Study on Interaction of Coomassie Brilliant Blue G-250 with Bovine Serum Albumin by Multispectroscopic

Co-production of fermentable sugars and highly active lignin from eucalyptus via a mild preprocessing with diethylene glycol and chromic chloride

Eucalyptus was pretreated with diethylene glycol catalyzed by 0.02 mol/L CrCl3 for 10 min, resulting in 91 % delignification and 98 % cellulose recovery, with trace fermentation inhibitors generated. After the mild pretreatment, the accessibility and affinity of cellulase to eucalyptus was enhanced, especially since enzyme adsorption rate increased by 1.6-fold. Therefore, glucose yield of pretreated eucalyptus was 7.9-fold higher than that of untreated eucalyptus after hydrolyzed 48 h, in which the maximum glucose concentration reached 62 g/L from eucalyptus by adding Tween 80. According to the characterization analysis, the structure of the eucalyptus lignin-carbohydrate complexes structure was destroyed during the pretreatment, while lignin fragments was likely reacted with diethylene glycol to form the stabilized aromatic ethers. Moreover, the extracted Deg-lignin exhibited better performances than commercial alkali lignin such as higher fluorescence intensity, less negative surface charge, and lower particle size. The mild pretreatment method with diethylene glycol and CrCl3 provided a promising approach for co-production of fermentable sugars and high activity lignin from lignocellulosic biomass.

Poly(sulfobetaine) versus poly(ethylene glycol) based copolymer modified polyurethane catheters for antifouling

Polyurethane (PU) catheters are commonly used in clinical treatment. However, the hydrophobic nature of the PU catheter surface leads to adhesion or adsorption to platelets, proteins, bacteria, and other molecules when used in human treatment. To achieve a surface with strong hydrophilicity, high stability and excellent biocompatibility, it is necessary to functionalize the PU catheters. In this paper, a coating with antifouling function was constructed on the surface of PU catheters using plasma technology and an amide coupling reaction. A series of characterization methods, including X-ray photoelectron spectroscopy (XPS), water contact angles (WCA), and atomic force microscopy (AFM), were used to prove the successful modification of the polymer coatings. The coatings showed good stability under conditions such as PBS (pH 7.4, 720 h), 75% ethanol (6 h) and 1 wt% SDS (10 min). Additionally, the coatings exhibit excellent hemocompatibility and antibacterial properties. The PU/PEI/PCSB coating has the best anti-fouling performance among them, which means that using the PCSB copolymer has the potential to modify different clinical catheters into highly effective antifouling coatings.

Turn-On Fluorescent Probe for BSA Detection Constructed by Supramolecular Assembly

The fluorescent probe method has attracted significant research attention due to its high sensitivity and reproducibility in detecting bovine serum albumin (BSA). In this study, we constructed a fluorescent probe for BSA detection by assembling an amphiphilic organic fluorescent molecule, termed 2-(2'-hydroxyphenyl) benzothiazole (HBT-11), with BSA. In an aqueous solution, HBT-11 exhibited a weak fluorescence emission at 501 nm. However, the addition of BSA substantially enhanced the fluorescence emission at 501 nm, indicating that the assembly was driven by electrostatic interactions between HBT-11 and BSA. HBT-11, serving as a fluorescent probe for BSA detection, demonstrated a limit of detection (LOD) as low as 3.92 nmol L-1, excellent photostability, high selectivity, and robust anti-interference capability. Notably, we successfully applied HBT-11 for detecting BSA in fetal bovine serum and selectively imaging BSA in HeLa cells.

Colorimetric immunosensing using liposome encapsulated MnO2 nanozymes for SARS-CoV-2 antigen detection

Development of specific signal reporters with signal amplification effect are highly needed for sensitive and accurate detection of pathogen. Herein, we design a colorimetric immunosensing nanosystem based on liposome encapsulated quantum dots-sized MnO2 nanozyme (MnO2QDs@Lip) as a signal reporter for ultrasensitive and fast detection of SARS-CoV-2 antigen. The pathogenic antigens captured and separated by antibody-conjugated magnetic beads (MBs) are further connected with antibody-modified MnO2QDs@Lip to form a sandwich-like immunocomplex structure. After triggered release, MnO2 QDs efficiently catalyze colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized TMB, which can be qualitatively observed by naked eyes and quantitatively analyzed by UV-Vis spectra or smartphone platforms. By taking advantages of immuno-magnetic separation, excellent peroxidase-like catalytic activity of MnO2 QDs, and high encapsulation efficiency of MnO2QDs@Lip, ultrasensitive detection of SARS-CoV-2 antigen ranging from 0.1 pg/mL to 100 ng/mL is achieved within 20 min. The limit of detection (LOD) is calculated to be 65 fg/mL in PBS buffer. Furthermore, real clinical samples of SARS-CoV-2 antigens can be effectively identified by this immunosensing nanosystem with excellent accuracy. This proposed detection nanosystem provides a strategy for simple, rapid and ultrasensitive detection of pathogens and may shed light on the development of new POCT detection platforms for early diagnosis of pathogens and surveillance in public health.

