Fabrication and characterization of hyaluronic acid microneedles to enhance delivery of magnesium ascorbyl phosphate into skin

Enhanced Physical Stability of L-Ascorbic Acid in an Ionic Liquid

Ionic liquid (IL) technology was used to enhance the stability of L-ascorbic acid (AA). Pyridoxine was selected as the counter cation for anionic AA in IL. After AA was dissolved in water at 40 °C, its ratio decreased to 3.2% after 7 d. In contrast, the IL formulation showed negligible degradation, with almost no loss of AA even after 28 d. These results suggest that the use of IL enhances the stability of AA.

Design and fabrication of customizable microneedles enabled by 3D printing for biomedical applications

Microneedles (MNs) is an emerging technology that employs needles ranging from 10 to 1000 μm in height, as a minimally invasive technique for various procedures such as therapeutics, disease monitoring and diagnostics. The commonly used method of fabrication, micromolding, has the advantage of scalability, however, micromolding is unable to achieve rapid customizability in dimensions, geometries and architectures, which are the pivotal factors determining the functionality and efficacy of the MNs. 3D printing offers a promising alternative by enabling MN fabrication with high dimensional accuracy required for precise applications, leading to improved performance. Furthermore, enabled by its customizability and one-step process, there is propitious potential for growth for 3D-printed MNs especially in the field of personalized and on-demand medical devices. This review provides an overview of considerations for the key parameters in designing MNs, an introduction on the various 3D-printing techniques for fabricating this new generation of MNs, as well as highlighting the advancements in biomedical applications facilitated by 3D-printed MNs. Lastly, we offer some insights into the future prospects of 3D-printed MNs, specifically its progress towards translation and entry into market.

Synthesis of nanostructured silica particles for controlled release of ascorbic acid: Microstructure features and In Vitro scratch wound assay

To date, the long term stability of ascorbic acid (AA) under physiological conditions represents a major issue for wound healing and tissue regeneration applications. In this study, ascorbyl phosphate (AP) was loaded into silica nanoparticles (SiNPs) through a simple one-step procedure, in which spherical shaped porous SiNPs were obtained via hydrolysis/condensation of tetraethylorthosilicate (TEOS) in the presence of bicarbonate salt and ammonia. The as-prepared SiNPs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and Fourier Transformer Infrared Spectrophotometer (FTIR). Incorporation of bicarbonate salt resulted in the formation of spherical SiNPs with an average diameter of 460 ± 89 nm, while further increase of bicarbonate salt led to the formation of silica sheet-like structures. The AP-loaded SiNPs exhibited high loading efficiency from 92.3- 81.5%, according to AP content and sustained release over 3 days. According to cell viability assay, the obtained AP-enriched SiNPS showed no toxicity and supportive effect to the proliferation of human skin fibroblast cells (HSF) at a concentration less than 200 μg/mL. Moreover, it was observed that the wound closure percentage (%) after 24 h was also shown to increase to 74.1 ± 3.1% for 20AP-loaded SiNPs compared to control samples (50.1 ± 1.8%). The obtained results clearly demonstrated that the developed SiNPs formulation exhibits optimal microstructure features to maintain a sustained release of AA at wound bed for the healing of skin tissue, including acute and chronic wounds. This article is protected by copyright. All rights reserved.

Microneedle Mediated Iontophoretic Delivery of Tofacitinib Citrate

PURPOSE

To investigate in vitro transdermal delivery of tofacitinib citrate across human skin using microporation by microneedles and iontophoresis alone and in combination.

METHODS

In vitro permeation studies were conducted using vertical Franz diffusion cells. Microneedles composed of polyvinyl alcohol and carboxymethyl cellulose were fabricated and successfully characterized using scanning electron microscopy. The microchannels created were further characterized using histology, dye binding study, scanning electron microscopy, and confocal microscopy studies. The effect of microporation on delivery of tofacitinib citrate was evaluated alone and in combination with iontophoresis. In addition, the effect of current density on iontophoretic delivery was also investigated.

RESULTS

Total delivery of tofacitinib citrate via passive permeation was found out to be 11.04 ± 1 μg/sq.cm. Microporation with microneedles resulted in significant enhancement where a 28-fold increase in delivery of tofacitinib citrate was observed with a total delivery of 314.7±33.32 μg/sq.cm. The characterization studies confirmed the formation of microchannels in the skin where successful disruption of stratum corneum was observed after applying microneedles. Anodal iontophoresis at 0.1 and 0.5 mA/sq.cm showed a total delivery of 18.56 μg/sq.cm and 62.07 μg/sq.cm, respectively. A combination of microneedle and iontophoresis at 0.5 mA/sq.cm showed the highest total delivery of 566.59 μg/sq.cm demonstrating a synergistic effect. A sharp increase in transdermal flux was observed for a combination of microneedles and iontophoresis.

