Tannic Acid Stabilised Copper Nanocluster Developed Through Microwave Mediated Synthesis as a Fluorescent Probe for the Turn on Detection of Dopamine

A sequential dual-locked luminescent copper nanocluster probe for tumor cell imaging and killing

A sequential dual-locked luminescent copper nanoclusters (CuNCs) probe was designed and synthesized for the specific imaging and selective killing of tumor cells. This nanoprobe was prepared by first forming a Fe3+-coupled tannic acid (TA)-stabilized CuNCs (CuNCs-FeIII), which is in quenching state due to the electron transfer between CuNCs and Fe3+, and then coating a protectable layer of hyaluronic acid (HA) on the surface of CuNCs-FeIII to form the final dual-locked nanoprobe (CuNCs-FeIII@HA). When the nanoprobe of CuNCs-FeIII@HA target enter the tumor cells through CD44-HA receptor, HAase will first digest the HA layer of the nanoprobes, and then, GSH over-expressed in tumor cells will reduce Fe3+ to Fe2+, thus restoring the fluorescence emission of CuNCs and at the same time killing the tumor cells with the hydroxyl free radicals (∙OH) produced by the Fenton reaction between Fe2+ and H2O2. This sequential dual-locked luminescent nanoprobe of CuNCs-FeIII@HA has been successfully used for the specific imaging and selective killing of tumor cells.

Rapid chemical reduction synthesis of copper nanoclusters with blue fluorescence for highly sensitive detection of furazolidone

Tannic acid (TA), as a stabilizing agent, was successfully utilized to establish blue-emitting copper nanoclusters (TA-Cu NCs) on the basis of a facile chemical reduction preparation method. Characterization results proved successful synthesis of TA-Cu NCs with uniform size and excellent stability. TA-Cu NCs exhibited a blue emission wavelength at 431 nm when excited at 364 nm. Interestingly, the as-prepared TA-Cu NCs were selectively quenched by furazolidone based on static quenching. In addition, this analysis platform for furazolidone detection had an excellent linear range from 0.5 to 120 μM with a detection limit of 0.074 μM (S/N = 3). Furthermore, the accuracy of this sensing method was successfully confirmed by detecting furazolidone in bovine serum samples, indicating that TA-Cu NCs had bright application prospects.

Anchoring copper nanoclusters to Al2O3 microsphere for dual-mode analysis of N-acetyl-β-D-glucosaminidase and information encryption

Herein, we attempted to confine copper nanoclusters (CuNCs) with alumina (Al2O3) as the matrix (Al2O3@CuNCs), which effectively circumvented the drawbacks of CuNCs (such as weak photoluminescence and low quantum yield). Al2O3@CuNCs demonstrated sensitive response to p-nitrophenol, the catalytic product of N-acetyl-β-D-glucosaminidase (NAG) on account of the inner filter effect and dynamic quenching effect. In light of this, a novel assay was created to identify NAG, a critical indicator of diabetic nephropathy. Additionally, a portable and instrument-free sensing platform mainly consisting of a smartphone, a cuvette, a cuvette holder, a dark box and a 365 nm UV lamp was developed for the quantitative detection of NAG. The as-prepared material was also utilized in anti-counterfeiting and information encryption based on their excellent optical properties and sensitive response to the catalyzed product of NAG. This work advanced potential applications of CuNCs composites in the areas of portable, multi-mode biosensing, anti-counterfeiting and information encryption.

Recent Advances in Catecholamines Analytical Detection Methods and Their Pretreatment Technologies

Catecholamines (CAs), including adrenaline, noradrenaline, and dopamine, are neurotransmitters and hormones that play a critical role in regulating the cardiovascular system, metabolism, and stress response in the human body. As promising methods for real-time monitoring of catecholamine neurotransmitters, LC-MS detectors have gained widespread acceptance and shown significant progress over the past few years. Other detection methods such as fluorescence detection, colorimetric assays, surface-enhanced Raman spectroscopy, and surface plasmon resonance spectroscopy have also been developed to varying degrees. In addition, efficient pretreatment technology for CAs is flourishing due to the increasing development of many highly selective and recoverable materials. There are a few articles that provide an overview of electrochemical detection and efficient enrichment, but a comprehensive summary focusing on analytical detection technology is lacking. Thus, this review provides a comprehensive summary of recent analytical detection technology research on CAs published between 2017 and 2022. The advantages and limitations of relevant methods including efficient pretreatment technologies for biological matrices and analytical methods used in combination with pretreatment technology have been discussed. Overall, this review article provides a better understanding of the importance of accurate CAs measurement and offers perspectives on the development of novel methods for disease diagnosis and research in this field.

Super-assembled mesoporous thin films with asymmetric nanofluidic channels for sensitive and reversible electrical sensing

Bioinspired artificial nanochannels have emerged as promising candidates for developing smart nanofluidic sensors due to their highly controllable size and surface functionality. However, little attention has been paid to the role of the outer surface of the nanochannels in enhancing the detection sensitivity. Herein, an asymmetric nanochannel-based responsive detection platform with ultrathin tannic acid modified mesoporous silica (TA-MS) layer and alumina oxide (AAO) thin film is prepared through super-assembly strategy. The functional TA-MS outer surface layer provides abundant phenolic groups on the nanochannels for ions and molecules transport, which paves the way for the development of heterochannels for label-free, reversible and highly sensitive dopamine (DA) detection based off of cation displacement effect. Notably, by engineering optimal thickness of the TA-MS, the sensing performance can be further improved. After optimization, the linear response ranges for DA detection are 0.001-1 μM, 1-10 μM and 10-200 μM with the detection limit of 0.1 nM. The prepared sensor exhibits stable reversibility after several detection cycles. In addition, this method was successfully applied for DA detection in fetal bovine serum sample. Theoretical calculations further prove the detection mechanism. This work opens a new horizon of using mesoporous materials to construct nanofluidic sensors for ultrasensitive small molecule detection and recognition.

