute to longitudinal growth. Even though there are several biochemical factors controlling this process, there is evidence revealing an important regulatory role of mechanical stimuli. Up to now approaches to understand mechanical effects on ossification have been limited to epiphysis. In this work, based on Carter's mathematical model for epiphyseal ossification, we explored human growth plate response to mechanical loads. We analyzed growth plate stress distribution using finite element method for a generic bone considering different stages of bone development in order to shed light on mechanical contribution to growth plate function. Results obtained revealed that mechanical environment within the growth plate change as epiphyseal ossification progresses. Furthermore, results were compared with physiological behavior, as reported in literature, to analyze the role of mechanical stimulus over development. Our results suggest that mechanical stimuli may play different regulation roles on growth plate behavior through normal long bone development. However, as this approach only took into account mechanical aspects, failed to accurately predict biological behavior in some stages. In order to derive biologically relevant information from computational models it is necessary to consider biological contribution and possible mechanical–biochemical interactions affecting human growth plate physiology. Along these lines, we propose the dilatatorial parameter k used by Carter et al. should assume different values corresponding to the developmental stage in question. Thus, reflecting biochemical contribution changes over time.

Impact of mechanical stretch on the cell behaviors of bone and surrounding tissues

Mechanical loading is recognized to play an important role in regulating the behaviors of cells in bone and surrounding tissues in vivo. Many in vitro studies have been conducted to determine the effects of mechanical loading on individual cell types of the tissues. In this review, we focus specifically on the use of the Flexercell system as a tool for studying cellular responses to mechanical stretch. We assess the literature describing the impact of mechanical stretch on different cell types from bone, muscle, tendon, ligament, and cartilage, describing individual cell phenotype responses. In addition, we review evidence regarding the mechanotransduction pathways that are activated to potentiate these phenotype responses in different cell populations.

The effects of oxygen level and glucose concentration on the metabolism of porcine TMJ disc cells

OBJECTIVE

To determine the combined effect of oxygen level and glucose concentration on cell viability, ATP production, and matrix synthesis of temporomandibular joint (TMJ) disc cells.

DESIGN

TMJ disc cells were isolated from pigs aged 6-8 months and cultured in a monolayer. Cell cultures were preconditioned for 48 h with 0, 1.5, 5, or 25 mM glucose DMEM under 1%, 5%, 10%, or 21% O2 level, respectively. The cell viability was measured using the WST-1 assay. ATP production was determined using the Luciferin-Luciferase assay. Collagen and proteoglycan synthesis were determined by measuring the incorporation of [2, 3-(3)H] proline and [(35)S] sulfate into the cells, respectively.

RESULTS

TMJ disc cell viability significantly decreased (P < 0.0001) without glucose. With glucose present, decreased oxygen levels significantly increased viability (P < 0.0001), while a decrease in glucose concentration significantly decreased viability (P < 0.0001). With glucose present, decreasing oxygen levels significantly reduced ATP production (P < 0.0001) and matrix synthesis (P < 0.0001). A decreased glucose concentration significantly decreased collagen synthesis (P < 0.0001). The interaction between glucose and oxygen was significant in regards to cell viability (P < 0.0001), ATP production (P = 0.00015), and collagen (P = 0.0002) and proteoglycan synthesis (P < 0.0001).

CONCLUSIONS

Although both glucose and oxygen are important, glucose is the limiting nutrient for TMJ disc cell survival. At low oxygen levels, the production of ATP, collagen, and proteoglycan are severely inhibited. These results suggest that steeper nutrient gradients may exist in the TMJ disc and it may be vulnerable to pathological events that impede nutrient supply.

Moderate cyclic tensile strain alters the assembly of cartilage extracellular matrix proteins in vitro

