Numerical analysis of gas and micro-particle interactions in a hand-held shock-tube device

Optimization of a Diaphragm for a Micro-Shock Tube-Based Drug Delivery Method

This paper presents the design optimization of diaphragms for a micro-shock tube-based drug delivery device. The function of the diaphragm is to impart the required velocity and direction to the loosely held drug particles on the diaphragm through van der Waals interaction. The finite element model-based studies involved diaphragms made up of copper, brass and aluminium. The study of the influence of material and geometric parameters serves as a vital tool in optimizing the magnitude and direction of velocity distribution on the diaphragm surface. Experiments carried out using a micro-shock tube validate the final deformed shape of the diaphragms determined from the finite element simulation. The diaphragm yields a maximum velocity of 335 m/s for which the maximum deviation of the velocity vector is 0.62°. Drug particles that travel to the destination target tissue are simulated using the estimated velocity distribution and angular deviation. Further, a theoretical model of penetration helps in the prediction of the drug particle penetration in the skin tissue like a target, which is found to be 0.126 mm. The design and calibration procedure of a micro-shock tube device to alter drug particle penetration considering the skin thickness and property are presented.

CFD MODELING OF HIGH SPEED LIQUID JETS FROM AN AIR-POWERED NEEDLE-FREE INJECTION SYSTEM

A liquid jet injector is a biomedical device intended for drug delivery. Medication is delivered through a fluid stream that penetrates the skin. This small diameter liquid stream is created by a piston forcing a fluid column through a nozzle. These devices can be powered by springs or compressed gas. In this study, a CFD simulation is carried out to investigate the fluid mechanics and performance of needle free injectors powered specifically by compressed air. The motion of the internal mechanisms of the injector which propels a liquid jet through an orifice is simulated by the moving boundary method and the fluid dynamics is modeled using LES/VOF techniques. In this paper, numerical results are discussed by comparing the fluid stagnation pressures of the liquid jet with previously published experimental measurements obtained using a custom-built prototype of the air-powered needle free liquid injector. Performance plots as a function of various injector parameters are presented and explained.

Microneedle assisted micro-particle delivery from gene guns: experiments using skin-mimicking agarose gel

A set of laboratory experiments has been carried out to determine if micro-needles (MNs) can enhance penetration depths of high-speed micro-particles delivered by a type of gene gun. The micro-particles were fired into a model target material, agarose gel, which was prepared to mimic the viscoelastic properties of porcine skin. The agarose gel was chosen as a model target as it can be prepared as a homogeneous and transparent medium with controllable and reproducible properties allowing accurate determination of penetration depths. Insertions of various MNs into gels have been analysed to show that the length of the holes increases with an increase in the agarose concentration. The penetration depths of micro-particle were analysed in relation to a number of variables, namely the operating pressure, the particle size, the size of a mesh used for particle separation and the MN dimensions. The results suggest that the penetration depths increase with an increase of the mesh pore size, because of the passage of large agglomerates. As these particles seem to damage the target surface, then smaller mesh sizes are recommended; here, a mesh with a pore size of 178 μm was used for the majority of the experiments. The operating pressure provides a positive effect on the penetration depth, that is it increases as pressure is increased. Further, as expected, an application of MNs maximises the micro-particle penetration depth. The maximum penetration depth is found to increase as the lengths of the MNs increase, for example it is found to be 1272 ± 42, 1009 ± 49 and 656 ± 85 μm at 4.5 bar pressure for spherical micro-particles of 18 ± 7 μm diameter when we used MNs of 1500, 1200 and 750 μm length, respectively.

Potential of microneedle-assisted micro-particle delivery by gene guns: a review

CONTEXT

Gene guns have been used to deliver deoxyribonucleic acid (DNA) loaded micro-particle and breach the muscle tissue to target cells of interest to achieve gene transfection.

OBJECTIVE

This article aims to discuss the potential of microneedle (MN) assisted micro-particle delivery from gene guns, with a view to reducing tissue damage.

