Biosurfactant production by yeasts isolated from hydrocarbon polluted environments

Biosurfactants production by marine yeasts isolated from zoanthids and characterization of an emulsifier produced by Yarrowia lipolytica LMS 24B

The present study investigates the potential for biosurfactant production of 19 marine yeast species obtained from zoanthids. Using the emulsification index test to screen the samples produced by the marine yeasts, we verified that five isolates exhibited an emulsification index ≥50%. Additional tests were performed on such isolates, including oil displacement, drop collapse, Parafilm M assay, and surface tension measurement. The tolerance of produced biosurfactants for environmental conditions was also analyzed, especially considering the media's temperature, pH, and salinity. Moreover, the surfactant's ability to emulsify different hydrocarbon sources and to metabolize kerosene as the sole carbon source was evaluated in vitro. Our results demonstrate that yeast biosurfactants can emulsify hydrocarbon sources under different physicochemical conditions and metabolize kerosene as a carbon source. Considering the Yarrowia lipolytica LMS 24B as the yeast model for biosurfactant production from the cell's wall biomass, emulsification indexes of 61.2% were obtained, even at a high temperature of 120 °C. Furthermore, the Fourier-transform middle infrared spectroscopy (FTIR) analysis of the biosurfactant's chemical composition revealed the presence of distinct functional groups assigned to a glycoprotein complex. Considering the status of developing new bioproducts and bioprocesses nowadays, our findings bring a new perspective to biosurfactant production by marine yeasts, especially Y. lipolytica LMS 24B. In particular, the presented results validate the relevance of marine environments as valuable sources of genetic resources, i.e., yeast strains capable of metabolizing and emulsifying petroleum derivatives.

Microbial surfactants: characteristics, production and broader application prospects in environment and industry

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

Synergistic remediation of phenanthrene-cadmium co-contaminants by an immobilized acclimated bacterial-fungal consortium and its community response

Bioremediation has tremendous potential to mitigate the serious threats posed by polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs). In the present study, nine bacterial-fungal consortia were progressively acclimated under different culture conditions. Among them, a microbial consortium 1, originating from activated sludge and copper mine sludge microorganisms, was developed through the acclimation of a multi-substrate intermediate (catechol)-target contaminant (Cd²⁺, phenanthrene (PHE)). Consortium 1 exhibited the best PHE degradation, with an efficiency of 95.6% after 7 d of inoculation, and its tolerance concentration for Cd²⁺ was up to 1800 mg/L within 48 h. Bacteria Pandoraea and Burkholderia-Caballeronia-Paraburkholderia, as well as fungi Ascomycota and Basidiomycota predominated in the consortium 1. Furthermore, a biochar-loaded consortium was constructed to better cope with the co-contamination behavior, which exhibited excellent adaptation to Cd²⁺ ranging of 50-200 mg/L. Immobilized consortium efficiently degraded 92.02-97.77% of 50 mg/L PHE within 7 d while removing 93.67-99.04% of Cd²⁺. In remediation of co-pollution, immobilization technology improved the bioavailability of PHE and dehydrogenase activity of the consortium to enhance PHE degradation, and the phthalic acid pathway was the main metabolic pathway. As for Cd²⁺ removal, oxygen-containing functional groups (-OH, C=O, and C-O) of biochar or microbial cell walls and EPS components, fulvic acid and aromatic proteins, participated through chemical complexation and precipitation. Furthermore, immobilization led to more active consortium metabolic activity during the reaction, and the community structure developed in a more favorable direction. The dominant species were Proteobacteria, Bacteroidota, and Fusarium, and the predictive expression of functional genes corresponding to key enzymes was elevated. This study provides a basis for combining biochar and acclimated bacterial-fungal consortia for co-contaminated site remediation.

Biosurfactant production prospects of a Gram-negative bacterium-Klebsiella pneumoniae ssp. ozaenae BK34

Increasing environmental concerns have brought natural surfactant produced by microorganisms into limelight due to their lesser toxicity, biodegradable nature, and retention of activity at extreme conditions. In the present investigation, the surfactant production perspective of capsulated Gram-negative bacilli Klebsiella pneumoniae ssp. ozaenae BK34 was explored. It was identified on the basis of PCR amplification of conserved region of 16SrRNA using species specific primers. Highest oil displacement and emulsification (E₂₄) index of 6.8 cm and 20% along with 4.38-fold increase in biomass were attained using olive oil (2% (v/v)) as substrate. Incorporation of urea at 0.5% (w/v) concentration increased the oil displacement, E₂₄ index, and drop diameter to 9.2 cm, 77.50%, and 0.80 cm, respectively, accompanied by 5.38-fold increase in biomass production. Biosurfactant level was recorded maximum at 30 °C as apparent from the oil displacement of 9.3 cm and E₂₄ index of 75%. Reduction in incubation temperature to 25 °C abated oil displacement (5.2 cm) and E₂₄ index (17.66%). Biosurfactant production was also appeared to be pH sensitive as shifting pH from 7.0 to 6.0 or 8.0 reduced the E₂₄ index from 75 to 35% and 25%, respectively. Inoculum of stationary phase bacterial biomass at the proportion of 0.05% (w/v) was found adequate in triggering maximum biosurfactant production while the log phase biomass delayed the production significantly. Acid precipitation method was able to yield 7 g/L biosurfactant at pH 2. The surfactant was allocated to glycolipopeptide class on the basis of FTIR spectroscopy.

