Fabrication of protein-loaded PLGA nanoparticles: effect of selected formulation variables on particle size and release profile

Development, Optimization, and in vitro Evaluation of Silybin-loaded PLGA Nanoparticles and Decoration with 5TR1 Aptamer for Targeted Delivery to Colorectal Cancer Cells

Chemotherapeutic agents often lack specificity, intratumoral accumulation, and face drug resistance. Targeted drug delivery systems based on nanoparticles (NPs) mitigate these issues. Poly (lactic-co-glycolic acid) (PLGA) is a well-studied polymer, commonly modified with aptamers (Apts) for cancer diagnosis and therapy. In this study, silybin (SBN), a natural agent with established anticancer properties, was encapsulated into PLGA NPs to control delivery and improve its poor solubility. The field-emission scanning electron microscopy (FE-SEM) showed spherical and uniform morphology of optimum SBN-PLGA NPs with 138.57±1.30nm diameter, 0.202±0.004 polydispersity index (PDI), -16.93±0.45mV zeta potential (ZP), and 70.19±1.63% entrapment efficiency (EE). The results of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) showed no chemical interaction between formulation components, and differential scanning calorimetry (DSC) thermograms confirmed efficient SBN entrapment in the carrier. Then, the optimum formulation was functionalized with 5TR1 Apt for active targeted delivery of SBN to colorectal cancer (CRC) cells in vitro. The SBN-PLGA-5TR1 nanocomplex released SBN at a sustained and constant rate (zero-order kinetic), favoring passive delivery to acidic CRC environments. The MTT assay demonstrated the highest cytotoxicity of the SBN-PLGA-5TR1 nanocomplex in C26 and HT29 cells and no significant cytotoxicity in normal cells. Apoptosis analysis supported these results, showing early apoptosis induction with SBN-PLGA-5TR1 nanocomplex which indicated this agent could cause programmed death more than necrosis. This study presents the first targeted delivery of SBN to cancer cells using Apts. The SBN-PLGA-5TR1 nanocomplex effectively targeted and suppressed CRC cell proliferation, providing valuable insights into CRC treatment without harmful effects on healthy tissues.

Nanosphere pharmacodynamics improves safety of immunostimulatory cytokine therapy

Systemic administration of interleukin (IL)-12 induces potent anti-tumor immune responses in preclinical cancer models through the systemic activation of effector immune cells and release of proinflammatory cytokines. IL-12-loaded PLGA nanospheres (IL12ns) are hypothesized to improve therapeutic efficacy and thwart unwanted side effects observed in previous human clinical trials. Through the investigation of peripheral blood and local tissue immune responses in healthy BALB/c mice, the immune-protective pharmacodynamics of IL12ns were suggested. Nanospheres increased pro-inflammatory plasma cytokines/chemokines (IFN-γ, IL-6, TNF-α, and CXCL10) without inducing maladaptive transcriptomic signatures in circulating peripheral immune cells. Gene expression profiling revealed activation of pro-inflammatory signaling pathways in systemic tissues, the likely source of these effector cytokines. These data support that nanosphere pharmacodynamics, including shielding IL-12 from circulating immune cells, depositing peripherally in systemic immune tissues, and then slowly eluting bioactive cytokine, thereafter, are essential to safe immunostimulatory therapy.

Microfluidic-assisted preparation of PLGA nanoparticles loaded with insulin: a comparison with double emulsion solvent evaporation method

Poly lactic-co-glycolic acid (PLGA) is an ideal polymer for the delivery of small and macromolecule drugs. Conventional preparation methods of PLGA nanoparticles (NPs) result in poor control over NPs properties. In this research, a microfluidic mixer was designed to produce insulin-loaded PLGA NPs with tuned properties. Importantly; aggregation of the NPs through the mixer was diminished due to the coaxial mixing of the precursors. The micromixer allowed for the production of NPs with small size and narrow size distribution compared to the double emulsion solvent evaporation (DESE) method. Furthermore, encapsulation efficiency and loading capacity indicated a significant increase in optimized NPs produced through the microfluidic method in comparison to DESE method. NPs prepared by the microfluidic method were able to achieve a more reduction of trans-epithelial electrical resistance values in the Caco-2 cells compared to those developed by the DESE technique that leads to greater paracellular permeation. Compatibility and interaction between components were evaluated by differential scanning calorimetry and fourier transform infrared analysis. Also, the effect of NPs on cell toxicity was investigated using MTT test. Numerical simulations were conducted to analyze the effect of mixing patterns on the properties of the NPs. It was revealed that by decreasing flow rate ratio, i.e. flow rate of the organic phase to the flow rate of the aqueous phase, mixing of the two streams increases. As an alternative to the DESE method, high flexibility in modulating hydrodynamic conditions of the microfluidic mixer allowed for nanoassembly of NPs with superior insulin encapsulation at smaller particle sizes.

