Environmental and human health risk evaluation of heavy metals in ceramsites from municipal solid waste incineration fly ash

Solidification/stabilization pre-treatment coupled with landfill disposal of heavy metals in MSWI fly ash in China: A systematic review

The growth in municipal solid waste incineration (MSWI) has resulted in a substantial rise in the production of fly ash in China. It is anticipated that during the "14th Five-Year Plan", the accumulated amount of fly ash stocked and disposed of at landfills will surpass 100 million tons. With the development of the economy and the implementation of garbage classification relevant policies, the pollution characteristics of heavy metal change in spatiotemporal distribution. Solidification/stabilization (S/S) pre-treatment coupled with landfill disposal is the mainstream method for fly ash. This study provides a systematic overview and comparison of the current application status and research on the mechanism of S/S technology, and the long-term stability of solidified/stabilized fly ash is a crucial factor in controlling the risks of landfills. Subsequently, it examines the influencing factors and mechanisms associated with heavy metals leaching under different environmental scenarios (meteorological factors, leachate and acid rain erosion, and carbonation, etc.), and concludes that single stabilization technology is difficult to meet long-term landfill requirements. Finally, the limits of heavy metal leaching toxicity evaluation methods and landfilled fly ash supervision were discussed, and relevant suggestions for future development were proposed. This study can provide theoretical instruction and technical support for the risk control of potential environmental risks of heavy metals in solidified/stabilized fly ash from landfills in China.

Isotopic insights and integrated analysis for heavy metal levels, ecological risks, and source apportionment in river sediments of the Qinghai-Tibet Plateau

The research was carried out to examine the pollution characteristics, ecological risk, and origins of seven heavy metals (Hg, As, Pb, Cu, Cd, Zn, and Ni) in 51 sediment samples gathered from 8 rivers located on the Qinghai-Tibet Plateau (QTP) in China. The contents of Hg and Cd were 5.0 and 1.1 times higher than their background values, respectively. The mean levels of other measured heavy metals were below those found naturally in the local soil. The enrichment factor showed that the study area exhibited significantly enriched Hg with 70.6% sampling sites. The Cd contents at 19.6% of sampling sites were moderately enriched. The other sampling sites were at a less enriched level. The sediments of all the rivers had a medium level of potential ecological risk. Hg was the major ecological risk factor in all sampling sites, followed by Cd. The findings from the positive matrix factorization (PMF) analysis shown agricultural activities, industrial activities, traffic emissions, and parent material were the major sources. The upper, middle, and low reaches of the Quanji river had different Hg isotope compositions, while sediments near the middle reaches were similar to the δ202Hg of the industrial source. At the upstream sampling sites, the Hg isotope content was very close to the background level. The results of this research can establish a strong scientific sound to improve the safety of the natural circumstances of rivers on the QTP.

Insight into heavy metal chemical fractions in ash collected from municipal and industrial waste incinerators in northern Vietnam

This investigation involved the collection of fly ash and bottom ash specimens from seven waste incinerators situated in the northern provinces of Vietnam, aimed at assessing the composition and distribution patterns of five chemical fractions of heavy metals (Pb, Cr, As, Cd Cu, and Zn) present in incinerator waste ash. The outcomes reveal that fly ash exhibited a relatively elevated concentration of industrial waste metals (25-66%) such as As, Cd, and Pb primarily in exchangeable (F1) and carbonate fractions (F2), which are mobile forms susceptible to environmental dissolution and consequential bioaccumulation posing health risks to humans. The predominant states of the metals Cr, Cu, and Zn were identified as residual, Fe-Mn oxide, and carbonate, respectively, with their relative proportions showing minimal variation. Conversely, heavy metals were predominantly present in residual residue and Fe-Mn bound form (F3) in bottom ash derived from both residential and commercial waste incineration operations. The non-carcinogenic hazard indices (HI) associated with the examined metals, ranked for both adults and children, were as follows: Pb > Cr > As > Cd > Cu > Zn. Notably, the HI values for Pb, Cr, and As exceeded the permissible threshold (HI > 1) for children. However, the risk of As, Cd, and Pb-related cancer via exposure pathways remained within acceptable limits for both age groups. Conversely, the probability of carcinogenic effects attributable to Cr surpassed the permissible threshold (>10-4), indicating significant health concerns associated with heavy metals in waste incinerators for humans, particularly children.

