Hydrogen-bonding in polymer blends

Imparting Ultrahigh Strength to Polymers via a New Concept Strategy of Construction of up to Duodecuple Hydrogen Bonding among Macromolecular Chains

Interconnecting macromolecules via multiple hydrogen bonds (H-bonds) can simultaneously strengthen and toughen polymers, but material synthesis becomes extremely difficult with increasing number of H-bonding donors and acceptors; therefore, most reports are limited to triple and quadruple H-bonds. Herein, this bottleneck is overcome by adopting a quartet-wise approach of constructing H-bonds instead of the traditional pairwise method. Thus, large multiple hydrogen bonds can be easily established, and the supramolecular interactions are further reinforced. Especially, when such multiple H-bond motifs are embedded in polymers, four macromolecular chains-rather than two as usual-are tied, distributing the applied stress over a larger volume and more significantly improving the overall mechanical properties. Proof-of-concept studies indicate that the proposed intermolecular multiple H-bonds (up to duodecuple) are readily introduced in polyurethane. A record-high tensile strength (105.2 MPa) is achieved alongside outstanding toughness (352.1 MJ m-3), fracture energy (480.7 kJ m-2), and fatigue threshold (2978.4 J m-2). Meantime, the polyurethane has acquired excellent self-healability and recyclability. This strategy is also applicable to nonpolar polymers, such as polydimethylsiloxane, whose strength (15.3 MPa) and toughness (50.3 MJ m-3) are among the highest reported to date for silicones. This new technique has good expandability and can be used to develop even more and stronger polymers.

Flexible Cages Enable Robust Supramolecular Elastomers

Advances in modern industrial technology continue to place stricter demands on engineering polymeric materials, but simultaneously possessing superior strength and toughness remains a daunting challenge. Herein, a pioneering flexible cage-reinforced supramolecular elastomer (CSE) is reported that exhibits superb robustness, tear resistance, anti-fatigue, and shape memory properties, achieved by innovatively introducing organic imide cages (OICs) into supramolecular networks. Intriguingly, extremely small amounts of OICs make the elastomer stronger, significantly improving mechanical strength (85.0 MPa; ≈10-fold increase) and toughness (418.4 MJ m-3; ≈7-fold increase). Significantly, the cooperative effect of gradient hydrogen bonds and OICs is experimentally and theoretically demonstrated as flexible nodes, enabling more robust supramolecular networks. In short, the proposed strengthening strategy of adding flexible cages effectively balances the inherent conflict between material strength and toughness, and the prepared CSEs are anticipated to be served in large-scale devices such as TBMs in the future.

Dynamic Thermosetting Resins with Synergistic Enhanced Strength and Toughness through Combination with Rigid and Soft Microdomains

Preparation of materials that possess highly strong and tough properties simultaneously is a great challenge. Thermosetting resins as a type of widely used polymeric materials without synergistic strength and toughness limit their applications in some special fields. In this report, an effective strategy to prepare thermosetting resins with synergistic strength and toughness, is presented. In this method, the soft and rigid microspheres with dynamic hemiaminal bonds are fabricated first, followed by hot-pressing to crosslink at the interfaces. Specifically, the rigid or soft microspheres are prepared via precipitation polymerization. After hot-pressing, the resulting rigid-soft blending materials exhibit superior strength and toughness, simultaneously. As compared with the precursor rigid or soft materials, the toughness of the rigid-soft blending films (RSBFs) is improved to 240% and 2100%, respectively, while the strength is comparable to the rigid precursor. As compared with the traditional crushing, blending, and hot-pressing of rigid or soft materials to get the nonuniform materials, the strength and toughness of the RSBFs are improved to 168% and 255%, respectively. This approach holds significant promise for the fabrication of polymer thermosets with a unique combination of strength and toughness.

Molecular dynamics simulation and non-isothermal crystallization kinetics of polyamide 4 and different bio-based polyamide blends