Regulation of the P53 tumor suppressor gene and the Mcl-2 oncogene expression by an active herbal component delivered through a smart thermo-pH-sensitive PLGA carrier to improve Osteosarcoma treatment

Osteosarcoma (OS), a lethal malignancy, has witnessed an escalating incidence rate. Contemporary therapeutic strategies for this cancer have proven to be inadequate, primarily due to their extensive side effects and the lack of specificity in targeting the molecular pathways implicated in this disease. Consequently, this project is aimed to manufacture and characterize Poly (Lactic-co-glycolic acid) embodying curcumin, a phytocompound devoid of adverse effects which not only exerts an anti-neoplastic influence but also significantly modulates the genetic pathways associated with this malignancy. In this investigation, multiple formulations of PLGA-Cur were synthesized, and the choice of optimal formula was made considering the efficiency of nanoparticle encapsulation and the drug dispersion rate from synthesized PLGA. The selected formulation's physical and chemical attributes, such as its dimension, polydispersity index of the formulation, surface electrical charge, physical-spatial structure, and stability, were examined using methods, including Dynamic light scattering (DLS), Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM), and spectrophotometry. Subsequently, the absence of interaction between the drug and the system was assessed using Fourier Transform Infrared Spectroscopy (FT-IR), and cellular uptake was evaluated using fluorescence microscopy. The smart system's responsiveness to environmental stimuli was determined using the dialysis bag method and its anti-tumor properties were investigated on the SAOS-2 cell line. Finally, to evaluate the system's genetic impact on bone cancer, the molecular quantification of the P53 tumor suppressor gene and the oncogene MCL-2 was analyzed using real-time PCR and their protein expression levels were also examined. The PLGAs synthesized in this study exhibited an encapsulation rate of 91.5 ± 1.16% and a maximum release rate of 71 ± 1%, which were responsive to various stimuli. The size of the PLGAs was 12.5 ± 321.2 nm, with an electric charge of -38.9 ± 2.6 mV and a PDI of 0.107, indicating suitable morphology and stability. Furthermore, both the system and the drug retained their natural properties after inoculation. The system was readily absorbed by cancer cells and effectively exerted its anti-cancer properties. Notably, the system had a significant impact on the mentioned genes' expression. The produced nanosystem, possessing optimal physicochemical properties, has the potential to enhance the anti-cancer efficacy of curcumin. This is achieved by altering molecular and genetic pathways within cancer cells, thereby positioning it as a viable adjunctive treatment modality and also synthesizing of this herbal base drug system consider as a completely novel method for cancer therapy that can efficiently modulate genetical pathways involved.

Optimizing the synthesis of interleukin-12-loaded PLGA nanospheres (rmIL-12ns) via ultrasonication for treatment of metastatic osteosarcoma

Clinical trials exploring bolus intravenous delivery of interleukin-12 (IL-12) for treatment of solid tumors ultimately failed due to lack of clinical response and severe dose-limiting toxicities. The present study was conducted to evaluate whether recombinant murine IL-12 (rmIL-12) could be successfully encapsulated within Poly (D, l-lactide-co-glycolide) (PLGA) nanospheres (rmIL-12ns) for safe and effective systemic delivery at pharmacologic scale. Optimal fabrication of rmIL-12ns occurs with dichloromethane as the organic solvent and emulsion formation via ultrasonication at 50% power (250 W sonicator) for 10 s (50W10s). We then determined whether utilization of synthesis modifiers including fetal bovine serum (FBS), magnesium hydroxide [Mg(OH)2 ], trehalose, or the surfactants polysorbate 80 and Span 60 alone or in combination could increase the encapsulation efficiency (EE) and/or modify the burst elution profile characteristic of the 50W10s rmIL-12ns formulation. The greatest EEs compared to the unmodified formulation were measured with modifications containing the surfactants polysorbate 80 and Span 60 (surfactant: 28.3 ± 6.10%, p = 0.29 and Surf/FBS: 85.4 ± 2.19%, p = 0.039). The Surf/FBS formulation was further modified for in vivo murine injection by substituting FBS with mouse serum albumin (MSA). The resulting Surf/MSA rmIL-12ns were then characterized before delivery at three doses (0.1, 1, and 10 mg rmIL-12ns) in our established murine model of metastatic osteosarcoma to assess efficacy. Preliminary results suggested no evidence of disease with delivery of the 0.1 mg dose in 75% of mice (3 of 4) versus a nontreated historical control (2 of 34).

