Constructing bio-layer of heparin and type IV collagen on titanium surface for improving its endothelialization and blood compatibility

Protein-based layer-by-layer films for biomedical applications

The surface engineering of biomaterials is crucial for their successful (bio)integration by the body, i.e. the colonization by the tissue-specific cell, and the prevention of fibrosis and/or bacterial colonization. Performed at room temperature in an aqueous medium, the layer-by-layer (LbL) coating method is based on the alternating deposition of macromolecules. Versatile and simple, this method allows the functionalization of surfaces with proteins, which play a crucial role in several biological mechanisms. Possessing intrinsic properties (cell adhesion, antibacterial, degradable, etc.), protein-based LbL films represent a powerful tool to control bacterial and mammalian cell fate. In this article, after a general introduction to the LbL technique, we will focus on protein-based LbL films addressing different biomedical issues/domains, such as bacterial infection, blood contacting surfaces, mammalian cell adhesion, drug and gene delivery, and bone and neural tissue engineering. We do not consider biosensing applications or electrochemical aspects using specific proteins such as enzymes.

Surface modification strategies to improve titanium hemocompatibility: a comprehensive review

Titanium and its alloys are widely used in different biomaterial applications due to their remarkable mechanical properties and bio-inertness. However, titanium-based materials still face some challenges, with an emphasis on hemocompatibility. Blood-contacting devices such as stents, heart valves, and circulatory devices are prone to thrombus formation, restenosis, and inflammation due to inappropriate blood-implant surface interactions. After implantation, when blood encounters these implant surfaces, a series of reactions takes place, such as protein adsorption, platelet adhesion and activation, and white blood cell complex formation as a defense mechanism. Currently, patients are prescribed anticoagulant drugs to prevent blood clotting, but these drugs can weaken their immune system and cause profound bleeding during injury. Extensive research has been done to modify the surface properties of titanium to enhance its hemocompatibility. Results have shown that the modification of surface morphology, roughness, and chemistry has been effective in reducing thrombus formation. The main focus of this review is to analyze and understand the different modification techniques on titanium-based surfaces to enhance hemocompatibility and, consequently, recognize the unresolved challenges and propose scopes for future research.

Endothelial Cell-Mediated Gene Delivery for In Situ Accelerated Endothelialization of a Vascular Graft

As an urgently needed device for vascular diseases, the small-diameter vascular graft is limited by high thrombogenicity in clinical applications. Rapid endothelialization is a promising approach to construct an antithrombogenic inner surface of the vascular graft. The main bottleneck for rapid endothelialization is the adhesion, migration, and proliferation of endothelial cells (ECs) in situ of the small-diameter vascular graft. Herein, we innovatively fabricated an intelligent gene delivery small-caliber vascular graft based on electrospun poly(lactic acid-co-caprolactone) and gelatin for rapid in situ endothelialization. The graft surface was co-modified with EC adhesive peptide of Arg-Glu-Asp-Val (REDV) and responsive gene delivery system. REDV can selectively adhere ECs onto the graft surface; subsequently, the overexpressed matrix metalloproteinase by ECs can effectively cleave the linker peptide GPQGIWGQ-C; and finally, the gene complexes were intelligently and enzymatically released from the graft surface, and thereby, the gene can efficiently transfect ECs. Importantly, this enzymatically releasing gene surface has been proven to be safe and temporarily stable in blood flow owing to the biotin-avidin interaction to immobilize gene complexes on the inner surface of vascular grafts through the GPQGIWGQ-C peptide linker. It has the advantage of specifically adhering the ECs to the surface and smartly transfecting them with high transfection efficiency. The co-modified surface has been demonstrated to accelerate the luminal endothelialization in vivo, which might be attributed to the synergistic effect of REDV and effective gene transfection. Particularly, the intelligent and responsive gene release surface will open a new avenue to enhance the endothelialization of blood-contacting devices.

