Exposure assessment in Beijing, China: biological agents, ultrafine particles, and lead

A review of pathogenic airborne fungi and bacteria: unveiling occurrence, sources, and profound human health implication

Airborne fungi and bacteria have been extensively studied by researchers due to their significant effects on human health. We provided an overview of the distribution and sources of airborne pathogenic microbes, and a detailed description of the detrimental effects that these microorganisms cause to human health in both outdoor and indoor environments. By analyzing the large body of literature published in this field, we offered valuable insights into how airborne microbes influence our well-being. The findings highlight the harmful consequences associated with the exposure to airborne fungi and bacteria in a variety of natural and human-mediated environments. Certain demographic groups, including children and the elderly, immunocompromised individuals, and various categories of workers are particularly exposed and vulnerable to the detrimental effect on health of air microbial pollution. A number of studies performed up to date consistently identified Alternaria, Cladosporium, Penicillium, Aspergillus, and Fusarium as the predominant fungal genera in various indoor and outdoor environments. Among bacteria, Bacillus, Streptococcus, Micrococcus, Enterococcus, and Pseudomonas emerged as the dominant genera in air samples collected from numerous environments. All these findings contributed to expanding our knowledge on airborne microbe distribution, emphasizing the crucial need for further research and increased public awareness. Collectively, these efforts may play a vital role in safeguarding human health in the face of risks posed by airborne microbial contaminants.

Indoor air quality in subway microenvironments: Pollutant characteristics, adverse health impacts, and population inequity

Rapidly increasing urbanization in recent decades has elevated the subway as the primary public transportation mode in metropolitan areas. Indoor air quality (IAQ) inside subways is an important factor that influences the health of commuters and subway workers. This review discusses the subway IAQ in different cities worldwide by comparing the sources and abundance of particulate matter (PM2.5 and PM10) in these environments. Factors that affect PM concentration and chemical composition were found to be associated with the subway internal structure, train frequency, passenger volume, and geographical location. Special attention was paid to air pollutants, such as transition metals, volatile/semi-volatile organic compounds (VOCs and SVOCs), and bioaerosols, due to their potential roles in indoor chemistry and causing adverse health impacts. In addition, given that the IAQ of subway systems is a public health issue worldwide, we calculated the Gini coefficient of urban subway exposure via meta-analysis. A value of 0.56 showed a significant inequity among different cities. Developed regions with higher per capita income tend to have higher exposure. By reviewing the current advances and challenges in subway IAQ with a focus on indoor chemistry and health impacts, future research is proposed toward a sustainable urban transportation systems.

Air sampling and ATP bioluminescence for quantitative detection of airborne microbes

Exposure to bioaerosol contamination has detrimental effects on human health. Recent advances in ATP bioluminescence provide more opportunities for the quantitative detection of bioaerosols. Since almost all active organisms can produce ATP, the amount of airborne microbes can be easily measured by detecting ATP-driven bioluminescence. The accurate evaluation of microorganisms mainly relies on following the four key steps: sampling and enrichment of airborne microbes, lysis for ATP extraction, enzymatic reaction, and measurement of luminescence intensity. To enhance the effectiveness of ATP bioluminescence, each step requires innovative strategies and continuous improvement. In this review, we summarized the recent advances in the quantitative detection of airborne microbes based on ATP bioluminescence, which focuses on the advanced strategies for improving sampling devices combined with ATP bioluminescence. Meanwhile, the optimized and innovative strategies for the remaining three key steps of the ATP bioluminescence assay are highlighted. The aim is to reawaken the prosperity of ATP bioluminescence and promote its wider utilization for efficient, real-time, and accurate detection of airborne microbes.

Online monitoring system for qualitative and quantitative analysis of bioaerosols by combined ATP bioluminescence assay with loop-mediated isothermal amplification

Rapid detection of airborne pathogens is crucial in preventing respiratory infections and allergies. However, technologies aiming to real-time analysis of microorganisms in air remain limited due to the sparse and complex nature of bioaerosols. Here, we introduced an online bioaerosol monitoring system (OBMS) comprised of integrated units including a rotatable stainless-steel sintered filter-based sampler, a lysis unit for extracting adenosine triphosphate (ATP), and a single photon detector-based fluorescence unit. Through optimization of the ATP bioluminescence method and establishment of standard curves between relative luminescence units (RLUs) and ATP as well as microbial concentration, we achieved simultaneous detection of bioaerosols' concentration and activity. Testing OBMS with four bacterial and two fungal aerosols at a sampling flow rate of 10 to 50 L/min revealed an outstanding collection efficiency of 95 % at 30 L/min. A single OBMS measurement takes only 8 min (sampling: 5 min; lysis and detection: 3 min) with detection limits of 3 Pcs/ms photons (2.9 × 103 and 292 CFU/m3 for Staphylococcus aureus and Candida albicans aerosol). In both laboratory and field tests, OBMS detected higher concentrations of bioaerosol compared to the traditional Andersen impactor and liquid biosampler. When combined OBMS with loop-mediated isothermal amplification (LAMP), the bioaerosol can be qualitative and quantitative analyzed within 40 min without the cumbersome procedures of sample pretreatment and DNA extraction. These results offer a high compressive and humidity resistance membrane filtration sampler and validate the potential of OBMS for online measurement of bioaerosol concentration and composition.