Synthesis and Evaluation of BSA-Loaded PLGA-Chitosan Composite Nanoparticles for the Protein-Based Drug Delivery System

The purpose of this study was to synthesize composite nanoparticles (NPs) based on poly(d,l-lactic-co-glycolic acid) (PLGA) and chitosan (CS) and evaluate their suitability for the delivery of protein-based therapeutic molecules. Composite NPs possess a unique property which is not exhibited by any other polymer. Unlike other polymers, only the composite NPs lead to improved transfection efficiency and sustained release of protein. The composite NP were prepared by grafting CS on the surface of PLGA NPs through EDC-NHS coupling reaction. The size of bovine serum albumin (BSA)-loaded PLGA NPs and BSA-loaded PLGA-CS composite NPs was 288 ± 3 and 363 ± 4 nm, respectively. The zeta potential of PLGA NPs is -18 ± 0.23, and that of composite particles is 19 ± 0.40, thus confirming the successful addition of CS on the surface of PLGA NPs. Composite NPs were characterized using dynamic light scattering, scanning/transmission electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, release profile, and gel electrophoresis. The encapsulation efficiency of PLGA NPs was 88%. These composite NPs were easily uptaken by the A549 cell line with no or minimal cytotoxicity. The present study emphasizes that the composite NPs are suitable for delivery of BSA into the cells with no cytotoxicity or very little cytotoxicity, while maintaining the integrity of the encapsulated BSA.

Non-Invasive, Targeted Nanoparticle-Mediated Drug Delivery across a Novel Human BBB Model

The blood-brain barrier (BBB) is a highly sophisticated system with the ability to regulate compounds transporting through the barrier and reaching the central nervous system (CNS). The BBB protects the CNS from toxins and pathogens but can cause major issues when developing novel therapeutics to treat neurological disorders. PLGA nanoparticles have been developed to successfully encapsulate large hydrophilic compounds for drug delivery. Within this paper, we discuss the encapsulation of a model compound Fitc-dextran, a large molecular weight (70 kDa), hydrophilic compound, with over 60% encapsulation efficiency (EE) within a PLGA nanoparticle (NP). The NP surface was chemically modified with DAS peptide, a ligand that we designed which has an affinity for nicotinic receptors, specifically alpha 7 nicotinic receptors, found on the surface of brain endothelial cells. The attachment of DAS transports the NP across the BBB by receptor-mediated transcytosis (RMT). Assessment of the delivery efficacy of the DAS-conjugated Fitc-dextran-loaded PLGA NP was studied in vitro using our optimal triculture in vitro BBB model, which successfully replicates the in vivo BBB environment, producing high TEER (≥230 ) and high expression of ZO1 protein. Utilising our optimal BBB model, we successfully transported fourteen times the concentration of DAS-Fitc-dextran-PLGA NP compared to non-conjugated Fitc-dextran-PLGA NP. Our novel in vitro model is a viable method of high-throughput screening of potential therapeutic delivery systems to the CNS, such as our receptor-targeted DAS ligand-conjugated NP, whereby only lead therapeutic compounds will progress to in vivo studies.

