Secretory expression and characterization of a soluble laccase from the Ganoderma lucidum strain 7071-9 in Pichia pastoris

Statistical Improvement of rGILCC 1 and rPOXA 1B Laccases Activity Assay Conditions Supported by Molecular Dynamics

Laccases (E.C. 1.10.3.2) are glycoproteins widely distributed in nature. Their structural conformation includes three copper sites in their catalytic center, which are responsible for facilitating substrate oxidation, leading to the generation of H2O instead of H2O2. The measurement of laccase activity (UL-1) results may vary depending on the type of laccase, buffer, redox mediators, and substrates employed. The aim was to select the best conditions for rGILCC 1 and rPOXA 1B laccases activity assay. After sequential statistical assays, the molecular dynamics proved to support this process, and we aimed to accumulate valuable insights into the potential application of these enzymes for the degradation of novel substrates with negative environmental implications. Citrate buffer treatment T2 (CB T2) (pH 3.0 ± 0.2; λ420nm, 2 mM ABTS) had the most favorable results, with 7.315 ± 0.131 UL-1 for rGILCC 1 and 5291.665 ± 45.83 UL-1 for rPOXA 1B. The use of citrate buffer increased the enzyme affinity for ABTS since lower Km values occurred for both enzymes (1.49 × 10-2 mM for rGILCC 1 and 3.72 × 10-2 mM for rPOXA 1B) compared to those obtained in acetate buffer (5.36 × 10-2 mM for rGILCC 1 and 1.72 mM for rPOXA 1B). The molecular dynamics of GILCC 1-ABTS and POXA 1B-ABTS showed stable behavior, with root mean square deviation (RMSD) values not exceeding 2.0 Å. Enzyme activities (rGILCC 1 and rPOXA 1B) and 3D model-ABTS interactions (GILCC 1-ABTS and POXA 1B-ABTS) were under the strong influence of pH, wavelength, ions, and ABTS concentration, supported by computational studies identifying the stabilizing residues and interactions. Integration of the experimental and computational approaches yielded a comprehensive understanding of enzyme-substrate interactions, offering potential applications in environmental substrate treatments.

Production of a novel laccase from Ceratorhiza hydrophila and assessing its potential in natural dye fixation and cytotoxicity against tumor cells

BACKGROUND

Flavonoid natural dyes have gained attention because they are nontoxic and eco-friendly. However, they do not work effectively with artificial fibers and require the use of mordants, which are considered as hazardous chemicals. Laccase enzyme catalyzes the oxidation of phenols, forming phenoxyl radicals that undergo a further polymerization process. So, laccase can oxidize flavonoid dyes, and it can be used instead of harmful mordants in flavonoid dye fixation on cotton fabrics. Laccases also are involved in a variety of metabolic processes, and they have anti-proliferative effects toward HepG2 and MCF-7 tumor cells.

RESULTS

Among fifteen fungal isolates, the fungus Ceratorhiza hydrophila isolated from the submerged plant Myriophyllum spicatum was selected as the most potent laccase producer. Optimization of the production medium resulted in a 9.9-fold increase in laccase productivity. The partially purified Ceratorhiza hydrophila laccase could successfully improve the affinity of cotton fabrics toward quercetin (flavonoid) dye with excellent color fastness properties. The partially purified laccase also showed anti-proliferative activity against HepG2 and MCF-7 tumor cells. However, high laccase concentration is required to estimate IC50.

CONCLUSIONS

Ceratorhiza hydrophila MK387081 is an excellent laccase producer. The partially purified laccase from Ceratorhiza hydrophila can be used in textile dyeing and printing processes as a safer alternative to the conventional hazardous mordants. Also, it can be used in preparation of cancer treatment drugs. However, further studies are needed to investigate IC50 for both cell types at higher laccase concentrations.

