Synthesis of new ionic β-cyclodextrin polymers and characterization of their heavy metals retention

Cyclodextrin-based nanosponges as promising carriers for active pharmaceutical ingredient

Effective drug distribution at the intended or particular location is a critical issue that researchers are now dealing. Nanosponges have significantly increased in importance in medication delivery using nanotechnology in recent years. An important step toward solving these problems has been the development of nanosponges. Recently created and proposed for use in drug delivery, nanosponge is a unique type of hyper-crosslinked polymer-based colloidal structures made up of solid nanoparticles with colloidal carriers. Nanosponges are solid porous particles that may hold pharmaceuticals and other actives in their nanocavities. They can be made into dosage forms for oral, parenteral, topical, or inhalation use. The targeted distribution of drugs in a regulated manner is greatly aided by nanosponge. The utilization of nanosponges, their benefits, their production processes, the polymers they are made of, and their characterization have all been covered in this review article.

Nanosponges by the oxo-Michael polyaddition of cyclodextrins as sorbents of water pollutants: the o-toluidine case

Hydrophilic cyclodextrin nanosponges were prepared by the oxo-Michael polyaddition in an aqueous solution at pH > 10 of α-, β-, and γ-cyclodextrin with 1,4-bisacryloylpiperazine or 2,2-bisacrylamidoacetic acid. These nanosponges and, for comparison purposes, their precursor cyclodextrins were tested as sorbents of o-toluidine, a carcinogenic wastewater contaminant, by monitoring the depletion of o-toluidine from a 10^-4 M (10 ppm) aqueous solutions. To this aim, an innovative analytical procedure was used: The voltammetric peak currents of o-toluidine in linear sweep voltammetry experiments were registered using multi-walled carbon nanotubes-modified glassy carbon electrodes. The experimental sorption curves fitted a mono-exponential kinetic model, and the residual o-toluidine was 0.16 ppm, one order of magnitude lower than those of all other sorbents reported so far. The sorption capacities ranged from 88 to 199 µmol g^-1 (10-21.3 mg g^-1), equal to or higher than those of the parent cyclodextrins. All nanosponges were completely regenerated by extracting with methanol. After regeneration, the sorption capacity slightly improved, suggesting a rearrangement of the nanosponge network. Overall, it may be reasonably concluded that the cyclodextrin nanosponges reported in this paper warrant potential as o-toluidine exhaustive sorbents.

Evolving era of "sponges": Nanosponges as a versatile nanocarrier for the effective skin delivery of drugs

BACKGROUND

Nanosponge, as a carrier for skin delivery system for drugs, plays a vital role. It not only serves to administer the drug to the targeted layer of skin but also increases the drug retention and deposition on the skin.

OBJECTIVE

In this review, we aim to highlight the effects of several process and formulation variables prompting the characteristics of various nanosponges for the delivery of drugs into/ across the skin.

METHOD

In the present review article, over-all introduction of nanosponges, its preparation, characterstics features, advanatges, disadvantages, factors affecting their preparation are covered. Furthermore, an elaborative description of nanosponges for skin delivery and its toxicological perspective with some referential examples of nanosponge drugs have also been deliberated here.

RESULTS

Factors associated with the formation of nanosponges can directly or indirectly affect its efficacy in skin delivery of drugs. These nanoforms are efficient in delivering the drugs which possess lower aqueous solubility, therefore, the aqueous solubility of drugs possessing a narrow therapeutic window can easily be enhanced. It also helps in achieving targeted drug delivery, controlled release of drugs, increases bioavailability, reduces drug toxicity, decreases drug degradation, and many more.

CONCLUSION

Nanosponges have been identified as a potential drug delivery carriers into as well as across skin. Delivery of biologics such as vaccines, enzymes, peptides, proteins, and antibodies, is also gaining attention in the recent past.

Nutraceutical Concepts and Dextrin-Based Delivery Systems

Nutraceuticals are bioactive or chemical compounds acclaimed for their valuable biological activities and health-promoting effects. The global community is faced with many health concerns such as cancers, cardiovascular and neurodegenerative diseases, diabetes, arthritis, osteoporosis, etc. The effect of nutraceuticals is similar to pharmaceuticals, even though the term nutraceutical has no regulatory definition. The usage of nutraceuticals, to prevent and treat the aforementioned diseases, is limited by several features such as poor water solubility, low bioavailability, low stability, low permeability, low efficacy, etc. These downsides can be overcome by the application of the field of nanotechnology manipulating the properties and structures of materials at the nanometer scale. In this review, the linear and cyclic dextrin, formed during the enzymatic degradation of starch, are highlighted as highly promising nanomaterials- based drug delivery systems. The modified cyclic dextrin, cyclodextrin (CD)-based nanosponges (NSs), are well-known delivery systems of several nutraceuticals such as quercetin, curcumin, resveratrol, thyme essential oil, melatonin, and appear as a more advanced drug delivery system than modified linear dextrin. CD-based NSs prolong and control the nutraceuticals release, and display higher biocompatibility, stability, and solubility of poorly water-soluble nutraceuticals than the CD-inclusion complexes, or uncomplexed nutraceuticals. In addition, the well-explored CD-based NSs pathways, as drug delivery systems, are described. Although important progress is made in drug delivery, all the findings will serve as a source for the use of CD-based nanosystems for nutraceutical delivery. To sum up, our review introduces the extensive literature about the nutraceutical concepts, synthesis, characterization, and applications of the CD-based nano delivery systems that will further contribute to the nutraceutical delivery with more potent nanosystems based on linear dextrins.