Surface Functionalization of Polymer Particles for Cell Targeting by Modifying Emulsifier Chemistry

The oil in water emulsion/solvent extraction method is used to fabricate many FDA approved, polymer particle formulations for drug delivery. However, these formulations do not benefit from surface functionalization that can be achieved through tuning particle surface chemistry. Poly(vinyl alcohol) (PVA) is the emulsifier used for many FDA approved formulations and remains associated with the particle surface after fabrication. We hypothesized that the hydroxyl groups in PVA could be conjugated with biomolecules using isothiocyanate chemistry and that these modifications would endow the particle surface with additional functionality. We demonstrate that fluorescein isothiocyanate and an isothiocyanate derivatized mannose molecule can be covalently attached to PVA in a one-step reaction. The modified PVA polymers perform as well as unmodified PVA in acting as an emulsifier for fabrication of poly(lactide-co-glycolide) particles. Particles made with the fluorescein modified PVA exhibit fluorescence confined to the particle surface, while particles made with mannose modified PVA bind concanavalin A. In addition, mannose modified PVA increases particle association with primary macrophages by three-fold. Taken together, we present a facile method for modifying the surface reactivity of polymer particles widely used for drug delivery in basic research and clinical practice. Given that methods are established for conjugating the isothiocyanate functional group to a wide range of biomolecules, our approach may enable PVA based biomaterials to engage a multitude of biological systems.

Development of mucoadhesive modified kappa-carrageenan/pectin patches for controlled delivery of drug in the buccal cavity

In this study, modified kappa-carrageenan/pectin hydrogel patches were fabricated for treatment of buccal fungal infections. For this purpose, kappa-carrageenan-g-acrylic acid was modified with different thiolated agents (L-cysteine and 3-mercaptopropionic acid), and the thiol content of the resulting modified kappa-carrageenan was confirmed by elemental analyzer. Then, the hydrogel patches were fabricated, and characterized by Fourier-transform infrared spectroscopy, thermogravimetric analysis, ex vivo mucoadhesion test, and swelling behavior. Triamcinolone acetonide was added either directly or by encapsulating within the poly(lactic-co-glycolic acid) nanoparticles. The release amount of the drug from the directly loaded patch was 7.81 mg/g polymer, while it was 3.28 mg/g polymer for the encapsulated patch with the same content at 7 hr. The hydrogel patches had no cytotoxicity by cell culture studies. Finally, the drug loaded hydrogel patches were demonstrated antifungal activity against Aspergillus fumigatus and Aspergillus flavus. These results provide that the novel modified kappa-carrageenan and pectin based buccal delivery system has promising antifungal property, and could have advantages compared to conventional buccal delivery systems.

Cholesterol-Based Nanovesicles Enhance the In Vitro Cytotoxicity, Ex Vivo Intestinal Absorption, and In Vivo Bioavailability of Flutamide

Critical adverse effects and frequent administration, three times per day, limit the use of flutamide (FLT) as a chemotherapeutic agent in the treatment of prostate cancer. Therefore, our research aimed to develop new cholesterol-based nanovesicles for delivering FLT to malignant cells in an endeavor to maximize its therapeutic efficacy and minimize undesired adverse effects. Draper–Lin small composite design was used to optimize the critical quality attributes of FLT-loaded niosomes and ensure the desired product quality. The influence of the selected four independent variables on mean particle size (Y₁), zeta potential (Y₂), drug entrapment efficiency (Y₃), and the cumulative drug release after 24 h (Y₄) was examined. The optimized nanovesicles were assessed for their in vitro cytotoxicity, ex-vivo absorption via freshly excised rabbit intestine as well as in vivo pharmacokinetics on male rats. TEM confirmed nanovescicles’ spherical shape with bilayer structure. Values of dependent variables were 748.6 nm, −48.60 mV, 72.8% and 72.2% for Y₁, Y₂, Y₃ and Y₄, respectively. The optimized FLT-loaded niosomes exerted high cytotoxic efficacy against human prostate cancer cell line (PC-3) with an IC₅₀ value of 0.64 ± 0.04 µg/mL whilst, it was 1.88 ± 0.16 µg/mL for free FLT. Moreover, the IC₅₀ values on breast cancer cell line (MCF-7) were 0.27 ± 0.07 µg/mL and 4.07 ± 0.74 µg/mL for FLT-loaded niosomes and free FLT, respectively. The permeation of the optimized FLT-loaded niosomes through the rabbit intestine showed an enhancement ratio of about 1.5 times that of the free FLT suspension. In vivo pharmacokinetic study displayed an improvement in oral bioavailability of the optimized niosomal formulation with AUC and C_max values of 741.583 ± 33.557 μg/mL × min and 6.950 ± 0.45 μg/mL compared to 364.536 ± 45.215 μg/mL × min and 2.650 ± 0.55 μg/mL for the oral FLT suspension. With these promising findings, we conclude that encapsulation of FLT in cholesterol-loaded nanovesicles enhanced its anticancer activity and oral bioavailability which endorse its use in the management of prostate cancer.