Recent progress in online detection methods of bioaerosols

The aerosol transmission of coronavirus disease in 2019, along with the spread of other respiratory diseases, caused significant loss of life and property; it impressed upon us the importance of real-time bioaerosol detection. The complexity, diversity, and large spatiotemporal variability of bioaerosols and their external/internal mixing with abiotic components pose challenges for effective online bioaerosol monitoring. Traditional methods focus on directly capturing bioaerosols before subsequent time-consuming laboratory analysis such as culture-based methods, preventing the high-resolution time-based characteristics necessary for an online approach. Through a comprehensive literature assessment, this review highlights and discusses the most commonly used real-time bioaerosol monitoring techniques and the associated commercially available monitors. Methods applied in online bioaerosol monitoring, including adenosine triphosphate bioluminescence, laser/light-induced fluorescence spectroscopy, Raman spectroscopy, and bioaerosol mass spectrometry are summarized. The working principles, characteristics, sensitivities, and efficiencies of these real-time detection methods are compared to understand their responses to known particle types and to contrast their differences. Approaches developed to analyze the substantial data sets obtained by these instruments and to overcome the limitations of current real-time bioaerosol monitoring technologies are also introduced. Finally, an outlook is proposed for future instrumentation indicating a need for highly revolutionized bioaerosol detection technologies.

Indoor air quality of urban public transportation stations in China: Based on air quality evaluation indexes

Indoor air quality (IAQ) of urban public transportation stations (UPTS) has adverse health impacts on the station employees and commuters. However, there is a lack of comprehensively evaluations of IAQ in waiting rooms of UPTS. Therefore, it is crucial to select appropriate air quality indexes (including fuzzy synthetic index (B), comprehensive index (P), I1 index, and indoor air quality index (IAQI)) to assess air quality and potential health risks. Our study is a subsample of the CPPEHS 2019 study, which included 224 UPTS in 126 cities of China. We found that P index showed an excellent air quality rate of 95.96% in the railway stations and 83.19% in the inter-city bus stations. The P index was correlated with UPTS usage years, useable area, and per passenger useable area. Furthermore, waiting rooms in UPTS with good (OR = 1.9187, 95% CI: 1.1204, 3.2859) and bad (OR = 2.0854, 95% CI: 1.2182, 3.5698) air quality evaluated by P index had a higher risk of rhinitis compared to those with excellent air quality. Similarly, UPTS with good (OR = 2.2202, 95% CI: 1.3427, 3.6711), bad (OR = 1.7897, 95% CI: 1.0807, 2.9637), and serious (OR = 1.7478, 95% CI: 1.0098, 3.0250) air quality evaluated by P index were associated with a higher risk of pharyngitis. These findings suggested that P index is the optimal index for assessing air quality in UPTS, while IAQI may exaggerate indoor air pollution and the B index may underestimate it. Overall, this study aims to identify and evaluate the more suitable air quality index (P) in nationwide UPTS, providing valuable insights for control of IAQ and guiding the air quality management and standards.

Review of bioaerosols from different sources and their health impacts

The emission of bioaerosols in the ambient atmosphere from different sources is a cause of concern for human health and the environment. Bioaerosols are a combination of biotic matter like microbes and pollens. The present review emphasizes the understanding of various sources of bioaerosols (industries, municipal solid waste, and medical facilities), their components, and their impact on human health. The study of bioaerosols is of great importance as large numbers of people are estimated to be exposed on the global scale. Bioaerosols exposure in different work environments results in health issues such as infectious diseases, allergies, toxic effects, and respiratory problems. Hence, extensive research is urged to establish an effective assessment of bioaerosols exposure in the workplace, risks involved, distribution, and validation. The present review is intended to explore the relationship between bioaerosols exposure to the atmosphere and its impacts on human health. Some of the preliminary findings, based on our analysis of bioaerosols arising from municipal solid waste at a landfill site and a waste transfer station in Hyderabad, India, are also discussed herein.

