Biodegradation of 4-nitrotoluene with biosurfactant production by Rhodococcus pyridinivorans NT2: metabolic pathway, cell surface properties and toxicological characterization

Glycolipids biosurfactants production using low-cost substrates for environmental remediation: progress, challenges, and future prospects

The production of renewable materials from alternative sources is becoming increasingly important to reduce the detrimental environmental effects of their non-renewable counterparts and natural resources, while making them more economical and sustainable. Chemical surfactants, which are highly toxic and non-biodegradable, are used in a wide range of industrial and environmental applications harming humans, animals, plants, and other entities. Chemical surfactants can be substituted with biosurfactants (BS), which are produced by microorganisms like bacteria, fungi, and yeast. They have excellent emulsifying, foaming, and dispersing properties, as well as excellent biodegradability, lower toxicity, and the ability to remain stable under severe conditions, making them useful for a variety of industrial and environmental applications. Despite these advantages, BS derived from conventional resources and precursors (such as edible oils and carbohydrates) are expensive, limiting large-scale production of BS. In addition, the use of unconventional substrates such as agro-industrial wastes lowers the BS productivity and drives up production costs. However, overcoming the barriers to commercial-scale production is critical to the widespread adoption of these products. Overcoming these challenges would not only promote the use of environmentally friendly surfactants but also contribute to sustainable waste management and reduce dependence on non-renewable resources. This study explores the efficient use of wastes and other low-cost substrates to produce glycolipids BS, identifies efficient substrates for commercial production, and recommends strategies to improve productivity and use BS in environmental remediation.

Metabolic engineering of Escherichia coli for 2,4-dinitrotoluene degradation

2,4-Dinitrotoluene (2,4-DNT) as a common industrial waste has been massively discharged into the environment with industrial wastewater. Due to its refractory degradation, high toxicity, and bioaccumulation, 2,4-DNT pollution has become increasingly serious. Compared with the currently available physical and chemical methods, in situ bioremediation is considered as an economical and environmentally friendly approach to remove toxic compounds from contaminated environment. In this study, we relocated a complete degradation pathway of 2,4-DNT into Escherichia coli to degrade 2,4-DNT completely. Eight genes from Burkholderia sp. strain were re-synthesized by PCR-based two-step DNA synthesis method and introduced into E. coli. Degradation experiments revealed that the transformant was able to degrade 2,4-DNT completely in 12 h when the 2,4-DNT concentration reached 3 mM. The organic acids in the tricarboxylic acid cycle were detected to prove the degradation of 2,4-DNT through the artificial degradation pathway. The results proved that 2,4-DNT could be completely degraded by the engineered bacteria. In this study, the complete degradation pathway of 2,4-DNT was constructed in E. coli for the first time using synthetic biology techniques. This research provides theoretical and experimental bases for the actual treatment of 2,4-DNT, and lays a technical foundation for the bioremediation of organic pollutants.

Biosurfactants as a Novel Additive in Pharmaceutical Formulations: Current Trends and Future Implications

BACKGROUND

Surfactants are an important category of additives that are used widely in most of the formulations as solubilizers, stabilizers, and emulsifiers. Current drug delivery systems comprise of numerous synthetic surfactants (such as Cremophor EL, polysorbate 80, Transcutol-P), which are associated with several side effects though used in many formulations. Therefore, to attenuate the problems associated with conventional surfactants, a new generation of surface-active agents is obtained from the metabolites of fungi, yeast, and bacteria, which are termed as biosurfactants.

OBJECTIVES

In this article, we critically analyze the different types of biosurfactants, their origin along with their chemical and physical properties, advantages, drawbacks, regulatory status, and detailed pharmaceutical applications.

METHODS

243 papers were reviewed and included in this review.

RESULTS

Briefly, Biosurfactants are classified as glycolipids, rhamnolipids, sophorolipids, trehalolipids, surfactin, lipopeptides & lipoproteins, lichenysin, fatty acids, phospholipids, and polymeric biosurfactants. These are amphiphilic biomolecules with lipophilic and hydrophilic ends and are used as drug delivery vehicles (foaming, solubilizer, detergent, and emulsifier) in the pharmaceutical industry. Despite additives, they have some biological activity as well (anti-cancer, anti-viral, anti-microbial, P-gp inhibition, etc.). These biomolecules possess better safety profiles and are biocompatible, biodegradable, and specific at different temperatures.