CONCLUSION

This study demonstrates the use of microneedles and iontophoresis to deliver a therapeutic dose of tofacitinib citrate via transdermal route.

Fabrication of Polymeric Microneedles using Novel Vacuum Compression Molding Technique for Transdermal Drug Delivery

PURPOSE

To demonstrate the feasibility of vacuum compression molding as a novel technique for fabricating polymeric poly (D, L-lactic-co-glycolic acid) microneedles.

METHODS

First, polydimethylsiloxane molds were prepared using metal microneedle templates and fixed in the MeltPrep® Vacuum Compression Molding tool. Poly (D, L-lactic-co-glycolic acid) (EXPANSORB® DLG 50-5A) was added, enclosed, and heated at 130°C for 15 min under a vacuum of -15 psi, cooled with compressed air for 15 min, followed by freezing at -20°C for 30 min, and stored in a desiccator. The microneedles and microchannels were characterized by a variety of imaging techniques. In vitro permeation of model drug lidocaine as base and hydrochloride salt was demonstrated across intact and microporated dermatomed human skin.

RESULTS

Fabricated PLGA microneedles were pyramid-shaped, sharp, uniform, and mechanically robust. Scanning electron microscopy, skin integrity, dye-binding, histology, and confocal laser microscopy studies confirmed the microchannel formation. The receptor delivery of lidocaine salt increased significantly in microporated (270.57 ± 3.73 μg/cm²) skin as compared to intact skin (142.19 ± 13.70 μg/cm²) at 24 h. The receptor delivery of lidocaine base from microporated skin was significantly higher (312.37 ± 10.57 μg/cm²) than intact skin (169.68 ± 24.09 μg/cm²) up to 8 h. Lag time decreased significantly for the base (2.24 ± 0.17 h to 0.64 ± 0.05 h) and salt (4.76 ± 0.31 h to 1.47 ± 0.21 h) after microporation.

CONCLUSION

Vacuum compression molding was demonstrated as a novel technique to fabricate uniform, solvent-free, strong polymer microneedles in a short time.

Recent Advances of Hyaluronan for Skin Delivery: From Structure to Fabrication Strategies and Applications

Hyaluronan (HA) plays a fundamental role in maintaining the homeostasis on skin health. Furthermore, the effect of HA in skin inflammatory diseases is worth studying in the next future. HA and its conjugates change the solubility of active pharmaceutical ingredients, improve emulsion properties, prolong stability, reduce immunogenicity, and provide targeting. HA penetrates to deeper layers of the skin via several mechanisms, which depend on the macromolecular structure and composition of the formulation. The cellular and molecular mechanisms involved in epidermal dysfunction and skin aging are not well understood. Nevertheless, HA is known to selectively activate CD44-mediated keratinocyte signaling that regulates its proliferation, migration, and differentiation. The molecular size of HA is critical for molecular mechanisms and interactions with receptors. High molecular weight HA is used in emulsions and low molecular weight is used to form nanostructured lipid carriers, polymeric micelles, bioconjugates, and nanoparticles. In the fabrication of microneedles, HA is combined with other polymers to enhance mechanical properties for piercing the skin. Hence, this review aims to provide an overview of the current state of the art and last reported ways of processing, and applications in skin drug delivery, which will advocate for their broadened use in the future.

Biomaterials and Extracellular Vesicle Delivery: Current Status, Applications and Challenges

In this review, we will discuss the current status of extracellular vesicle (EV) delivery via biopolymeric scaffolds for therapeutic applications and the challenges associated with the development of these functionalized scaffolds. EVs are cell-derived membranous structures and are involved in many physiological processes. Naïve and engineered EVs have much therapeutic potential, but proper delivery systems are required to prevent non-specific and off-target effects. Targeted and site-specific delivery using polymeric scaffolds can address these limitations. EV delivery with scaffolds has shown improvements in tissue remodeling, wound healing, bone healing, immunomodulation, and vascular performance. Thus, EV delivery via biopolymeric scaffolds is becoming an increasingly popular approach to tissue engineering. Although there are many types of natural and synthetic biopolymers, the overarching goal for many tissue engineers is to utilize biopolymers to restore defects and function as well as support host regeneration. Functionalizing biopolymers by incorporating EVs works toward this goal. Throughout this review, we will characterize extracellular vesicles, examine various biopolymers as a vehicle for EV delivery for therapeutic purposes, potential mechanisms by which EVs exert their effects, EV delivery for tissue repair and immunomodulation, and the challenges associated with the use of EVs in scaffolds.

