Precipitation of Silver-Thiosulfate Complex and Immobilization of Silver by Cupriavidus metallidurans CH34

Neutralization of Industrial Alkali-Contaminated Soil by Different Agents: Effects and Environmental Impact

Industrial soil is susceptible to acid or alkali pollution, but studies focused on the remediation of such soil are still limited. This manuscript investigated the neutralization effect of five agents (hydrochloric acid, citric acid, ferrous sulfate, calcium superphosphate and raw gypsum) to alkali polluted soil. The results showed that regarding the initial pH after the neutralizing agent addition, it was better to set it lower than the target, as the pH would rebound. None of the five agents caused an obvious increase in the heavy metal contents of the leachates, but they all caused an increase in electrical conductivity, which indicated an increase in soil salinity. The leachates showed a luminous gain to Vibrio fischeri. However, remediation with hydrochloric acid would cause significant inhibition of germination and root elongation of pakchoi. In addition, the addition of neutralizing agents reshaped the soil microbial community structure in different patterns. Soils treated with hydrochloric acid and ferrous sulfate seemed to improve the microbial richness. The neutralization might be favorable for the biodegradation of polycyclic aromatic hydrocarbons (PAHs), which usually coexist in industrial contaminated soil. In general, the neutralization of alkaline industrial soils using ferrous sulfate, superphosphate and gypsum brought minimal environmental risk, among which ferrous sulfate was the first recommendation in industrial soil after a comprehensive comparison.

Biochemical synthesis of palladium nanoparticles: The influence of chemical fixatives used in electron microscopy on nanoparticle formation and catalytic performance

Palladium nanoparticles (PdNPs) can catalyse a range of reductive chemical reactions transforming both organic and inorganic environmental pollutants. PdNPs that ranged from <2 to 2-40 nm were synthesized using chemical methods, and bacterial biomass with/without chemical fixatives. PdNP formation was enhanced by adsorption of Pd(II) to bacterial biomass, followed by fixation with formate or glutaraldehyde. TEM-SAED analyses confirmed that the cell associated PdNPs were polycrystalline with a face-centered cubic structure. Chemically formed PdNPs possessed a higher Pd(0):Pd(II) ratio and produced structurally similar nanoparticles as the biotic systems. These PdNPs were employed to catalyze two, reductive chemical reactions, transforming 4-nitrophenol (4-NP) and hexavalent chromium [Cr(VI)], into 4-aminophenol and Cr(IV), respectively. In the reduction of 4-NP, the catalytic performance was directly proportional to PdNP surface area, i.e., the smallest PdNPs in formate-PdCH34 cells had the fastest rate of reaction. The mass of Pd(0) as PdNPs was the main contributor to Cr(VI) reduction; the chemically synthesized PdNPs showed the highest removal efficiency with 96% at 20 min. The use of glutaraldehyde enhanced the reduction of Pd(II) and promoted PdNPs formation, i.e., creating an artefact of fixation; however, this treatment also enhanced the catalytic performance of these PdNPs.

Insights into the production of extracellular polymeric substances of Cupriavidus pauculus 1490 under the stimulation of heavy metal ions

Three different methods (a sulfuric acid method, sodium chloride method and vibration method) were used to extract extracellular polymeric substances (EPS) from Cupriavidus pauculus 1490 (C. pauculus 1490) in the present study. The sodium chloride method was able to extract the maximum amount of EPS (86.15 ± 1.50 mg g⁻¹-DW), and could ensure minimum cell lysis by detecting glucose-6-phosphate dehydrogenase activity and using scanning electron microscopy. This method was therefore selected as the optimal extraction method and used in subsequent experiments. On this basis, the tolerance of C. pauculus 1490 and variations in EPS secretion after the addition of different metal ions was investigated. The tolerance levels of C. pauculus 1490 to Cd(ii), Ni(ii), Cu(ii) and Co(ii) were 300 mg L⁻¹, 400 mg L⁻¹, 400 mg L⁻¹ and 400 mg L⁻¹, respectively. Low concentrations of these heavy metal ions could promote bacterial growth, while increased concentrations were found to inhibit it. The results show that metal ions, especially Cd(ii), stimulate the secretion of EPS, with an EPS yield reaching 956.12 ± 10.59 mg g⁻¹-DW at 100 mg L⁻¹. Real-time polymerase chain reaction (PCR) analysis showed that the key EPS synthetic genes, epsB, epsP and Wzz, were up-regulated. Fourier transform infrared spectroscopy analysis suggested that abundant functional groups in EPS play an important role in heavy metal ion complexation. These results will contribute to our understanding of the tolerance mechanism of microorganisms in the presence of different types and concentrations of metal ions.