A review on characteristics and mitigation strategies of indoor air quality in underground subway stations

Due to the rapidly increasing ridership and the relatively enclosed underground space, the indoor air quality (IAQ) in underground subway stations (USSs) has attracted more public attention. The air pollutants in USSs, such as particulate matter (PM), CO₂ and volatile organic compounds (VOCs), are hazardous to the health of passengers and staves. Firstly, this paper presents a systematic review on the characteristics and sources of air pollutants in USSs. According to the review work, the concentrations of PM, CO₂, VOCs, bacteria and fungi in USSs are 1.1-13.2 times higher than the permissible concentration limits specified by WHO, ASHRAE and US EPA. The PM and VOCs are mainly derived from the internal and outdoor sources. CO₂ concentrations are highly correlated with the passenger density and the ventilation rate while the exposure levels of bacteria and fungi depend on the thermal conditions and the settled dust. Then, the online monitoring, fault detection and prediction methods of IAQ are summarized and the advantages and disadvantages of these methods are also discussed. In addition, the available control strategies for improving IAQ in USSs are reviewed, and these strategies are classified and compared from different viewpoints. Lastly, challenges of the IAQ management in the context of the COVID-19 epidemic and several suggestions for underground stations' IAQ management in the future are put forward. This paper is expected to provide a comprehensive guidance for further research and design of the effective prevention measures on air pollutants in USSs so as to achieve more sustainable and healthy underground environment.

Comparison of airborne bacteria and fungi in different built environments in selected cities in five climate zones of China

Bioaerosols in different built environments and climate zones have unique effects on occupant health, which demands comparisons of their characteristics to make targeted control measures. This study investigated bioaerosol distribution in five different climate zones across China with four building types (n = 686 rooms). The results showed significant disparities in bioaerosol concentrations among various buildings and climate zones. The bacterial concentrations in residences (536 ± 647 CFU/m³) were significantly higher than in schools, offices, and hospitals owing to different built environments and human activities. The highest mean value of fungal concentration was found in schools (826 ± 955 CFU/m³) due to their greater landscaping area. The bacterial concentrations in the cold zone (307 ± 506 CFU/m³) and the hot summer and cold winter zone (214 ± 180 CFU/m³) were significantly lower than in the other three climate zones. The fungal concentrations in the severe cold zone (709 ± 900 CFU/m³) and the hot summer and warm winter zone (1094 ± 832 CFU/m³) were significantly higher than in the other three climate zones; the lower the indoor temperature (T) and the higher the air exchange rate, the lower the indoor airborne bacterial concentration; the lower the relative humidity (RH), the lower the indoor airborne fungi. In addition, a higher air exchange rate could also reduce the effect of occupant density on indoor bacterial concentration. The results of this study provide valuable data on bioaerosol profiles in various built environments and climate zones and highlight the significance of T, RH, and air exchange rate on indoor bioaerosol concentrations.

SARS-CoV-2 aerosol transmission and detection

Aerosol transmission has been officially recognized by the world health authority resulting from its overwhelming experimental and epidemiological evidences. Despite substantial progress, few additional actions were taken to prevent aerosol transmission, and many key scientific questions still await urgent investigations. The grand challenge, the effective control of aerosol transmission of COVID-19, remains unsolved. A better understanding of the viral shedding into the air has been developed, but its temporal pattern is largely unknown. Sampling tools, as one of the critical elements for studying SARS-CoV-2 aerosol, are not readily available around the world. Many of them are less capable of preserving the viability of SARS-CoV-2, thus offering no clues about viral aerosol infectivity. As evidenced, the viability of SARS-CoV-2 is also directly impacted by temperature, humidity, sunlight, and air pollutants. For SARS-CoV-2 aerosol detection, liquid samplers, together with real-time polymerase chain reaction (RT-PCR), are currently used in certain enclosed or semi-enclosed environments. Sensitive and rapid COVID-19 screening technologies are in great need. Among others, the breath-borne-based method emerges with global attention due to its advantages in sample collection and early disease detection. To collectively confront these challenges, scientists from different fields around the world need to fight together for the welfare of mankind. This review summarized the current understanding of the aerosol transmission of SARS-CoV-2 and identified the key knowledge gaps with a to-do list. This review also serves as a call for efforts to develop technologies to better protect the people in a forthcoming reopening world.

Indoor exposure levels of bacteria and fungi in residences, schools, and offices in China: A systematic review

Microbes in buildings have attracted extensive attention from both the research community and the general public due to their close relationship with human health. However, there still lacks comprehensive information on the indoor exposure level of microbes in China. This study systematically reviews exposure levels, the community structures, and the impact factors of airborne bacteria and fungi in residences, schools, and offices in China. We reviewed the major literature databases between 1980 and 2019 and selected 55 original studies based on a set of criteria. Results show that the concentration of indoor bacteria varies from 72.5 to 7500 CFU/m³ , with a median value of 1000 CFU/m³ , and the concentration of fungi varies from 12 to 9730 CFU/m³ , with a median value of 526 CFU/m³ . The concentration level of microbes varies in different climate zones, with higher bacterial concentrations in the severe cold zone, and higher fungal concentrations in the hot summer and warm winter zone. Among different buildings, classrooms have the highest average bacteria and fungi levels. This review reveals that a unified assessment system based on health effects is needed for evaluating the exposure levels of bacteria and fungi.