A critical review on various feedstocks as sustainable substrates for biosurfactants production: a way towards cleaner production

The quest for a chemical surfactant substitute has been fuelled by increased environmental awareness. The benefits that biosurfactants present like biodegradability, and biocompatibility over their chemical and synthetic counterparts has contributed immensely to their popularity and use in various industries such as petrochemicals, mining, metallurgy, agrochemicals, fertilizers, beverages, cosmetics, etc. With the growing demand for biosurfactants, researchers are looking for low-cost waste materials to use them as substrates, which will lower the manufacturing costs while providing waste management services as an add-on benefit. The use of low-cost substrates will significantly reduce the cost of producing biosurfactants. This paper discusses the use of various feedstocks in the production of biosurfactants, which not only reduces the cost of waste treatment but also provides an opportunity to profit from the sale of the biosurfactant. Furthermore, it includes state-of-the-art information about employing municipal solid waste as a sustainable feedstock for biosurfactant production, which has not been simultaneously covered in many published literatures on biosurfactant production from different feedstocks. It also addresses the myriad of other issues associated with the processing of biosurfactants, as well as the methods used to address these issues and perspectives, which will move society towards cleaner production.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Biosurfactant production from newly isolated Rhodotorula sp.YBR and its great potential in enhanced removal of hydrocarbons from contaminated soils

One of the very promising methods in the field of bioremediation of hydrocarbons is the application of biosurfactant- producing microorganisms based on the use of wastewater as renewable substrates of culture media, contributing to the reduction of costs. With this aim, the production, characterization and properties of the yeast strain YBR producing a biosurfactant newly isolated from an oilfield in Algeria, using wastewater from olive oil mills (OOMW) as a substrate for a low-cost and effective production, have been investigated. Screening of biosurfactant production was carried out with different tests, including emulsification index test (E24), drop collapse test, oil spreading technique and measurement of surface tension (ST). The isolated yeast strain was found to be a potent biosurfactant producer with E24 = 69% and a significant reduction in ST from 72 to 35 mN m^-1. The study of the cultural, biochemical, physiological and genetic characteristics of the isolate allowed us to identify it as Rhodotorula sp. strain YBR. Fermentation was carried out in a 2.5 L Minifors Bioreactor using crude OOMW as culture medium, the E₂₄ value reached 90% and a reduction of 72 to 35 mN m^-1 in ST. A biosurfactant yield = 10.08 ± 0.38 g L^-1 was recorded. The characterization by semi-purification and thin layer chromatography (TLC) of the crude extract of biosurfactant showed the presence of peptides, carbohydrates and lipids in its structure. The crude biosurfactant exhibited interesting properties such as: low critical micellar concentration (CMC), significant reduction in ST and strong emulsifying activity. In addition, it has shown stability over a wide range of pH (2-12), temperature (4-100 °C) and salinity (1-10%). More interestingly, the produced biosurfactant has proven to be of great potential application in the remobilization of hydrocarbons from polluted soil with a removal rate of greater than 95%.

Process parameters for biosurfactant production using yeast Meyerozyma guilliermondii YK32

Microbially produced biosurfactants are fast catching up due to their environment-friendly approach over chemical surfactants. But their commercial production is restricted due to poor economy of the production process which could be improved by using high yielding microbial strains and optimizing the process parameters. The present research was directed to optimize the biosurfactant production monitored in terms of oil displacement and emulsification (E₂₄) index, using a promising yeast Meyerozyma guilliermondii YK32. Maximum oil displacement equaling 7.5 cm was obtained with olive oil at 8% (v/v) concentration as carbon source under shaking conditions (150 rpm). Diesel being a complex hydrocarbon was not utilized easily by yeast and showed poor biosurfactant production. Yeast extract at 1.5% (w/v) concentration yielded maximum biosurfactant as evident from maximum oil displacement and E₂₄ index equal to 8.1 cm and 52.6%, respectively. Sodium chloride at the rate of 3% (w/v) supported maximum oil displacement (8.8 cm) using the production broth containing optimized carbon and nitrogen sources. Any increase beyond this level negatively influenced the biosurfactant production. The yield was at its maximum at 30 °C as a shift in temperature either to 35 °C or 25 °C decreased the oil displacement from 8.8 to 5.2 or 7.6 cm, respectively. At 40 °C, oil displacement was decreased to 2.5 cm. Biosurfactant production appeared to be sensitive to varying pH as evident from the E₂₄ index as high as 67.3% at pH 6.0 as compared with 60.2%, 60.1%, and 52.4% at pH 5.0, 5.5, and 7.0, respectively. Yeast biomass yield equivalent to 10.3 g/L and 8.3 g/L was recorded at pH 6 and 7, respectively, during the production process. Elimination of shaking reduced the E₂₄ index from 67.3 to 34.8% under optimized conditions.