Synthetic dyes degradation using lignolytic enzymes produced from Halopiger aswanensis strain ABC_IITR by Solid State Fermentation

The present work focuses on studying the degradation of industrial synthetic dyes, which poses serious health hazards and a drastic impact on the environment. Currently available enzymatic processes have higher production and operational costs. However, most enzymes are active at acidic pH, which limits its application in textile dye degradation. This problem can be overcome by lignolytic enzymes obtained from halo-alkaliphile through Solid State Fermentation (SSF) using wheat bran (agro-byproduct) as a substrate. The major lignolytic enzymes studied were Lignin Peroxidase (LiP), Manganese Peroxidase (MnP), and laccase. The results demonstrated the highest activity of 215.4 ± 1.57 of LiP, 36.8 ± 2.38 of MnP, and 8.34 ± 0.21 IU/gds of laccase. Crude enzymes were used to treat synthetic dyes (mainly azo dyes), and their potential for its degradation was confirmed by spectrophotometric, GC-MS, and HPLC analysis. The highest decolorization of 82-93% of Malachite Green (MG) was achieved in LiP and MnP mediated reaction system within 2 hours. The laccase reaction system showed degradation of 53.87% of methyl orange without adding any redox mediator. After obtaining these results, the crude LiP and MnP in the reaction system were further subjected to decolorization at a higher MG concentration of 100-600 mg/L without a redox mediator. As a result, both LiP and MnP decolorized MG by 72-89%. Further, GC-MS analysis of MG biodegradation products confirmed the formation of less toxic low molecular weight products such as benzaldehyde and methanone.

Degradation and detoxification of azo dyes with recombinant ligninolytic enzymes from Aspergillus sp. with secretory overexpression in Pichia pastoris

Ligninolytic enzymes, including laccase (Lac), manganese peroxidase (MnP) and lignin peroxidase (LiP), have attracted much attention in the degradation of contaminants. Genes of Lac (1827 bp), MnP (1134 bp) and LiP (1119 bp) were cloned from Aspergillus sp. TS-A, and the recombinant Lac (69 kDa), MnP (45 kDa) and LiP (35 kDa) were secretory expressed in Pichia pastoris GS115, with enzyme activities of 34, 135.12 and 103.13 U l-1, respectively. Dyes of different structures were treated via the recombinant ligninolytic enzymes under the optimal degradation conditions, and the result showed that the decolourization rate of Lac on Congo red (CR) in 5 s was 45.5%. Fourier-transform infrared spectroscopy, gas chromatography-mass spectrometry analysis and toxicity tests further proved that the ligninolytic enzymes could destroy the dyes, both those with one or more azo bonds, and the degradation products were non-toxic. Moreover, the combined ligninolytic enzymes could degrade CR more completely compared with the individual enzyme. Remarkably, besides azo dyes, ligninolytic enzymes could also degrade triphenylmethane and anthracene dyes. This suggests that ligninolytic enzymes from Aspergillus sp. TS-A have the potential for application in the treatment of contaminants.

The roles of Pleurotus ostreatus HAUCC 162 laccase isoenzymes in decolorization of synthetic dyes and the transformation pathways

Fungal laccases have shown great potential in industrial and environmental applications. They are generally produced as laccase isoenzymes. Thus, to further study the properties of different laccase isoenzymes and their performance in bio-remediation is essential for a deep understanding of laccase function and application. In this study, three Pleurotus ostreatus HAUCC 162 laccase isoenzymes were heterologously expressed, and the effects of different inhibitors, metal ions, and organic solvents on the activity of recombinant laccases were evaluated. In the dye decolorization test, LACC6 showed the highest ability to remove Malachite green (MG), Remazol Brilliant Blue R (RBBR), Bromophenol blue (BB), and Methyl orange (MO) among the three recombinant laccases. Removal rates within 24 h were 91.5%, 84.9%, 79.1%, and 73.1% for MG (100 mg/L), RBBR (100 mg/L), BB (100 mg/L), and MO (100 mg/L), respectively. The MG and RBBR transformation pathways were proposed by using High Performance Liquid Chromatography-Mass Spectrometry (LC-MS) analysis. Based on the results of this work, the production of recombinant LACC6 or improving the portion of LACC6 in the crude extracellular laccase may advance synthetic dye removal.

