Formation and characterization of mesoporous silica MCM-48 and polypyrrole composite

Designing an efficient organic-inorganic hybrid nanocomposite for simultaneous oxidative/adsorptive desulfurization of model and real fuel oils

In this study, an efficient organic-inorganic hybrid nanocomposite was designed for deep oxidative/adsorptive removal of dibenzothiophene (DBT) from model and real fuel oils employing surface molecularly imprinted polymer (SMIP) and mesoporous silica nanoparticles (MSNs). On the surface of silanol-functionalized MCM-48-HPW prepared at different 12-tungstophosphoric acid (HPW wt%) as the oxidation catalyst, an imprinted polymethacrylic acid polymer (PMAA) as a selective adsorbent of DBT was formed using different amounts of DBT template. Then, various oxidant/sulfur molar ratios were applied during the desulfurization reactions according to the central composite design (CCD). The successful synthesis of the optimum SMIP-PMAA@MCM-48-HPW nanocomposite was confirmed by FTIR, XRD, N2-adsorption, SEM, TEM, TGA, and NMR techniques. The desulfurization percentage of the model oil reached 98.54% under the optimum conditions, and the catalyst percentage was found to be the most significant parameter for desulfurization efficiency. Comparison experiments showed that the combined role of oxidation and adsorption had an extensive impact on desulfurization efficiency. Under the optimized conditions, 96% DBT from gasoline was removed by the optimum nanocomposite. The optimum nanocomposite showed good stability and could be reused five times without a remarkable decrease in the desulfurization ability.

Microfluidic assembly of pomegranate-like hierarchical microspheres for efflux regulation in oral drug delivery

Herein, a multi-functional nano-in-micro hierarchical microsphere system is demonstrated for controlling the intestinal efflux pumps that affect the oral bioavailability of many therapeutic drugs. The hierarchical particles were generated by a co-flow microfluidic device and consisted of porous silica nanoparticles packed in Eudragit® polymeric matrix. Meropenem (MER), a last-resort antibacterial drug, was loaded into porous silica (MCM-48) with a loading capacity of 34.3 wt%. In this unique materials combination, MCM-48 enables ultrahigh loading of a hydrophilic MER, while the Eudragit® polymers not only protect MER from gastric pH but also act as an antagonist for p-glycoprotein protein efflux pumps to reduce the efflux of MER back into the gastrointestinal lumen. We investigated the in-vitro temporal MER release and bidirectional (absorptive and secretory) drug permeation model across the Caco-2 monolayer. The bioavailability of MER was significantly improved by all of the prepared formulations (i.e. increased absorptive transport and reduced secretory transport). The Eudragit® RSPO formulated MER-MCM showed the best performance with an efflux ratio (i.e. secretory transport/absorptive transport) of 0.35, which is 7.4 folds less than pure MER (2.62). Lastly, the prepared formulations were able to retain the antibacterial activity of MER against Staphylococcus aureus and Pseudomonas aeruginosa. STATEMENT OF SIGNIFICANCE: Meropenem (MER) is a last resort antibiotic used for the treatment of drug-resistant and acute infections and only available as intravenous injectable dosage due to its poor chemical and thermal stability, and ultra-poor oral bioavailability because of the efflux action of P-glycoprotein (P-gp) pumps. Multifunctional colloidal micro/nanoparticles can help to solve these issues. Herein, we designed pomegranate-like hierarchical microspheres comprised of porous silica nanoparticles and enteric Eudragit® polymers (Eudragit®S100, Eudragit®RSPO, and Eudragit®RS100) using a co-flow microfluidic device. Our formulations allow for ultrahigh loading of hydrophilic MER, protects MER from gastric pH, and also block P-gp efflux pumps for enhanced MER permeation/retention with Eudragit®RSPO - showing 13.9-folds higher permeation and 7.4-folds reduction in efflux ratio in a bi-directional Caco-2 monolayer culture system.

Transparent Hydrophobic Hybrid Silica Films by Green and Chemical Surfactants

Monodispersed and transparent hybrid silica wires were synthesized by the sol-gel method using the chemical surfactant trimethoxyoctylsilane (C8TMOS or C11H26O3Si) and, for the first time, by green surfactants (Nelumbo nucifera/lotus leaf extract). The purpose was to introduce a less toxic, cost-effective, and one-step easy approach to get superhydrophobic silica films. Each of the surfactants was used at two different concentrations to investigate hydrophobicity of the films. Assembly of silica wires was obtained by dip-coating and vacuum filtration methods on glass and cellulose acetate filter paper as substrates, respectively. The water contact angle (CA) up to 154° was measured for hybrid silica films on filter paper, which revealed their superhydrophobicity as compared to hydrophobic behavior of those films coated on a glass substrate with CA up to 135°. Chemical, optical, and structural properties of prepared films were characterized by Fourier transform infrared spectroscopy, UV-vis spectroscopy, scanning electron microscopy, thermogravimetry, and differential scanning calorimetry. The hybrid silica wires prepared displayed good transparency, low surface energy, and superhydrophobicity. These silica assemblies can create outstanding and multifunctional structures with superhydrophobic coatings for waterproof electronic devices, military uniforms, self-cleaning surfaces, etc.

Electrochemical Detection of Dopamine at a Gold Electrode Modified with a Polypyrrole⁻Mesoporous Silica Molecular Sieves (MCM-48) Film

A gold electrode modified with a polypyrrole–mesoporous silica molecular sieves (polypyrrole—MCM-48) nanostructure film was used for the electrochemical determination of small concentrations of dopamine (DA) by cyclic voltammetry and square-wave voltammetry techniques. This electrode showed good electrocatalytic activity for the oxidation of dopamine. The oxidation potential of dopamine was decreased significantly compared with that obtained at the bare gold electrode. The observed linear range for the determination of the dopamine concentration, without interferents through cyclic voltammetry measurements, was from 10 μM to 1.2 mM (R² = 0.9989) for the gold electrode modified with the polypyrrole—MCM-48 nanostructure, with a detection limit of 2.5 μM. In the case of square-wave voltammetry, the linear range was 2–250 μM, with a correlation coefficient of 0.9996, and the detection limit was estimated to be 0.7 μM. The effects of interferents, such as ascorbic acid (AA) and uric acid (UA), on the electrochemical detection of dopamine were also examined. The modified electrode can successfully separate the oxidation potentials for ascorbic acid and dopamine, shifting the oxidation peak potential of ascorbic acid to a more positive potential, and significantly decreasing the peak current. The presence of ascorbic acid increased the sensitivity of dopamine determination at the modified electrode, and the detection limit was estimated to be 0.5 μM with 0.1 mM ascorbic acid to imitate physiological solutions. Additionally, studies showed that the presence of uric acid does not affect the electrochemical detection of dopamine. The modified electrode can be successfully applied for the quantitative analysis of dopamine both with and without interferents.

Efficient and reusable SBA-15-immobilized Brønsted acidic ionic liquid for the ketalization of cyclohexanone with glycol

Molecular sieve SBA-15 immobilized Brønsted acidic ionic liquid: an efficient and recyclable catalyst for the ketalization of cyclohexanone with glycol.