Continuous Surveillance of Bioaerosols On-Site Using an Automated Bioaerosol-Monitoring System

Real-time on-site monitoring of bioaerosols in an air environment is important for preventing various adverse health effects including respiratory diseases and allergies caused by bioaerosols. Here, we report the development of an on-site automated bioaerosol-monitoring system (ABMS) using integrated units including a wet-cyclone bioaerosol sampler, a thermal-lysis unit for extracting adenosine triphosphate (ATP), an ATP-detection unit based on the immobilization of luciferase/luciferin for bioluminescence reactions, and a photomultiplier tube-based detector. The performance of the bioaerosol detection system was verified using Escherichia coli (E. coli) as a model source. Each unit was optimized to process ∼9.6 × 10⁵ times the concentrated ratio of collected bioaerosol samples, using a 3 min lysis time to extract ATP, and has a detection limit of ∼375 colony-forming units (CFUs)/mL with more than 30 days of stability for the immobilized-luciferase/luciferin detection unit supported by a glass-fiber conjugation pad. After the integration of all units, the ABMS achieved E. coli bioaerosol monitoring with continuous detection at 5 min intervals and a minimum detection limit of ∼130 CFU/m_air³. Furthermore, the rapid responsivity and stable operation performance of the ABMS under test-bed conditions and during a field test demonstrated that the ABMS is capable of continuously monitoring bioaerosols in real-time with high sensitivity. The monitoring system developed here with immobilization strategies for bioluminescence reactions triggered by ATP extracted from collected bioaerosol samples using a simple heat-lysis method may help establish sustainable platforms to obtain stable signals for the real-time detection of bioaerosols on-site.

Ambient bioaerosol distribution and associated health risks at a high traffic density junction at Dehradun city, India

Traffic junctions are one of the crowded places where commuters are at high risk of developing respiratory infections, due to their greater exposure to airborne and human transmitted microbial pathogens. An airborne bioaerosol assessment study was carried out at a high traffic density junction focusing on their concentration, contribution in respirable particulate matter (PM), and factors influencing the distribution and microbial diversity. Andersen six-stage viable cascade impactor and a wide-range aerosol spectrometer were used for microbial and particulate matter measurements, respectively. Statistical analysis was conducted to evaluate the relationship between bioaerosol concentration, vehicular count, PM concentration, and meteorological parameters. The mean bacteria concentration (1962.95 ± 651.85 CFU/m3) was significantly different than fungi (1118.95 ± 428.34 CFU/m3) (p < 0.05). The temporal distribution showed maximum concentration for bacteria and fungi during monsoon and postmonsoon seasons, respectively. In terms of bioaerosol loading, a considerable fraction of fungi (3.25%) and bacteria (5.65%) contributed to the total airborne PM. Most abundant bioaerosols were Aspergillus (27.58%), Penicillium (23%), and Cladosporium (14.05%) (fungi), and Micrococcus (25.73%), Staphylococcus (17.98%), and Bacillus (13.8%) (bacteria). Traffic-induced roadside soil resuspension and microbial aerosolizations from the human body were identified as the chief sources of bioaerosol emissions. The risk of lower respiratory tract infections caused by anthroponotic (human transmitted) transfer of bacterial pathogens is very high. The results of the study can be used to trace sources of microbial mediated communicable diseases, and to recommend appropriate safety measures to avoid pathogenic bioaerosol exposure.

Environmental and Health Effects of Ventilation in Subway Stations: A Literature Review

Environmental health in subway stations, a typical type of urban underground space, is becoming increasingly important. Ventilation is the principal measure for optimizing the complex physical environment in a subway station. This paper narratively reviews the environmental and health effects of subway ventilation and discusses the relevant engineering, environmental, and medical aspects in combination. Ventilation exerts a notable dual effect on environmental health in a subway station. On the one hand, ventilation controls temperature, humidity, and indoor air quality to ensure human comfort and health. On the other hand, ventilation also carries the potential risks of spreading air pollutants or fire smoke through the complex wind environment as well as produces continuous noise. Assessment and management of health risks associated with subway ventilation is essential to attain a healthy subway environment. This, however, requires exposure, threshold data, and thereby necessitates more research into long-term effects, and toxicity as well as epidemiological studies. Additionally, more research is needed to further examine the design and maintenance of ventilation systems. An understanding of the pathogenic mechanisms and aerodynamic characteristics of various pollutants can help formulate ventilation strategies to reduce pollutant concentrations. Moreover, current comprehensive underground space development affords a possibility for creating flexible spaces that optimize ventilation efficiency, acoustic comfort, and space perception.

Analysis of interdomain taxonomic patterns in urban street mats

Streets are constantly crossed by billions of vehicles and pedestrians. Their gutters, which convey stormwater and contribute to waste management, and are important for human health and well-being, probably play a number of ecological roles. Street surfaces may also represent an important part of city surface areas. To better characterize the ecology of this yet poorly explored compartment, we used filtration and DNA metabarcoding to address microbial community composition and assembly across the city of Paris, France. Diverse bacterial and eukaryotic taxonomic groups were identified, including members involved in key biogeochemical processes, along with a number of parasites and putative pathogens of human, animals and plants. We showed that the beta diversity patterns between bacterial and eukaryotic communities were correlated, suggesting interdomain associations. Beta diversity analyses revealed the significance of biotic factors (cohesion metrics) in shaping gutter microbial community assembly and, to a lesser extent, the contribution of abiotic factors (pH and conductivity). Co-occurrences analysis confirmed contrasting non-random patterns both within and between domains of life, specifically when comparing diatoms and fungi. Our results highlight microbial coexistence patterns in streets and reinforce the need to further explore biodiversity in urban ground transportation infrastructures.

