Study of organic pollution in superficial sediments of Meliane river catchment area: aliphatic and polycyclic aromatic hydrocarbons

Microplastics in sediments from the southern Gulf of Mexico: Abundance, distribution, composition, and adhered pollutants

Approximately 23 Mt of plastics reaches the ocean each year, fragmented into microplastics (MP). MPs are widely dispersed in the sea, becoming deposited in sediments. MPs are considered carriers of pollutants such as heavy metals and polycyclic aromatic hydrocarbons and, when ingested by biota, pose a high health risk. This study determined metals and PAHs in sedimentary microplastics from the southern Gulf of Mexico (GOM). One hundred twenty-four sediment samples were collected, covering an area of 26,220 km². The mean (±SD) of MPs in sediments was 16.46 ± 17.76 MPs/kg. The most abundant polymers were cellophane (CE), polyvinylidene fluoride (PVDF), polyethylene (PE), polyamides (PA), and nylon (NYL). A strong correlation (r: 0.83) was found between MP density and sediment depth. PA and PE were found near shorelines and PVDF near oil platforms. Aluminum, arsenic, and tin had the highest concentration (89.6 ± 94.6, 23.1 ± 70.3, and 19 ± 29.2 μg g^-1, respectively), and acenaphthylene was the PAH with the highest concentration (3.4 ± 12.6 μg g^-1). This study shows that MP with a higher density is found at greater depths, and this research is one of the first to cover a large area of the Gulf of Mexico.

Historical evolution of polycyclic aromatic hydrocarbon pollution in Chaihe Reservoir from 1863 to 2018

Pollution from polycyclic aromatic hydrocarbons (PAHs) spreads and changes worldwide. The pollution evolution in the regional water environment evolves in response to multiple factors, requiring considerable attention. PAH heterogeneity in the sediment core from Chaihe Reservoir was investigated to indicate dynamic changes in PAH pollution levels and sources and propose recommendations for controlling PAHs. Dynamic PAH patterns showed that the overall decline in PAH pollution was in association with local anthropogenic activities, temperature, and precipitation over the period 1863-2018. Nevertheless, coal, oil, and natural gas consumptions still played significant roles in transferring PAHs to the reservoir. Meanwhile, there were dominant local origins, including grass, wood, and coal combustion. The results highlight that the joint action of natural and anthropogenic interventions mitigated PAH pollution in the reservoir. Promoting improved fuels, new energy vehicles, and cleaner energy may further lower PAH pollution.

Potential Utilization of Bacterial Consortium of Symbionts Marine Sponges in Removing Polyaromatic Hydrocarbons and Heavy Metals, Review

Toxic materials in waste generally contain several components of the global trending pollutant category, especially PAHs and heavy metals. Bioremediation technology for waste management that utilizes microorganisms (bacteria) has not been fully capable of breaking down these toxic materials into simple and environmentally friendly chemical products. This review paper examines the potential application of a consortium of marine sponge symbionts with high performance and efficiency in removing PAHs and heavy metal contaminants. The method was carried out through a review of several related research articles by the author and published by other researchers. The results of the study conclude that the development of global trending pollutant (GTP) bioremediation technology could be carried out to increase the efficiency of remediation. Several types of marine sponge symbiont bacteria, hydrocarbonoclastic (R-1), metalloclastic (R-2), and metallo-hydro-carbonoclastic (R-3), have the potential to be applied to improve waste removal performance. A consortium of crystalline bacterial preparations is required to mobilize into GTP-exposed sites rapidly. Bacterial symbionts of marine sponges can be traced mainly to sea sponges, whose body surface is covered with mucus.

Polycyclic Aromatic Hydrocarbons (PAHs) in the Dissolved Phase, Particulate Matter, and Sediment of the Sele River, Southern Italy: A Focus on Distribution, Risk Assessment, and Sources