Protein Immobilization on Heterogeneous (SiO2/ZnO) Hollow-Mesoporous Nanocapsules Prepared by Imprinting CPMV: Drug Delivery and Possibility of Immunological Applications

Herein, we report the protein immobilization and stability studies of heterogeneous hollow mesoporous nanocapsules (Hhmn) for drug and protein delivery. The final results of the diverse precursors such as TEOS, TMOS, APTES, and zinc acetate on the formation of the hollow-mesoporous architecture of nanocapsules have been assimilated in this work. Three types of Hhmn of various sizes were synthesized. Among the three Hhmn, sample I and II nanocapsules were synthesized in the presence of zinc acetate and were identified to be amorphous in nature. Sample III nanocapsules synthesized in the absence of zinc acetate were analogous to the other two synthesized samples. Physiochemical analysis showed the formation of zinc phosphate in the silica matrix for the samples when synthesized with zinc acetate. Specific surface area analysis revealed that sample III has a relatively higher specific surface area. Further, the drug/dye loading and release capacity for the nanocapsules were studied using doxorubicin (DOX) and imatinib mesylate (IM) as model anticancerous drugs and rhodamine 6G as a model dye. Among the synthesized nanocapsules, sample III was shown to have a higher loading capacity for DOX (∼128 μg). From the release kinetic studies of drug/dye, sample III nanocapsules demonstrate a controlled release pattern of DOX and IM. Additionally, protein adsorption and stability studies of samples I and II revealed that the BSA adsorption capacity increases with the increase in the initial concentration of BSA. Furthermore, analysis of the release profiles of BSA and OVA leads to the conclusion that the heterogeneous nanocapsules show a higher loading capacity and sustained release pattern toward OVA. These properties of the nanocapsules highlight their path to immunological applications.

Translating the fabrication of protein-loaded poly(lactic-co-glycolic acid) nanoparticles from bench to scale-independent production using microfluidics

In the formulation of nanoparticles, poly(lactic-co-glycolic acid) (PLGA) is commonly employed due to its Food and Drug Administration and European Medicines Agency approval for human use, its ability to encapsulate a variety of moieties, its biocompatibility and biodegradability and its ability to offer a range of controlled release profiles. Common methods for the production of PLGA particles often adopt harsh solvents, surfactants/stabilisers and in general are multi-step and time-consuming processes. This limits the translation of these drug delivery systems from bench to bedside. To address this, we have applied microfluidic processes to develop a scale-independent platform for the manufacture, purification and monitoring of nanoparticles. Thereby, the influence of various microfluidic parameters on the physicochemical characteristics of the empty and the protein-loaded PLGA particles was evaluated in combination with the copolymer employed (PLGA 85:15, 75:25 or 50:50) and the type of protein loaded. Using this rapid production process, emulsifying/stabilising agents (such as polyvinyl alcohol) are not required. We also incorporate in-line purification systems and at-line particle size monitoring. Our results demonstrate the microfluidic control parameters that can be adopted to control particle size and the impact of PLGA copolymer type on the characteristics of the produced particles. With these nanoparticles, protein encapsulation efficiency varies from 8 to 50% and is controlled by the copolymer of choice and the production parameters employed; higher flow rates, combined with medium flow rate ratios (3:1), should be adopted to promote higher protein loading (% wt/wt). In conclusion, herein, we outline the process controls for the fabrication of PLGA polymeric nanoparticles incorporating proteins in a rapid and scalable manufacturing process. Scale-independent production of polymer nanoparticles.

Surface modification of polyurethane with eptifibatide-loaded degradable nanoparticles reducing risk of blood coagulation

