Assessing pollution and risk of polycyclic aromatic hydrocarbons in sewage sludge from wastewater treatment plants in China's top coal-producing region

Occurrence, spatiotemporal trends, fate, and treatment technologies for microplastics and organic contaminants in biosolids: A review

This review provides a comprehensive overview of the occurrence, fate, treatment and multi-criteria analysis of microplastics (MPs) and organic contaminants (OCs) in biosolids. A meta-analysis was complementarily analysed through the literature to map out the occurrence and fate of MPs and 10 different groups of OCs. The data demonstrate that MPs (54.7% occurrence rate) and linear alkylbenzene sulfonate surfactants (44.2% occurrence rate) account for the highest prevalence of contaminants in biosolids. In turn, dioxin, polychlorinated biphenyls (PCBs) and phosphorus flame retardants (PFRs) have the lowest rates (<0.01%). The occurrence of several OCs (e.g., dioxin, per- and polyfluoroalkyl substances, polycyclic aromatic hydrocarbons, pharmaceutical and personal care products, ultraviolet filters, phosphate flame retardants) in Europe appear at higher rates than in Asia and the Americas. However, MP concentrations in biosolids from Australia are reported to be 10 times higher than in America and Europe, which required more measurement data for in-depth analysis. Amongst the OC groups, brominated flame retardants exhibited exceptional sorption to biosolids with partitioning coefficients (log Kd) higher than 4. To remove these contaminants from biosolids, a wide range of technologies have been developed. Our multicriteria analysis shows that anaerobic digestion is the most mature and practical. Thermal treatment is a viable option; however, it still requires additional improvements in infrastructure, legislation, and public acceptance.

Occurrence and emission of polycyclic aromatic hydrocarbons from water treatment plant sludge in Taiwan

The concentrations level and distribution of 16 US EPA polycyclic aromatic hydrocarbon (PAHs) from the water treatment plant (WTP), sewage treatment plant (STP), and industrial water treatment plant (ITP) sludge in Taiwan were determined and then assessed the sources, and potential toxicity (carcinogenic polycyclic aromatic hydrocarbons [CPAHs] and toxic BaP equivalent [TEQ]). Results indicated that the total concentrations of PAHs ranged between 58 and 16,436 μg/kg dw. Among the 17 samples, the 2-4 ring of total PAHs were the predominant compound in three kinds of treatment plant (> 60%). Especially, ITP1 owns 95.8% of 2-4 ring of total PAHs and ITP3 owns 54% of five- and six-ring of total PAHs. The molecular indices and principal component analysis (PCA) were used to determine the source contributions, with the results showing that the contributions of combustion/grass, coal or wood combustion and combustion/ liquid (oil) fossil fuel combustion. A PAH toxicity indicated by TEQ was 2.5-506 μg TEQ/g dw. Although, the results indicated that these were not recommended for land applications, but analyses are beneficial to develop effective management strategies for controlling PAH discharge in treatment plants and establishing strategies for its reuse in managing pollutants.

Sources and composition of natural and anthropogenic hydrocarbons in sediments from an impacted estuary

Hydrocarbons in estuarine sediments provide information on sources of sedimentary organic matter (OM), and they are thus useful for tracing natural and anthropogenic OM inputs to the estuary. Here, we assessed the amounts, compositions and sources of natural and anthropogenic hydrocarbons from the sediments of a large, ecologically important estuary, Mobile Bay in Southeast USA. TOC/TN ratios and δ¹³C of organic carbon suggest that the bulk natural OM was sourced from marine phytoplankton and bacteria mixed with marsh and terrigenous C3 plants. Normal alkanes show high proportions of long-chain compounds with a high Carbon Preference Index, indicating the importance of C3 plants-derived OM in Mobile Bay. High concentrations of biogenic hopanes and perylene indicate microbial sources and degradation played an important role in shaping OM compositions. Anthropogenic hydrocarbons, αβ-hopanes and polycyclic aromatic hydrocarbons (PAHs), were widely detected in Mobile Bay sediments. The source diagnostic ratios of hopanes and steranes suggest they were sourced from coal and diesel combustions. The source diagnostic ratios of PAHs, together with a positive correlation between PAHs and total mercury, suggests that PAHs originated primarily from coal combustion. We proposed two ratios, αβ-hopanes/(ββ-hopanes+hopenes) and 16 PAHs/perylene, to evaluate anthropogenic versus natural contributions of hydrocarbons. These ratios were higher in the western estuary than in the eastern estuary, suggesting elevated anthropogenic hydrocarbon inputs to the western estuary. Correspondingly, the toxic equivalent quantity (TEQ_BaQ) of PAHs showed a higher ecological risk for the western estuary. This spatially uneven distribution of hydrocarbon pollutants can be attributed to more concentrated urban and industrial areas on the western shore, suggesting the importance of adjacent pollution sources. Collectively, our results provide new insights into the origins and dynamics of natural and anthropogenic OM and highlight the significance of coal combustion in contributing hydrocarbon pollutants in Mobile Bay sediments.