CONCLUSION

Biosurfactants exhibit good biomedicine and additive properties that can be used in developing novel drug delivery systems. However, more research should be driven due to the lack of comprehensive toxicity testing and high production cost which limits their use.

A Bph-Like Nitroarene Dioxygenase Catalyzes the Conversion of 3-Nitrotoluene to 3-Methylcatechol by Rhodococcus sp. Strain ZWL3NT

All nitroarene dioxygenases reported so far originated from Nag-like naphthalene dioxygenase of Gram-negative strains, belonging to group III of aromatic ring-hydroxylating oxygenases (RHOs). Gram-positive Rhodococcus sp. strain ZWL3NT utilizes 3-nitrotoluene (3NT) as the sole source of carbon, nitrogen, and energy for growth. It was also reported that 3NT degradation was constitutive and the intermediate was 3-methylcatechol. In this study, a gene cluster (bndA1A2A3A4) encoding a multicomponent dioxygenase, belonging to group IV of RHOs, was identified. Recombinant Rhodococcus imtechensis RKJ300 carrying bndA1A2A3A4 exhibited 3NT dioxygenase activity, converting 3NT into 3-methylcatechol exclusively, with nitrite release. The identity of the product 3-methylcatechol was confirmed using liquid chromatography-mass spectrometry. A time course of biotransformation showed that the 3NT consumption was almost equal to the 3-methylcatechol accumulation, indicating a stoichiometry conversion of 3NT to 3-methylcatechol. Unlike reported Nag-like dioxygenases transforming 3NT into 4-methylcatechol or both 4-methylcatechol and 3-methylcatechol, this Bph-like dioxygenase (dioxygenases homologous to the biphenyl dioxygenase from Rhodococcus sp. strain RHA1) converts 3NT to 3-methylcatechol without forming 4-methylcatechol. Furthermore, whole-cell biotransformation of strain RKJ300 with bndA1A2A3A4 and strain ZWL3NT exhibited the extended and same substrate specificity against a number of nitrobenzene or substituted nitrobenzenes, suggesting that BndA1A2A3A4 is likely the native form of 3NT dioxygenase in strain ZWL3NT.IMPORTANCE Nitroarenes are synthetic molecules widely used in the chemical industry. Microbial degradation of nitroarenes has attracted extensive attention, not only because this class of xenobiotic compounds is recalcitrant in the environment but also because the microbiologists working in this field are curious about the evolutionary origin and process of the nitroarene dioxygenases catalyzing the initial reaction in the catabolism. In contrast to previously reported nitroarene dioxygenases from Gram-negative strains, which originated from a Nag-like naphthalene dioxygenase, the 3-nitrotoluene (3NT) dioxygenase in this study is from a Gram-positive strain and is an example of a Bph-like nitroarene dioxygenase. The preference of hydroxylation of this enzyme at the 2,3 positions of the benzene ring to produce 3-methylcatechol exclusively from 3NT is also a unique property among the studied nitroarene dioxygenases. These findings will enrich our understanding of the diversity and origin of nitroarene dioxygenase in microorganisms.

Three chlorotoluene-degrading bacterial strains: Differences in biodegradation potential and cell surface properties

Pollution of the environment with chlorinated aromatic compounds is a problem of increasing importance, which has stimulated the search for efficient methods for the remediation of contaminated soil and water. Additionally, for better understanding of the significance of bioavailability to biodegradation, investigation of the cell surface properties is necessary. Hence, this study concerns the properties and possible application, in chlorotoluene removal, of three newly isolated environmental bacterial strains from the genera Pseudomonas, Raoultella and Rahnella. The results show the differences in the biochemical profiles of the isolated strains, their cellular fatty acid composition and their hemolytic properties. However, all three strains exhibit high biodegradation potential, degrading not less than 60% of each monochlorotoluene isomer in 21-day experiments. What is more, observations of changes in the cell surface properties indicate the possible adaptation mechanisms of the strains that enable efficient biodegradation of hydrophobic pollutants such as monochlorotoluenes.