Tackling municipal solid waste crisis in India: Insights into cutting-edge technologies and risk assessment

Municipal Solid Waste (MSW) management is a pressing global concern, with increasing interest in Waste-to-Energy Technologies (WTE-T) to divert waste from landfills. However, WTE-T adoption is hindered by financial uncertainties. The economic benefits of MSW treatment and energy generation must be balanced against environmental impact. Integrating cutting-edge technologies like Artificial Intelligence (AI) can enhance MSW management strategies and facilitate WTE-T adoption. This review paper explores waste classification, generation, and disposal methods, emphasizing public awareness to reduce waste. It discusses AI's role in waste management, including route optimization, waste composition forecasting, and process parameter optimization for energy generation. Various energy production techniques from MSW, such as high-solids anaerobic digestion, torrefaction, plasma pyrolysis, incineration, gasification, biodegradation, and hydrothermal carbonization, are examined for their advantages and challenges. The paper emphasizes risk assessment in MSW management, covering chemical, mechanical, biological, and health-related risks, aiming to identify and mitigate potential adverse effects. Electronic waste (E-waste) impact on human health and the environment is thoroughly discussed, highlighting the release of hazardous substances and their contribution to air, soil, and water pollution. The paper advocates for circular economy (CE) principles and waste-to-energy solutions to achieve sustainable waste management. It also addresses complexities and constraints faced by developing nations and proposes strategies to overcome them. In conclusion, this comprehensive review underscores the importance of risk assessment, the potential of AI and waste-to-energy solutions, and the need for sustainable waste management to safeguard public health and the environment.

Risk assessment for the long-term stability of fly ash-based cementitious material containing arsenic: Dynamic and semidynamic leaching

Fly ash from municipal solid waste incineration (MSWIFA) contains leachable heavy metals (HMs), and the environmental risk of contained HMs is an important concern for its safe treatment and disposal. This paper presents a dynamic leaching test of fly ash-based cementitious materials containing arsenic (FCAC) in three particle sizes based on an innovative simulation of two acid rainfall conditions to investigate the long-term stability of FCAC under acid rain conditions. As well as semi-dynamic leaching test by simulating FCAC in three scenarios. Furthermore, the long-term stability risk of FCAC is evaluated using a sequential extraction procedure (SEP) and the potential risk assessment index. Results showed that the Al3+ in the FCAC dissolved and reacted with the OH- in solution to form Al(OH)3 colloids as the leaching time increased. Moreover, the oxidation of sulfide minerals in the slag produced oxidants, such as H2SO4 and Fe2(SO4)3, which further aggravated the oxidative dissolution of sulfides, thereby resulting in an overall decreasing pH value of the leachate. In addition, due to the varying particle sizes of the FCAC, surface area size, and adsorption site changes, the arsenic leaching process showed three stages of leaching characteristics, namely, initial, rapid, and slow release, with a maximum leaching concentration of 2.42 mg/L, the cumulative release of 133.78 mg/kg, and the cumulative release rate of 2.32%. The SEP test revealed that the reduced state of HMs in the raw slag was lowered substantially, and the acid extractable state and residual state of HMs were increased, which was conducive to lessening the risk of FCAC. Overall, the geological polymerization reaction of MSWIFA is a viable and promising solution to stabilize mining and industrial wastes and repurpose the wastes into construction materials.