Minoxidil-loaded hyaluronic acid dissolving microneedles to alleviate hair loss in an alopecia animal model

Alopecia is defined as hair loss in a part of the head due to various causes, such as drugs, stress and autoimmune disorders. Various therapeutic agents have been suggested depending on the cause of the condition and patient sex, and age. Minoxidil (MXD) is commonly used topically to treat alopecia, but its low absorption rate limits widespread use. To overcome the low absorption, we suggest microneedles (MNs) as controlled drug delivery systems that release MXD. We used hyaluronic acid (HA) to construct MN, as it is biocompatible and safe. We examined the effect of HA on the hair dermal papilla (HDP) cells that control the development of hair follicles. HA enhanced proliferation, migration, and aggregation of HDP cell by increasing cell-cell adhesion and decreasing cell substratum. These effects were mediated by the cluster of differentiation (CD)-44 and phosphorylation of serine‑threonine kinase (Akt). In chemotherapy-induced alopecia mice, topical application of HA tended to decrease chemotherapy-induced hair loss. Although the amount of MXD administered by HA-MNs was 10% of topical treatment, the MXD-containing HA-MNs (MXD-HA-MNs) showed better effects on the growth of hair than topical application of MXD. In summary, our results demonstrated that HA reduces hair loss in alopecia mice, and that delivery of MXD and HA using MXD-HA-MNs maximizes therapeutic effects and minimize the side effects of MXD for the treatment of alopecia. STATEMENT OF SIGNIFICANCE: (1) Significance, This work reports a new approach for treatment of alopecia using a dissolving microneedle (MN) prepared with hyaluronic acid (HA). The HA provided a better environment for cellular functions in the hair dermal papilla cells. The HA-MNs containing minoxidil (MXD) exhibited a significant reduction of hair loss, although amount of MXD contained in them was only 10% of topically applied MXD., (2) Scientific impact, This is the first report demonstrating the direct anti-alopecia effects of HA administrated in a transdermal route and the feasibility of novel therapeutics using MXD-containing HA-MNs. We believe that our work will excite interdisciplinary readers of Acta Biomaterialia, those who are interested in the natural polymers, drug delivery, and alopecia.

Recent advances in polymer microneedles for drug transdermal delivery: Design strategies and applications

In recent years, the transdermal drug delivery based on microneedles (MNs) technology has received extensive attention, which offers a safer and painless alternative to hypodermic needle injection. They can pierce the stratum corneum and deliver drugs to the epidermis and dermis-structures of skin, showing prominent properties such as minimally invasive, bypassing first-pass metabolism, and self-administered. A range of materials have been used to fabricate MNs, such as silicon, metal, glass, and polymers. Among them, polymer MNs have gained increasing attention from pharmaceutical and cosmetic companies as one of the promising drug delivery methods. Microneedle products have recently become available on the market, and some of them are under evaluation for efficacy and safety. This paper focuses on current state of polymer MNs in the drug transdermal delivery. The materials and methods for the fabrication of polymer MNs and their drug administration are described. The recent progresses of polymer MNs for treatment of cancer, vaccine delivery, blood glucose regulation, androgenetic alopecia, obesity, tissue healing, myocardial infarction and gout are reviewed. The challenges of MNs technology are summarized and the future development trend of MNs is also prospected. This article is protected by copyright. All rights reserved.

Bioimaging of Dissolvable Microneedle Arrays: Challenges and Opportunities

The emergence of microneedle arrays (MNAs) as a novel, simple, and minimally invasive administration approach largely addresses the challenges of traditional drug delivery. In particular, the dissolvable MNAs act as a promising, multifarious, and well-controlled platform for micro-nanotransport in medical research and cosmetic formulation applications. The effective delivery mostly depends on the behavior of the MNAs penetrated into the body, and accurate assessment is urgently needed. Advanced imaging technologies offer high sensitivity and resolution visualization of cross-scale, multidimensional, and multiparameter information, which can be used as an important aid for the evaluation and development of new MNAs. The combination of MNA technology and imaging can generate considerable new knowledge in a cost-effective manner with regards to the pharmacokinetics and bioavailability of active substances for the treatment of various diseases. In addition, noninvasive imaging techniques allow rapid, receptive assessment of transdermal penetration and drug deposition in various tissues, which could greatly facilitate the translation of experimental MNAs into clinical application. Relying on the recent promising development of bioimaging, this review is aimed at summarizing the current status, challenges, and future perspective on in vivo assessment of MNA drug delivery by various imaging technologies.