The effects of the structural units and blending ratio on the crystallization behavior of blends of polyamide 4 (PA4) with polyamide 56 (PA56) and polyamide 11 (PA11) were studied using molecular dynamics simulations and non-isothermal crystallization kinetics. The simulation results show that the crystallinity of PA4/PA56 blends (B4/56) with a PA56 content of 30-50% was 3.5-10.8% lower than that of B4/56 with a PA56 content of 20%, and the crystallinity of PA4/PA11 blends (B4/11) decreased by 9.5% as PA11 content increased from 20% to 50%. The experimental results show that both B4/56 and B4/11 form PA4- and PA56-rich (PA11-rich) phases through crystallization-induced phase separation. The interplanar spacing of the PA4-rich phase of B4/56 changed relative to that of PA4, indicating that some PA56 entered the PA4-rich phase unit cell. As the PA56 content increased from 20% to 50%, the crystallinity of B4/56 decreased by 11.2%, and the crystallization-induced phase separation grew distinct. The B4/56 with a higher PA4 content crystallized more easily. As the PA11 content increased from 20% to 50%, the crystallinity of B4/11 decreased by 12.5%, and PA11 barely participated in the crystallization of the PA4-rich phase. The blending ratio had no significant effect on the crystallization rate and crystal-growth degree of B4/11, and the non-isothermal crystallization activation energy of B4/11 was significantly higher than that of B4/56, indicating that the crystallization ability of the B4/11 blend system is worse. This study provides a theoretical basis for the design and performance regulation of PA4-based polyamide blends.

Biodegradable Block Poly(ester amine)s with Pendant Hydroxyl Groups for Biomedical Applications

The article presents the results of the synthesis and characteristics of the amphiphilic block terpolymers, built of a hydrophilic polyesteramine block, and hydrophobic blocks made of lactidyl and glycolidyl units. These terpolymers were obtained during the copolymerization of L-lactide with glycolide carried out in the presence of previously produced macroinitiators with protected amine and hydroxyl groups. The terpolymers were prepared to produce a biodegradable and biocompatible material containing active hydroxyl and/or amino groups, with strong antibacterial properties and high surface wettability by water. The control of the reaction course, the process of deprotection of functional groups, and the properties of the obtained terpolymers were made based on 1H NMR, FTIR, GPC, and DSC tests. Terpolymers differed in the content of amino and hydroxyl groups. The values of average molecular mass oscillated from about 5000 g/mol to less than 15,000 g/mol. Depending on the length of the hydrophilic block and its composition, the value of the contact angle ranged from 50° to 20°. The terpolymers containing amino groups, capable of forming strong intra- and intermolecular bonds, show a high degree of crystallinity. The endotherm responsible for the melting of L-lactidyl semicrystalline regions appeared in the range from about 90 °C to close to 170 °C, with a heat of fusion from about 15 J/mol to over 60 J/mol.

Two-photon microscopy as a visual tool for polymer compatibilization monitoring: the PE-EVOH case

In this study, we present two-photon microscopy (2PM) as an original technique to investigate the compatibilization between PE-HEMA and EVOH at the sub-micrometer level, both on the surface and in the bulk. 2PM is a nonlinear fluorescence imaging technique commonly exploited for thick biological tissue analysis. Here, we use 2PM to visualize polymer blending through 3D images of the obtained films. Compatibilization was performed in solution, upon functionalization of PE-HEMA with 1.4% molar of ODIN, a fluorescent molecule able to form multiple hydrogen bonds with EVOH and to act as a fluorescent probe. Different blends were synthesized, and the obtained films were analyzed by 2PM. For all compositions, it was demonstrated that ODIN is evenly distributed both on the surface and in the bulk. 2PM analysis of the thermally reprocessed specimen revealed that repeated reprocessing allows the reformation of ODIN dimers as the most stable H-bonding array in the solid state, partially reversing the compatibilization.

Development of buccal film formulations and their mucoadhesive performance in biomimetic models

When developing buccal films for oromucosal drug administration, adhesion is essential to ensure sufficient time for permeation of the active ingredient(s) through the oral mucosa and avoid the detachment and subsequent swallowing of the film. In this study, biomimetic materials were evaluated as a replacement for buccal mucosa in mucoadhesion testing and potential adhesives were compared regarding their suitability to increase the adhesion of hypromellose-based oromucosal films. Gelatin gels, as possible biomimetics, failed to mimic the buccal mucosa. Furthermore, esophageal tissue lead to a wider variance of adhesion data despite showing a good correlation with buccal tissue. A synthetic copolymer hydrogel based on hydroxyethylmethacrylate (HEMA) and N-acryloyl glucosamine (AGA) was able to mimic the buccal mucosa in these tests and reduced the variation in the data compared to animal tissue. Adding polyacrylic acid and polyvinylpyrrolidone to the film formulations at a concentration of 5% w/w approximately doubled the maximum detachment force and work of adhesion. Sodium alginate enhanced the adhesive properties moderately but adding chitosan did not significantly increase mucoadhesion. Polyvinylpyrrolidone and polyacrylic acid are rated as strong adhesion enhancers for buccal films and the HEMA/AGA hydrogel is considered as a suitable alternative for animal mucosa in mucoadhesion testing.