History of Cyclodextrin Nanosponges

Nowadays, research in the field of nanotechnology and nanomedicine has become increasingly predominant, focusing on the manipulation and development of materials on a nanometer scale. Polysaccharides have often been used as they are safe, non-toxic, hydrophilic, biodegradable and are low cost. Among them, starch derivatives and, in particular, cyclodextrin-based nanosponges (CD NSs) have recently emerged due to the outstanding properties attributable to their peculiar structure. In fact, alongside the common polysaccharide features, such as the presence of tunable functional groups and their ability to interact with biological tissues, thus giving rise to bioadhesion, which is particularly useful in drug delivery, what makes CD NSs unique is their three-dimensional network made up of crosslinked cyclodextrin units. The name “nanosponge” appeared for the first time in the 1990s due to their nanoporous, sponge-like structure and responded to the need to overcome the limitations of native cyclodextrins (CDs), particularly their water solubility and inability to encapsulate charged and large molecules efficiently. Since CD NSs were introduced, efforts have been made over the years to understand their mechanism of action and their capability to host molecules with low or high molecular weight, charged, hydrophobic or hydrophilic by changing the type of cyclodextrin, crosslinker and degree of crosslinking used. They enabled great advances to be made in various fields such as agroscience, pharmaceutical, biomedical and biotechnological sectors, and NS research is far from reaching its conclusion. This review gives an overview of CD NS research, focusing on the origin and key points of the historical development in the last 50 years, progressing from relatively simple crosslinked networks in the 1960s to today’s multifunctional polymers. The approach adopted in writing the present study consisted in exploring the historical evolution of NSs in order to understand their role today, and imagine their future.

New Poly(β-Cyclodextrin)/Poly(Vinyl Alcohol) Electrospun Sub-Micrometric Fibers and their Potential Application for Wastewater Treatments

Cyclodextrin (CD)-based polymers are known to efficiently form molecular inclusion complexes with various organic and inorganic guest compounds. In addition, they also have a great potential as metal complexes because deprotonated hydroxyls can strongly bind metal ions under alkaline conditions. The range of environmental conditions for polycyclodextrin/metal ion complexation can be extended by the polymerization of CDs with polyacids. This article describes the preparation and characterization of a new type of poly(β-cyclodextrin) (Poly-βCD) sub-micrometric fibers and explores their potential as metal ion sorbents. A water-soluble hyper-branched β-cyclodextrin polymer was blended with poly(vinyl alcohol) (PVA) and here used to improve the mechanical and morphological features of the fibers. Solutions with a different Poly-βCD/PVA ratio were electrospun, and the fibers were cross-linked by a post-spinning thermal treatment at 160 °C to ensure non-solubility in water. The fiber morphology was analyzed by scanning electron microscopy (SEM) before and after the curing process, and physical-chemical properties were studied by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The capability of the insoluble cyclodextrin-based fibers to remove heavy metals from wastewaters was investigated by testing the adsorption of Cu²⁺ and Cd²⁺ using inductively coupled plasma-optical emission spectroscopy (ICP-OES). The results suggest that the poly(β-cyclodextrin)/poly(vinyl alcohol) sub-micrometric fibers can complex metal ions and are especially effective Cu²⁺ sorbents, thus opening new perspectives to the development of fibers and membranes capable of removing both metal ions and organic pollutants.

Eco-Friendly β-cyclodextrin and Linecaps Polymers for the Removal of Heavy Metals

Environment-friendly nanosponges, having a high content of carboxyl groups, were synthesized by crosslinking β-cyclodextrin and linecaps, a highly soluble pea starch derivative, with citric acid in water. Additionally, pyromellitic nanosponges were prepared by reacting β-cyclodextrin and linecaps with pyromellitic dianhydride in dimethyl sulfoxide and used in comparison with the citric nanosponges. After ion-exchange of the carboxyl groups H⁺ with sodium ions, the ability of the nanosponges to sequester heavy metal cations was investigated. At a metal concentration of 500 ppm, the pyromellitate nanosponges exhibited a higher retention capacity than the citrate nanosponges. At lower metal concentrations (≤50 ppm) both the citrate and the pyromellitate nanosponges showed high retention capacities (up to 94% of the total amount of metal), while, in the presence of interfering sea water salts, the citrate nanosponges were able to selectively adsorb a significantly higher amount of heavy metals than the pyromellitate nanosponges, almost double in the case of Cu²⁺.