Mechanical loading influences the structural and mechanical properties of articular cartilage. The cartilage matrix protein collagen II essentially determines the tensile properties of the tissue and is adapted in response to loading. The collagen II network is stabilized by the collagen II-binding cartilage oligomeric matrix protein (COMP), collagen IX, and matrilin-3. However, the effect of mechanical loading on these extracellular matrix proteins is not yet understood. Therefore, the aim of this study was to investigate if and how chondrocytes assemble the extracellular matrix proteins collagen II, COMP, collagen IX, and matrilin-3 in response to mechanical loading. Primary murine chondrocytes were applied to cyclic tensile strain (6%, 0.5 Hz, 30 min per day at three consecutive days). The localization of collagen II, COMP, collagen IX, and matrilin-3 in loaded and unloaded cells was determined by immunofluorescence staining. The messenger ribo nucleic acid (mRNA) expression levels and synthesis of the proteins were analyzed using reverse transcription-polymerase chain reaction (RT-PCR) and western blots. Immunofluorescence staining demonstrated that the pattern of collagen II distribution was altered by loading. In loaded chondrocytes, collagen II containing fibrils appeared thicker and strongly co-stained for COMP and collagen IX, whereas the collagen network from unloaded cells was more diffuse and showed minor costaining. Further, the applied load led to a higher amount of COMP in the matrix, determined by western blot analysis. Our results show that moderate cyclic tensile strain altered the assembly of the extracellular collagen network. However, changes in protein amount were only observed for COMP, but not for collagen II, collagen IX, or matrilin-3. The data suggest that the adaptation to mechanical loading is not always the result of changes in RNA and/or protein expression but might also be the result of changes in matrix assembly and structure.

Effects of cyclic tensile strain on chondrocyte metabolism: a systematic review

Chondrocytes reorganize the extracellular matrix of articular cartilage in response to externally applied loads. Thereby, different loading characteristics lead to different biological responses. Despite of active research in this area, it is still unclear which parts of the extracellular matrix adapt in what ways, and how specific loading characteristics affect matrix changes. This review focuses on the influence of cyclic tensile strain on chondrocyte metabolism in vitro. It also aimed to identify anabolic or catabolic chondrocyte responses to different loading protocols. The key findings show that loading cells up to 3% strain, 0.17 Hz, and 2 h, resulted in weak or no biological responses. Loading between 3–10% strain, 0.17–0.5 Hz, and 2–12 h led to anabolic responses; and above 10% strain, 0.5 Hz, and 12 h catabolic events predominated. However, this review also discusses that various other factors are involved in the remodeling of the extracellular matrix in response to loading, and that parameters like an inflammatory environment might influence the biological response.

Mechanical activation of mammalian target of rapamycin pathway is required for cartilage development

Mechanical stress regulates development by modulating cell signaling and gene expression. However, the cytoplasmic components mediating mechanotransduction remain unclear. In this study, elimination of muscle contraction during chicken embryonic development resulted in a reduction in the activity of mammalian target of rapamycin (mTOR) in the cartilaginous growth plate. Inhibition of mTOR activity led to significant inhibition of chondrocyte proliferation, cartilage tissue growth, and expression of chondrogenic genes, including Indian hedgehog (Ihh), a critical mediator of mechanotransduction. Conversely, cyclic loading (1 Hz, 5% matrix deformation) of embryonic chicken growth plate chondrocytes in 3-dimensional (3D) collagen scaffolding induced sustained activation of mTOR. Mechanical activation of mTOR occurred in serum-free medium, indicating that it is independent of growth factor or nutrients. Treatment of chondrocytes with Rapa abolished mechanical activation of cell proliferation and Ihh gene expression. Cyclic loading of chondroprogenitor cells deficient in SH2-containing protein tyrosine phosphatase 2 (Shp2) further enhanced mechanical activation of mTOR, cell proliferation, and chondrogenic gene expression. This result suggests that Shp2 is an antagonist of mechanotransduction through inhibition of mTOR activity. Our data demonstrate that mechanical activation of mTOR is necessary for cell proliferation, chondrogenesis, and cartilage growth during bone development, and that mTOR is an essential mechanotransduction component modulated by Shp2 in the cytoplasm.

Relationship between the skeletal maturation of the distal attachment of the patellar tendon and physical features in preadolescent male football players

PURPOSE

The aim of this study was to compare ultrasonography stages of the tibial tuberosity development and physical features.

METHODS

This study examined 200 knees in 100 male football players aged 10-15 years. Tibial tuberosity development on ultrasonography was divided into 3 stages: Sonolucent stage (stage S), Individual stage (stage I), and Connective stage (stage C). Age, height, quadriceps and hamstring muscle tightness, and muscle strength in knee extension and flexion were determined. These findings were compared with the respective stages of development.

RESULTS

The tibial tuberosity was stage S in 27 knees, stage I in 69 knees, and stage C in 104 knees, with right and left sides at the same stage in 95 %. Average age and height significantly increased with advancing tibial tuberosity development. Quadriceps tightness increased with tibial tuberosity development. Hamstring tightness decreased with development. The strength of both knee extension and flexion increased with advancing development, with a greater change seen in knee extension, hamstring/quadriceps ratio: stage C, 0.74; stage A, 0.64; stage E, 0.53.