A 20-year shift in China's sewage sludge heavy metals and its feasibility of nutrient recovery in land use

Recycling resources from wastewater is even more important for developing a more sustainable society. Disposing sewage sludge, which accumulates most pollutants and resources in sewage, is the main challenge in wastewater pollution control and resource utilization. Heavy metals (HMs) are the greatest constraint limiting the application of sewage sludge to land as a sustainable use of this material. We conducted a meta-analysis of the concentrations of HMs in Chinese sewage sludge by combining data from studies published from 2000 to 2019 (N = 8477). Over this period, the reported concentrations of HMs in sewage sludge declined in three stages (a fluctuating stage, a slight decrease stage, and a rapid and stable decrease stage). The results revealed that economic development and environmental policy implementation were the main factors mitigating HM pollution in sewage sludge in China. Moreover, if environmental regulations were strengthened and HM pollution-mitigation strategies were made consistent, such that the proportion of sewage sludge applied to land in China could be increased from 18.6% to 48.0% (the proportion applied to land in the United States), the ecosystem services analysis showed that huge ecological-economic benefits could be realized (3.1 billion Chinese Yuan) and the use of fertilizers could be substantially reduced (the use of nitrogen fertilizers by 8.5% and the use of phosphate fertilizers by 18.1%). This review shows that China should formulate a unified policy and interdepartmental committee for sustainable application of sewage sludge to land and wastewater resource recycling management.

Onsite treatment of wastes in municipal waste incinerator: Co-sintering of fly ash and leachate sludge into value-added ceramic granule

The leachate sludge (LS) and fly ash (FA) are the foci of hazardous wastes which generated from the municipal solid waste incineration (MSWI). The current work developed a new way to use energy from MSWI process for the on-site sintering of LS and FA at a relatively low temperature. With the assistance of CaF2, granule of LS and MSWI FA were co-sintered. The influence of temperature, the mass of CaF2, and the mass ratio of LS/MSWI FA were investigated. As a result, heavy metals volatilization and leaching in the form of chlorinated salts were controlled. In addition, CaF2 improved the compressive strength of the granule under low-temperature sintering. Moreover, the scale-up co-sintering test was achieved in an MSWI chamber. The results showed that the optimum condition was sintering at 973K for 1 h. The compressive strength of sintered product reached 4.25 MPa, which met the standard of ceramic granule. Moreover, with the addition of CaF2, the volatilization rate of Pb, Zn, and Cd decreased by 6%, 7%, and 6%, respectively. This method can be a promising technique for the utilization of solid wastes.

Community-driven research and capacity building to address environmental justice concerns with industrial air pollution in Curtis Bay, South Baltimore

Introduction

Curtis Bay (CB) is an environmental justice (EJ) community in South Baltimore. With a high concentration of industrial polluters and compounding non-chemical stressors, CB has experienced socioeconomic, quality of life, and health burdens for over 100 years. Today, these polluters include the open-air CSX Coal Terminal, waste-to-energy incinerators, and heavy diesel traffic through residential areas. The Community of Curtis Bay Association, Free Your Voice, and South Baltimore Community Land Trust are local organizations enacting a vision for equitable, healthy, and community-led development without industrial encroachment. In response to community-identified EJ concerns and an explosion at the CSX Coal Terminal, CB community groups partnered with academic researchers to develop a community-driven hyperlocal air monitoring and capacity building approach. This paper describes this approach to characterizing hyperlocal air quality in CB, building bridges between community residents and regulatory agencies, and nurturing a cohesive and effective community-academic partnership toward EJ.

Methods

Using hyperlocal air monitoring, we are collecting real-time air pollution (particulate matter, black carbon, and ground-level gas species) and meteorological data from 15 low-cost sensors in residential and industrial areas of CB. We also use trail cameras to record activities at the CSX Coal Terminal. We merge air pollution and industrial activity data to evaluate the following: overall air quality in CB, multi-air pollutant profiles of elevated events, spatiotemporal changes in air quality in the community, patterns of industrial activity, and potential correlations between air quality and observed industrial activity. Members of our partnership also lead a high school course educating students about the history and ongoing efforts of the EJ movement in their community. Students in this course learn how to employ qualitative and quantitative data collection and analysis methods to bring scientific support to community EJ concerns.

Results and Discussion

Our hyperlocal air monitoring network and community-academic partnership are continuing to evolve and have already demonstrated the ability to respond to community-identified EJ issues with real-time data while developing future EJ leaders. Our reflections can assist other community and academic groups in developing strong and fruitful partnerships to address similar EJ issues.