Tanfloc/heparin polyelectrolyte multilayers improve osteogenic differentiation of adipose-derived stem cells on titania nanotube surfaces

In this study, a surface modification strategy using natural biopolymers on titanium is proposed to improve bone healing and promote rapid and successful osseointegration of orthopedic implants. Titania nanotubes were fabricated via an anodization process and the surfaces were further modified with polyelectrolyte multilayers (PEMs) based on Tanfloc (a cationic tannin derivative) and glycosaminoglycans (heparin and hyaluronic acid). Scanning electron microscopy (SEM), water contact angle measurements, and X-ray photoelectron spectroscopy were used to characterize the surfaces. Adipose-derived stem cells (ADSCs) were seeded on the surfaces, and the cell viability, adhesion, and proliferation were investigated. Osteogenesis was induced and osteogenic differentiation of human ADSCs on the surfaces was evaluated via mineralization and protein expression assays, immunofluorescent staining, and SEM. The Tanfloc/heparin PEMs on titania nanotubes improved the rate of osteogenic differentiation of ADSCs as well as the bone mineral deposition, and is therefore a promising approach for use in orthopedic implants.

Surface Engineering of Cardiovascular Devices for Improved Hemocompatibility and Rapid Endothelialization

Cardiovascular devices have been widely applied in the clinical treatment of cardiovascular diseases. However, poor hemocompatibility and slow endothelialization on their surface still exist. Numerous surface engineering strategies have mainly sought to modify the device surface through physical, chemical, and biological approaches to improve surface hemocompatibility and endothelialization. The alteration of physical characteristics and pattern topographies brings some hopeful outcomes and plays a notable role in this respect. The chemical and biological approaches can provide potential signs of success in the endothelialization of vascular device surfaces. They usually involve therapeutic drugs, specific peptides, adhesive proteins, antibodies, growth factors and nitric oxide (NO) donors. The gene engineering can enhance the proliferation, growth, and migration of vascular cells, thus boosting the endothelialization. In this review, the surface engineering strategies are highlighted and summarized to improve hemocompatibility and rapid endothelialization on the cardiovascular devices. The potential outlook is also briefly discussed to help guide endothelialization strategies and inspire further innovations. It is hoped that this review can assist with the surface engineering of cardiovascular devices and promote future advancements in this emerging research field.

Enhanced hemocompatibility and antibacterial activity on titania nanotubes with tanfloc/heparin polyelectrolyte multilayers

Biomaterial-associated thrombus formation and bacterial infection remain major challenges for blood-contacting devices. For decades, titanium-based implants have been largely used for different medical applications. However, titanium can neither suppress blood coagulation, nor prevent bacterial infections. To address these challenges, tanfloc/heparin polyelectrolyte multilayers on titania nanotubes array surfaces (NT) were developed. The surfaces were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and water contact angle measurements. To evaluate the hemocompatibility of the surfaces, fibrinogen adsorption, Factor XII activation, and platelet adhesion and activation were analyzed. The antibacterial activity was investigated against Gram-negative P. aeruginosa and Gram-positive S. aureus. Bacterial adhesion and morphology, as well as biofilm formation, were analyzed using fluorescence microscopy and SEM. The anti-thrombogenic properties of the surfaces were demonstrated by significant decreases in fibrinogen adsorption, Factor XII activation, and platelet adhesion and activation. Modifying NT with tanfloc/heparin also reduces the adhesion and proliferation of P. aeruginosa and S. aureus bacteria after 24 hr of incubation, with no biofilm formation. The modified NT surfaces with tanfloc/heparin polyelectrolyte multilayers are a promising biomaterial for use on implant surfaces because of their enhanced blood biocompatibility and antibacterial properties.

Co-immobilization of CD133 antibodies, vascular endothelial growth factors, and REDV peptide promotes capture, proliferation, and differentiation of endothelial progenitor cells