The Sele River, located in the Campania Region (southern Italy), is one of the most important rivers and the second in the region by average water volume, behind the Volturno River. To understand the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in the Sele River, water sediment samples were collected from areas around the Sele plain at 10 sites in four seasons. In addition, the ecosystem health risk and the seasonal and spatial distribution of PAHs in samples of water and sediment were assessed. Contaminant discharges of PAHs into the sea were calculated at about 1807.9 kg/year. The concentration ranges of 16 PAHs in surface water (DP), suspended particulate matter (SPM), and sediment were 10.1–567.23 ng/L, 121.23–654.36 ng/L, and 331.75–871.96 ng/g, respectively. Isomeric ratio and principal component analyses indicated that the PAH concentrations in the water and sediment near the Sele River were influenced by industrial wastewater and vehicle emissions. The fugacity fraction approach was applied to determine the trends for the water-sediment exchange of 16 priority PAHs; the results indicated that fluxes, for the most part, were from the water into the sediment. The toxic equivalent concentration (TEQ) of carcinogenic PAHs ranged from 137.3 to 292.6 ngTEQ g⁻¹, suggesting that the Sele River basin presents a definite carcinogenic risk.

Organochlorine pesticides, polycyclic aromatic hydrocarbons, metals and metalloids in microplastics found in regurgitated pellets of black vulture from Campeche, Mexico

Plastics are produced by the millions of tons worldwide each year, with their final deposition in landfills (LFs). Plastics deposited in LFs can fragment over time, giving rise to mesoplastics and later to microplastics (MPs), in which toxic chemicals such as heavy metals, organochlorine pesticides, and polycyclic aromatic hydrocarbons can adhere. MPs can be vectors for the exposure to pollutants of black vultures (Coragyps atratus) due to feeding in LFs, resulting in accidental ingestion of MPs. It is also possible that MPs can adsorb pollutants from vultures during the digestion process. The aim of this study was to estimate the risk of black vulture exposure to MPs, heavy metals (HMs), organochlorine pesticides (OCPs) and polycyclic aromatic hydrocarbons (PAHs). Fifty-eight black vulture pellets were collected at the Campeche LF during 2019 (n = 24) and 2020 (n = 34). The pellets, on average, had an MP load per pellet of 6.7 ± 5.8 MPs/total pellets. The greatest abundance of MPs was detected in 2019, with 225 particles in total. The concentrations of Cd, Pb, Cu, Cr, Hg, As, and Al were detected in the MPs, with the greatest average concentration of 35.59 ± 32.39 μg·g^-1 (2019) and 15.82 ± 17.47 μg·g^-1 (2020) for Al. In 2020, ∑endosulfans were present in all MPs at 0.97 ± 1.47 ng·g^-1. Among the PAHs, 15 of the 16 compounds indicated as priorities by the US EPA were quantified. The compound with the greatest total concentration for both years was acenaphthylene (3 rings), with 10.51 ± 7.88 ng·g^-1 (2019) and 10.61 ± 18 ng·g^-1 (2020). More research is needed regarding the origin of the contaminants detected in the MPs extracted from the pellets, since the contaminants may come from the environment or possibly from the digestion processes in the stomach of avian raptors and scavengers.

Anthracene and Pyrene Biodegradation Performance of Marine Sponge Symbiont Bacteria Consortium

Every petroleum-processing plant produces sewage sludge containing several types of polycyclic aromatic hydrocarbons (PAHs). The degradation of PAHs via physical, biological, and chemical methods is not yet efficient. Among biological methods, the use of marine sponge symbiont bacteria is considered an alternative and promising approach in the degradation of and reduction in PAHs. This study aimed to explore the potential performance of a consortium of sponge symbiont bacteria in degrading anthracene and pyrene. Three bacterial species (Bacillus pumilus strain GLB197, Pseudomonas stutzeri strain SLG510A3-8, and Acinetobacter calcoaceticus strain SLCDA 976) were mixed to form the consortium. The interaction between the bacterial consortium suspension and PAH components was measured at 5 day intervals for 25 days. The biodegradation performance of bacteria on PAH samples was determined on the basis of five biodegradation parameters. The analysis results showed a decrease in the concentration of anthracene (21.89%) and pyrene (7.71%), equivalent to a ratio of 3:1, followed by a decrease in the abundance of anthracene (60.30%) and pyrene (27.52%), equivalent to a ratio of 2:1. The level of pyrene degradation was lower than that of the anthracene due to fact that pyrene is more toxic and has a more stable molecular structure, which hinders its metabolism by bacterial cells. The products from the biodegradation of the two PAHs are alcohols, aldehydes, carboxylic acids, and a small proportion of aromatic hydrocarbon components.