Regional CO2 accounting and market layout of incinerator fly ash management in China

The reduction of greenhouse gas (GHG) emissions from solid waste incinerator fly ash (IFA) management attracts growing interests since China's zero-waste plan and carbon peak/neutral goals. Herein, provincial GHG emissions from four demonstrated IFA reutilization technologies in China were estimated after analyzing IFA spatial-temporal distribution. Results indicate that technologies transition (landfilling-to-reutilization) could reduce GHG except for glassy slag production. IFA to cement option could potentially realize negative GHG emissions. Spatial GHG variation drivers in IFA management were recognized as provincial-different IFA composition and power emission factors. IFA management options were recommended provincially after weighting local development goals related to GHG reduction and economic benefits. Baseline scenario analysis shows that China's IFA industry would reach carbon peak in 2025 (5.02 Mt). 2030's GHG reduction potential (6.12 Mt) is equivalent to that of absorbed CO₂ by 340 million trees annually. Overall, this research could contribute to illustrating future market layout complying with carbon peaking.

A strategic review on sustainable approaches in municipal solid waste management andenergy recovery: Role of artificial intelligence,economic stability andlife cycle assessment

The consumption of energy levels has increased in association with economic growth and concurrently increased the energy demand from renewable sources. The need under Sustainable Development Goals (SDG) intends to explore various technological advancements for the utilization of waste to energy. Municipal Solid Waste (MSW) has been reported as constructive feedstock to produce biofuels, biofuel carriers and biochemicals using energy-efficient technologies in risk freeways. The present review contemplates risk assessment and challenges in sorting and transportation of MSW and different aspects of conversion of MSW into energy are critically analysed. The circular bioeconomy of energy production strategies and management of waste are also analysed. The current scenario on MSW and its impacts on the environment are elucidated in conjunction with various policies and amendments equipped for the competent management of MSW in order to fabricate a sustained environment.

Non-destructive study on identifying and monitoring of Cu-Pb pollution in corn based on near-infrared spectroscopy

The problem of heavy metal pollution in the environment is of increasing concern, especially in the agricultural environment. In this study, a method of element identification and pollution degree monitoring of Cu and Pb pollution in corn was proposed by using variational mode decomposition (VMD) and bispectrum estimation. The results showed that the u₃ component of VMD shows sensitivity to corn heavy metal monitoring. The bispectrum graphs of healthy corn leaves, Cu polluted, and Pb polluted were significantly different; these differences could quickly distinguish whether corn was polluted by heavy metals and the categories of pollution elements. The pollution prediction models constructed by the combination of the normalized frequency (f_m) and the energy entropy (W_ee) were proven to have a high fitting degree and application accuracy after verification, which can effectively monitor the pollution of Cu and Pb in corn. It provides a basis for the monitoring of pollution in the agricultural environment and the formulation of targeted control plans.

Zeolite NaP1 synthesized from municipal solid waste incineration fly ash for photocatalytic degradation of methylene blue

The disposal of hazardous municipal solid waste incineration (MSWI) fly ash is a challenge nowadays. Recently, the re-utilization of MSWI fly ash by converting it to useful zeolite-containing materials has attracted attention. However, the zeolitic products fabricated from MSWI fly ash are usually of low quality and rarely reported to be applied for photocatalysis. In this study, valuable zeolites (e.g., NaP1) are synthesized from MSWI fly ash via a modified microwave-assisted hydrothermal method. The key parameters for the hydrothermal method including temperature, duration, the amount of additive, and water volume, are investigated and optimized. Specifically, increasing the hydrothermal temperature can promote the synthesis of zeolitic materials; a relatively long hydrothermal duration is essential to accomplish the assembly of zeolites; the addition of Na₂SiO₃ can increase the precursor for the fabrication of zeolites; the water volume makes little influence on the crystal style of products. Eventually, the hydrothermal condition of 180 °C, 1 h, 0.5 g Na₂SiO₃, and 10 mL water is suggested based on the energy consumption and the quality of zeolites. The product containing zeolite NaP1 from such a condition is further applied to degrade methylene blue by photocatalysis. The removal rate has reached 96% within 12 h, which dramatically surpasses that of the raw fly ash (38%). Such excellent photocatalytic performance is attributed to the 10-fold increased surface area (24.864 m² g^-1) and active metal elements embedding in the zeolite structures.