Capture of endothelial progenitor cells (EPCs) in situ has been considered as a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and implant devices. In this study, a CD133⁺ EPC capture surface was fabricated by grafting CD133 antibody (a more specific EPC surface marker than CD34) and Arg-Glu-Asp-Val (REDV) peptideon the methacrylate-grafted hyaluronic acid (MA-HA) and heparin-hybridized (MA-HA&Heparin) resisting layer. Vascular endothelial growth factor (VEGF) was further conjugated to the immobilized heparin. This engineered surface showed good hemocompatibility and significantly higher ability of capturing CD133⁺ EPCs from human peripheral blood mononuclear cells (PBMCs) and obviously upregulated the expression of endothelial cell (EC) marker genes of EPCs such as VEGF receptor 2 (VEGFR2), CD31, VE-cadherin, and von Willebrand factor (vWF), facilitating the differentiation of EPCs into ECs. The dramatically enhanced EPC proliferation on this surface was dependent on the integrin-VEGFR synergistic signaling, as ERK1/2 phosphorylation was only significantly enhanced on the REDV and VEGF co-immobilized surface. This study highlights a new surface coating strategy for blood-contact materials based on the specific EPC capturing and rapid endothelialization. STATEMENT OF SIGNIFICANCE: Capture of endothelial progenitor cells (EPCs) in situ is a promising strategy for the rapid endothelialization and long-term patency of artificial blood vessels and scaffolds. More specific capture of EPCs by targeting CD133 rather than CD34 can better reduce the risk of inflammation and restenosis. On the other hand, an appropriate microenvironment for EPC proliferation is equally important for endothelialization, which is rarely considered by the existing EPC capture strategies. In this study, the capture ratio of EPCs was significantly increased by simultaneously grafting CD133 antibody and VEGF on a MA-HA and heparin-hybridized antifouling layer. Further, proliferation of EPCs after capture was significantly promoted by grafting VEGF and REDV peptide through the integrin-VEGFR synergistic signaling. This study highlights a new strategy for the surface coating of blood-contact materials based on specific EPC capture and rapid endothelialization.

[Implantation strategy of tissue-engineered liver based on decellularized spleen matrix in rats]

OBJECTIVE

To explore the optimal implantation strategy of tissue-engineered liver (TEL) constructed based on decellularized spleen matrix (DSM) in rats.

METHODS

DSM was prepared by freeze-thawing and perfusion with sodium dodecyl sulfate (SDS) of the spleen of healthy SD rats. Primary rat hepatocytes isolated using modified Seglen 2-step perfusion method were implanted into the DSM to construct the TEL. The advantages and disadvantages were evaluated of 4 transplant strategies of the TEL, namely ectopic vascular anastomosis, liver cross-section suture transplantation, intrahepatic insertion and mesenteric transplantation.

RESULTS

The planting rate of hepatocytes in the DSM was (74.5∓7.7)%. HE staining and scanning electron microscopy showed satisfactory cell status, and immunofluorescence staining confirmed the normal expression of ALB and G6Pc in the cells. For TEL implantation, ectopic vascular anastomosis was difficult and resulted in a mortality rate of 33.3% perioperatively and massive thrombus formation in the matrix within 6 h. Hepatic cross-section suture failed to rapidly establish sufficient blood supply, and no viable graft was observed 3 days after the operation. With intrahepatic insertion method, the hepatocytes in the DSM could survive as long as 14 days. Mesenteric transplantation resulted in a hepatocyte survival rate of (38.3+7.1)% at 14 days after implantation.

CONCLUSION

TEL constructed based on DSM can perform liver-specific functions with a good cytological bioactivity. Mesenteric transplantation of the TEL, which is simple, safe and effective, is currently the optimal transplantation strategy.

Stent technology in ischemic stroke

Atherosclerotic disease of the cerebral vasculature is a major cause of stroke worldwide. Atherosclerosis that is refractory to best medical management may require revascularization. In these instances, endovascular treatment provides a popular and safe alternative to open surgical techniques. The authors provide an overview of stent technology in the treatment of ischemic stroke, discussing the major studies evaluating stenting for extracranial carotid artery, vertebral artery, and intracranial atherosclerotic disease. The authors describe the commonly used stents with respect to their individual characteristics and technical limitations. Current and future developments in stent technology are also discussed, with areas for further innovation and clinical research.

Human Endothelial Cell Models in Biomaterial Research

Endothelial cell (EC) models have evolved as important tools in biomaterial research due to ubiquitously occurring interactions between implanted materials and the endothelium. However, screening the available literature has revealed a gap between material scientists and physiologists in terms of their understanding of these biomaterial-endothelium interactions and their relative importance. Consequently, EC models are often applied in nonphysiological experimental setups, or too extensive conclusions are drawn from their results. The question arises whether this might be one reason why, among the many potential biomaterials, only a few have found their way into the clinic. In this review, we provide an overview of established EC models and possible selection criteria to enable researchers to determine the most reliable and relevant EC model to use.