CONCLUSIONS

Osgood-Schlatter pathogenesis reportedly involves increased quadriceps tightness with rapidly increasing femoral length during tibial tuberosity development. In this study, it was confirmed that quadriceps tightness increased, yet hamstring tightness decreased, suggesting that quadriceps tightness is not due to femoral length alone. Other factors, including muscle strength, may be involved. The study shows that thigh muscle tightness and thigh muscle performance change with the skeletal maturation of the distal attachment of the patellar tendon. These results add new information to the pathogenesis of Osgood-Schlatter disease.

Mechanics and validation of an in vivo device to apply torsional loading to caudal vertebrae

Axial loading of vertebral bodies has been shown to modulate growth. Longitudinal growth of the vertebral body is impaired by compressive forces while growth is stimulated by distraction. Investigations of torsional loading on the growth plate in the literature are few. The purposes of this study were two-fold: (1) to develop a torque device to apply torsional loads on caudal vertebrae and (2) investigate numerically and in vivo the feasibility of the application of the torque on the growth plate. A controllable torque device was developed and validated in the laboratory. A finite element study was implemented to examine mechanically the deformation of the growth plate and disk. A rat tail model was used with six 5-week-old male Sprague-Dawley rats. Three rats received a static torsional load, and three rats received no torque and served as sham control rats. A histological study was undertaken to investigate possible morphological changes in the growth plate, disk, and caudal bone. The device successfully applied a controlled torsional load to the caudal vertebrae. The limited study using finite element analysis (FEA) and histology demonstrated that applied torque increased lateral disk height and increased disk width. The study also found that the growth plate height increased, and the width decreased as well as a curved displacement of the growth plate. No significant changes were observed from the in vivo study in the bone. The torsional device does apply controlled torque and is well tolerated by the animal. This study with limited samples appears to result in morphological changes in the growth plate and disk. The use of this device to further investigate changes in the disk and growth plate is feasible.

Regulation of PTHrP expression by cyclic mechanical strain in postnatal growth plate chondrocytes

Mechanical loading has been widely considered to be a crucial regulatory factor for growth plate development, but the exact mechanisms of this regulation are still not completely understood. In the growth plate, parathyroid hormone-related protein (PTHrP) regulates chondrocyte differentiation and longitudinal growth. Cyclic mechanical strain has been demonstrated to influence growth plate chondrocyte differentiation and metabolism, whereas the relationship between cyclic mechanical strain and PTHrP expression is not clear. The objective of this study was to investigate whether short-term cyclic tensile strain regulates PTHrP expression in postnatal growth plate chondrocytes in vitro and to explore whether the organization of cytoskeletal F-actin microfilaments is involved in this process. To this end, we obtained growth plate chondrocytes from 2-week-old Sprague-Dawley rats and sorted prehypertrophic and hypertrophic chondrocytes using immunomagnetic beads coated with anti-CD200 antibody. The sorted chondrocytes were subjected to cyclic tensile strain of varying magnitude and duration at a frequency of 0.5 Hz. We found that cyclic strain regulates PTHrP expression in a magnitude- and time-dependent manner. Incubation of chondrocytes with cytochalasin D, an actin microfilament-disrupting reagent, blocked the induction of PTHrP expression in response to strain. The results suggest that short-term cyclic tensile strain induces PTHrP expression in postnatal growth plate prehypertrophic and hypertrophic chondrocytes and that PTHrP expression by these chondrocytes may subsequently affect growth plate development. The results also support the idea that the organization of cytoskeletal F-actin microfilaments plays an important role in mechanotransduction.

Multiarray cell stretching platform for high-magnification real-time imaging

AIM

This article reports the development of a multiarray microchip with real-time imaging capability to apply mechanical strains onto monolayered cell cultures.

MATERIALS & METHODS

Cells were cultured on an 8-µm thick membrane that was positioned in the microscope focal plane throughout the stretching process. Each stretching unit was assembled from three elastomeric layers and a glass coverslip. A programmable pneumatic control system was developed to actuate this platform. Multiple stretching experiments were conducted with various cell lines.

RESULTS

The platform provides a maximum uniform strain of 69%. Acute and long-term cell morphological changes were observed. The supreme imaging capability was verified by real-time imaging of transfected COS-7 stretching and poststretching imaging of immunofluorescence-stained PTK2.