Factors affecting ambient endotoxin and particulate matter concentrations around air vents of subway stations in South Korea

Levels of airborne endotoxins and particulate matter less than 10 μm and 2.5 μm in diameter (PM) were measured in the air vents of subway stations in Seoul, South Korea, and factors affecting both pollutants were analyzed. The measurements were completed from March 2016 to February 2017 for eight air vents situated at the ground level around the subway stations. A total of 166 air samples were collected and analyzed using the kinetic limulus amebocyte lysate assay. Endotoxin levels ranged from not detected to 1.986 EU m^-3, with a mean of 0.227 EU m^-3. The results showed significantly different PM levels from the measurements reported by AIRKOREA as part of the comprehensive air quality index. This can be attributed to different sampling sites in the same area. Endotoxin levels tended to be higher in fall compared to summer. Airborne bacteria levels showed a pattern similar to the endotoxin levels, but no significant association was reported between them. The levels of endotoxins around air vents with a glass cover and streets that allowed smoking were significantly higher than those not containing a walled barrier and streets in which smoking was prohibited. Multivariate regression analysis showed that the factors affecting endotoxin levels comprised air vents with a glass cover (coefficient = 0.106, p = 0.014) and season (coefficient = 0.062, p < 0.0001). Therefore, installing barriers on the air vents and prohibiting smoking in streets to which the vents open may be effective ways to lessen exposure to airborne endotoxin levels around air vents.

Airborne bioaerosols and their impact on human health

Bioaerosols consist of aerosols originated biologically such as metabolites, toxins, or fragments of microorganisms that are present ubiquitously in the environment. International interests in bioaerosols have increased rapidly to broaden the pool of knowledge on their identification, quantification, distribution, and health impacts (e.g., infectious and respiratory diseases, allergies, and cancer). However, risk assessment of bioaerosols based on conventional culture methods has been hampered further by several factors such as: (1) the complexity of microorganisms or derivatives to be investigated; (2) the purpose, techniques, and locations of sampling; and (3) the lack of valid quantitative criteria (e.g., exposure standards and dose/effect relationships). Although exposure to some microbes is considered to be beneficial for health, more research is needed to properly assess their potential health hazards including inter-individual susceptibility, interactions with non-biological agents, and many proven/unproven health effects (e.g., atopy and atopic diseases).

Air quality inside subway metro indoor environment worldwide: A review

The air quality in the subway metro indoor microenvironment has been of particular public concern. With specific reference to the growing demand of green transportation and sustainable development, subway metro systems have been rapidly developed worldwide in last decades. The number of metro commuters has continuously increased over recent years in metropolitan cities. In some cities, metro system has become the primary public transportation mode. Although commuters typically spend only 30-40min in metros, the air pollutants emitted from various interior components of metro system as well as air pollutants carried by ventilation supply air are significant sources of harmful air pollutants that could lead to unhealthy human exposure. Commuters' exposure to various air pollutants in metro carriages may cause perceivable health risk as reported by many environmental health studies. This review summarizes significant findings in the literature on air quality inside metro indoor environment, including pollutant concentration levels, chemical species, related sources and health risk assessment. More than 160 relevant studies performed across over 20 countries were carefully reviewed. These comprised more than 2000 individual measurement trips. Particulate matters, aromatic hydrocarbons, carbonyls and airborne bacteria have been identified as the primary air pollutants inside metro system. On this basis, future work could focus on investigating the chronic health risks of exposure to various air pollutants other than PM, and/or further developing advanced air purification unit to improve metro in-station air quality.

Continuous and real-time bioaerosol monitoring by combined aerosol-to-hydrosol sampling and ATP bioluminescence assay

