Lipid-Based Formulations and Drug Supersaturation: Harnessing the Unique Benefits of the Lipid Digestion/Absorption Pathway

Evaluation of the impact of mucin on supersaturation and permeation of BCS class 2 basic drugs

This study evaluated the impact of mucin on supersaturation and permeation of BCS Class 2 basic drugs in a pH-shift, 2-stage model using three model compounds, dipyridamole, ricobendazole, and Compound A. The three compounds showed various degrees of supersaturation (DoS) in Stage 2 and modest to no increases in flux with the presence of mucin in the dissolution media. Mucin's impact on DoS and flux, if any, appeared to be compound specific and possibly related to its pKa and ionization state. Overall, the increases in supersaturation and permeation due to mucin ranged from modest to minimal for the three model compounds under the conditions tested. The pH-shift model using MacroFLUX was able to monitor gastric and intestinal dissolution and simultaneously assess the effect of intestinal mucin on supersaturation and flux.

Thermally-Induced Supersaturation Approach for Optimizing Drug Loading and Biopharmaceutical Properties of Supersaturated Lipid-Based Formulations: Case Studies with Ibrutinib and Enzalutamide

Lipid-based formulations (LbFs) have demonstrated success in pharmaceutical applications; however, challenges persist in dissolving entire doses of the drug into defined liquid volumes. In this study, the temperature-induced supersaturation method was employed in LbF to address drug loading and pill burden issues. Supersaturated LbFs (super-LbF) were prepared using the temperature-induced supersaturation method, where the drug load is above its equilibrium solubility. Further, the influence of the drug's physicochemical and thermal characteristics on drug loading and their relevance with an apparent degree of supersaturation (aDS) was studied using two model drugs, ibrutinib and enzalutamide. All the prepared LbFs were evaluated in terms of physical stability, dispersion, and solubilization capacity, as well as pharmacokinetic assessments. Drug re-crystallization was observed in the lipid solution on long-term storage at higher aDS values of 2-2.5. Furthermore, high-throughput lipolysis studies demonstrated a significant decrease in drug concentration across all LbFs (regardless of drug loading) due to a decline in the formulation solvation capacity and subsequent generation of in-situ supersaturation. Further, the in vivo results demonstrated comparable pharmacokinetic parameters between conventional LbF and super-LbF. The short duration of the thermodynamic metastable state limits the potential absorption benefits. However, super-LbFs of Ibr and Enz showed superior profiles, with 1.7-fold and 5.2-fold increased drug exposure compared to their respective crystalline suspensions. In summary, this study emphasizes the potential of temperature-induced supersaturation in LbF for enhancing drug loading and highlights the intricate interplay between drug properties, formulation characteristics, and in vivo performance.

Lipid-based systems with precipitation inhibitors as formulation approach to improve the drug bioavailability and/or lower its dose: a review

Lipid-based systems, such as self-microemulsifying systems (SMEDDS) are attracting strong attention as a formulation approach to improve the bioavailability of poorly water-soluble drugs. By applying the "spring and parachute" strategy in designing supersaturable SMEDDS, it is possible to maintain the drug in the supersaturated state long enough to allow absorption of the complete dose, thus improving the drug's bio-availability. As such an approach allows the incorporation of larger amounts of the drug in equal or even lower volumes of SMEDDS, it also enables the production of smaller final dosage forms as well as decreased gastrointestinal irritation, being of particular importance when formulating dosage forms for children or the elderly. In this review, the technological approaches used to prolong the drug supersaturation are discussed regarding the type and concentration of polymers used in liquid and solid SMEDDS formulation. The addition of hypromellose derivatives, vinyl polymers, polyethylene glycol, polyoxyethylene, or polymetacrylate copolymers proved to be effective in inhibiting drug precipitation. Regarding the available literature, hypromellose has been the most commonly used polymeric precipitation inhibitor, added in a concentration of 5 % (m/m). However, the inhibiting ability is mainly governed not only by the physicochemical properties of the polymer but also by the API, therefore the choice of optimal precipitation inhibitor is recommended to be evaluated on an individual basis.