From agro-waste to tool: biotechnological characterization and application of Ganoderma lucidum E47 laccase in dye decolorization

The culture of fungal species from agro-waste allows for the sustainable preparation of valuable biotechnological products and contributes to establish the Circular Economy concept. The Ganoderma lucidum species is well known as producer of laccases (EC 1.10.3.2), which serves as a tool to oxidize chemicals. When producing G. lucidum E47 basidiomes with edible purposes out of rice crop residues, its laccase remains as by-product. In this work, we report the biotechnological characterization and application of the laccase recovered from spent cultures of the G. lucidum E47 strain. We detected at least one polypeptide (ca. 59 kDa) which displays attractive activity and stability values when used in the range of 18-45 °C in mildly acidic environment (pH 4.8-5.8). These parameters can be enhanced in the presence of organic cosolvents such as butyl acetate and methyl iso-butyl ketone, but the opposite effect is observed with solvents of lower log P. The best activity-stability performance is reached when the biocatalyst is used in pH 4.8 buffer with 5% (v/v) butyl acetate at 37 °C. The laccase was capable of decolorizing xanthene, azo and triarylmethane dyes, exhibiting excellent selectivity on bromocresol green and bromocresol purple. Furthermore, the biocatalyst displayed an attractive activity when assessed for the decolorization of bromocresol green in a proof-of-concept effluent biotreatment.

Delignification of corncob via combined hydrodynamic cavitation and enzymatic pretreatment: process optimization by response surface methodology

BACKGROUND

Renewable liquid biofuel production will reduce crude oil import of India. To displace the huge quantity of fossil fuels used for energy production, this research was focused on utilization of unexploited low-cost agricultural residues for biofuel production. Corncobs are a byproduct of corn processing industry, and till now it is not utilized for biofuel production, eventhough it has high lignocellulosic concent. In this study, combined hydrodynamic cavitation and enzymatic (HCE) method was evaluated as a pretreatment method of corncob for biofuel production. The most significant process parameters namely (i) enzyme loading (3-10 U g^-1), (ii) biomass loading (2.5-5.0%), and (iii) duration (5-60 min) were optimized and their effects on combined HCE pretreatment of corncob was studied through response surface methodology for lignin reduction, hemicellulose reduction and cellulose increase.

RESULTS

The highest lignin reduction (47.4%) was obtained in orifice plate 1 (OP₁) under the optimized conditions namely biomass loading at 5%, enzyme loading at 6.5 U g^-1 of biomass, and reaction duration of 60 min. The above tested independent variables had a significant effect on lignin reduction. The cavitational yield and energy consumption under the above-mentioned optimized conditions for OP₁ was 3.56 × 10^-5 g J^-1 and 1.35 MJ kg^-1, respectively.

CONCLUSIONS

It is evident from the study that HCE is an effective technology and requires less energy (1.35 MJ kg^-1) than other biomass pretreatment methods.

Importance of a Laccase Gene (Lcc1) in the Development of Ganoderma tsugae

In this study, a novel laccase gene (Lcc1) from Ganoderma tsugae was isolated and its functions were characterized in detail. The results showed that Lcc1 has the highest expression activity during mycelium development and fruit body maturation based on the analysis of Lcc1 RNA transcripts at different developmental stages of G. tsugae. To investigate the exact contribution of Lcc1 to mycelium and fruit body development in G. tsugae, Lcc1 transgenic strains were constructed by targeted gene replacement and over-expression approaches. The results showed that the lignin degradation rate in Lcc1 deletion mutant was much lower than the degradation efficiency of the wild-type (WT), over-expression and rescue strains. The lignin degradation activity of G. tsugae is dependent on Lcc1 and the deletion of Lcc1 exerted detrimental influences on the development of mycelium branch. Furthermore, the study uncovered that Lcc1 deletion mutants generated much shorter pale grey fruit bodies, suggesting that Lcc1 contributes directly to pigmentation and stipe elongation during fruit body development in G. tsugae. The information obtained in this study provides a novel and mechanistic insight into the specific role of Lcc1 during growth and development of G. tsugae.

Variants of PpuLcc, a multi-dye decolorizing laccase from Pleurotus pulmonarius expressed in Pichia pastoris

A laccase of the basidiomycete Pleurotus pulmonarius (PpuLcc) possessed strong decolorizing abilities towards artificial and natural dyes. The PpuLcc was purified from the culture supernatant via FPLC, and the corresponding gene cloned and expressed in Pichia pastoris GS115. To examine the impact of the C-terminal tail region and the signal peptide on the recombinant expression of PpuLcc, a non-modified version or different truncations (-2, -5, -13 AA) of the target protein were combined with different secretion signals. Heterologous expression of codon optimized constructs resulted in extracellular activities of the PpuLcc variants of up to 7000 U L^-1 (substrate ABTS) which was six times higher than non-codon optimized constructs. In contrast to previous works, altering the C-terminal end of the protein did not influence kinetic parameters or the rate of expression. The His-Tag purified enzymes showed high temperature optima (50-70 °C) and thermo stability. All of the recombinant variants degraded triarylmethane and azo dyes. Rapid bleaching of β-carotene (E 160a) and the polyene acid norbixin (E 160b) using a laccase was found for the first time. Thus, the enzyme may be useful in decolorizing unwanted polyene pigments, for example from the processing of cheese, bakery, desserts, ice cream or coloured casings.

