Preparation of melon peel biochar/CoFe2O4 as a new adsorbent for the separation and preconcentration of Cu(II), Cd(II), and Pb(II) ions by solid-phase extraction in water and vegetable samples

CoSn(OH)6 nanocubes as a solid sorbent for the effective preconcentration of copper ions in cinnamon (Cinnamomum zeylanicum) extract

This study was aimed at developing a simple and efficient CoSn(OH)6 nanocubes-based preconcentration method for the preconcentration of copper ions from cinnamon extracts for determination by flame atomic absorption spectrometry. The cube-shaped sorbent was synthesized using the simple stoichiometric co-precipitation method under ambient conditions. Experimental factors of the method were evaluated with a comprehensive optimization approach to maximize the extraction efficiency for the analyte. Under the optimal conditions, the limit of detection (LOD), limit of quantitation (LOQ), and linear dynamic range were recorded as 0.98 µg/L, 3.28 µg/L, and 4.0-75 µg/L, respectively. The enhancement factor was calculated as 101.6-fold by comparing the LODs of the optimized and direct analysis systems. Percent recoveries were found to be within an acceptable range (77.6-115 %), with high repeatability using matrix matching calibration strategy. Results validated the proposed method as a highly efficient extraction approach for the monitoring of copper ions in herbal cinnamon extracts.

A comprehensive review on sustainable clay-based geopolymers for wastewater treatment: circular economy and future outlook

In the present era of significant industrial development, the presence and dispersal of countless water contaminants in water bodies worldwide have rendered them unsuitable for various forms of life. Recently, the awareness of environmental sustainability for wastewater treatment has increased rapidly in quest of meeting the global water demand. Despite numerous conventional adsorbents on deck, exploring low-cost and efficient adsorbents is interesting. Clays and clays-based geopolymers are intensively used as natural, alternative, and promising adsorbents to meet the goals for combating climate change and providing low carbon, heat, and power. In this narrative work, the present review highlights the persistence of some inorganic/organic water pollutants in aquatic bodies. Moreover, it comprehensively summarizes the advancement in the strategies associated with synthesizing clays and their based geopolymers, characterization techniques, and applications in water treatment. Furthermore, the critical challenges, opportunities, and future prospective regarding the circular economy are additionally outlined. This review expounded on the ongoing research studies for leveraging these eco-friendly materials to address water decontamination. The adsorption mechanisms of clays-based geopolymers are successfully presented. Therefore, the present review is believed to deepen insights into wastewater treatment using clays and clays-based geopolymers as a groundbreaking aspect in accord with the waste-to-wealth concept toward broader sustainable development goals.

Synthesis and Characterization of Mesoporous Silica Modified with Purpald and Its Application in the Preconcentration of Cu2+ and Cd2+ from Aqueous Samples through Solid-Phase Extraction

The synthesis of an organofunctionalized mesoporous silica was accomplished by a two-step process involving (1) the co-condensation of a silylant agent at the surface of silica, followed by (2) the immobilization of Purpald (ligand) at the organic termination of the silytant agent. The characterization of the organofunctionalized material indicated the presence of NH2 groups, and the immobilization of the ligand was confirmed by 29Si- and 13C-nuclear magnetic resonance. The material’s surface area was determined as 370 m2 g−1. Batch adsorption experiments enabled the determination of optimum pH conditions for the adsorption of Cu(II) and Cd(II). Under optimal pH, the pseudo-second-order kinetic model and Langmuir model provided the best correlations to describe the materials adsorption behavior, suggesting a chemisorption mechanism. When tested in continuous-flow preconcentration experiments, the flow rate and eluent concentration demonstrated to affect the removal of Cu(II) and Cd(II), while the buffer concentration had an effect only over the adsorption of Cu(II). Under optimized preconcentration conditions, it was possible both to determine the concentrations of Cu(II) and Cd(II) in samples such as mineral water, ground water, tap water and river water. Ions commonly found in drinking and natural waters (Na+, K+, Ca2+, Mg2+, Fe3+, Ba2+, Cl−, SO42−, HCO3−, and H2PO4−) did not affect the preconcentration of any of the studied analytes. Reutilization experiments indicated that the adsorbent material can withstand at least 40 adsorption/desorption preconcentration cycles with no efficiency loss.

Insights into brewed tea waste as a green and low-priced adsorbent for solid-phase extraction of Cd(II) ions: isotherm, kinetic, and artificial neural network approach

In the present research, brewed tea waste (BTW) was utilized as a green, low-priced, and abundant adsorbent for separation/preconcentration of Cd(II) ions through solid-phase extraction method from water and foods for the first time. BTW was applied as a natural adsorbent, without using any chelating agent to bind Cd(II) ions or any chemical reagent for its modification. A three-layer artificial neural network model using backpropagation algorithm was utilized to explicate a prediction model for the extraction performance of Cd(II) ions by selecting the input parameters as solution pH, quantity of BTW, sample volume, eluent concentration and volume, and equilibrium time for desorption. The preconcentration factor, relative standard deviation, and detection limit were attained as 100, 3.03%, and 0.56 µg L−1, respectively. It was decided that the Langmuir isotherm model is acceptable to characterize the retention of Cd(II) ions on BTW. This result pointed out that the active binding sites on the BTW surface are homogeneously distributed. Adsorption capacity of BTW was achieved as 41.5 mg g−1 which is higher than several expensive and difficult-to-prepare adsorbents. Adsorption kinetics was elucidated by pseudo-second order kinetic model. After confirmed the accuracy of the method with spike/recovery studies, it was employed for Cd(II) determination in water (stream and sea water) and food (eggplant, lettuce, parsley, apple, and apricot) samples with high accuracy. The inferences of the study proved that the BTW offers a magnificent application prospect in the extraction of Cd(II) ions.

Investigation the adsorption behavior of functional biochar-based porous composite for efficient removing Cu(Ⅱ) in aqueous solution

Biochar was modified by acylation reaction using EDTA. Then, a novel biochar-based porous composite was prepared successfully using modified biochar as base to remove Cu(Ⅱ) in wastewater. In addition, functional...