Evaluation of solubility enhancement, antioxidant activity, and cytotoxicity studies of kynurenic acid loaded cyclodextrin nanosponge

Kynurenic acid demonstrates antioxidant, neuroprotective and free radical scavenging properties. However, low aqueous solubility of kynurenic acid limits its therapeutic activity. In the present study, cyclodextrin nanosponges were used to improve the solubility and therapeutic activity of kynurenic acid. The formation of kynurenic acid loaded nanosponge was confirmed by different characterization techniques. The solubility of kynurenic acid was significantly increased with nanosponge (111.1 μg/ml) compared to free kynurenic acid (16.4 μg/ml) and β-cyclodextrin (28.6 μg/ml). High drug loading (19.06%) and encapsulation efficiency (95.31%) were achieved with NS. The particle size and zeta potential of kynurenic acid loaded nanosponge was around 255.8 nm and -23 mV respectively. Moreover, higher solubilization of kynurenic acid loaded nanosponge produced better antioxidant activity compared to free kynurenic acid. The kynurenic acid loaded nanosponge and blank nanosponge were found nontoxic in the cytotoxicity assay. Thus, these studies demonstrated that nanosponges can be used as a carrier for the delivery of kynurenic acid.

Self-Assembled Hydrogels Based on Poly-Cyclodextrin and Poly-Azobenzene Compounds and Applications for Highly Efficient Removal of Bisphenol A and Methylene Blue

The excellent physical and chemical properties of cyclodextrin polymer (poly-CD)/azobenzene-modified polyacrylic acid (PAA-Azo) binary composite hydrogels have been designed and prepared. The prepared hydrogels were subjected to a variety of characterizations, including scanning electron microscopy, ultraviolet spectroscopy, circular dichroism spectroscopy, infrared spectroscopy, rheological properties, and specific surface area tests. It was found that the obtained hydrogels have the cross-linked three-dimensional porous network nanostructures, and the formed composite poly-CD/PAA-Azo hydrogel can basically be shear thinned and have good recovery performance. A process of gel-sol transition can occur when the gel has a stimulatory response under UV light irradiation. In addition, such excellent properties of hydrogels exhibit different mechanisms in the adsorption of organic molecules that are harmful to the environment, such as bisphenol A (BPA) and methylene blue (MB). The polymeric hydrogel serves as novel adsorbent agents to adsorb BPA via host-guest interaction and anchor MB via electrostatic interaction and hydrogen bonding.

Carboxylate cross-linked cyclodextrin: A nanoporous scaffold for enhancement of rosuvastatin oral bioavailability

Cyclodextrins play an important role in supramolecular chemistry acting as building blocks than can be cross-linked by various linker molecules forming nano-porous structures called nanosponges (NS). NS have the ability to enhance the stability, solubility and bioavailability of various actives. This work aimed at elaborating rosuvastatin (ROS) loaded NS to improve its oral bioavailability. Carboxylate-linked NS were synthesized by reacting β-CD with pyromellitic dianhydride (PDA) at different molar ratios under specific conditions. ROS-loaded NS were prepared by lyophilisation technique and characterized for particle size, zeta potential, entrapment efficiency and drug release. Occurrence of cross-linking and ROS incorporation within the NS were assessed by DSC, FT-IR and SEM micrographs. NS prepared at a molar ratio of 1:6 of β-CD: PDA demonstrated the highest entrapment efficiency (88.76%), an optimum particle size of 275nm, a narrow size distribution (PDI of 0.392), and zeta potential of -61.9 indicating good colloidal stability. In vivo oral pharmacokinetics study in male Sprague Dawley rats showed that ROS-NS provided an outstanding enhancement in oral bioavailability compared to drug suspension and marketed tablets besides their physicochemical stability for 3month. Accordingly, ROS-NS represent a superior alternative to the conventional marketed formulation for effective ROS delivery.

Pre- and post-modification of mixed cyclodextrin-calixarene co-polymers: A route towards tunability

Various pre-modified and post-modified cyclodextrin-calixarene hyper-reticulated co-polymers were synthesized, fully characterized by different techniques (FT-IR, ¹³C{¹H} CP-MAS and LGFS solid-state NMR, thermogravimetry, porosimetry), and tested to assess their absorption abilities as nanosponges. The construction of the polymer network was accomplished exploiting the well-known CuAAC reaction between two different heptakis-6-azido-β-cyclodextrins and two different propargyloxy-calix[4]arenes. Post-modification was aimed to achieve the presence of ionizable (acidic or basic) groups on the polymer framework. Sequestration tests towards two model pollutant molecules surprisingly showed that both pristine and post-modified materials actually possess the abilities to act as pH-tunable nanosponges.