Blend Miscibility of Poly(ethylene terephthalate) and Aromatic Polyesters from Salicylic Acid

Poly(ethylene terephthalate) (PET) is one of the most prevalent polymers in the world due to its combined thermal, mechanical, and gas barrier attributes. Blending PET with other polymers is an appealing strategy to further tailor properties to meet the needs of an even more diverse range of applications. Most blends with PET are macrophase-separated; only a few miscible systems have been reported. Here, the miscibility of the aromatic polyesters poly(salicylic glycolide) (PSG) and poly(salicylic methyl glycolide) (PSMG) with PET is described. Both PSG and PSMG have similar chemical structures to PET but are derived from sustainable resources and readily degradable. This study suggests that they are fully miscible with PET over the entire composition range, which is attributed to favorable interactions with PET. Negative polymer-polymer interaction parameters (χ) were determined using Flory-Huggins theory to describe melting temperature variations in the blends. In addition, the PET blends showed mechanical properties that are intermediate between the two homopolymers.

Development of Coarse-Grained Models for Poly(4-vinylphenol) and Poly(2-vinylpyridine): Polymer Chemistries with Hydrogen Bonding

In this paper, we identify the modifications needed in a recently developed generic coarse-grained (CG) model that captured directional interactions in polymers to specifically represent two exemplary hydrogen bonding polymer chemistries-poly(4-vinylphenol) and poly(2-vinylpyridine). We use atomistically observed monomer-level structures (e.g., bond, angle and torsion distribution) and chain structures (e.g., end-to-end distance distribution and persistence length) of poly(4-vinylphenol) and poly(2-vinylpyridine) in an explicitly represented good solvent (tetrahydrofuran) to identify the appropriate modifications in the generic CG model in implicit solvent. For both chemistries, the modified CG model is developed based on atomistic simulations of a single 24-mer chain. This modified CG model is then used to simulate longer (36-mer) and shorter (18-mer and 12-mer) chain lengths and compared against the corresponding atomistic simulation results. We find that with one to two simple modifications (e.g., incorporating intra-chain attraction, torsional constraint) to the generic CG model, we are able to reproduce atomistically observed bond, angle and torsion distributions, persistence length, and end-to-end distance distribution for chain lengths ranging from 12 to 36 monomers. We also show that this modified CG model, meant to reproduce atomistic structure, does not reproduce atomistically observed chain relaxation and hydrogen bond dynamics, as expected. Simulations with the modified CG model have significantly faster chain relaxation than atomistic simulations and slower decorrelation of formed hydrogen bonds than in atomistic simulations, with no apparent dependence on chain length.

Characterization and antimicrobial effect of a bioinspired thymol coating formed on titanium surface by one-step immersion treatment

OBJECTIVE

To develop an antimicrobial and anti-adherent thymol (TOH)-containing coating on titanium (Ti) by a bioinspired one-step biocompatible method.

METHODS

A nanolayer of adsorbed TOH (TOH-NL-Ti) was formed by an easy deep coating method on Ti surface. The treatment consists in a simple one-step immersion process in a TOH-containing solution. Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR), potentiodynamic electrochemical technique, open circuit potential records, Atomic Force Microscopy (AFM) and measurements of TOH release were used to characterize TOH-NL-Ti. Live/Dead staining and plate counting were employed to quantify attached and living adhered bacteria, respectively. Biocompatibility and cytotoxicity in fibroblastic and pre-osteoblastic cell lines were evaluated by acridine orange staining and MTT assay, respectively.

RESULTS

TOH adsorbed on TOH-NL-Ti was detected by ATR-FTIR and electrochemical techniques. ATR-FTIR results showed that TOH nanofilms development involves spontaneous production of ketonic structures on Ti surface. AFM analysis revealed that the thickness of the TOH-NL was below 80 nm. Finally, microbiological assays confirmed that TOH-NL-Ti can inhibit the adhesion and kill attached bacteria leading to the eradication of leaving cells on its surface. After 24 h of biocidal release, the antimicrobial effect is also significant (a decrease of 3 orders in the number of attached bacteria).

SIGNIFICANCE

The formation of TOH-NL-Ti nanolayer is a simple strategy able to be applied by not specially trained personnel, to reduce implant infection risks, ensure highly effective antimicrobial action and inhibition of bacterial adhesion on Ti surfaces without showing toxic effects for pre-osteoblastic and fibroblastic cells.