We present a methodology for continuous and real-time bioaerosol monitoring wherein an aerosol-to-hydrosol sampler is integrated with a bioluminescence detector. Laboratory test was conducted by supplying an air flow with entrained test bacteria (Staphylococcus epidermidis) to the inlet of the sampler. High voltage was applied between the discharge electrode and the ground electrode of the sampler to generate air ions by corona discharge. The bacterial aerosols were charged by the air ions and sampled in a flowing liquid containing both a cell lysis buffer and adenosine triphosphate (ATP) bioluminescence reagents. While the liquid was delivered to the bioluminescence detector, sampled bacteria were dissolved by the cell lysis buffer and ATP was extracted. The ATP was reacted with the ATP bioluminescence reagents, causing light to be emitted. When the concentration of bacteria in the aerosols was varied, the ATP bioluminescence signal in relative light units (RLUs) closely tracked the concentration in particles per unit air volume (# cm^-3), as measured by an aerosol particle sizer. The total response time required for aerosol sampling and ATP bioluminescence detection increased from 30 s to 2 min for decreasing liquid sampling flow rate from 800 to 200 μLPM, respectively. However, lower concentration of S. epidermidis aerosols was able to be detected with lower liquid sampling flow rate (1 RLU corresponded to 6.5 # cm^-3 of S. epidermidis aerosols at 200 μLPM and 25.5 # cm^-3 at 800 μLPM). After obtaining all data sets of concentration of S. epidermidis aerosols and concentration of S. epidermidis particles collected in the flowing liquid, it was found that with our bioluminescence detector, 1 RLU corresponded to 1.8 × 10⁵ (±0.2 × 10⁵) # mL^-1 of S. epidermidis in liquid. After the lab-test with S. epidermidis, our bioaerosol monitoring device was located in the lobby of a building. Air sampling was conducted continuously for 90 min (air flow rate of 8 LPM, liquid flow rate of 200 μLPM) and the ATP bioluminescence signal of indoor bioaerosols was displayed with time. Air sampling was also carried out using the 6th stage of Andersen impactor in which a nutrient agar plate was used for the impaction plate. The sample was cultured at 37 °C for five days for colony counting. As a result, it was found that the variation of the bioluminescence signal closely followed the variation of indoor bioaerosol concentration in colony forming unit (CFU) and 1 RLU corresponded to 1.66 CFU m^-3 of indoor bioaerosols. Our method can be used as a trigger in biological air contamination alarm systems.

Inequitable Chronic Lead Exposure: A Dual Legacy of Social and Environmental Injustice

Both historic and contemporary factors contribute to the current unequal distribution of lead in urban environments and the disproportionate impact lead exposure has on the health and well-being of low-income minority communities. We consider the enduring impact of lead through the lens of environmental justice, taking into account well-documented geographic concentrations of lead, legacy sources that produce chronic exposures, and intergenerational transfers of risk. We discuss the most promising type of public health action to address inequitable lead exposure and uptake: primordial prevention efforts that address the most fundamental causes of diseases by intervening in structural and systemic inequalities.

Fast monitoring of indoor bioaerosol concentrations with ATP bioluminescence assay using an electrostatic rod-type sampler

A culture-based colony counting method is the most widely used analytical technique for monitoring bioaerosols in both indoor and outdoor environments. However, this method requires several days for colony formation. In this study, our goal was fast monitoring (Sampling: 3 min, Detection: < 1 min) of indoor bioaerosol concentrations with ATP bioluminescence assay using a bioaerosol sampler. For this purpose, a novel hand-held electrostatic rod-type sampler (110 mm wide, 115 mm long, and 200 mm tall) was developed and used with a commercial luminometer, which employs the Adenosine triphosphate (ATP) bioluminescence method. The sampler consisted of a wire-rod type charger and a cylindrical collector, and was operated with an applied voltage of 4.5 kV and a sampling flow rate of 150.7 lpm. Its performance was tested using Staphylococcus epidermidis which was aerosolized with an atomizer. Bioaerosol concentrations were measured using ATP bioluminescence method with our sampler and compared with the culture-based method using Andersen cascade impactor under controlled laboratory conditions. Indoor bioaerosol concentrations were also measured using both methods in various indoor environments. A linear correlation was obtained between both methods in lab-tests and field-tests. Our proposed sampler with ATP bioluminescence method may be effective for fast monitoring of indoor bioaerosol concentrations.

Indoor-air microbiome in an urban subway network: diversity and dynamics

Subway systems are indispensable for urban societies, but microbiological characteristics of subway aerosols are relatively unknown. Previous studies investigating microbial compositions in subways employed methodologies that underestimated the diversity of microbial exposure for commuters, with little focus on factors governing subway air microbiology, which may have public health implications. Here, a culture-independent approach unraveling the bacterial diversity within the urban subway network in Hong Kong is presented. Aerosol samples from multiple subway lines and outdoor locations were collected. Targeting the 16S rRNA gene V4 region, extensive taxonomic diversity was found, with the most common bacterial genera in the subway environment among those associated with skin. Overall, subway lines harbored different phylogenetic communities based on α- and β-diversity comparisons, and closer inspection suggests that each community within a line is dependent on architectural characteristics, nearby outdoor microbiomes, and connectedness with other lines. Microbial diversities and assemblages also varied depending on the day sampled, as well as the time of day, and changes in microbial communities between peak and nonpeak commuting hours were attributed largely to increases in skin-associated genera in peak samples. Microbial diversities within the subway were influenced by temperature and relative humidity, while carbon dioxide levels showed a positive correlation with abundances of commuter-associated genera. This Hong Kong data set and communities from previous studies conducted in the United States formed distinct community clusters, indicating that additional work is required to unravel the mechanisms that shape subway microbiomes around the globe.