Water-soluble cationic poly(β-cyclodextrin-co-guanidine) as a controlled vitamin B2delivery carrier

Vitamin B₂(VB₂) is effectively incorporated into novel water-soluble cationic β-cyclodextrin (β-CD) polymers in order to improve its physiochemical properties.

Polyaminocyclodextrin nanosponges: synthesis, characterization and pH-responsive sequestration abilities

New pH-responsive nanosponges were obtained by reacting four different polyaminocyclodextrins with heptakis-(6-bromo)-(6-deoxy)-β-cyclodextrin.

Cyclodextrin–calixarene co-polymers as a new class of nanosponges

Novel nanosponge materials, obtained by co-polymerization of cyclodextrin and calixarene derivatives, have been characterized by various techniques and tested for the removal of model pollutants from aqueous solution.

Efficient removal of cobalt from aqueous solution using β-cyclodextrin modified graphene oxide

β-Cyclodextrin modified graphene oxide (denoted as β-CD–GO) was synthesized and applied as a sorbent to remove Co(ii) from aqueous solution.

Cyclodextrin-based nanosponges as drug carriers

Cyclodextrin-based nanosponges, which are proposed as a new nanosized delivery system, are innovative cross-linked cyclodextrin polymers nanostructured within a three-dimensional network. This type of cyclodextrin polymer can form porous insoluble nanoparticles with a crystalline or amorphous structure and spherical shape or swelling properties. The polarity and dimension of the polymer mesh can be easily tuned by varying the type of cross-linker and degree of cross-linking. Nanosponge functionalisation for site-specific targeting can be achieved by conjugating various ligands on their surface. They are a safe and biodegradable material with negligible toxicity on cell cultures and are well-tolerated after injection in mice. Cyclodextrin-based nanosponges can form complexes with different types of lipophilic or hydrophilic molecules. The release of the entrapped molecules can be varied by modifying the structure to achieve prolonged release kinetics or a faster release. The nanosponges could be used to improve the aqueous solubility of poorly water-soluble molecules, protect degradable substances, obtain sustained delivery systems or design innovative drug carriers for nanomedicine.

Cyclodextrin nanosponge-sensitized enantiodifferentiating photoisomerization of cyclooctene and 1,3-cyclooctadiene

Enantiodifferentiating geometrical photoisomerizations of (Z)-cyclooctene and (Z,Z)-1,3-cyclooctadiene were performed by using the pyromellitate-linked cyclodextrin network polymer, termed "cyclodextrin nanosponge (CDNS)", as a supramolecular sensitizing host. The photochirogenic behavior of the nanosponges incorporating β- or γ-cyclodextrin was significantly different from that reported for the conventional sensitizer-appended monomeric cyclodextrins, affording chiral (E)-cyclooctene and (E,Z)-cyclooctadiene in enantiomeric excesses critically dependent on the solution pH and solvent composition employed, revealing the active roles of chiral void spaces of CDNS in the photochirogenic reaction.

Comparative study of polymer containing beta-cyclodextrin and -COOH for adsorption toward aniline, 1-naphthylamine and methylene blue

Three different polymers P1, P2 and P3 (P1 containing both beta-CD and -COOH, P2 containing beta-CD and P3 containing -COOH) were synthesized and applied to adsorption toward aniline, 1-naphthylamine and methylene blue. The concentrations (C) before and after adsorption were determined and the adsorption capacities (q) of P1, P2 and P3 were calculated. The maximum adsorption capacities (q(max)) toward aniline: q(max) (P1)=104 micromol g(-1), q(max) (P2)=14.9 micromol g(-1) and q(max) (P3)=53.1 micromol g(-1); toward 1-naphthylamine: q(max) (P1)=184 micromol g(-1), q(max) (P2)=53.8 micromol g(-1) and q(max) (P3)=125 micromol g(-1); toward methylene blue: q(max) (P1)=200 micromol g(-1), q(max) (P2)=12.7 micromol g(-1) and q(max) (P3)=215 micromol g(-1). P1 exhibited remarkable adsorption toward all the three adsorbates. P2 was almost equal to P1 in adsorption toward methylene blue, but was less efficient than P1 in adsorption toward aniline and 1-naphthylamine. P3 also exhibited considerable adsorption toward aniline and 1-naphthylamine, but was inefficient toward methylene blue. P1 was obtained from nontoxic materials and through environment friendly procedures, so it was potentially an efficient and green adsorbent for water purification.