Delineating the cascade of molecular events in protein aggregation triggered by Glyphosate, aminomethylphosphonic acid, and Roundup in serum albumins

The molecular basis of protein unfolding on exposure to the widely used herbicide, Glyphosate (GLY), its metabolite aminomethylphosphonic acid (AMPA), and the commercial formulation Roundup have been probed using human and bovine serum albumins (HSA and BSA). Protein solutions were exposed to chemical stress at set experimental conditions. The study proceeds with spectroscopic and imaging tools. Steady-state and time-resolved fluorescence (TRF) measurements indicated polarity changes with the possibility of forming a ground-state complex. Atomic force microscopy imaging results revealed the formation of fibrils from BSA and dimer, trimer, and tetramer forms of oligomers from HSA under the chemical stress of GLY. In the presence of AMPA, serum albumins (SAs) form a compact network of oligomers. The compact network of oligomers was transformed into fibrils for HSA with increasing concentrations of AMPA. In contrast, Roundup triggered the formation of amorphous aggregates from SAs. Analysis of the Raman amide I band of all aggregates showed a significant increase in antiparallel β-sheet fractions at the expense of α-helix. The highest percentage, 24.6%, of antiparallel β-sheet fractions was present in amorphous aggregate formed from HSA under the influence of Roundup. These results demonstrated protein unfolding, which led to the formation of oligomers and fibrils.

Preparation of Alcohol Dehydrogenase-Zinc Phosphate Hybrid Nanoflowers through Biomimetic Mineralization and Its Application in the Inhibitor Screening

A biomimetic mineralization method was used in the facile and rapid preparation of nanoflowers for immobilizing alcohol dehydrogenase (ADH). The method mainly uses ADH as an organic component and zinc phosphate as an inorganic component to prepare flower-like ADH/Zn₃(PO₄)₂ organic-inorganic hybrid nanoflowers (HNFs) with the high specific surface area through a self-assembly process. The synthesis conditions of the ADH HNFs were optimized and its morphology was characterized. Under the optimum enzymatic reaction conditions, the Michaelis-Menten constant (K_m) of ADH HNFs (β-NAD⁺ as substrate) was measured to be 3.54 mM, and the half-maximal inhibitory concentration (IC₅₀) of the positive control ranitidine (0.2-0.8 mM) was determined to be 0.49 mM. Subsequently, the inhibitory activity of natural medicine Penthorum chinense Pursh and nine small-molecule compounds on ADH was evaluated using ADH HNFs. The inhibition percentage of the aqueous extract of P. chinense is 57.9%. The vanillic acid, protocatechuic acid, gallic acid, and naringenin have obvious inhibitory effects on ADH, and their percentages of inhibition are 55.1%, 68.3%, 61.9%, and 75.5%, respectively. Moreover, molecular docking analysis was applied to explore the binding modes and sites of the four most active small-molecule compounds to ADH. The results of this study can broaden the application of immobilized enzymes through biomimetic mineralization, and provide a reference for the discovery of ADH inhibitors from natural products.

Properties of selenium nanoparticles stabilized by Lycium barbarum polysaccharide-protein conjugates obtained with subcritical water

Selenium nanoparticles (SeNPs) in an aqueous solution have poor stability and tend to aggregate when stored for a long time. In the present study, SeNPs were stabilized by using Lycium barbarum polysaccharide (LBP) and Lycium barbarum protein (LBPr) conjugates (LBPP) as a stabilizer and dispersing agent. Particularly, the LBPP₁ was obtained with subcritical water treatment. In addition, the physical stability, re-dispersity and antitumor activity of LBPP₁-SeNPs were investigated. The results showed the particle size of LBPP₁-SeNPs was maintained at 111.5-117 nm, which was stable at PH 6, 4 °C and darkness for at least 40 days. Besides, the result of TEM showed that the dispersion of LBPP₁-SeNPs had more clear layers and smoother surfaces. Moreover, LBPP₁-SeNPs had excellent re-dispersibility and exhibited a significant inhibitory effect on HepG-2 cells and Caco-2 cells, respectively (p < 0.05). Therefore, LBPP₁-SeNPs can be used as potential selenium nutritional supplements for food and medical applications.

Self-cleaning expanded polytetrafluoroethylene-based hybrid membrane for water filtration

Membrane surface fouling is a key problem for water filtration. Compositing photocatalytic substances with a base membrane is a widely used strategy, but most of the membrane will be decomposed by photocatalysis. Herein, expanded polytetrafluoroethylene (ePTFE) with extremely stable chemical properties is grafted with polyacrylic acid (PAA) and then modified with titanium dioxide (TiO2) to realize a self-cleaning TiO2-PAA-ePTFE filtration membrane. It can recover its flux under UV irradiation after fouling. With 20 rounds of self-cleaning, the membrane microstructure still remains intact. Moreover, in addition to retaining bovine serum albumin, TiO2 particles on the membrane surface are capable of absorbing small organic pollutants and degrading them. Thus, this membrane is potentially used as an anti-fouling membrane for water filtration.