Pilot-scale bioconversion of rice and sunflower agro-residues into medicinal mushrooms and laccase enzymes through solid-state fermentation with Ganoderma lucidum

Solid-state fermentation was evaluated at the pilot-scale for the bioconversion and valorization of rice husks and straw (RSH), or sunflower seed hulls (SSH), into medicinal mushrooms and crude extracts, with laccase activity. The average mushroom yield was 56kg dry weight per ton of agro-residues. Laccase activity in crude aqueous extracts showed its maximum value of 10,927Ukg^-1 in RSH (day 10, Exudate phase) and 16,442Ukg^-1 in SSH (day 5, Full colonization phase), the activity at the Residual substrate phase being 511Ukg^-1 in RSH and 803Ukg^-1 in SSH, respectively. Crude extracts obtained with various protocols revealed differences in the extraction yields. Lyophilization followed by storage at 4°C allowed the preservation of laccase activity for more than one month. It is proposed that standard mushroom farms could increase their profits by obtaining laccase as a byproduct during the gaps in mycelium running.

Plackett-Burman Design for rGILCC1 Laccase Activity Enhancement in Pichia pastoris: Concentrated Enzyme Kinetic Characterization

Laccases are multicopper oxidases that catalyze aromatic and nonaromatic compounds with concomitant reduction of molecular oxygen to water. They are of great interest due to their potential biotechnological applications. In this work we statistically improved culture media for recombinant GILCC1 (rGILCC1) laccase production at low scale from Ganoderma lucidum containing the construct pGAPZαA-GlucPost-Stop in Pichia pastoris. Temperature, pH stability, and kinetic parameter characterizations were determined by monitoring concentrate enzyme oxidation at different ABTS substrate concentrations. Plackett-Burman Design allowed improving enzyme activity from previous work 36.08-fold, with a laccase activity of 4.69 ± 0.39 UL⁻¹ at 168 h of culture in a 500 mL shake-flask. Concentrated rGILCC1 remained stable between 10 and 50°C and retained a residual enzymatic activity greater than 70% at 60°C and 50% at 70°C. In regard to pH stability, concentrated enzyme was more stable at pH 4.0 ± 0.2 with a residual activity greater than 90%. The lowest residual activity greater than 55% was obtained at pH 10.0 ± 0.2. Furthermore, calculated apparent enzyme kinetic parameters were a V_max of 6.87 × 10⁻⁵ mM s⁻¹, with an apparent K_m of 5.36 × 10⁻² mM. Collectively, these important stability findings open possibilities for applications involving a wide pH and temperature ranges.

Yeast Hosts for the Production of Recombinant Laccases: A Review

Laccases are multi-copper oxidoreductases which catalyze the oxidation of a wide range of substrates during the simultaneous reduction of oxygen to water. These enzymes, originally found in fungi, plants, and other natural sources, have many industrial and biotechnological applications. They are used in the food, textile, pulp, and paper industries, as well as for bioremediation purposes. Although natural hosts can provide relatively high levels of active laccases after production optimization, heterologous expression can bring, moreover, engineered enzymes with desired properties, such as different substrate specificity or improved stability. Hence, diverse hosts suitable for laccase production are reviewed here, while the greatest emphasis is placed on yeasts which are commonly used for industrial production of various proteins. Different approaches to optimize the laccase expression and activity are also discussed in detail here.