The Physiochemical Properties and Adsorption Characteristics of Processed Pomelo Peel as a Carrier for Epigallocatechin-3-Gallate

The NaOH-HCl- and ethanol-pretreated pomelo peel samples were prepared to apply to the batch adsorption for epigallocatechin-3-gallate (EGCG). The characteristics of peel samples were determined by Fourier transform infrared spectroscopy, scanning electron microscopy and a laser particle analyzer. The results of the physiochemical properties of the peel samples demonstrate that these peel samples have a promising adsorption capacity for EGCG, because of the increased potential binding sites on the surface compared with those of untreated peel samples. These two peel samples showed enhanced adsorption capacities of EGCG compared with that of unmodified peel in terms of the isothermal adsorption process, which could be described by both Langmuir and Freundlich models, with the theoretical maximum adsorption capacity of 77.52 and 94.34 mg g−1 for the NaOH-HCl and ethanol-treated peel samples, respectively. The adsorption kinetics demonstrated an excellent fitness to pseudo-second-order, showing that chemisorption was the rate-limiting step. The thermodynamics analysis revealed that the adsorption reaction was a spontaneous and endothermic process. This work highlights that the processed pomelo peels have outstanding adsorption capacities for EGCG, which could be promising candidates for EGCG delivering in functional food application.

100th Anniversary of Macromolecular Science Viewpoint: Modeling and Simulation of Macromolecules with Hydrogen Bonds: Challenges, Successes, and Opportunities

Macromolecular materials with directional interactions such as hydrogen bonds exhibit numerous attractive features in terms of structure, thermodynamics, and dynamics. Besides enabling precise tuning of desirable geometries in the assembled state (e.g., programmable coordination numbers depending on the valency of the directional interaction), mixing in a blend/composite through stabilization via hydrogen bonds between the various components, hydrogen bonds can also impart responsiveness to external stimuli (e.g., temperature, pH). In biomacromolecules (e.g., proteins, DNA, polysaccharides), hydrogen bonds play a key role in stabilizing secondary and tertiary structures, which in turn define the function of these macromolecules. In this Viewpoint, I present the challenges, successes, and opportunities for molecular modeling and simulations to conduct fundamental and application-focused research on macromolecular materials with hydrogen bonding interactions. The past successes and limitations of atomistic simulations are discussed first, followed by highlights from recent developments in coarse-grained modeling and their use in studies of (synthetic and biologically relevant) macromolecular materials. Model development focused on polynucleotides (e.g., DNA, RNA, etc.), polypeptides, polysaccharides, and synthetic polymers at experimentally relevant conditions are highlighted. This viewpoint ends with potential future directions for macromolecular modeling and simulations with other types of directional interactions beyond hydrogen bonding.

Detection of carvacrol in essential oils by electrochemical polymerization

Carvacrol (Carv) and thymol (TOH), components of essential oils, are known by their antimicrobial and antioxidant activity. However, Carv but not TOH seems to be the responsible of anti-inflammatory and inhibition of Cu corrosion properties. Since Carv and TOH are positional isomers, their identification is tricky and GC-MS is usually required. To find simple and inexpensive methods that allow the detection of Carv in presence of TOH (e.g. essential oils), cyclic voltammetry and chronoamperometry tests using Pt and Cu as electrodes in TOH and Carv containing mixtures and essential oils were made. Electrochemical and ATR-FTIR results show that pure phytocompounds and mixtures lead to the formation of polymeric layers on both metallic surfaces. Results show that only Cu is suitable for Carv detection. Potentiostatic and potentiodynamic detection is simple and conclusive in Carv + TOH mixtures and in essential oils due to the formation of a homogeneous blocking Carv electropolymeric layer on Cu.

Tuning the Wettability and Surface Free Energy of Poly(vinylphenol)Thin Films by Modulating Hydrogen-Bonding Interactions

The ability to tune the surface properties of a polymer film in a simple and effective manner is important for diverse biological, industrial, and environmental applications. In this work, we investigated whether or not the surface free energy of poly(vinyl phenol; PVPh) can be tuned by adjusting the casting solvent and the thermal treatment time, which alters the proportions of intra-and intermolecular hydrogen bonding interactions. Compared to the untreated sample, in tetrahydrofuran (THF) system, the thermal treatment resulted in a lower proportion of intermolecular hydrogen bonds and a concomitant decrease in the surface free energy (from 39.3 to 18.8 mJ/m²). In contrast, the thermal treatment in propylene glycol methyl ether acetate (PGMEA) and ethyl-3-ethoxypropionate (EEP) systems increased the proportion of intermolecular hydrogen bonds and the surface free energy of the polymer thin films, from 45.0 to 54.3 mJ/m² for PGMEA and from 45.5 to 52.9 mJ/m² for EEP. Controlling intermolecular hydrogen-bonding interactions is a unique and easy method for tuning the surface free energies of polymer substances.