CONCLUSION

The platform reported here is a powerful tool for studying mechanically induced physiological changes in cells. Such a device could be used in tissue regeneration for maintaining essential cell growth conditions.

Studies on a Novel Bioreactor Design for Chondrocyte Culture

A bioreactor system plays an important role in tissue engineering and enables reproduction and controlled changes in the environmental factor. The bioreactor provides technical means to perform controlled processes in safe and reduced reproducible generation of time. Cartilage cells were grown in vitro by mimicking the in vivo condition. The basic unit of cartilage, that is, chondrocyte, requires sufficient shear, strain, and hydrodynamic pressure for regular growth as it is nonvascular tissue. An attempt has been made to design a novel airlift reactor for chondrocyte culture, and the reactor has been evaluated for its performance. The design includes internal loop wavy riser airlift reactor for chondrocyte culture with 5% CO2 sparging which gives a good yield of chondrocyte after 28 days. The wavy riser provides more surfaces for collision of fluid flow so to create the turbulence. Also, the horizontal semicircular baffles create an angle of 180° which helps in high shear rate. The optimized L/D ratio of the designed airlift reactor (for chondrocyte culture) is 5.67, and it also exhibits good mixing performance.

Expression of matrix metalloproteinases in human growth plate chondrocytes is enhanced at high levels of mechanical loading

Matrix metalloproteinases (MMPs), responsible for extracellular matrix remodelling and angiogenesis, might play a major role in the response of the growth plate to detrimental loads that lead to overuse injuries in young athletes. In order to test this hypothesis, human growth plate chondrocytes were subjected to mechanical forces equal to either physiological loads, near detrimental or detrimental loads for two hours. In addition, these cells were exposed to physiological loads for up to 24 hours. Changes in the expression of MMPs -2, -3 and -13 were investigated.

We found that expression of MMPs in cultured human growth plate chondrocytes increases in a linear manner with increased duration and intensity of loading. We also showed for the first time that physiological loads have the same effect on growth plate chondrocytes over a long period of time as detrimental loads applied for a short period.

These findings confirm the involvement of MMPs in overuse injuries in children. We suggest that training programmes for immature athletes should be reconsidered in order to avoid detrimental stresses and over-expression of MMPs in the growth plate, and especially to avoid physiological loads becoming detrimental.

Cite this article: Bone Joint J 2013;95-B:568–73.

Behaviour of human physeal chondro-progenitorcells in early growth plate injury response in vitro

PURPOSE

The aim of this study was to investigate the proliferation and differentiation behaviour of a defined cell population gained from the human growth plate, namely, chondro-progenitorcells (CPCs), in the initial inflammatory phase of growth plate injury response in vitro.

METHODS

Growth plate cells were sorted via FACS and differentiated along adipogenic and osteogenic lineage to confirm their progenitor features. To mimic the inflammatory phase of injury response at the growth plate they were treated with IL-1β and exposed to cyclic mechanical loading. A BrdU assay was used to investigate CPC proliferation. CPC differentiation behaviour was analysed by RT-PCR.

RESULTS

CPCs (CD45-, CD34-, CD73+, CD90+, and CD105+) showed a successful differentiation along adipogenic and osteogenic lineage. Under conditions simulating the inflammatory phase of injury response at the growth plate in vitro CPCs differentiated towards hypertrophy while chondrogenesis and ossification were inhibited. Proliferation was not significantly altered.

CONCLUSION

This study showed that CPCs can be isolated from the human growth plate and expanded in vitro. In the first phase of injury response at the growth plate these cells differentiate towards hypertrophy. As longitudinal growth is obtained by chondrocyte proliferation and volume increase during hypertrophy this maturation might be the first step towards post-traumatic growth disorders such as unwanted premature ossification of the growth plate.

Differential limb loading in miniature pigs (Sus scrofa domesticus): a test of chondral modeling theory