Immobilization of by-product sulfate salt slag from high-salt organic wastewater with fly ash in lightweight aggregate ceramsite

The lightweight aggregate ceramsite (LAC) was prepared from by-product sulfate salt slag (BPSS) of high-salt organic wastewater with fly ash. The BPSS fixation rate, leaching toxicity, morphological structures and potential environmental risks of heavy metals in LAC were investigated. BPSS can be fixed in LAC when the mass ratio of Fly ash: Kaolin: clay was 7:1:2, the addition of BPSS was 28%, the heating rate was 8°C min^-1, and the calcination temperature was 1100°C. The characteristics of the LAC met the requirements for Chinese lightweight aggregate standards (GB/T17431.2-2010). The Total Organic Carbon (TOC) content of the aqueous leaching liquor in LAC was less than 0.5 mg·L^-1. And the fixation rate of heavy metal was more than 99%, which meets the requirements of GB 5085.3-2007. The BPSS immobilization mechanisms were mainly related to the formation of new crystal phases, including Leucite (KAlSi₂O₆), Albite (Na₂O·Al₂O₃·6SiO₂), Potash Feldspar (K₂O·Al₂O₃·6SiO₂), Jadeite (NaAlSi₂O₆), Hauyne ([Na,Ca]₈[Si,Al]₁₂O₂₄[SO₄]₂), Nosean (Na₈Al₆Si₆O₂₄SO₄), and Sodalite (Na₈Al₆Si₆O₂₄[MnO₄]₂) by incorporation of heavy metals in high-temperature curing reaction. This work provides an effective method for the harmless treatment and recycling of by-product salt residues from high-salt organic wastewater.

Research on Pavement Performance of Cement-Stabilized Municipal Solid Waste Incineration Bottom Ash Base

In order to clarify the influence of the municipal solid waste incineration bottom ash (MSWI BA) content on the pavement performance of the cement-stabilized macadam, the MSWI BA with 0%, 25%, 38% and 50% content was used instead of fine aggregates. To explore the feasibility of building pavement base with cement stabilized MSWI BA, the cement-stabilized MSWI BA mixture was prepared by mixing the MSWI BA at the mass fraction of 50%, 75% and 100% with fine crushed stuff. Subsequently, the compaction test and 7 days unconfined compression test were conducted with 4%, 5% and 6% cement dosage. The compaction test, unconfined compressive strength test, splitting strength test, compressive resilient modulus test and frost resistance tests were carried out based on the long-age samples with an optimal cement dosage of 5%. Furthermore, the unconfined compressive constitutive model was established based on the test data. Afterwards, the test road was built to measure the practical effect of MSWI BA on road construction. Meanwhile, energy-saving and emission-reduction analyses were conducted on the MSWI BA road. The results showed that under 5% cement dosage, the mechanical properties and frost resistance of the mixture with different MSWI BA content both satisfied the specification requirements; during the construction, the appropriate MSWI BA content could be selected according to the requirements of different highway grades in the specification. The established segmented constitutive model could well simulate the stress-strain relationship of the mixture in the compressive process. Using cement-stabilized MSWI BA to build the pavement base was feasible, which provided not only an important reference for the engineering design but also had positive significance for promoting carbon peaking, carbon neutrality and sustainable development of highway engineering construction.

Contamination, Source Apportionment, and Health Risk Assessment of Heavy Metals in Farmland Soils Surrounding a Typical Copper Tailings Pond