Structures and properties of three new homobinuclear nanosized supramolecular copper coordination polymers derived from carboxylate type ligands and benzimidazole

Three new homobinuclear nanosized supramolecular copper coordination polymers are hydrothermally synthesized by self-assembly reaction of L-tyrosine (Tyr), terephthalic acid (H2bdc), pyromellitic acid (H4btec) and benzimidazole (Hbzim) with copper chloride salt to generate with formula [[Cu2(tyr)2(bzim)2(Cl)2(H2O)2]]n 1, [[Cu2(bdc)2(bzim)2(H2O)6].3H2O]n 2 and [Cu2(H2btec)(bzim)(H2O)6].2H2O]n 3, which have been investigated by elemental analysis, molar conductivity and magnetic measurements, FT-IR and UV-Vis spectroscopy, (TGA/DTA) thermal analysis and X-ray powder diffraction(XRPD) analysis as well as MM2 theoretical calculations. The magnetic moment and electronic spectra of the complexes are certainly indicating the octahedral geometries. Thermal analysis of the complexes confirms the suggested structures and thermal stability. The results of the XRPD analysis and the average nanosized values of the complexes have nanosized supramolecular polymers in the triclinic system. The MM2 theoretical calculations are supported by the proposed structures.

Physical gels of poly(vinylamine) by thermal curing

Physical gels are a versatile class of materials which can find application in sensors, electrochemistry, biomedicine or rheological modifiers. Herein, we present a hydrogen-bonded physical gel which is based on the interaction between phenylcarbonate telechelic poly(ethylene glycol) (PEG-PC) and poly(vinyl amine-co-acetamide) (p(VAm-co-VAA)). The critical gelation concentration was found to be 10 wt% by rheology and NMR. UV-vis spectroscopy and dynamic light scattering reveal the formation of aggregates in the gel. Rheology and differential scanning calorimetry (DSC) was used to show the effect of thermal curing on the mechanical properties of the physical gel.

Repeated heating cooling cycles can anneal inhomogeneity in physical gels and significantly improve their mechanical properties.

Assembly of miscible supramolecular network blends using DDA·AAD hydrogen-bonding interactions of pendent side-chains

Miscible blends of poly(methyl methacrylate) and polystyrene polymers are assembled through triple hydrogen bonding between complementary ureidoimidazole and amidoisocytosine heterodimers.

Effect of different pH environments on the durability of bonds between zirconia and Ti-6Al-4V

This study investigated the role played by different pH environments in the deterioration of bonds between Y-TZP and Ti-6Al-4V. One hundred and thirty-five specimens were randomly assigned to one of the following storage media at 37°C: (1) distilled water, pH 6.9, DW; (2) acidic solution, pH 1-2, CS; and (3) alkaline solution, pH 10-11, KS. Shear bond strength (SBS) tests were carried out at the 4-, 14-, and 30-day storage time intervals. The morphology characteristics and elements distribution of the fracture surfaces were analyzed. CS-30 showed the lowest mean SBS and the least amount of residual cement on the Ti-6Al-4V surface after the SBS tests. Bond strength tended to decrease with increasing storage time for the acidic group. Alkaline and neutral media showed little influence on the SBS of Y-TZP to Ti-6Al-4V in 30 days. Acidic environments should be properly avoided to obtain reliable long-term bonding strength between Ti-6Al-4V and Y-TZP.

Glass Transition Behaviors of Poly (Vinyl Pyridine)/Poly (Vinyl Phenol) Revisited

We examined the composition and molecular weight dependence of the glass transition temperature in detail for two types of hydrogen bonding miscible blends: poly (2-vinyl pyridine)/poly (vinyl phenol) (2VPy/VPh) and poly (4-vinyl pyridine)/poly (vinyl phenol) (4VPy/VPh). Regarding the functional form of the glass transition temperature, Tg, as a function of the weight fraction, we found a weak deviation from the Kwei equation for 2VPy/VPh blends. In contrast, such a deviation was not observed for the 4VPy/VPh blend. By relating the difference in the functional forms of Tg between the two blend systems to the difference in hydrogen bonding ability, we proposed a modified version of the Kwei equation. As for the interaction parameter, q in the Kwei equation, clear molecular weight dependence was observed for 2VPy/VPh blends: the lower the VPh molecular weight in the oligomer level, the higher the q values, suggesting the higher hydrogen bonding formability near the polymer chain ends than the middle part of a polymer chain.