Variation in mechanical loading is known to influence chondrogenesis during joint formation. However, the interaction among chondrocyte behavior and variation in activity patterns is incompletely understood, hindering our knowledge of limb ontogeny and function. Here, the role of endurance exercise in the development of articular and physeal cartilage in the humeral head was examined in 14 miniature swine (Sus scrofa domesticus). One group was subjected to graded treadmill running over a period of 17 weeks. A matched sedentary group was confined to individual pens. Hematoxylin and eosin staining was performed for histomorphometry of cartilage zone thickness, chondrocyte count and cell area, with these parameters compared multivariately between exercised and sedentary groups. Comparisons were also made with femora from the same sample, focusing on humerus-femur differences between exercised and sedentary groups, within-cohort comparisons of humerus-femur responses and correlated changes within and across joints. This study shows conflicting support for the chondral modeling theory. The humeral articular cartilage of exercised pigs was thinner than that of sedentary pigs, but their physeal cartilage was thicker. While articular and physeal cartilage demonstrated between-cohort differences, humeral physeal cartilage exhibited load-induced responses of greater magnitude than humeral articular cartilage. Controlling for cohort, the humerus showed increased chondrocyte mitosis and cell area, presumably due to relatively greater loading than the femur. This represents the first known effort to evaluate chondral modeling across multiple joints from the same individuals. Our findings suggest the chondral response to elevated loading is complex, varying within and among joints. This has important implications for understanding joint biomechanics and development.

Spinal facet joint biomechanics and mechanotransduction in normal, injury and degenerative conditions

The facet joint is a crucial anatomic region of the spine owing to its biomechanical role in facilitating articulation of the vertebrae of the spinal column. It is a diarthrodial joint with opposing articular cartilage surfaces that provide a low friction environment and a ligamentous capsule that encloses the joint space. Together with the disc, the bilateral facet joints transfer loads and guide and constrain motions in the spine due to their geometry and mechanical function. Although a great deal of research has focused on defining the biomechanics of the spine and the form and function of the disc, the facet joint has only recently become the focus of experimental, computational and clinical studies. This mechanical behavior ensures the normal health and function of the spine during physiologic loading but can also lead to its dysfunction when the tissues of the facet joint are altered either by injury, degeneration or as a result of surgical modification of the spine. The anatomical, biomechanical and physiological characteristics of the facet joints in the cervical and lumbar spines have become the focus of increased attention recently with the advent of surgical procedures of the spine, such as disc repair and replacement, which may impact facet responses. Accordingly, this review summarizes the relevant anatomy and biomechanics of the facet joint and the individual tissues that comprise it. In order to better understand the physiological implications of tissue loading in all conditions, a review of mechanotransduction pathways in the cartilage, ligament and bone is also presented ranging from the tissue-level scale to cellular modifications. With this context, experimental studies are summarized as they relate to the most common modifications that alter the biomechanics and health of the spine-injury and degeneration. In addition, many computational and finite element models have been developed that enable more-detailed and specific investigations of the facet joint and its tissues than are provided by experimental approaches and also that expand their utility for the field of biomechanics. These are also reviewed to provide a more complete summary of the current knowledge of facet joint mechanics. Overall, the goal of this review is to present a comprehensive review of the breadth and depth of knowledge regarding the mechanical and adaptive responses of the facet joint and its tissues across a variety of relevant size scales.

Modulation of hyaluronan catabolism in chondrocytes by mechanical stimuli

Hyaluronan (HA) is a component of the extracellular matrices of cartilage contributing to the structural and functional integrity. HA metabolism is regulated by both anabolic and catabolic processes; however, a great deal more of the detail has been unknown yet. The purpose of this study was to clarify the effect of excessive mechanical load on the expression and activity of hyaluronidase (HYAL) in chondrocytes with a special reference to the expressions of IL-1beta and tumor necrosis factor (TNF)-alpha. A cyclic tensile load of 22.8% cell elongation, regarded as an excessive mechanical stimulus, was applied to cultured rabbit knee articular chondrocytes. HYAL1, HYAL2, IL-1beta, and TNF-alpha mRNA levels were examined by quantitative real-time PCR analysis. The HYAL activity in culture medium was examined by HA zymography. Both HYAL1 and HYAL2 mRNA levels were upregulated significantly by the loading in cultured chondrocytes. HYAL activity was also enhanced as compared with unloaded controls. The IL-1beta mRNA level was upregulated significantly by the loading, and TNF-alpha mRNA level was slightly upregulated. HYAL1 and HYAL2 mRNA levels were upregulated significantly by IL-1beta treatment, resulting in a slight increase in HYAL activity. These results show that the expression of HYAL1 and HYAL2 in articular chondrocytes is enhanced by excessive mechanical stimuli and affected in part by induction of IL-1beta, leading to HA catabolism in articular cartilage.