Metal ions are shown to stimulate the secretion of EPS components of Cupriavidus pauculus 1490, especially Cd(II).

Alleviation of cadmium toxicity to tobacco (Nicotiana tabacum) by biofertilizers involves the changes of soil aggregates and bacterial communities

Tobacco leaves usually accumulate and concentrate high levels of cadmium (Cd) when growing in contaminated soil, and the transfer of Cd through tobacco smoke to human body could cause serious health risks. In this study, we explored the impact of biofertilizers on alleviating Cd-induced growth inhibition of tobacco leaves. Tobacco (Nicotiana tabacum L.) was planted in three naturally Cd-polluted soils from Chinese main tobacco-planting areas. Adding biofertilizer alleviated Cd-induced degradation of tobacco leaves quality, represented by the balanced K, Cl, N, nicotine or sugar contents and their ratios; Cd reduction rate of tobacco leaves was increased and soil extractable Cd was decreased, when compared with CK (no extra biofertilizer addition). The following changing tendencies were believed to be responsible for immobilizing soil Cd and alleviating its toxicity to tobacco leaves: the re-distribution of Cd from the fraction of smaller soil aggregates to the fraction of larger soil aggregates; and the shift of major soil microbes by increasing the abundance of beneficial taxa such as those from the phyla Actinobacteria, Proteobacteria or Chloroflexi. In all biofertilizer treatments, the effectiveness in mitigating Cd toxicity to tobacco leaves was dependent on the type of biofertilizer and soil applied. This study provides a feasible way to control or reduce Cd toxicity for sustainable tobacco production.

Surface sorption and nanoparticle production as a silver detoxification mechanism of the freshwater alga Parachlorella kessleri

SEM, EDS, TEM, FTIR and UV-vis analysis were used to investigate the biosorption, bioaccumulation and bioreduction of silver by the freshwater green alga Parachlorella kessleri. The dead algal biomass showed high potential for silver removal; 75% of silver was removed within 2min. Surface sorption was the main mechanism; bioreduction contributed to the biosorption only to a small extent. In the presence of living P. kessleri cells a 68% decrease of silver concentration was observed within 24h, but subsequently the majority of silver was released back into the solution within the next 14days. According to UV-vis spectrometry, silver nanoparticles were formed in that time. The nanoparticles produced by the alga exhibited a lower toxicity against algal cells than silver ions at the same silver concentrations. The study demonstrated that living algal cells used a combination of two main mechanisms (sorption and reduction) for silver detoxification in their environment.

The synergism of temperature, pH and growth phases on heavy metal biosorption by two environmental isolates

In real environmental applications, such as heavy metal bioremediation, microorganisms are generally not kept at their optimum growth conditions; therefore, it is imperative to investigate their heavy metal removal performance under diverse environmental conditions. The present study aims to investigate the effects of pH, temperature and growth phases on the removal of Cu(2+) and Cr(6+) by two environmental isolates identified as Ochrobactrum intermedium LBr and Cupriavidus metallidurans CH34. Results showed that cells in logarithmic phase presented better biosorption capacity than cells in stationary phase for both isolates. The Cr(6+) metal was removed more efficiently by live O. intermedium LBr than dead cells; while dead C. metallidurans CH34 biosorbed better than live ones. It was also found that the pH and temperature affected the biosorption capacity. The optimum temperatures were determined to be 37°C and 27°C, and the optimum pH values were 6 and 7 for O. intermedium LBr and C. metallidurans CH34, respectively. Additionally, both microorganisms preferentially adsorbed Cu(2+) in Cu(2+)/Cr(6+) mixtures. The main mechanism of adsorption was determined to be through carboxylic, hydroxyl, and amino functional groups.

Current production in a microbial fuel cell using a pure culture of Cupriavidus basilensis growing in acetate or phenol as a carbon source

A microbial fuel cell (MFC) was operated with a pure culture of Cupriavidus basilensis bacterial cells growing in the anode compartment in a defined medium containing acetate or phenol. Operating this mediator-less MFC under a constant external resistor of 1 kΩ with acetate or phenol led to current generation of 902 and 310 mA m⁻² respectively. In the MFC which was operated using acetate or phenol, the current density measured from the plankton bacterial cells with a fresh electrode was 125 and 109 mA m⁻², respectively, whereas the current obtained with biofilm-covered electrodes in sterile medium was 541 and 228 mA m⁻² respectively. After 72 h in the MFC, 86% of the initial phenol concentration was removed, while only 64% was removed after the same time in the control MFC which was held at an open circuit potential (OCP). Furthermore, SEM and confocal microscopy analyses demonstrated a developed biofilm with a live C. basilensis population. In conclusion, in this study we demonstrated, for the first time, use of C. basilensis facultative aerobe bacterial cells in a MFC using acetate or phenol as the sole carbon source which led to electricity generation.