METHODS

Using a range of sources, the main gene guns for micro-particle delivery are reviewed along with the primary features of their technology, e.g. their design configurations, the material selection of the micro-particle, the driving gas type and pressure. Depending on the gene gun system, the achieved penetration depths in the skin are discussed as a function of the gas pressure, the type of the gene gun system and particle size, velocity and density. The concept of MN-assisted micro-particles delivery which consists of three stages (namely, acceleration, separation and decoration stage) is discussed. In this method, solid MNs are inserted into the skin to penetrate the epidermis/dermis layer and create holes for particle injection. Several designs of MN array are discussed and the insertion mechanism is explored, as it determines the feasibility of the MN-based system for particle transfer.

RESULTS

This review suggests that one of the problems of gene guns is that they need high operating pressures, which may result in direct or indirect tissue/cells damage. MNs seem to be a promising method which if combined with the gene guns may reduce the operating pressures for these devices and reduce tissue/cell damages.

CONCLUSIONS

There is sufficient potential for MN-assisted particle delivery systems.

An experimental study of microneedle-assisted microparticle delivery

A set of well-defined experiments has been carried out to explore whether microneedles (MNs) can enhance the penetration depths of microparticles moving at high velocity such as those expected in gene guns for delivery of gene-loaded microparticles into target tissues. These experiments are based on applying solid MNs that are used to reduce the effect of mechanical barrier function of the target so as to allow delivery of microparticles at less imposed pressure as compared with most typical gene guns. Further, a low-cost material, namely, biomedical-grade stainless steel microparticle with size ranging between 1 and 20 μm, has been used in this study. The microparticles are compressed and bound in the form of a cylindrical pellet and mounted on a ground slide, which are then accelerated together by compressed air through a barrel. When the ground slide reaches the end of the barrel, the pellet is separated from the ground slide and is broken down into particle form by a mesh that is placed at the end of the barrel. Subsequently, these particles penetrate into the target. This paper investigates the implications of velocity of the pellet along with various other important factors that affect the particle delivery into the target. Our results suggest that the particle passage increases with an increase in pressure, mesh pore size, and decreases with increase in polyvinylpyrrolidone concentration. Most importantly, it is shown that MNs increase the penetration depths of the particles.

Impact Studies of High-Speed Micro-Particles Following Biolistic Delivery

The powdered injection system is a novel biomedical device for needle-free adminstration of DNA vaccines. One system, call the Venturi device, uses the venturi effect to entrain DNA-coated micron gold particles into an established quasi-steady supersonic helium jet flow and accelerate them into an appropriate momentum in order to penetrate the outer layer of the skin or mucosal tissue to achieve a biological effect. In this paper, computational fluid dynamics is utilized to simulate the complete operation of a prototype Venturi system. The key features of the gas dynamics and gas-particle interactions are presented. In particular, the mechanism for the particle entrainment is explored. The overall capability of the Venturi system to deliver the particles into modelled targets is discussed. The statistical analysis shows that a mean impact velocity of 695 m/s is achieved for representative gold particles (1.8 microm in diameter), with a penetration depth of 29.8 microm for epidermal DNA delivery.

Characteristics of a micro-biolistic system for murine immunological studies

With an advanced computational fluid dynamics (CFD) technique, we have numerically developed and examined a micro-biolistic system for delivering particles to murine target sites. The micro-particles are accelerated by a high speed flow initiated by a traveling shock wave, so that they can attain a sufficient momentum to penetrate in to the cells of interest within murine skin (or mucosa). In immunization application, powdered vaccines are directly delivered into the antigen presenting cells (APCs) within the epidermis/dermis of the murine skin with a narrow and highly controllable velocity range (e.g., 699+/-5.6 m/s for 1.8 microm modeled gold particles) and a uniform spatial distribution over a diameter of approximately 4 mm target area. Key features of gas dynamics and gas-particle interaction are presented. Importantly, the particle impact velocity conditions are quantified as a function of: stand-off distance (2-15 mm), driver gas species (air/helium mixtures), particle density (1,050 kg/m3 and 19,320 kg/m3) and particle size (1-5 microm for gold particles and 10-50 microm for less dense particles, respectively). The influential parameters--representative of immunotherapeutic (e.g., DNA vaccination) and protein (e.g., lidocaine) biolistic applications--are studied in detail.