The main purpose of the work was to develop a drug releasing coatings on the surface of medical devices exposed to blood flow, what should enable effective inhibition of blood coagulation process. As a part of the work, the process of encapsulating the anticoagulant drug eptifibatide (EPT) in poly(DL-lactic-co-glycolic acid) (PLGA) nanoparticles was developed. EPT encapsulation efficiency was 29.1 ± 2.1%, while the EPT loading percentage in the nanoparticles was 4.2 ± 0.3%. The PLGA nanoparticles were suspended in a polyanion solution (hyaluronic acid (HA)) and deposited on the surface-treated thermoplastic polyurethane (TPU) by a layer-by-layer method. As a polycation poly-L-lysine (PLL) was used. The influence of released EPT on the activation of the coagulation system was analyzed using dynamic blood tester. Performed experiments show an effective delivery of the drug to the bloodstream and low risk of platelets (membrane receptor) activation. The dynamic blood test process, including its physical phenomenon, was described using numerical methods, i.e. a finite volume cone-and-plate test model as well as non-Newtonian blood models. The values of shear stress and blood flow velocity under the fast-rotating cone were computed applying boundary conditions of cylinder wall imitating blood-nanomaterial interaction. Implementing boundary conditions as initial shear stress values of bottom cylinder wall resulted in the increase of shear stress in blood under rotating cone. The developed system combining drug eluting polymeric nanoparticles with the polyelectrolyte "layer-by-layer" coating can be easily introduced to medical implants of various shape, with the advantages of resorbable drug carriers allowing for local and controllable delivery of anti-thrombogenic drugs.

Development and Application of a Modified Method to Determine the Encapsulation Efficiency of Proteins in Polymer Matrices

A modified method to determine protein encapsulation efficiency in polymer matrices has been developed and applied to two proteins and two polymers to demonstrate its wide range of applicability. This study was pursued due to the wide variation in reported protein encapsulation efficiency of polymer-based microcapsules, even when the protein, the polymer, and the microcapsule manufacturing method were consistent. Hemoglobin (Hb) and bovine serum albumin (BSA) were chosen as model proteins and ethylcellulose and poly(lactic-co-glycolic acid) (PLGA) as model polymers. The polymer of the microcapsule was dissolved in dichloromethane/ethanol or dichloromethane/ethyl acetate for ethylcellulose or PLGA microcapsules, respectively. Liberated proteins were simultaneously precipitated, pelleted by centrifugation, isolated by decanting the polymer solution, redissolved in 10% w/v sodium dodecyl sulfate in 0.8 N sodium hydroxide, and quantified using a modified Lowry assay. Blank microcapsules and exogenously added proteins demonstrated ≥ 93.8% recovery of proteins. The mean encapsulation efficiency of ethylcellulose or PLGA microcapsules was 52.4 or 76.9% for Hb and 86.4 or 74.7% for BSA, respectively. This demonstrates the effective use of centrifugation and the importance of an appropriate cosolvent system in the measure of encapsulation efficiency where one solvent dissolves the polymer while the other solvent quantitatively precipitates the liberated protein. It is evident that an alkaline solution of sodium dodecyl sulfate is efficient at quantitatively dissolving precipitated proteins. Remediation of problems observed with current methods and high reproducibility suggest that this modified method is generally applicable to the measure of protein encapsulation efficiency of polymer microcapsules.

Platelet lysate-loaded PLGA nanoparticles in a thermo-responsive hydrogel intended for the treatment of wounds

A thermo-responsive hydrogel of Pluronic F-127, containing PLGA nanoparticles loaded with a platelet lysate for wound treatment, was prepared. A high rate of incorporation of the lysate (about 80%) in the nanoparticles was achieved by the double emulsion-solvent evaporation method. The nanoparticles were characterized by measuring their size (about 318 nm), polydispersity index (0.29) and Z potential (-17.6), as well as by infrared and calorimetric techniques, and determining their stability as a function of time. It was found through measures of transepidermal water loss that the hydrogel containing the nanoparticles was capable of providing a semi-occlusive environment, necessary for the recovery of a wound. The inclusion of lysate in nanoparticles and this in turn in the hydrogel allowed a gradual release, which would avoid contact of the total dose with the biological medium. Studies with fibroblasts and in vivo in mice showed that the hydrogel containing nanoparticles with platelet lysate promoted faster tissue regeneration than the lysate in its free form, so this system is presented as a good alternative for the treatment of wounds.