Lignocellulose degrading extremozymes produced by Pichia pastoris: current status and future prospects

In this review article, extremophilic lignocellulosic enzymes with special interest on xylanases, β-mannanases, laccases and finally cellulases, namely, endoglucanases, exoglucanases and β-glucosidases produced by Pichia pastoris are reviewed for the first time. Recombinant lignocellulosic extremozymes are discussed from the perspectives of their potential application areas; characteristics of recombinant and native enzymes; the effects of P. pastoris expression system on recombinant extremozymes; and their expression levels and applied strategies to increase the enzyme expression yield. Further, effects of enzyme domains on activity and stability, protein engineering via molecular dynamics simulation and computational prediction, and site-directed mutagenesis and amino acid modifications done are also focused. Superior enzyme characteristics and improved stability due to the proper post-translational modifications and better protein folding performed by P. pastoris make this host favourable for extremozyme production. Especially, glycosylation contributes to the structure, function and stability of enzymes, as generally glycosylated enzymes produced by P. pastoris exhibit better thermostability than non-glycosylated enzymes. However, there has been limited study on enzyme engineering to improve catalytic efficiency and stability of lignocellulosic enzymes. Thus, in the future, studies should focus on protein engineering to improve stability and catalytic efficiency via computational modelling, mutations, domain replacements and fusion enzyme technology. Also metagenomic data need to be used more extensively to produce novel enzymes with extreme characteristics and stability.

Isolation, Purification and Characterization of Two Laccases from Carrot (Daucus carota L.) and Their Response to Abiotic and Metal Ions Stresses

Laccases, which belong to the blue copper oxidase enzyme family, oxidize many organic and inorganic compounds. The laccase-encoding genes DcLac1 and DcLac2 were isolated from the economically important tuberous root carrot, and their proteins were successfully expressed and purified using the Escherichia coli expression system BL21(DE3). DcLac1 and DcLac2 had molecular masses of approximately 64 and 61.9 kDa, respectively. With 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulfonate acid) as the substrate, DcLac1 and DcLac2 had K m values of 3.9043 and 1.255 mM, respectively, and V max values of 54.0832 and 81.7996 μM mg(-1) min(-1), respectively. Moreover, DcLac1 and DcLac2 had optimal pH values of 2.8 and 2.6, respectively, and optimal temperatures of 45 and 40 °C, respectively. The activities of the two enzymes were promoted by Ca(2+), Mg(2+), Cu(2+), and Na(+) but inhibited by Fe(2+), Zn(2+), Mn(2+), K(+), SDS, and EDTA. Expression profiles showed that the two DcLac genes had almost identical responses to high and low temperature stresses but different responses to salt, drought, and metal stresses. This study provided insights into the characteristics and tolerance response mechanisms of laccase in carrot.

High Level Secretion of Laccase (LccH) from a Newly Isolated White-Rot Basidiomycete, Hexagonia hirta MSF2

Newer and novel laccases attract considerable attention due to its promising and valuable multiple applications in biotech industry. This present investigation documents, for the first time, on high level extracellular secretion of laccase (LccH) in newly isolated wood-degrading basidiomycete Hexagonia hirta MSF2. LccH was optimally active at 40°C in citrate phosphate buffer with a pH of 3.4. Optimized Cu(2+) in glucose yeast extract (GY) medium enhanced the LccH production by H. hirta to 1944.44 U.ml(-1). A further increment in LccH activity of 5671.30 U.ml(-1) was achieved by the addition of a phenolic inducer, 2,5 Xylidine. Zymogram and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis of LccH revealed that LccH is a monomer with a molecular mass of 66 kDa. MALDI-TOF-MS based peptide mass fingerprinting and comparative modeling of the amino acid sequence of LccH showed that it was closer to Trametes sp. AH28-2 (PDB: 3KW7) with 48% identity, 95% coverage, 0.011 alignment score and RMSD of 0.497Å. Crude LccH delignified lignocellulosic biomass such as wood and corncob, to a level of 28.6 and 16.5%, respectively. Such high level secretion, thermal and solvent stability of LccH make H. hirta a potential candidate not only for LccH production and biodelignification but also generation of lignin derived aromatic feed stock chemicals for industrial and environmental applications.

The trade-off of availability and growth inhibition through copper for the production of copper-dependent enzymes by Pichia pastoris

Background

Copper is an essential chemical element for life as it is a part of prosthetic groups of enzymes including super oxide dismutase and cytochrome c oxidase; however, it is also toxic at high concentrations. Here, we present the trade-off of copper availability and growth inhibition of a common host used for copper-dependent protein production, Pichia pastoris.