Temporal variability of the bioaerosol background at a subway station: concentration level, size distribution, and diversity of airborne bacteria

Naturally occurring bioaerosol environments may present a challenge to biological detection-identification-monitoring (BIODIM) systems aiming at rapid and reliable warning of bioterrorism incidents. One way to improve the operational performance of BIODIM systems is to increase our understanding of relevant bioaerosol backgrounds. Subway stations are enclosed public environments which may be regarded as potential bioterrorism targets. This study provides novel information concerning the temporal variability of the concentration level, size distribution, and diversity of airborne bacteria in a Norwegian subway station. Three different air samplers were used during a 72-h sampling campaign in February 2011. The results suggested that the airborne bacterial environment was stable between days and seasons, while the intraday variability was found to be substantial, although often following a consistent diurnal pattern. The bacterial levels ranged from not detected to 10(3) CFU m(-3) and generally showed increased levels during the daytime compared to the nighttime levels, as well as during rush hours compared to non-rush hours. The airborne bacterial levels showed rapid temporal variation (up to 270-fold) on some occasions, both consistent and inconsistent with the diurnal profile. Airborne bacterium-containing particles were distributed between different sizes for particles of >1.1 μm, although ∼50% were between 1.1 and 3.3 μm. Anthropogenic activities (mainly passengers) were demonstrated as major sources of airborne bacteria and predominantly contributed 1.1- to 3.3-μm bacterium-containing particles. Our findings contribute to the development of realistic testing and evaluation schemes for BIODIM equipment by providing information that may be used to simulate operational bioaerosol backgrounds during controlled aerosol chamber-based challenge tests with biological threat agents.

Real-time monitoring of bioaerosols via cell-lysis by air ion and ATP bioluminescence detection

In this study, we introduce a methodology for disrupting cell membranes with air ions coupled with ATP bioluminescence detection for real-time monitoring of bioaerosol concentrations. A carbon fiber ionizer was used to extract ATP from bacterial cells for generating ATP bioluminescence. Our methodology was tested using Staphylococcus epidermidis and Escherichia coli, which were aerosolized with an atomizer, and then indoor bioaerosols were also used for testing the methodology. Bioaerosol concentrations were estimated without culturing which requires several days for colony formation. Correlation equations were obtained for results acquired using our methodology (Relative Luminescent Unit (RLU)/m(3)) and a culture-based (Colony Forming Unit (CFU)/m(3)) method; CFU/m(3)=1.8 × measured RLU/m(3) for S. epidermidis and E. coli, and CFU/m(3)=1.1 × measured RLU/m(3) for indoor bioaerosols under the experimental conditions. Our methodology is an affordable solution for rapidly monitoring bioaerosols due to rapid detection time (cell-lysis time: 3 min; bioluminescence detection time: <1 min) and easy operation.

Characterization of biological aerosol exposure risks from automobile air conditioning system

Although use of automobile air conditioning (AC) was shown to reduce in-vehicle particle levels, the characterization of its microbial aerosol exposure risks is lacking. Here, both AC and engine filter dust samples were collected from 30 automobiles in four different geographical locations in China. Biological contents (bacteria, fungi, and endotoxin) were studied using culturing, high-throughput gene sequence, and Limulus amebocyte lysate (LAL) methods. In-vehicle viable bioaerosol concentrations were directly monitored using an ultraviolet aerodynamic particle sizer (UVAPS) before and after use of AC for 5, 10, and 15 min. Regardless of locations, the vehicle AC filter dusts were found to be laden with high levels of bacteria (up to 26,150 CFU/mg), fungi (up to 1287 CFU/mg), and endotoxin (up to 5527 EU/mg). More than 400 unique bacterial species, including human opportunistic pathogens, were detected in the filter dusts. In addition, allergenic fungal species were also found abundant. Surprisingly, unexpected fluorescent peaks around 2.5 μm were observed during the first 5 min use of AC, which was attributed to the reaerosolization of those filter-borne microbial agents. The information obtained here can assist in minimizing or preventing the respiratory allergy or infection risk from the use of automobile AC system.

Characteristics of antibiotic resistance of airborne Staphylococcus isolated from metro stations

This study focused on the presence of antibiotic-resistant bacteria in a metro system as an example of a public transportation system. The molecular characteristics of Staphylococcus were investigated to discern which strains were isolated from metro stations in Shanghai. These were compared with strains isolated from hospital treatment rooms and parks. Airborne Staphylococcus samples in the metro were resistant to an average of 2.64 antibiotic types, and 58.0% of the strain samples were resistant to at least three antibiotics; this was a significantly higher rate than strains from the park, but was lower than those from hospitals. The presence of two antibiotic resistance genes of Staphylococcus strains, mecA (28.0%) and qac (40.0%), were also found at significantly higher levels in metro samples than park samples, but did not differ significantly from hospital samples. Furthermore, 22.0% of the metro Staphylococcus samples were found to be biofilm-positive. The high rate of antibiotic resistance found in Staphylococcus samples collected from metro stations, and the discovery of antibiotic-resistant genes, indicate that the closed indoor environment and crowded passengers may accelerate the spread of antibiotic resistant strains. More attention should be paid to the inspection and control of antibiotic resistant strains in public transportation systems.

