Characterization of α-Fe2O3 Nanoparticles Prepared from a New [Fe(Ofloxacin)2Cl2] Precursor: A Heterogeneous Photocatalyst for Removal of Methylene Blue and Ciprofloxacin in Water

The photocatalytic, cytotoxicity, and antibacterial properties of zinc oxide nanoparticles synthesized using Trigonella foenum-graecum L extract

In this study, the manufacture of zinc oxide nanoparticles (ZnO-NPs) was completed via the sol-gel method with Trigonella foenum-graecum L extract for the first time to function as the stabilizing and reducing agent. The obtained product was investigated by various analyzing procedures such as TGA/DTG, FT-IR, UV-Vis, XRD, and EDX/FESEM. The calcination of our product was conducted at temperatures of 400, 500, and 600 °C. In conformity to the XRD pattern, heightening the temperature of calcination caused an enlargement in the size of nanoparticles. The photocatalytic performance of ZnO-NPs was evaluated to degrade methylene blue and Eriochrome black T (EBT) dyes under UV light, which resulted in a degradation percentage of about 96% and 94%, after 90 min, respectively. There has been some evidence suggesting that the green synthesis of ZnO-NPs has increased their use in medicine. The outcomes of examining the cytotoxicity effect of this product against the Huh-7 cell line by the performance of the MTT assay were indicative of an IC₅₀ of around 62.5 µg/mL. Finally, according to the results of the broth microdilution method, which was performed to assess the antibacterial activity of ZnO-NPs towards gram-positive and gram-negative bacteria, the value of MIC was in the range of 31 to 125 µg/mL. The obtained results from biological studies confirm the antibacterial and anticancer properties of ZnO-NPs, which are promising for applying NPs in medical fields.

Balanites aegyptiaca leaf extract-mediated synthesis of silver nanoparticles and their catalytic dye degradation and antifungal efficacy

This study describes the biosynthesis of silver nanoparticles (AgNPs) using Balanites aegyptiaca (B. aegyptiaca) leaf extract. The biosynthesized AgNPs were characterized by UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy with (SEM-EDS). The AgNPs showed an average size of 10–20 nm, spherical shape, and crystalline nature. The application of these synthesized AgNPs to dye degradation showed that the AgNPs removed the two organic pollutants methylene blue (MB, 93.47%) and congo red (CR, (78.57%). In vitro investigation of the antifungal activity of the AgNPs against Fusarium oxysporum, a phytopathogenic fungus, showed a maximum percent radial growth inhibition of 82.00 ± 1.00% and a spore percent inhibition of 73.66 ± 3.94 for 150 μg/ml of biosynthesized AgNPs.

Photocatalytic nanocomposite membranes for environmental remediation

We report the design and one-pot synthesis of Ag-doped BiVO₄embedded in reduced graphene oxide (BiVO₄:Ag/rGO) nanocomposites via a hydrothermal processing route. The binary heterojunction photocatalysts exhibited high efficiency for visible light degradation of model dyes and were correspondingly used for the preparation of photocatalytic membranes using polyvinylidene fluoride (PVDF) or polyethylene glycol (PEG)-modified polyimide (PI), respectively. The surface and cross-section images combined with elemental mapping illustrated the effective distribution of the nanocomposites within the polymeric membranes. Photocatalytic degradation efficiencies of 61% and 70% were achieved after 5 h of visible light irradiation using BiVO₄:Ag/rGO@PVDF and BiVO₄:Ag/rGO@PI (PEG-modified) systems, respectively. The beneficial photocatalytic performance of the BiVO₄:Ag/rGO@PI (PEG-modified) membrane is explained by the higher hydrophilicity due to the PEG modification of the PI membrane. This work may provide a rational and effective strategy to fabricate highly efficient photocatalytic nanocomposite membranes with well-contacted interfaces for environmental purification.

Conversion of scrap iron into ultrafine α-Fe2O3 nanorods for the efficient visible light photodegradation of ciprofloxacin

The present study illustrates a feasible approach of utilizing scrap iron for the synthesis of iron(ii) oxide.

Insights into the degradation mechanisms and pathways of cephalexin during homogeneous and heterogeneous photo-Fenton processes

The widespread occurrence of antibiotics in the environment poses a potential threat to human health. The photo-Fenton process has demonstrated better degradation performance compared with the conventional wastewater treatment processes. In this study, the degradation of cephalexin was evaluated comparatively by homogeneous (Fe²⁺/H₂O₂/UV) and heterogeneous (MoS₂@Fe/H₂O₂/UV) photo-Fenton processes. Key influencing factors affecting photo-Fenton performance were assessed, confirming the optimum Fe²⁺ concentration at 0.2016 mg L^-1 and H₂O₂/Fe²⁺ molar ratio at 6. Higher degradation efficiency (73.10%) and pseudo-first-order degradation rate constant (0.0078 min^-1) were achieved with the assistance of MoS₂@Fe as the heterogeneous catalyst. Completely different degradation products were identified in the homogeneous and heterogeneous photo-Fenton processes, with main degradation pathways proposed as β-lactam ring-opening, sulfoxide formation, demethylation, N-dealkylation, decarbonylation, hydroxylation and deamination in the Fe²⁺/H₂O₂/UV system and β-lactam ring-opening, hydroxylation, dehydration, amide hydrolysis, and demethylation and ring contraction in the MoS₂@Fe/H₂O₂/UV system, respectively. The formation of newly identified products might root in the attack on cephalexin from active species (i.e., OH, h⁺, e^-, O₂^-) photoinduced by the MoS₂@Fe catalyst. Results also indicated the importance of understanding the underlying mechanisms and pathways to eliminate the antimicrobial activities of antibiotics in the future.

Degradation of fluoroquinolones in homogeneous and heterogeneous photo-Fenton processes: A review

Fluoroquinolone antibiotics are frequently detected in the environment causing potential hazards to ecological and human health. Inadequate removal efficiencies were reported for fluoroquinolones during conventional wastewater treatment processes whereas the application of photo-Fenton reactions has attracted much attention due to their high reaction rate. This article summarizes the recent proceedings on homogeneous and heterogeneous photo-Fenton degradation of fluoroquinolones. Degradation efficiencies of fluoroquinolones were discussed as well as rate constants for a distinct comparison. The influences of initial fluoroquinolone concentration, H₂O₂, Fe²⁺, pH and temperature were also investigated on homogeneous photo-Fenton degradation of fluoroquinolones. The currently applied heterogenous catalysts were considered including iron oxides catalysts, iron-based composite catalysts and iron-based semiconductor. In addition, the degradation pathways for typical fluoroquinolones were proposed with the products identified in the literature. The results indicated the better performance with the aid of heterogeneous catalysts due to the generation of more active species. Intermediate products at smaller molecular weight were obtained through various types of pathways under heterogeneous photo-Fenton degradation of fluoroquinolones, implying a practical application with biological treatment processes for fully mineralization.