Synthetic phytochelatin surface display in Cupriavidus metallidurans CH34 for enhanced metals bioremediation

This work describes the effects of the cell surface display of a synthetic phytochelatin in the highly metal tolerant bacterium Cupriavidus metallidurans CH34. The EC20sp synthetic phytochelatin gene was fused between the coding sequences of the signal peptide (SS) and of the autotransporter β-domain of the Neisseria gonorrhoeae IgA protease precursor (IgAβ), which successfully targeted the hybrid protein toward the C. metallidurans outer membrane. The expression of the SS-EC20sp-IgAβ gene fusion was driven by a modified version of the Bacillus subtilis mrgA promoter showing high level basal gene expression that is further enhanced by metal presence in C. metallidurans. The recombinant strain showed increased ability to immobilize Pb(2+), Zn(2+), Cu(2+), Cd(2+), Mn(2+), and Ni(2+) ions from the external medium when compared to the control strain. To ensure plasmid stability and biological containment, the MOB region of the plasmid was replaced by the E. coli hok/sok coding sequence.

Bacterial communities associated with a mineral weathering profile at a sulphidic mine tailings dump in arid Western Australia

We investigated bacterial community assemblages and functions down a hill slope contaminated by tailings from a volcanogenic massive sulphide mine in arid Western Australia. Weathering of waste rock, high in S and Fe, had resulted in a varying elemental dispersal down a face of the tailings hill. Bacterial community assemblage, characterised by PCR-DGGE fingerprinting, was significantly associated with electrical conductivity (E.C.) (ρ = 0.664; P < 0.01). Analysis of mobile salts showed that E.C. values were driven by ionic S, Zn, Cl and Al. The bacterial community assemblage was directly characterised across an E.C. gradient using an oligonucleotide microarray (PhyloChip). The dominant taxa at the site were Proteobacteria, Actinobacteria and Firmicutes; however, 37 phyla were detected. The most responsive taxa to variation in E.C. was Acidobacteria (negative correlation). Patterns of heterotrophic processes (BioLog analysis) were also best explained by variation in E.C. (ρ = 0.53; P < 0.01), showing a link between primary mineral weathering by lithotrophic bacteria and abiotic processes, and secondary biogeochemical processes by heterotrophic taxa. These data significantly broaden our knowledge of the bacteria present in metallomorphic ecosystems, establish that mobile phase elements are key drivers of community structure, and that primary biogeochemical cycling is directly influencing other geochemical interactions in the samples.

Contributions of five secondary metal uptake systems to metal homeostasis of Cupriavidus metallidurans CH34

Cupriavidus metallidurans is adapted to high concentrations of transition metal cations and is a model system for studying metal homeostasis in difficult environments. The elemental composition of C. metallidurans cells cultivated under various conditions was determined, revealing the ability of the bacterium to shield homeostasis of one essential metal from the toxic action of another. The contribution of metal uptake systems to this ability was studied. C. metallidurans contains three CorA members of the metal inorganic transport (MIT) protein family of putative magnesium uptake systems, ZupT of the ZRT/IRT protein, or ZIP, family, and PitA, which imports metal phosphate complexes. Expression of the genes for all these transporters was regulated by zinc availability, as shown by reporter gene fusions. While expression of zupT was upregulated under conditions of zinc starvation, expression of the other genes was downregulated at high zinc concentrations. Only corA(1) expression was influenced by magnesium starvation. Deletion mutants were constructed to characterize the contribution of each system to transition metal import. This identified ZupT as the main zinc uptake system under conditions of low zinc availability, CorA(1) as the main secondary magnesium uptake system, and CorA(2) and CorA(3) as backup systems for metal cation import. PitA may function as a cation-phosphate uptake system, the main supplier of divalent metal cations and phosphate in phosphate-rich environments. Thus, metal homeostasis in C. metallidurans is achieved by highly redundant metal uptake systems, which have only minimal cation selectivity and are in combination with efflux systems that "worry later" about surplus cations.