Enabling superior drug loading in lipid-based formulations with lipophilic salts for a brick dust molecule: Exploration of lipophilic counterions and in vitro-in vivo evaluation

Lipid-based formulations (LbFs) are an extensively used approach for oral delivery of poorly soluble drug compounds in the form of lipid suspension and lipid solution. However, the high target dose and inadequate lipid solubility limit the potential of brick dust molecules to be formulated as LbFs. Thus, the complexation of such molecules with a lipophilic counterion can be a plausible approach to improve the solubility in lipid-based solutions via reducing drug crystallinity and polar surface area. The study aimed to enhance drug loading in lipid solution for Nilotinib (Nil) through complexation or salt formation with different lipophilic counterions. We synthesized different lipophilic salts/ complexes via metathesis reactions and confirmed their formation by 1H NMR and FTIR. Docusate-based lipophilic salt showed improved solubility in medium-chain triglycerides (∼7 to 7.5-fold) and long-chain triglycerides (∼30 to 35-fold) based lipids compared to unformulated crystalline Nil. The increased lipid solubility could be attributed to the reduction in drug crystallinity which was further confirmed by the PXRD and DSC. Prototype LbFs were prepared to evaluate drug loading and their physicochemical characteristics. The findings suggested that structural features of counterion including chain length and lipophilicity affect the drug loading in LbF. In addition, physical stability testing of formulations was performed, inferring that aliphatic sulfate-based LbFs were stable with no sign of drug precipitation or salt disproportionation. An in vitro lipolysis-permeation study revealed that the primary driver of absorptive flux is the solubilization of the drug and reduced amount of lipid. Further, the in vivo characterization was conducted to measure the influence of increased drug load on oral bioavailability. Overall, the results revealed enhanced absorption of lipophilic salt-based LbF over unformulated crystalline Nil and conventional LbF (drug load equivalent to equilibrium solubility) which supports the idea that lipophilic salt-based LbF enhances drug loading, and supersaturation-mediated drug solubilization, unlocking the full potential of LbF.

Early evaluation of opportunities in oral delivery of PROTACs to overcome their molecular challenges

PROteolysis TArgeting Chimeras (PROTACs) offer new opportunities in modern medicine by targeting proteins that are intractable to classic inhibitors. Heterobifunctional in nature, PROTACs are small molecules that offer a unique mechanism of protein degradation by hijacking the ubiquitin-mediated protein degradation pathway, known as the ubiquitin-proteasome system. Herein, we present an analysis on the structural characteristics of this novel chemical modality. Furthermore, we review and discuss the formulation opportunities to overcome the oral delivery challenges of PROTACs in drug discovery.

Thymoquinone-loaded self-nano-emulsifying drug delivery system against ischemia/reperfusion injury

In the present study, a self-nano-emulsifying drug delivery system (SNEDDS) was developed to evaluate the efficiency of thymoquinone (TQ) in hepatic ischemia/reperfusion. SNEDDS was pharmaceutically characterized to evaluate droplet size, morphology, zeta potential, thermodynamic stability, and dissolution/diffusion capacity. Animals were orally pre-treated during 10 days with TQ-loaded SNEDDS. Biochemical analyses, hematoxylin-eosin staining, indirect immunofluorescence, and reverse transcription polymerase chain reaction (RT-PCR) were carried out to assess cell injury, oxidative stress, inflammation, and apoptosis. The TQ formulation showed good in vitro characteristics, including stable nanoparticle structure and size with high drug release rate. In vivo determinations revealed that TQ-loaded SNEDDS pre-treatment of rats maintained cellular integrity by decreasing transaminase (ALT and AST) release and preserving the histological characteristics of their liver. The antioxidant ability of the formulation was proven by increased SOD activity, reduced MDA concentration, and iNOS protein expression. In addition, this formulation exerted an anti-inflammatory effect evidenced by reduced plasma CRP concentration, MPO activity, and gene expressions of TLR-4, TNF-α, NF-κB, and IL-6. Finally, the TQ-loaded SNEDDS formulation promoted cell survival by enhancing the Bcl-2/Bax ratio. In conclusion, our results indicate that TQ encapsulated in SNEDDS significantly protects rat liver from I/R injury.