Results

At copper concentrations ranging from 0.1 mM (6.35 mg/L) to 2 mM (127 mg/L), growth rates of 0.25 h⁻¹ to 0.16 h⁻¹ were observed with copper uptake of as high as 20 mg_copper/g_CDW. The intracellular copper content was estimated by subtracting the copper adsorbed on the cell wall from the total copper concentration in the biomass. Higher copper concentrations led to stronger cell growth retardation and, at 10 mM (635 mg/L) and above, to growth inhibition. To test the determined copper concentration range for optimal recombinant protein production, a laccase gene from Aspergillus clavatus [EMBL: EAW07265.1] was cloned under the control of the constitutive glyceraldehyde-3-phosphate (GAP) dehydrogenase promoter for expression in P. pastoris. Notably, in the presence of copper, laccase expression improved the specific growth rate of P. pastoris. Although copper concentrations of 0.1 mM and 0.2 mM augmented laccase expression 4 times up to 3 U/mL compared to the control (0.75 U/mL), while higher copper concentrations resulted in reduced laccase production. An intracellular copper content between 1 and 2 mg_copper/g_CDW was sufficient for increased laccase activity. The physiology of the yeast could be excluded as a reason for the stop of laccase production at moderate copper concentrations as no flux redistribution could be observed by ¹³C-metabolic flux analysis.

Conclusion

Copper and its pivotal role to sustain cellular functions is noteworthy. However, knowledge on its cellular accumulation, availability and distribution for recombinant protein production is limited. This study attempts to address one such challenge, which revealed the fact that intracellular copper accumulation influenced laccase production and should be considered for high protein expression of copper-dependent enzymes when using P. pastoris. The results are discussed in the context of P. pastoris as a general host for copper -dependent enzyme production.

Electronic supplementary material

The online version of this article (doi:10.1186/s12896-016-0251-3) contains supplementary material, which is available to authorized users.

Computational analysis and low-scale constitutive expression of laccases synthetic genes GlLCC1 from Ganoderma lucidum and POXA 1B from Pleurotus ostreatus in Pichia pastoris

Lacasses are multicopper oxidases that can catalyze aromatic and non-aromatic compounds concomitantly with reduction of molecular oxygen to water. Fungal laccases have generated a growing interest due to their biotechnological potential applications, such as lignocellulosic material delignification, biopulping and biobleaching, wastewater treatment, and transformation of toxic organic pollutants. In this work we selected fungal genes encoding for laccase enzymes GlLCC1 in Ganoderma lucidum and POXA 1B in Pleurotus ostreatus. These genes were optimized for codon use, GC content, and regions generating secondary structures. Laccase proposed computational models, and their interaction with ABTS [2, 2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid)] substrate was evaluated by molecular docking. Synthetic genes were cloned under the control of Pichia pastoris glyceraldehyde-3-phosphate dehydrogenase (GAP) constitutive promoter. P. pastoris X-33 was transformed with pGAPZαA-LaccGluc-Stop and pGAPZαA-LaccPost-Stop constructs. Optimization reduced GC content by 47 and 49% for LaccGluc-Stop and LaccPost-Stop genes, respectively. A codon adaptation index of 0.84 was obtained for both genes. 3D structure analysis using SuperPose revealed LaccGluc-Stop is similar to the laccase crystallographic structure 1GYC of Trametes versicolor. Interaction analysis of the 3D models validated through ABTS, demonstrated higher substrate affinity for LaccPost-Stop, in agreement with our experimental results with enzymatic activities of 451.08 ± 6.46 UL^-1 compared to activities of 0.13 ± 0.028 UL^-1 for LaccGluc-Stop. This study demonstrated that G. lucidum GlLCC1 and P. ostreatus POXA 1B gene optimization resulted in constitutive gene expression under GAP promoter and α-factor leader in P. pastoris. These are important findings in light of recombinant enzyme expression system utility for environmentally friendly designed expression systems, because of the wide range of substrates that laccases can transform. This contributes to a great gamut of products in diverse settings: industry, clinical and chemical use, and environmental applications.

Overproduction of laccase from a newly isolated Ganoderma lucidum using the municipal food waste as main carbon and nitrogen supplement

A strain of Ganoderma lucidum was separated and identified according to its morphological characteristics and phylogenetic data. The fungus is a laccase producer and it can secrete laccase using the municipal food waste (FW) as carbon and nitrogen supplement. After the statistic optimization, a laccase activity of 42,000 ± 600 U/l was obtained at 500 ml flask level and the activity is 12,000 U/l higher than that obtained by fermenting glucose and peptone, indicating that the use of FW to produce laccase not only reduces production cost, but also improves laccase activity. In 15 l bioreactor, FW is also suitable for laccase production and the maximum laccase activity reached 54,000 U/l. Moreover, some details of laccase overproduction using FW were investigated. The G. lucidum consumes FW by secreting a series of hydrolases and proteases and the improvement of laccase activity is because FW induces over-expression of three isoenzymes by polyacrylamide gel electrophoresis analysis.