Tailings resulting from mining and smelting activities may cause soil heavy-metal pollution and harm human health. To evaluate the environmental impact of heavy metals from tailings on farmland soils in the surrounding area, heavy metals (As, Cd, Cr, Cu, Ni, Pb, and Zn) in tailings and farmland soils in the vicinity of a typical copper tailings pond were analyzed. Contamination status, potential sources, and health risks for farmland soils were investigated. The results showed that the tailings contained a high concentration of Cu (1136.23 mg/kg). The concentrations of Cd and Cu in the farmland soils exceeded the soil quality standard. The geoaccumulation index (I_geo) indicated that the soils were moderately polluted by Cu and Cd, and slightly polluted by Ni, Cr, and Zn. The absolute principal component scores-multiple linear regression (APCS-MLR) model was applied for source apportionment. The results showed that tailings release is the main source of soil heavy-metals contamination, accounting for 35.81%, followed by agricultural activities (19.41%) and traffic emission (16.31%). The health risk assessment suggested that the children in the study region were exposed to non-carcinogenic risks caused by As, while the non-carcinogenic risk to adults and the carcinogenic risk to both adults and children were at acceptable levels. It is necessary to take effective measures to control heavy-metal contamination from tailings releases to protect humans, especially children, from adverse health risks.

Heavy metal removal using an advanced removal method to obtain recyclable paper incineration ash

Various agents, including ethylenediaminetetraacetic acid, oxalic acid, citric acid, and HCl, were applied to remove heavy metals from raw paper incineration ash and render the ash recyclable. Among these prepared agent solutions, ethylenediaminetetraacetic acid showed the highest efficiency for Pb removal, while oxalic acid showed the highest efficiencies for Cu, Cd, and As removal. Additionally, three modes of an advanced removal method, which involved the use of both ethylenediaminetetraacetic acid and oxalic acid, were considered for use at the end of the rendering process. Among these three modes of the advanced removal method, that which involved the simultaneous use of ethylenediaminetetraacetic acid and oxalic acid, i.e., a mixture of both solutions, showed the best heavy metal removal efficiencies. In detail, 11.9% of Cd, 10% of Hg, 28.42% of As, 31.29% of Cu, and 49.19% of Pb were removed when this method was used. Furthermore, the application of these three modes of the advanced removal method resulted in a decrease in the amounts of heavy metals eluted and brought about an increase in the CaO content of the treated incineration ash, while decreasing its Cl content. These combined results enhanced the solidification effect of the treated incineration ash. Thus, it was confirmed that the advanced removal method is a promising strategy by which recyclable paper incineration ash can be obtained.

Investigation and Evaluation of Flue Gas Pollutants Emission in Waste-to-Energy Plant with Flue Gas Recirculation

The emissions of pollutants by waste-to-energy power plants, which contain more toxic substances owing to the complicated composition of municipal solid waste (MSW), such as NOx, SO2, HCl, HF, particulate matter, and heavy metals, has attracted increasing attention worldwide. To effectively control the pollutants, a flue gas cleaning system is indispensable in the operation of MSW incineration power plants. In this study, the flue gas cleaning system in a waste-to-energy power plant with flue gas recirculation (FGR) was evaluated. The concentrations of various pollutants were measured and compared with the standards at home and abroad. The results indicated that NOx emission can be effectively reduced by FGR, and that the emission concentration of NOx may meet the national emission standards only by adopting FGR. However, the emission levels of HCl and PM exceeded the limits in legislative standards; therefore, operation optimization or retrofit of a deacidification system and bag filter were proposed to comply with the international standards and near-zero-emissions goal.

Municipal solid waste management: Dynamics, risk assessment, ecological influence, advancements, constraints and perspectives

Global energy consumption has been increasing in tandem with economic growth, putting pressure on the world's supply of renewable energy sources. Municipal Solid waste (MSW) has been reported contributing immensely to the improvement of a secure environment and renewable sources. Energy scarcity and conventional MSW disposal methods in developing countries lead towards many environmental and economic issues. Scientists have been able to experiment with various waste-to-energy conversion technologies in light of this situation. This communication highlights and reviews WtE technologies to convert MSW and other feedstocks into electricity, hydrogen gas, bioethanol along with other value added products like fertilizer(s), platform chemicals as an environmentally friendly products. This review comprehensively summarized the dynamics, risk assessment, ecological influence, advancements, constraints and perspectives altogether in field of municipal solid waste management and treatment. Stare-of-the-art information on ecological influence and risk assessment in handling and transportation of municipal solid waste has been provided. Advanced trends involved in remediation of emerging pollutants and resources obtained from municipal solid wastes have been uncovered. Lastly, this paper comprises constraints and perspectives for uncovering MSW based circular bioeconomy aspects.