Evolution and Prospects in Managing Sewage Sludge Resulting from Municipal Wastewater Purification

Municipal sewage sludge is the residual material produced as a waste of municipal wastewater purification. It is a sophisticated multi-component material, hard to handle. For many years, it has been landfilled, incinerated, and widely used in agriculture practice. When unproperly discharged, it is very polluting and unhealthy. The rapidly increasing global amount of municipal sewage sludge produced annually depends on urbanization, degree of development, and lifestyle. Some diffused traditional practices were banned or became economically unfeasible or unacceptable by the communities. In contrast, it has been established that MSS contains valuable resources, which can be utilized as energy and fertilizer. The objective of the review was to prove that resource recovery is beneficially affordable using modern approaches and proper technologies and to estimate the required resources and time. The open sources of information were deeply mined, critically examined, and selected to derive the necessary information regarding each network segment, from the source to the final point, where the municipal sewage sludge is produced and disposed of. We found that developed and some developing countries are involved with ambitious and costly plans for remediation, the modernization of regulations, collecting and purification systems, and beneficial waste management using a modern approach. We also found that the activated sludge process is the leading technology for wastewater purification, and anaerobic digestion is the leading technology for downstream waste. However, biological technologies appear inadequate and hydrothermal carbonization, already applicable at full scale, is the best candidate for playing a significant role in managing municipal sewage sludge produced by big towns and small villages.

Shifts in microbial community structure and function in polycyclic aromatic hydrocarbon contaminated soils at petrochemical landfill sites revealed by metagenomics

Investigations of the microbial community structures, potential functions and polycyclic aromatic hydrocarbon (PAH) degradation-related genes in PAH-polluted soils are useful for risk assessments, microbial monitoring, and the potential bioremediation of soils polluted by PAHs. In this study, five soil sampling sites were selected at a petrochemical landfill in Beijing, China, to analyze the contamination characteristics of PAHs and their impact on microorganisms. The concentrations of 16 PAHs were detected by gas chromatography-mass spectrometry. The total concentrations of the PAHs ranged from ND to 3166.52 μg/kg, while phenanthrene, pyrene, fluoranthene and benzo [ghi]perylene were the main components in the soil samples. According to the specific PAH ratios, the PAHs mostly originated from petrochemical wastes in the landfill. The levels of the total toxic benzo [a]pyrene equivalent (1.63-107.73 μg/kg) suggested that PAHs might result in adverse effects on soil ecosystems. The metagenomic analysis showed that the most abundant phyla in the soils were Proteobacteria and Actinobacteria, and Solirubrobacter was the most important genus. At the genus level, Bradyrhizobium, Mycobacterium and Anaeromyxobacter significantly increased under PAH stress. Based on the Kyoto Encyclopedia of Genes and Genomes (KEGG) annotations, the most abundant category of functions that are involved in adapting to contaminant pressures was identified. Ten PAH degradation-related genes were significantly influenced by PAH pressure and showed correlations with PAH concentrations. All of the results suggested that the PAHs from the petrochemical landfill could be harmful to soil environments and impact the soil microbial community structures, while microorganisms would change their physiological functions to resist pollutant stress.

Treatment processes to eliminate potential environmental hazards and restore agronomic value of sewage sludge: A review

Land application of sewage sludge is increasingly used as an alternative to landfilling and incineration owing to a considerable content of carbon and essential plant nutrients in sewage sludge. However, the presence of chemical and biological contaminants in sewage sludge poses potential dangers; therefore, sewage sludge must be suitably treated before being applied to soils. The most common methods include anaerobic digestion, aerobic composting, lime stabilization, incineration, and pyrolysis. These methods aim at stabilizing sewage sludge, to eliminate its potential environmental pollution and restore its agronomic value. To achieve best results on land, a comprehensive understanding of the transformation of organic matter, nutrients, and contaminants during these sewage-sludge treatments is essential; however, this information is still lacking. This review aims to fill this knowledge gap by presenting various approaches to treat sewage sludge, transformation processes of some major nutrients and pollutants during treatment, and potential impacts on soils. Despite these treatments, overtime there are still some potential risks of land application of treated sewage sludge. Potentially toxic substances remain the main concern regarding the reuse of treated sewage sludge on land. Therefore, further treatment may be applied, and long-term field studies are warranted, to prevent possible adverse effects of treated sewage sludge on the ecosystem and human health and enable its land application.

