Sorption of mercury on chemically synthesized polyaniline

Investigation of mercury(II) and copper(II) sorption in single and binary systems by alginate/polyethylenimine membranes

This study investigates Hg(II) and Cu(II) sorption in single and binary systems by alginate/polyethylenimine membranes. Batch experiments are conducted to assess the metal sorption performance. FTIR and SEM-EDX analyses are used to identify metal binding mechanism. The sorption kinetics are better fitted by the pseudo-second-order-equation compared to the pseudo-first-order-equation. Three isotherms are compared for fitting the sorption in mono-component solutions and the Sips model gives the best simulation of experimental data. The competitive-Sips model fits well sorption data in Hg-Cu binary solutions and finds that the Cu uptake is drastically reduced by Hg competition. Copper(II) uptake remains negligible at low pH whereas it increases with pH up to 6 because of material deprotonation. Mercury(II) sorption behaves differently, it slightly changes from pH 1 (q_eq: 0.76 mmol g^-1) to pH 6 (q_eq: 0.84 mmol g^-1) due to chloro-anion formation. Therefore, playing with the pH allows separating Hg(II) from Cu(II).

Removal of Hg(II) by poly(1-vinylimidazole)-grafted Fe3O4@SiO2 magnetic nanoparticles

Fe3O4@SiO2 magnetic nanoparticles modified by grafting poly(1-vinylimidazole) oligomer (FSPV) was fabricated as a novel adsorbent to remove Hg(II) from water. Fourier transform infra-red spectroscopy confirmed the successful grafting of oligomer, and thermogravimetric analysis showed FSPV had a high grafting yield with organic content of 22.8%. Transmission electron microscopy image displayed that FSPV particles were polymer-coated spheres with size of 10-20 nm. With saturation magnetization of 44.7 emu/g, FSPV particles could be easily separated from water with a simple magnetic process in 5 min. The Hg(II) adsorption capacity of FSPV was found to be 346 mg/g at pH 7 and 25 °C in 10 mM NaCl. Moreover, the removal of Hg(II) by FSPV was not obviously affected by solution pH (from 4 to 10) or humic acid (up to 8 mg/L as TOC). The presence of seven common ions including Na(+), K(+), Ca(2+), Mg(2+), Cl(-), NO3(-), and SO4(2-) (up to 100 mM ionic strength) slightly increased the adsorption of Hg(II) by FSPV. X-ray photoelectron spectroscopy analysis revealed that the N atom of the imidazole ring was responsible for the bonding with Hg(II), whereas the bonding of Hg with N did not result in cleavage of Hg-Cl bond in HgCl2 and HgClOH. The regeneration of Hg(II)-loaded FSPV could be achieved with 0.5 M HCl rapidly in 10 min, and the removal of Hg(II) maintained above 94% in five consecutive adsorption-desorption cycles. Therefore, FSPV could serve as a promising adsorbent for Hg(II) removal from water.

Mercury bioaccumulation and simultaneous nanoparticle synthesis by Enterobacter sp. cells

A mercury resistant strain of Enterobacter sp. is reported. The strain exhibited a novel property of mercury bioaccumulation with simultaneous synthesis of mercury nanoparticles. The culture conditions viz. pH 8.0 and lower concentration of mercury promotes synthesis of uniform sized 2-5 nm, spherical and monodispersed intracellular mercury nanoparticles. The remediated mercury trapped in the form of nanoparticles is unable to vaporize back into the environment thus, overcoming the major drawback of mercury remediation process. The mercury nanoparticles were recoverable. The nanoparticles have been characterized by high resolution transmission electron microscopy, energy dispersive X-ray analysis, powder X-ray diffraction and atomic force microscopy. The strain can be exploited for metal bioaccumulation from environmental effluent and developing a green process for nanoparticles biosynthesis.

Electrochemical hydride generation atomic fluorescence spectrometry for detection of tin in canned foods using polyaniline-modified lead cathode

An electrochemical hydride generation system with polyaniline-modified lead cathode was developed for tin determination by coupling with atomic fluorescence spectrometry. The tin fluorescence signal intensity was improved evidently as the polyaniline membrane could facilitate the transformation process from atomic tin to the SnH(4) and prevent the aggradation of Sn atom on Pb electrode surface. The effects of experimental parameters and interferences have been studied. The limit of detection (LOD) was 1.5 ng mL(-1) (3σ) and the relative standard deviation (RSD) was 3.3% for 11 consecutive measurements of 50 ng mL(-1) Sn(IV) standard solution.

High efficient removal of mercury from aqueous solution by polyaniline/humic acid nanocomposite

A composite sorbent PANI/HA was prepared by adding humic acid (HA) into chemical oxidation process of polyaniline (PANI). The sorbent was characterized by BET analysis, transmission electron microscopy, and FT-IR spectra. Batch adsorption results showed that the sorbent had high affinity to Hg(II) in aqueous solutions. The adsorption kinetics results of Hg(II) showed that the adsorption reached equilibrium within 200 min and adsorption rates could be described by pseudo-second-order kinetics. Sorption of Hg(II) to PANI/HA agreed well to the Langmuir adsorption model at different ionic strengths with the maximum adsorption capacity of 671 mg g(-1) (I=0.20 M). The experimental results showed solution pH values had a major impact on Hg(II) adsorption and with the help of HA the sorbent can effectively remove Hg(II) in a wide pH range (pH 4-7.5). An adsorption mechanism was proposed based on the XPS results.

Removal of aqueous Hg(II) by polyaniline: sorption characteristics and mechanisms

A polyaniline (PAN) prepared by chemical oxidation method was studied for Hg(II) removal from aqueous solutions. Batch adsorption results showed solution pH values had a major impact on mercury adsorption by this sorbent with optimal removal observed around pH 4-6. At both acidic and alkaline solutions beyond this optimal pH window, sorption capacity of PAN was substantially lowered, with the impact less pronounced at pH above 6. Among the water constituents tested, only chloride and humic acid had significant inhibition on mercury removal due to competitive complexation. In the range of 0.02-0.2 M, ionic strength had less impact on Hg(II) removal by PAN while further increase in background electrolyte concentration to 1.0 M substantially decreased mercury removal. An adsorption mechanism was proposed by analyzing the XPS spectra of the key elements (N(1s), Cl(2p) and Hg(4f)) on polyaniline surfaces and the change of its electrokinetic properties, both before and after Hg(II) adsorption. Specifically, at pH 5.5, it is likely that all the nitrogen-containing functional groups on the polymer matrix including imine, protonated imine and amine could be responsible for mercury adsorption, with imine having the highest affinity while the remaining two having similar strength to complex mercury.