Candida pseudoglaebosa and Kodamaea ohmeri are capable of degrading alkanes in the presence of heavy metals

The aim of this study was to examine four strains of two yeast species in relation to their capability for assimilating alkanes in the presence of heavy metals (HMs). The four strains tested were Candida pseudoglaebosa ENCB-7 and Kodamaea ohmeri ENCB-8R, ENCB-23, and ENCB-VIK. Determination was made of the expression of CYP52 genes involved in alkane hydroxylation. When exposed to Cu²⁺ , Zn²⁺ , Pb²⁺ , Cd²⁺ , and As³⁺ at pH 3 and 5, all four strains could assimilate several n-alkanes having at least six carbon atoms. The three K. ohmeri strains could also utilize branched alkanes, cycloalkanes, and n-octanol as sole carbon sources. Kinetic assays demonstrated greater biomass production and specific growth of the yeasts exposed to long-chain n-alkanes. Fragments of paralogous CYP52 genes of C. pseudoglaebosa ENCB-7 and K. ohmeri ENCB-23 were amplified, sequenced, and phylogenetically evaluated. Reverse-transcription polymerase chain reaction revealed that n-nonane and n-decane induced to CpCYP52-G3, CpCYP52-G9, and CpCYP52-G10. KoCYP52-G3 was induced with n-decane and n-octanol. Also, CpCYP52-G3 and CpCYP52-G9 were induced by glucose. In conclusion, C. pseudoglaebosa and K. ohmeri were able to degrade several alkanes in the presence of HMs and under acidic conditions. These yeasts harbor paralogous alkane-induced CYP52 genes, which display different profiles of transcriptional expression.

Biosynthesis and characterization of sophorolipid biosurfactant by Candida spp.: Application as food emulsifier and antibacterial agent

Biosurfactants from the yeast strains Candida albicans SC5314 and Candida glabrata CBS138 were isolated and characterized. Surface tension of the cell-free broth was reduced from 72 N/m to 42 N/m and 55 N/m respectively. The biosurfactants showed emulsifying ability as the indices against castor oil were determined to be 51% and 53% for C. albicans and C. glabrata respectively and were found stable between pH 2 and 10, temperature 4-120 °C and salt concentration 2-14%. The partially purified surfactants were identified as sophorolipid using Fourier transform infrared spectroscopy. Isolated sophorolipid showed antibacterial properties against pathogenic bacteria and generated reactive oxygen species in Bacillus subtilis and Escherichia coli. Flow cytometric analysis revealed that 60 mg/L of C. glabrata biosurfactant killed 65.8% B. subtilis and 4% E. coli. The data here obtained indicates applications of biosurfactant focusing mainly as antimicrobial and therapeutic perspectives.

Candida pseudoglaebosa and Kodamaea ohmeri are capable of degrading alkanes in the presence of heavy metals

The aim of this study was to examine four strains of two yeast species in relation to their capability for assimilating alkanes in the presence of heavy metals (HMs). The four strains tested were Candida pseudoglaebosa ENCB-7 and Kodamaea ohmeri ENCB-8R, ENCB-23, and ENCB-VIK. Determination was made of the expression of CYP52 genes involved in alkane hydroxylation. When exposed to Cu2+ , Zn2+ , Pb2+ , Cd2+ , and As3+ at pH 3 and 5, all four strains could assimilate several n-alkanes having at least six carbon atoms. The three K. ohmeri strains could also utilize branched alkanes, cycloalkanes, and n-octanol as sole carbon sources. Kinetic assays demonstrated greater biomass production and specific growth of the yeasts exposed to long-chain n-alkanes. Fragments of paralogous CYP52 genes of C. pseudoglaebosa ENCB-7 and K. ohmeri ENCB-23 were amplified, sequenced, and phylogenetically evaluated. Reverse-transcription polymerase chain reaction revealed that n-nonane and n-decane induced to CpCYP52-G3, CpCYP52-G9, and CpCYP52-G10. KoCYP52-G3 was induced with n-decane and n-octanol. Also, CpCYP52-G3 and CpCYP52-G9 were induced by glucose. In conclusion, C. pseudoglaebosa and K. ohmeri were able to degrade several alkanes in the presence of HMs and under acidic conditions. These yeasts harbor paralogous alkane-induced CYP52 genes, which display different profiles of transcriptional expression.