Fluorescent folic acid-capped copper nanoclusters for the determination of rifampicin based on inner filter effect

Development of excellent sensors to determine trace concentrations of rifampicin is of intense importance for medicine analysis and human health. Herein, a facile and green fluorescent probe was established for the determination of rifampicin by using folic acid protected copper nanoclusters (FA-Cu NCs). Many characterization methods were applied for the analysis of the as-prepared FA-Cu NCs including UV-visible absorption spectra, fluorescence spectra, Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM), fluorescence lifetime and X-ray photoelectron spectroscopy (XPS). The TEM image suggested that the as-prepared FA-Cu NCs were highly dispersed. The as-synthesized FA-Cu NCs emerged blue fluorescence under UV light and demonstrated maximum emission wavelength at 446 nm under the maximum excitation wavelength of 358 nm. After the addition of rifampicin, the FL intensities of FA-Cu NCs were uncommonly quenched. The related experimental data intimated that the quenching mechanisms were assumed to the inner filter effect (IFE) and static quenching. The as-proposed probe platform displayed an obvious linear relationship with rifampicin concentrations varying from 0.5 to 100 µM, and the corresponding detection limit (LOD) was 0.073 µM (S/N = 3). Finally, the as-established detection platform was successfully employed to analyze trace concentrations of rifampicin in real samples.

Copper nanoclusters: designed synthesis, structural diversity, and multiplatform applications

Atomically precise metal nanoclusters (MNCs) have gained tremendous research interest in recent years due to their extraordinary properties. The molecular-like properties that originate from the quantized electronic states provide novel opportunities for the construction of unique nanomaterials possessing rich molecular-like absorption, luminescence, and magnetic properties. The field of monolayer-protected metal nanoclusters, especially copper, with well-defined molecular structures and compositions, is relatively new, about two to three decades old. Nevertheless, the massive progress in the field illustrates the importance of such nanoobjects as promising materials for various applications. In this respect, nanocluster-based catalysts have become very popular, showing high efficiencies and activities for the catalytic conversion of chemical compounds. Biomedical applications of clusters are an active research field aimed at finding better fluorescent contrast agents, therapeutic pharmaceuticals for the treatment and prevention of diseases, the early diagnosis of cancers and other potent diseases, especially at early stages. A huge library of structures and the compositions of copper nanoclusters (CuNCs) with atomic precisions have already been discovered during last few decades; however, there are many concerns to be addressed and questions to be answered. Hopefully, in future, with the combined efforts of material scientists, inorganic chemists, and computational scientists, a thorough understanding of the unique molecular-like properties of metal nanoclusters will be achieved. This, on the other hand, will allow the interdisciplinary researchers to design novel catalysts, biosensors, or therapeutic agents using highly structured, atomically precise, and stable CuNCs. Thus, we hope this review will guide the reader through the field of CuNCs, while discussing the main achievements and improvements, along with challenges and drawbacks that one needs to face and overcome.

Blue-emitting glutathione-capped copper nanoclusters as fluorescent probes for the highly specific biosensing of furazolidone

Herein, a facile, straightforward and green method was developed to prepare copper nanoclusters by using glutathione (GSH) as the protecting agent and ascorbic acid as the reducing agent. The glutathione-templated copper nanoclusters (GSH-Cu NCs) were characterized through fluorescence spectroscopy, UV-vis absorption spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and fluorescence lifetime analysis. The as-synthesized Cu NCs showed blue fluorescence with a peak centered at 426 nm. The Cu NCs had excellent water solubility, stability and dispersibility. Based on the inner filter effect and static quenching mechanism, Cu NCs were employed to detect furazolidone in bovine serum samples. Under optimal detection conditions, a good linear relationship was observed between F₀/F and the furazolidone concentration from 0.05 to 60 μM. The detection limit (LOD) was 0.012 μM. Furthermore, the fluorescence probe was successfully used in the quantification of furazolidone in bovine serum samples. In addition, this analytical method provides a rapid, easy and ultrasensitive fluorescence platform for the detection of furazolidone.

Novel synthesis of orange-red emitting copper nanoclusters stabilized by methionine as a fluorescent probe for norfloxacin sensing

In the present work, we report a novel chemical approach for the synthesis of orange-red emitting copper nanoclusters (Cu NCs) using L-methionine as stabilizing agent at room temperature for the first time. The synthetic route is facile, economical and viable. The methionine stabilized copper nanoclusters (Cu NCs/Met) were thoroughly characterized by TEM, FT-IR, XPS, UV-Vis, steady state and transient fluorescence spectroscopy. The results show the synthesized Cu NCs/Met with a fluorescence quantum yield of 4.37% possessed high stability and excellent optical features such as large Stokes shift and long fluorescence lifetime (8.3 μs). Significantly, the fluorescence intensity of Cu NCs/Met could be efficiently quenched by norfloxacin (NOR) pharmaceutical. A fast and cost-effective NOR sensor was proposed employing Cu NCs/Met as the fluorescent nanoprobe, and the quenching mechanisms were attributed to inner filter effect and agglomeration-induced quenching. The developed sensor exhibited a high sensitivity and selectivity towards NOR in a wide linear range from 0.05 to 250 μM with a detection limit as low as 17 nM. Moreover, the practicability of the developed NOR sensor for real sample assay was validated with satisfactory recoveries, indicating this sensing platform with great potential for label-free pharmaceutical detection in complex systems.