Hyaluronic acid based microneedle array: Recent applications in drug delivery and cosmetology

Microneedles are micron-sized arrays of needles that facilitate drug delivery for local and systemic effects. Hyaluronic acid (HA) is a glycosaminoglycan and is an indigenous component of the connective tissues and dermis. Owing to its versatility and biocompatibility, it has widely been used against various bone, eye, and skin disorders. Therefore, fabricating HA-microneedles is fetching massive global attention. HA based dissolvable microneedles have been immensely explored due to their biodegradable nature. Its degradation residues are very safe. Several attempts have been made to deliver vitamins, proteins, DNAs, and biological macromolecules by HA-microneedles. Here we present the recent advancements in HA-microneedles based application on drug delivery and cosmetology. Its bio-degradation pathways, the receptors on which HA and its derivatives interact, the biological half-lives, and their importance as useful materials for various applications are highlighted. The literature reports identify HA-microneedle as an useful carrier for the delivery of pharmaceuticals.

Marine polymeric microneedles for transdermal drug delivery

Transdermal drug delivery is considered one of the most attractive routes for administration of pharmaceutic and cosmetic active ingredients due to the numerous advantages, especially over oral and intravenous methodologies. However, some limitations still exist mainly regarding the need to improve the drugs permeation across the skin. For this, several strategies have been described, considering the application of chemical permeation enhancers, drugs' nanoformulations and physical methods. Of these, microneedles have been proposed in the last years as promising strategies to enhance transdermal drug delivery. In this review, different types of microneedles are described, and the most commonly used methods of fabrication systematized, as well as the materials typically used and their main therapeutical applications. A special attention is paid to polymeric microneedles, particularly those made from sustainable marine polysaccharides like chitosan, alginate and hyaluronic acid. The applications of marine based polymeric microneedle devices for transdermal drug delivery are examined in detail and the perspectives of translation from the clinical trials to the market demonstrated.

Biodegradable microneedles fabricated with carbohydrates and proteins: Revolutionary approach for transdermal drug delivery

There has been a surge in the use of transdermal drug delivery systems (TDDS) for the past few years. The market of TDDS is expected to reach USD 7.1 billion by 2023, from USD 5.7 billion in 2018, at a CAGR of 4.5%. Microneedles (MNs) are a novel class of TDDS with advantages of reduced pain, low infection risk, ease of application, controlled release of therapeutic agents, and enhanced bioavailability. Biodegradable MNs fabricated from natural polymers have become the center of attention among formulation scientists because of their recognized biodegradability, biocompatibility, ease of fabrication, and sustainable character. In this review, we summarize the various polysaccharides and polypeptide based biomaterials that are used to fabricate biodegradable MNs. Particular emphasis is given to cellulose and its derivatives, starch, and complex carbohydrate polymers such as alginates, chitosan, chondroitin sulfate, xanthan gum, pullulan, and hyaluronic acid. Additionally, novel protein-based polymers such as zein, collagen, gelatin, fish scale and silk fibroin (polyamino acid) biopolymers application in transdermal drug delivery have also been discussed. The current review will provide a unique perspective to the readers on the developments of biodegradable MNs composed of carbohydrates and protein polymers with their clinical applications and patent status.

Effect of magnesium ascorbyl phosphate on collagen stabilization for wound healing application

Wound healing is a complex process which requires appropriate structural support for restoration of tissue continuity and function. Collagen can act as a template for cellular activities but poor physico-chemical properties necessitates the stabilization of collagen without impairing its structure and function. This study investigates the effect of magnesium ascorbyl phosphate (MAP) on collagen with reference to physico-chemical properties. Incorporation of MAP enhanced the rate of collagen fibrillation signifying increased interaction at reduced time interval. MAP did not induce any changes in the secondary structure of collagen while there was an increase in shear viscosity with increase in shear stress at different shear rate. MAP stabilized collagen film exhibited higher denaturation temperature and showed an increase in Young's Modulus when compared with that of collagen film. In vivo studies showed complete wound closure on day 16 in case of stabilized collagen film. Mechanical properties of healed skin revealed that MAP collagen film treated rat skin completely regained its properties similar to that of normal skin thereby making them a potential candidate for wound healing application.