Beneficial effects of beta-Ecdysone on the joint, epiphyseal cartilage tissue and trabecular bone in ovariectomized rats

Ecdysteroids are steroids found in invertebrates and plants. In mammals they have protein anabolic effects. We have recently published antiosteoporotic effects of Tinospora cordifolia (TC) extract and the search for the possible active ingredients yielded the presence of beta-Ecdysone (Ecd). Therefore, we investigated the effects of pure Ecd in ovariectomized rats on morphological changes in joint, epiphyseal cartilage and trabecular tissue. Following ovariectomy rats were fed for 1 month with Ecd containing food at a dose of 52.8 mg/day/animal. Positive and negative control animals received 17-beta Estradiol (E(2), 132 microg/day/animal) and soy free (sf) food respectively. At sacrifice, specimens consisting of upper tibiae-lower femurs and knee joint were harvested and processed for histomorphometry. The parameters measured included thickness of the joint cartilage, thickness of the whole epiphyseal growth plate and its three zones. Furthermore, the percentage of trabecular bone in the metaphysis region of tibiae was quantified. Ecd and E(2) induced a significant increase in the thickness of joint cartilage. The whole epiphyseal growth plate and its proliferative and hypertrophic zones were also increased by Ecd whereas E(2) reduced their size. The percentage of trabecular area in the metaphysis of tibia was significantly increased in Ecd and E(2) treated animals. Results provide a plausible explanation for the antiosteoporotic effects of TC. Hence, TC as well as other Ecd producing plants or pure Ecd may be of value in the prevention and treatment of osteoporosis and osteoarthritis which is of increasing importance due to aging and obesity among individuals.

Biomechanical and biochemical characteristics of the mandibular condylar cartilage

The human masticatory system consists of a mandible which is able to move with respect to the skull at its bilateral temporomandibular joint (TMJ) through contractions of the masticatory muscles. Like other synovial joints, the TMJ is loaded mechanically during function. The articular surface of the mandibular condyle is covered with cartilage that is composed mainly of collagen fibers and proteoglycans. This construction results in a viscoelastic response to loading and enables the cartilage to play an important role as a stress absorber during function. To understand its mechanical functions properly, and to assess its limitations, detailed information about the viscoelastic behavior of the mandibular condylar cartilage is required. The purpose of this paper is to review the fundamental concepts of the biomechanical behavior of the mandibular condylar cartilage. This review consists of four parts. Part 1 is a brief introduction of the structure and function of the mandibular condylar cartilage. In Part 2, the biochemical composition of the mandibular condylar cartilage is summarized. Part 3 explores the biomechanical properties of the mandibular condylar cartilage. Finally, Part 4 relates this behavior to the breakdown mechanism of the mandibular condylar cartilage which is associated with the progression of osteoarthritis in the TMJ.

Mechanical stimulus alters conformation of type 1 parathyroid hormone receptor in bone cells

The molecular mechanisms by which bone cells transduce mechanical stimuli into intracellular biochemical responses have yet to be established. There is evidence that mechanical stimulation acts synergistically with parathyroid hormone PTH(1-34) in mediating bone growth. Using picosecond time-resolved fluorescence microscopy and G protein-coupled receptor conformation-sensitive fluorescence resonance energy transfer (FRET), we investigated conformational transitions in parathyroid hormone type 1 receptor (PTH1R). 1) A genetically engineered PTH1R sensor containing an intramolecular FRET pair was constructed that enabled detection of conformational activity of PTH1R in single cells. 2) The nature of ligand-dependent conformational change of PTH1R depends on the type of ligand: stimulation with the PTH(1-34) leads to conformational transitions characterized by decrease in FRET efficiency while NH(2)-terminal truncated ligand PTH(3-34) stimulates conformational transitions characterized by higher FRET efficiencies. 3) Stimulation of murine preosteoblastic cells (MC3T3-E1) with fluid shear stress (FSS) leads to significant changes in conformational equilibrium of the PTH1R in MC3T3-E1 cells, suggesting that mechanical perturbation of the plasma membrane leads to ligand-independent response of the PTH1R. Conformational transitions induced by mechanical stress were characterized by an increase in FRET efficiency, similar to those induced by the NH(2)-terminal truncated ligand PTH(3-34). The response to the FSS stimulation was inhibited in the presence of PTH(1-34) in the flow medium. These results indicate that the FSS can modulate the action of the PTH(1-34) ligand. 4) Plasma membrane fluidization using benzyl alcohol or cholesterol extraction also leads to conformational transitions characterized by increased FRET levels. We therefore suggest that PTH1R is involved in mediating primary mechanochemical signal transduction in MC3T3-E1 cells.