Rhamnolipid from a Lysinibacillus sphaericus strain IITR51 and its potential application for dissolution of hydrophobic pesticides

Rhamnolipid produced from a Lysinibacillus sphaericus IITR51 was characterized and its ability for dissolution of hydrophobic pesticides were evaluated. L. sphaericus produced 1.6 g/L of an anionic biosurfactant that reduced surface tension from 72 N/m to 52 N/m with 48% emulsification index. The biosurfactant was found stable over a wide range of pH (4.0-10.0), temperature (4-100 °C), salt concentration (2-14%) and was identified as rhamnolipid. At the concentration of 90 mg/L rhamnolipid showed enhanced dissolution of α-, β-endosulfan, and γ-hexachlorocyclohexane up to 7.2, 2.9, and 1.8 folds, respectively. The bacterium utilized benzoic acid, chlorobenzene, 3- and 4-chlorobenzoic acid as sole source of carbon and was found resistant to arsenic, lead and cadmium. Furthermore, the isolated biosurfactant showed antimicrobial activities against different pathogenic bacteria. The results obtained indicate the usefulness of rhamnolipid for enhanced dissolution and thereby increasing the bioavailability.

Biosurfactants in cosmetic formulations: trends and challenges

Cosmetic products play an essential role in everyone's life. People everyday use a large variety of cosmetic products such as soap, shampoo, toothpaste, deodorant, skin care, perfume, make-up, among others. The cosmetic industry encompasses several environmental, social and economic impacts that are being addressed through the search for more efficient manufacturing techniques, the reduction of waste and emissions and the promotion of personal hygiene, contributing to an improvement of public health and at the same time providing employment opportunities. The current trend among consumers is the pursuit for natural ingredients in cosmetic products, as many of these products exhibit equal, better or additional benefits in comparison with the chemical-based products. In this sense, biosurfactants are natural compounds with great potential in the formulation of cosmetic products given by their biodegradability and impact in health. Indeed, many of these biosurfactants could exhibit a "prebiotic" character. This review covers the current state-of-the-art of biosurfactant research for cosmetic purposes and further discusses the future challenges for cosmetic applications.

Statistical modeling and optimization of culture conditions by response surface methodology for 2,4- and 2,6-dinitrotoluene biodegradation using Rhodococcus pyridinivorans NT2

To improve biodegradability (% biodegradation) and specific growth rate of Rhodococcus pyridinivorans NT2, culture medium and environmental parameters were screened and optimized using the statistical design techniques of Plackett-Burman and response surface methodology. Of the process variables screened, DNTs (2,4-DNT and 2,6-DNT), MgSO₄·7H₂O, temperature and inoculum size (O.D.) were selected as the most important (P value <0.05) factors. In multiresponse analysis of central composite design, medium formulation consisting of 474/470 mg l^-1 2,4-DNT/2,6-DNT, 0.11 g l^-1 MgSO₄·7H₂O, 37.5 °C temperature and 1.05 OD inoculum size were found to predict maximum % degradation and specific growth rate of 97.55 % and 0.19 h^-1, respectively. The validity of the optimized variables was verified in shake flasks. The optimized media significantly shortened the time required for biodegradation of DNTs while providing a nearly 30 % (for 2,4-DNT) and 70 % (for 2,6-DNT) increased biodegradation along with 5.64-fold increase in specific growth rate for both DNTs.

Current status in biotechnological production and applications of glycolipid biosurfactants

Biosurfactants are natural compounds with surface activity and emulsifying properties produced by several types of microorganisms and have been considered an interesting alternative to synthetic surfactants. Glycolipids are promising biosurfactants, due to low toxicity, biodegradability, and chemical stability in different conditions and also because they have many biological activities, allowing wide applications in different fields. In this review, we addressed general information about families of glycolipids, rhamnolipids, sophorolipids, mannosylerythritol lipids, and trehalose lipids, describing their chemical and surface characteristics, recent studies using alternative substrates, and new strategies to improve of production, beyond their specificities. We focus in providing recent developments and trends in biotechnological process and medical and industrial applications.