Indoor exposure to airborne endotoxin: a review of the literature on sampling and analysis methods

Assessment of exposure to airborne endotoxins has been studied for several years, especially in occupational environments, but a large number of procedures are used for sampling and analysis. This lack of standardization makes it very difficult to compare results and set internationally accepted threshold limit values (TLVs) or occupational exposure limits (OELs) for endotoxin exposure. This paper reviews the methods reported, using advanced bibliographical search techniques: 82 papers published from 2004 to the present were selected to analyze methods for the assessment of human exposure to airborne endotoxins, with particular reference to occupational settings, and to examine their performance and critical points. Only few studies have focused on the standardization of sampling and analysis methods. The European Committee for Standardization Guidelines coincide with the procedures most frequently applied, but this does not guarantee the best results in terms of recovery and reproducibility. The factor that mainly affects endotoxin measurements is the extraction method, the main concern being the presence in the samples of a fraction insoluble in aqueous media. If substantial differences in the proportions of this fraction in different environments are confirmed in the future, the contribution of insoluble endotoxins cannot be neglected.

Pyroglyphid mites as a source of work-related allergens

Pyroglyphid mites are primarily associated with allergen exposure at home; hence the name house dust mites. However, we have found numerous studies reporting pyroglyhid mite levels in public and occupational settings. This review presents the findings of house dust mite allergens (family Pyroglyphidae, species Dermatophagoides) as potential work-related risk factors and proposes occupations at risk of house dust mite-related diseases. Pyroglyphid mites or their allergens are found in various workplaces, but clinically relevant exposures have been observed in hotels, cinemas, schools, day-care centres, libraries, public transportation (buses, trains, taxies, and airplanes), fishing-boats, submarines, poultry farms, and churches. Here we propose a classification of occupational risk as low (occasional exposure to mite allergen levels up to 2 μg g(-1)), moderate (exposure between 2 μg g(-1) and 10 μg g(-1)), and high (exposure >10 μg g(-1)). The classification of risk should include factors relevant for indoor mite population (climate, building characteristics, and cleaning schedule). To avoid development or aggravation of allergies associated with exposure to house dust mites at work, occupational physicians should assess exposure risk at work, propose proper protection, provide vocational guidance to persons at risk and conduct pre-employment and periodic examinations to diagnose new allergy cases. Protection at work should aim to control dust mite levels at work. Measures may include proper interior design and regular cleaning and building maintenance.

Bioaerosols in residential micro-environments in low income countries: a case study from Pakistan

Our knowledge of the concentrations of bioaerosols in residential micro-environments in low income countries is scanty. The present investigation was conducted to assess the culturable concentration and size distribution of bacteria, gram negative bacteria and fungi in two rural and an urban site in Pakistan. The highest indoor culturable bacteria concentration was found at Rural Site II (14,650 CFU/m3) while the outdoor maximum occurred at the urban site (16,416 CFU/m3). With reference to fungi, both indoor and outdoor concentrations were considerably higher at Rural Site I than the other sites. The size distribution of culturable bacteria at all sites showed greater variability than that of culturable fungi. At all sites more than the half (55-93%) of the culturable bacterial and fungal counts were observed in the respirable fraction (<4.7 μm) and so had the potential to penetrate into lower respiratory system.

Characterization of airborne bacteria at an underground subway station

The reliable detection of airborne biological threat agents depends on several factors, including the performance criteria of the detector and its operational environment. One step in improving the detector's performance is to increase our knowledge of the biological aerosol background in potential operational environments. Subway stations are enclosed public environments, which may be regarded as potential targets for incidents involving biological threat agents. In this study, the airborne bacterial community at a subway station in Norway was characterized (concentration level, diversity, and virulence- and survival-associated properties). In addition, a SASS 3100 high-volume air sampler and a matrix-assisted laser desorption ionization-time of flight mass spectrometry-based isolate screening procedure was used for these studies. The daytime level of airborne bacteria at the station was higher than the nighttime and outdoor levels, and the relative bacterial spore number was higher in outdoor air than at the station. The bacterial content, particle concentration, and size distribution were stable within each environment throughout the study (May to September 2010). The majority of the airborne bacteria belonged to the genera Bacillus, Micrococcus, and Staphylococcus, but a total of 37 different genera were identified in the air. These results suggest that anthropogenic sources are major contributors to airborne bacteria at subway stations and that such airborne communities could harbor virulence- and survival-associated properties of potential relevance for biological detection and surveillance, as well as for public health. Our findings also contribute to the development of realistic testing and evaluation schemes for biological detection/surveillance systems by providing information that can be used to mimic real-life operational airborne environments in controlled aerosol test chambers.