Mechanisms of gold biomineralization in the bacterium Cupriavidus metallidurans

While the role of microorganisms as main drivers of metal mobility and mineral formation under Earth surface conditions is now widely accepted, the formation of secondary gold (Au) is commonly attributed to abiotic processes. Here we report that the biomineralization of Au nanoparticles in the metallophillic bacterium Cupriavidus metallidurans CH34 is the result of Au-regulated gene expression leading to the energy-dependent reductive precipitation of toxic Au(III)-complexes. C. metallidurans, which forms biofilms on Au grains, rapidly accumulates Au(III)-complexes from solution. Bulk and microbeam synchrotron X-ray analyses revealed that cellular Au accumulation is coupled to the formation of Au(I)-S complexes. This process promotes Au toxicity and C. metallidurans reacts by inducing oxidative stress and metal resistances gene clusters (including a Au-specific operon) to promote cellular defense. As a result, Au detoxification is mediated by a combination of efflux, reduction, and possibly methylation of Au-complexes, leading to the formation of Au(I)-C-compounds and nanoparticulate Au(0). Similar particles were observed in bacterial biofilms on Au grains, suggesting that bacteria actively contribute to the formation of Au grains in surface environments. The recognition of specific genetic responses to Au opens the way for the development of bioexploration and bioprocessing tools.

Heavy metal resistant of E. coli isolated from wastewater sites in Assiut City, Egypt

Twelve isolates of E. coli were isolated from wastewater of El-Malah canal located in Assiut, Egypt and were checked for their heavy metal tolerance. One isolate has tested for its multiple metal resistances and found to be plasmid mediated with molecular weights 27 and 65 kb for hexa- and trivalent chromium. It was identified as E. coli ASU 7. Its minimal inhibitory concentration (MIC) for Cu(2+), Co(2+), Ni(2+), Zn(2+), Cr(6+), Cr(3+), Cd(2+) and Pb(2+) were 1.57, 2.55, 1.7, 9.17, 0.48, 7.69, 4.4 and 3.1 mM, respectively. Growth kinetics was determined under Cr(6+) and Cr(3+) stress. SDS-PAGE of protein profile shows that 10 ppm (0.19 mM) of Cr(6+) induces new protein with molecular weight 23 kDa.

Isolation, characterization of heavy metal resistant strain of Pseudomonas aeruginosa isolated from polluted sites in Assiut city, Egypt

Sixty six isolates of Pseudomonas spp. were isolated from wastewater of El-Malah canal located in Assiut, Egypt and were checked for their heavy metal tolerance. One isolate has tested for its multiple metal resistances and found to be plasmid mediated with molecular weight 27 Kb for nickel and lead. It was identified as Pseudomonas aeruginosa ASU 6a. Its minimal inhibitory concentration (MIC) for Cu(2+), Co(2+), Ni(2+), Zn(2+), Cr(3+), Cd(2+)and Pb(2+) were 6.3, 5.9, 6.8, 9.2, 5.8, 4.4, and 3.1 mM, respectively. Growth kinetics and the maximum adsorption capacities were determined under Ni(2+) and Pb(2+) stress. The latter heavy metals induced potassium efflux and were used as indicator for plasma membrane permeabilization.

The bacterial metallome: composition and stability with specific reference to the anaerobic bacterium Desulfovibrio desulfuricans

In bacteria, the intracellular metal content or metallome reflects the metabolic requirements of the cell. When comparing the composition of metals in phytoplankton and bacteria that make up the macronutrients and the trace elements, we have determined that the content of trace elements in both of these microorganisms is markedly similar. The trace metals consisting of transition metals plus zinc are present in a stoichometric molar formula that we have calculated to be as follows: Fe(1)Mn(0.3)Zn(0.26)Cu(0.03)Co(0.03)Mo(0.03). Under conditions of routine cultivation, trace metal homeostasis may be maintained by a series of transporter systems that are energized by the cell. In specific environments where heavy metals are present at toxic levels, some bacteria have developed a detoxification strategy where the metallic ion is reduced outside of the cell. The result of this extracellular metabolism is that the bacterial metallome specific for trace metals is not disrupted. One of the microorganisms that reduces toxic metals outside of the cell is the sulfate-reducing bacterium Desulfovibrio desulfuricans. While D. desulfuricans reduces metals by enzymatic processes involving polyhemic cytochromes c3 and hydrogenases, which are all present inside the cell; we report the presence of chain B cytochrome c nitrite reductase, NrfA, in the outer membrane fraction of D. desulfuricans ATCC 27774 and discuss its activity as a metal reductase.

Biomineralization of Gold: Biofilms on Bacterioform Gold

Bacterial biofilms are associated with secondary gold grains from two sites in Australia. 16S ribosomal DNA clones of the genus Ralstonia that bear 99% similarity to the bacterium Ralstonia metallidurans-shown to precipitate gold from aqueous gold(III) tetrachloride-were present on all DNA-positive gold grains but were not detected in the surrounding soils. These results provide evidence for the bacterial contribution to the authigenic formation of secondary bacterioform gold grains and nuggets.