ChABC-loaded PLGA nanoparticles: A comprehensive study on biocompatibility, functional recovery, and axonal regeneration in animal model of spinal cord injury

Spinal Cord Injury (SCI) is one of the leading causes of physical disability. In this study, spherical PLGA nanoparticles (NPs) containing ChABC enzyme were manufactured and fully characterized for SCI therapy. The NPs were used in the rat's contused spinal cord to assess the functional improvement and scar digestion. Twenty-three adult male Wistar rats (275 ± 25 g) were assigned into four groups of control, sham, blank-treated particle, and ChABC-treated particle. Throughout the survey, the BBB scores were obtained for all the groups. Finally, the injured sections of animals were dissected, and histological studies were conducted using Luxol fast blue and Bielschowsky. The biocompatibility and non-toxicity effects of the NPs on olfactory ensheathing cells (OECs) were confirmed by the MTT test. The flow-cytometry revealed the purity of cultured OECs with p75⁺/GFAP⁺ at around 87.9 ± 2.4%. Animals in the control and the blank-treated groups exhibited significantly lower BBB scores compared with the ChABC-treated particle group. Histological results confirmed the induced contusion models in the injured site. Myelin was observed in the treated groups, especially when the ChABC-loaded nanoparticles were utilized. The immunohistochemistry results indicated the scar glial degradation in animals treated by the ChABC-loaded particles. According to this study, the loaded particles can potentially serve as a suitable candidate for spinal cord repair, functional recovery and axonal regeneration.

PLGA nanoparticle preparations by emulsification and nanoprecipitation techniques: effects of formulation parameters

This study presents the influence of the primary formulation parameters on the formation of poly-dl-lactic-co-glycolic nanoparticles by the emulsification-solvent evaporation, and the nanoprecipitation techniques. In the emulsification-solvent evaporation technique, the polymer and tensoactive concentrations, the organic solvent fraction, and the sonication amplitude effects were analyzed. Similarly, in the nanoprecipitation technique the polymer and tensoactive concentrations, the organic solvent fraction and the injection speed were varied. Additionally, the agitation speed during solvent evaporation, the centrifugation speeds and the use of cryoprotectants in the freeze-drying process were analyzed. Nanoparticles were characterized by dynamic light scattering, laser Doppler electrophoresis, and scanning electron microscopy, and the results were evaluated by statistical analysis. Nanoparticle physicochemical characteristics can be adjusted by varying the formulation parameters to obtain specific sizes and stable nanoparticles. Also, by adjusting these parameters, the nanoparticle preparation processes have the potential to be tuned to yield nanoparticles with specific characteristics while maintaining reproducible results.

This study presents the influence of the primary formulation parameters on the formation of poly-dl-lactic-co-glycolic nanoparticles by the emulsification-solvent evaporation, and the nanoprecipitation techniques.

Encapsulation of the reductase component of p-hydroxyphenylacetate hydroxylase in poly(lactide-co-glycolide) nanoparticles by three different emulsification techniques

p-Hydroxyphenylacetate 3-hydroxylase component 1 (C1) is a useful enzyme for generating reduced flavin and NAD+ intermediates. In this study, poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) were used to encapsulate the C1 (PLGA-C1 NPs). Enzymatic activity, stability, and reusability of PLGA-C1 NPs prepared using three different methods [oil in water (o/w), water in oil in water (w/o/w), and solid in oil in water (s/o/w)] were compared. The s/o/w provided the optimal conditions for encapsulation of C1(PLGA-C1,s NPs), giving the highest enzyme activity, stability, and reusability. The s/o/w method improves enzyme activity ∼11 and 9-fold compared to w/o/w (PLGA-C1,w NPs) and o/w (PLGA-C1,o NPs). In addition, s/o/w prepared PLGA-C1,s NPs could be reused 14 times with nearly 50% activity remaining, a much higher reusability compared to PLGA-C1,o NPs and PLGA-C1,w NPs. These nanovesicles were successfully utilised to generate reduced flavin mononucleotide (FMN) and supply this cofactor to a hydroxylase enzyme that has application for synthesising anti-inflammatory compounds. Therefore, this recycling biocatalyst prepared using the s/o/w method is effective and has the potential for use in combination with other enzymes that require reduced FMN. Application of PLGA-C1,s NPs may be possible in additional biocatalytic processes for chemical or biochemical production.