Fungal laccases and their applications in bioremediation

Laccases are blue multicopper oxidases, which catalyze the monoelectronic oxidation of a broad spectrum of substrates, for example, ortho- and para-diphenols, polyphenols, aminophenols, and aromatic or aliphatic amines, coupled with a full, four-electron reduction of O₂ to H₂O. Hence, they are capable of degrading lignin and are present abundantly in many white-rot fungi. Laccases decolorize and detoxify the industrial effluents and help in wastewater treatment. They act on both phenolic and nonphenolic lignin-related compounds as well as highly recalcitrant environmental pollutants, and they can be effectively used in paper and pulp industries, textile industries, xenobiotic degradation, and bioremediation and act as biosensors. Recently, laccase has been applied to nanobiotechnology, which is an increasing research field, and catalyzes electron transfer reactions without additional cofactors. Several techniques have been developed for the immobilization of biomolecule such as micropatterning, self-assembled monolayer, and layer-by-layer techniques, which immobilize laccase and preserve their enzymatic activity. In this review, we describe the fungal source of laccases and their application in environment protection.

Molecular cloning of a laccase gene from Ganoderma lucidum and heterologous expression in Pichia pastoris

A genomic laccase gene and cDNA were cloned from the white-rot fungi Ganoderma lucidum TR6. The genomic laccase gene contained 2086 bp with nine introns. The laccase cDNA had an open reading frame of 1563 bp. The deduced mature protein consisted of 520 amino acids. Both the genomic laccase gene and cDNA were expressed in the Pichia pastoris GS115. Laccase activities could be detected in transformants with laccase cDNA but not in transformants with genomic laccase gene. The highest activity value reached 685.8 U L(-1). The effects of temperature, pH and nitrogen source on laccase expression in P. pastoris were analyzed. The recombinant laccase was purified and the molecular mass was 73.4 KDa, a little bigger than native laccase. The optimal pH and temperature were specific at pH 3.5 and special range from 60 to 90 °C. The laccase was stable at pH 7.0 and temperature range of 20-30 °C. The Km and Vm values of this recombinant laccase for ABTS were 0.521 mM and 19.65 mM min(-1), respectively.

Heterologous expression and characterization of a novel laccase isoenzyme with dyes decolorization potential from Coprinus comatus

Two new laccase genes, named lac1 and lac2, were cloned from the edible basidiomycete Coprinus comatus. Comparison of the deduced amino acid sequences revealed two laccases showed 66.12 % identity and clustered with lac2 and lac3 from Coprinopsis cinerea in same phylogenetic group. Lac1 and lac2 encode proteins of 517 and 523 amino acids preceded by 18 and 21-residue signal peptides, respectively. Lac1 was functionally expressed in Pichia pastoris. The optimum pHs of recombinant Lac1 were 3.0, 6.0, 5.5 and 6.0 and the optimum temperatures were 65, 55, 70 and 50 °C for ABTS, guaiacol, 2,6-dimethylphenol and syringaldazine, respectively. The Km values of Lac1 were 34, 4,317, 7,611 and 14 μM, and the corresponding kcat values were 465.79, 7.67, 1.15 and 0.60 (s(-1) mM), for ABTS, guaiacol, 2,6-dimethylphenol and syringaldazine, respectively. The enzyme activity was completely inhibited by sodium azide (NaN(3)) and 1,4-dithiothreitol (DTT) at the concentration of 5 mM. Laccase activity was also inhibited by several metal ions, especially Fe(2+), while K(+) and NH(4) (+) slightly enhanced laccase activity. Twelve synthetic dyes belonging to anthraquinone, azo and triphenylmethane dyes were decolorized by the recombinant Lac1 at different extents. The recombinant Lac1 decolorized azo dye Reactive Dark Blue KR up to 90 % without any mediator and increasing to 96 % with mediator, indicating its potential in the treatment of industrial effluent containing some recalcitrant synthetic dyes.