Genomic and functional potential of the immobilized microbial consortium MCSt-1 for wastewater treatment

Treatment of wastewater prior to release in water bodies is an imperative need of the current time to address the global water crises. Thus, consortium MCSt-1 was designed for an effective wastewater treatment based on its cellulolytic, proteolytic, lipolytic, phenol and sodium dodecyl sulfate degrading activities along with effective nutrient removal capacity. Performance of the designed consortium was assayed using two differently configured lab-scale bioreactors as subjected to immobilization on two different matrices (pebbles and nylon mesh). Consortium MCSt-1 proficiently removes soluble chemical oxygen demand, nitrate, ammonia and phosphorus with 83%, 67%, 76%, and 62% removal efficiency, respectively. The immobilization on a mesh is recommended as it exhibited better biofilm formation, hence results in significant organic load and nutrient removal. The functional potential of the consortium MCSt-1 explored through genome characterization and reveal the presence of genes responsible for phosphorus metabolism and removal (pst operon and ppk), ammonia assimilation (amt), and nitrate; nitrite reductase (nar, nir, nor). Additionally, consortium members also annotated with the phenol, catechol and benzoate degradation, stress response, heavy metal and antibiotics resistance genes. Hence, the designed consortium MCSt-1 can withstand the harsh condition of treatment plants and serves as the best solution for enhancing wastewater treatment efficiency.

Determination of Polycyclic Aromatic Hydrocarbons and Their Methylated Derivatives in Sewage Sludge from Northeastern China: Occurrence, Profiles and Toxicity Evaluation

This paper assesses the occurrence, distribution, source, and toxicity of polycyclic aromatic hydrocarbons (PAHs), and their methylated form (Me-PAHs) in sewage sludge from 10 WWTPs in Northeastern China was noted. The concentrations of ∑PAHs, ∑Me-PAHs ranged from 567 to 5040 and 48.1 to 479 ng.g−1dw, which is greater than the safety limit for sludge in agriculture in China. High and low molecular weight 4 and 2-ring PAHs and Me-PAHs in sludge were prevalent. The flux of sludge PAHs and Me-PAHs released from ten WWTPs, in Heilongjiang province, was calculated to be over 100 kg/year. Principal component analysis (PCA), diagnostic ratios and positive matrix factorization (PMF) determined a similar mixed pyrogenic and petrogenic source of sewage sludge. The average values of Benzo[a]pyrene was below the safe value of 600 ng.g−1 dependent on an incremental lifetime cancer risk ILCR of 10⁻⁶. Sludge is an important source for the transfer of pollutants into the environment, such as PAHs and Me-PAHs. Consequently, greater consideration should be given to its widespread occurrence.

China's industrial gray water footprint assessment and implications for investment in industrial wastewater treatment

Industrial wastewater is the largest contributor of toxic pollutants and third-largest contributor of nutrients to bodies of water in China, and understanding the characteristics of such pollution is important for water pollution control. In this study, the industrial gray water footprint (GWF) of each industry sector in China's 31 provinces in 2015 was calculated to identify the pollution characteristics of industrial wastewater discharge and determine how to efficiently allocate investment to pollution reduction. We show that the total industrial GWF of China was 300 billion m³ in 2015 and that the major pollutants were petroleum pollutant (PP), ammonia nitrogen (NH₃-N), volatile phenol (VP), and chemical oxygen demand (COD). The water pollution level (WPL) was higher than 1 in Ningxia, Shanxi, Hebei, Tianjin, Shanghai, Henan, and Shandong, indicating that industrial pollution exceeded the carrying capacity of local water bodies in these seven regions. Given equivalent total investment, a scenario that takes the total reduction of the industrial GWF weighted by the WPL in each region as the investment target can better allocate funds to control industrial wastewater pollution in regions with high WPLs relative to a scenario in which investment targets the reduction of the unweighted total industrial GWF. For further industrial GWF reduction in regions with high WPLs, it is crucial to adjust the industrial structure and to upgrade relevant technologies.

Determination of Polycyclic Aromatic Hydrocarbons in Sludge from Water and Wastewater Treatment Plants by GC-MS

The qualitative and quantitative analysis of 16 polycyclic aromatic hydrocarbons (PAHs) in sludge samples from drinking water treatment plants (DWTP) and wastewater treatment plants (WWTP) were established using gas chromatography–mass spectrometry (GC-MS). The method was suitable to quantify PAHs in the sludge of DWTP and WWTP and it was confirmed by the relevant quality assurance/quality control (QA/QC) procedures. The recovery of individual PAHs in the spiked samples ranged from 74.3% to 108.7%. Detection limits of the analytical procedure were 0.0010–0.0046 mg/kg dw for individual PAHs. This method was used to determine the concentration of PAHs in the selected two DWTP and four WWTP sludge samples. The results showed that the total PAHs (∑PAHs) were in low levels which ranged from 0.0668 to 0.1357 mg/kg dw, and 0.5342–1.0666 mg/kg dw for DWTP and WWTP respectively. The 3- & 4-ring PAHs were predominant in DWTP sludge, ranging from 77.4% to 82.7%; the 4-ring PAHs were predominant in WWTP sludge, ranging from 40.7% to 47.6%. The PAHs of DWTP sludge are mainly composed of 3-ring phenanthrene and anthracene and 4-ring pyrene, and chrysene. The PAHs of WWTP sludge are dominated by 4-ring fluoranthene, pyrene, and chrysene. The detected PAHs concentration should be undoubtedly considered for agriculture in sludge applications based on the limits of the EU regulations. The results of this study can be used for regular monitoring to establish a reference for sludge management and application to agriculture.