PLGA Nanoparticles as Subconjunctival Injection for Management of Glaucoma

Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a subconjunctival injection that could represent a starting point for developing new therapeutic strategies against increase in ocular pressure. The brinzolamide-loaded PLGA nanoparticles were fabricated using emulsion-diffusion-evaporation method with varying concentrations of Tween 80 or poloxamer 188 (Plx) in aqueous and organic phases. The nanoparticles were characterized in terms of particle size and size distribution, entrapment efficiency and in-vitro drug release pattern as well as DSC and X-ray analysis. Nanoparticles prepared using Tween 80 in the aqueous phase showed higher encapsulation efficiency and smaller particle size-values compared to those prepared using Plx. Furthermore, the addition of Plx 188 or Brij 97 to the organic phase in the formulation containing Tween 80 in the aqueous phase led to an increase in the particle diameter-values of the obtained nanoparticles. The nanoparticles had the capacity to release the brinzolamide in a biphasic release profile. The nanoparticles were spherical in shape and the drug was entraped in the nanoparticles in an amorphous form. Selected nanoparticles, injected subconjunctivally in normotensive Albino rabbits, were able to reduce the IOP for up to 10 days. Nanoparticles loaded with brinzolamide with lower particle size were able to reduce the IOP for longer period compared to those with higher particle size. Histopathological studies for the anterior cross sections of the rabbits' eyes revealed that the tested nanoparticles were compatible with the ocular tissue. The overall results support that PLGA nanoparticles, applied as subconjunctival injection, can be considered as a promising carrier for ocular brinzolamide delivery with targeting delivery of the drug to the eye tissues.

Preparation and characterization of bee venom-loaded PLGA particles for sustained release

Bee venom-loaded poly(lactic-co-glycolic acid) (PLGA) particles were prepared by double emulsion-solvent evaporation, and characterized for a sustained-release system. Factors such as the type of organic solvent, the amount of bee venom and PLGA, the type of PLGA, the type of polyvinyl alcohol, and the emulsification method were considered. Physicochemical properties, including the encapsulation efficiency, drug loading, particle size, zeta-potential and surface morphology were examined by Fourier transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The size of the bee venom-loaded PLGA particles was 500 nm (measured using sonication). Zeta-potentials of the bee venom-loaded PLGA particles were negative owing to the PLGA. FT-IR results demonstrated that the bee venom was completely encapsulated in the PLGA particles, indicated by the disappearance of the amine and amide peaks. In addition, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis indicated that the bee venom in the bee venom-loaded PLGA particles was intact. In vitro release of the bee venom from the bee venom-loaded PLGA particles showed a sustained-release profile over 1 month. Bee venom-loaded PLGA particles can help improve patients' quality of life by reducing the number of injections required.

Tailoring sub-micron PLGA particle release profiles via centrifugal fractioning

Poly(D,L-lactic-co -glycolic) acid (PLGA)-based sub-micron particles are uniquely posed to overcome limitations of conventional drug delivery systems. However, tailoring cargo/payload release profiles from PLGA micro/nanoparticles typically requires optimization of the multi-parameter formulation, where small changes may cause drastic shifts in the resulting release profiles. In this study, we aimed to establish whether refining the average diameter of sub-micron particle populations after formulation alters protein release profiles. PLGA particles were first produced via double emulsion-solvent evaporation method to encapsulate bovine serum albumin. Particles were then subjected to centrifugal fractioning protocols varying in both spin time and force to determine encapsulation efficiency and release profile of differently sized populations that originated from a single batch. We found the average particle diameter was related to marked alterations in encapsulation efficiencies (range: 36.4-49.4%), burst release (range: 15.8-49.1%), and time for total cargo release (range: 38-78 days). Our data corroborate previous reports relating PLGA particle size with such release characteristics, however, this is the first study, to our knowledge, to directly compare particle population size while holding all formulation parameters constant. In summary, centrifugal fractioning to selectively control the population distribution of sub-micron PLGA particles represents a feasible tool to tailor release characteristics. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A 104A: 688-696, 2016.

A Fractional Factorial Design to Study the Effect of Process Variables on the Preparation of Hyaluronidase Loaded PLGA Nanoparticles

The present study was initiated to understand the effect of PLGA concentration, PVA concentration, internal-external phase ratio, homogenization speed, and homogenization time on mean particle size, zeta potential, and percentage drug encapsulation using fractional factorial design. Using PLGA (50-50) as the carrier, hyaluronidase loaded PLGA nanoparticles were prepared using double emulsion solvent evaporation technique. The particle size was analyzed by dynamic light scattering technique and protein content by Lowry method. The study showed that homogenization speed as an independent variable had maximum effect on particle size and zeta potential. Internal-external phase volume ratio had maximum effect on drug encapsulation. Mean particle size also had high dependency on the combined effect of PVA concentration and phase volume ratio. Using fractional factorial design particle size of <400 nm, zeta potential of <−30 mV, and percentage encapsulation of 15–18% were achieved.