Simultaneous Biodegradation of Phenol and n-Hexadecane by Cryogel Immobilized Biosurfactant Producing Strain Rhodococcus wratislawiensis BN38

The capability of the biosurfactant-producing strain Rhodococcus wratislawiensis BN38 to mineralize both aromatic and aliphatic xenobiotics was proved. During semicontinuous cultivation 11 g/l phenol was completely degraded within 22 cycles by Rhodococcus free cells. Immobilization in a cryogel matrix was performed for the first time to enhance the biodegradation at multiple use. A stable simultaneous hydrocarbon biodegradation was achieved until the total depletion of 20 g/l phenol and 20 g/l n-hexadecane (40 cycles). The alkanotrophic strain R. wratislawiensis BN38 preferably degraded hexadecane rather than phenol. SEM revealed well preserved cells entrapped in the heterogeneous super-macroporous structure of the cryogel which allowed unhindered mass transfer of xenobiotics. The immobilized strain can be used in real conditions for the treatment of contaminated industrial waste water.

Lipopeptide biosurfactant from Bacillus clausii BS02 using sunflower oil soapstock: evaluation of high throughput screening methods, production, purification, characterization and its insecticidal activity

Production, purification and characterization of a lipopeptide biosurfactant (surfactin) fromBacillus clausiiBS02 for biocontrol activity against pulse beetles and mealybugs.

Review of advances in the thin layer chromatography of pesticides: 2012-2014

Publications reporting techniques and applications of thin layer chromatography (planar chromatography) for the separation, detection, qualitative, and quantitative determination, and preparative isolation of pesticides and their metabolites are reviewed for the period from November 1, 2012 to November 1, 2014. Analyses are described for a variety of sample types and pesticide classes. In addition to references on residue analysis, studies such as pesticide structure - retention relationships, identification and characterization of natural and synthesized pesticides, metabolism, bioactivity, degradation, soil mobility, and lipophilicity are covered.

Biodegradation of 2,4-dinitrotoluene with Rhodococcus pyridinivorans NT2: characteristics, kinetic modeling, physiological responses and metabolic pathway

Physiological responses ofRhodococcus pyridinivoransNT2 and elucidation of metabolic intermediates formed during biodegradation of 2,4-DNT.

Hydrocarbon degradation by a newly isolated thermophilic Anoxybacillus sp. with bioemulsifier production and new alkB genes

In this work, a new thermophilic bacterial strain was isolated and identified asAnoxybacillussp. WJ-4. This strain of WJ-4 can degrade a wide range of hydrocarbons, and production of an oligosaccharide–lipid–peptide bioemulsifier was detected.

Extracellular biosynthesis of zinc oxide nanoparticles using Rhodococcus pyridinivorans NT2: multifunctional textile finishing, biosafety evaluation and in vitro drug delivery in colon carcinoma

In this study, zinc oxide (ZnO) nanoparticles (NPs) were rapidly synthesized from zinc sulfate solution at room temperature using a metabolically versatile actinobacteria Rhodococcus pyridinivorans NT2. The morphology, structure and stability of the synthesized ZnO NPs were studied using UV-visible absorption spectroscopy, X-ray Diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) with energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), Zeta potential, and thermogravimetry. The data indicated that the synthesized nanoparticles were moderately stable, hexagonal phase, roughly spherical with average particle diameter in the range of 100-120 nm. Results obtained on examination of protein expression revealed that cell enzymes and extracellular protein systems of Rhodococcus sp. may take part in synthesis process. Furthermore, the ZnO NPs were coated onto textile fabrics to enhance UV-blocking, self-cleaning and antibacterial properties. Ultraviolet protecting factor (UPF) indicating UV-blocking properties of ZnO NPs coated textile fabrics were determined as 65, 88, 121, 172 and 241 for 1, 2, 3, 4 and 5 gm(-2) of ZnO NPs, respectively. Besides, self-cleaning activity was assessed by investigating photocatalytic activity on malachite green as well as antibacterial activity against aerobic Gram-positive Staphylococcus epidermidis NCIM 2493 (ATCC 12228). The antibacterial effects of these textiles were evaluated using ISO 20743 standard. In addition, ZnO NPs exhibited a preferential ability to kill HT-29 cancerous cells as compared with normal peripheral blood mononuclear cells (PBMCs).