Assessment of in Vivo Performance of Lipid-Based Formulations: Correlation between in Vitro Drug Release Profiles and in Vivo Absorption Rate Profiles

The purpose of this study was to assess the in vivo absorption enhancement effects of lipid-based formulations (LBFs) through in vitro release studies. The type IIIA-MC (medium-chain) and type IIIA-LC (long-chain) formulations containing a Biopharmaceutics Classification System (BCS) Class II drug (dipyridamole or ketoconazole) were used as model LBFs. The type IIIA-MC formulation, but not the type IIIA-LC formulation, showed a higher initial absorption rate than the control suspension for both model drugs in rats. An in vitro side-by-side chamber system coupled with a lipid digestion model was used to measure free drugs, available for intestinal absorption, that are released from a model LBF. The profiles of free drug concentration on the donor side were determined by calculating the ratio of permeation rate (LBF/suspension) at every sampling interval. The in vitro free drug concentration was immediately supersaturated when the digestion of type IIIA-MC formulation was initiated for both drugs, which would cause the initially high absorption rate in rats. In contrast, the free concentration of the type IIIA-LC formulation became lower than the equilibrium solubility over time for both drugs. Overall, the profiles of in vitro free concentrations were consistent with those of in vivo absorption rates for both drugs and all LBFs. These findings would help predict the in vivo performance and establish an in vitro-in vivo correlation (IVIVC) of LBFs.

Lipid based formulations as supersaturating oral delivery systems: From current to future industrial applications

Lipid-based formulations, in particular supersaturated lipid-based formulations, are important delivery approaches when formulating challenging compounds, as especially low water-soluble compounds profit from delivery in a pre-dissolved state. In this article, the classification of lipid-based formulation is described, followed by a detailed discussion of different supersaturated lipid-based formulations and the recent advances reported in the literature. The supersaturated lipid-based formulations discussed include both the in situ forming supersaturated systems as well as the thermally induced supersaturated lipid-based formulations. The in situ forming drug supersaturation by lipid-based formulations has been widely employed and numerous clinically available products are on the market. There are some scientific gaps in the field, but in general there is a good understanding of the mechanisms driving the success of these systems. For thermally induced supersaturation, the technology is not yet fully understood and developed, hence more research is required in this field to explore the formulations beyond preclinical studies and initial clinical trials.

The Effects of Degree and Duration of Supersaturation on In Vivo Absorption Profiles for Highly Permeable Drugs, Dipyridamole and Ketoconazole

The prediction of oral absorption from a supersaturating drug delivery system (SDDS) remains a significant challenge. Here we evaluated the effects of the degree and duration of supersaturation on in vivoabsorption for dipyridamole and ketoconazole. Various dose concentrations of supersaturated suspensions were prepared by a pH shift method, and in vitro dissolution and in vivo absorption profiles were determined. For dipyridamole, the duration of supersaturation decreased with the increase of the dose concentration owing to rapid precipitation. For ketoconazole, the initially constant dissolved concentrations due probably to the liquid-liquid phase separation (LLPS) as a reservoir were observed at high dose concentrations. However, the LLPS did not delay the peak plasma concentration of ketoconazole in rats, indicating that drug molecules were immediately released from the oil phase to the bulk aqueous phase. For both model drugs, the degree of supersaturation, but not the duration of supersaturation, correlated with systemic exposure, indicating quick drug absorption before precipitation. Therefore, the degree of supersaturation is an important parameter compared with the duration of supersaturation for enhancing the in vivo absorption of highly permeable drugs. These findings would help develop a promising SDDS.

Supersaturating lipid-based solid dispersion of atazanavir provides enhanced solubilization and supersaturation in the digestive aqueous phase

Understanding and controlling the drug solubilization in digestive environment is of great importance in the design of lipid based solid dispersion (LBSD) for oral delivery of poorly aqueous soluble drugs. In the current study we determined the extent of drug solubilization and supersaturation of supersaturating lipid based solid dispersion which is governed by formulation variables like drug payload, lipid composition, solid carrier properties and lipid to solid carrier ratio. Initially, the impact of lipid chain length and drug payload on drug solubilization in lipid preconcentrate and dispersibility were evaluated to design liquid LbF of the model antiretroviral drug, atazanavir. The temperature induced supersaturation method enhanced the drug payload in medium chain triglyceride formulation at 60 °C. Further, the selected liquid supersaturated LbF was transformed into solid state LbF by employing different solid carriers including silica (Neusilin® US2 and Aerosil® 200), clay (Montmorillonite and Bentonite) and polymer (HPMC-AS and Kollidon® CL-M). The fabricated LBSDs were evaluated for solid state characterization to identify the physical nature of drug. In vitro digestion studies were conducted using pH-stat lipolysis method to assess the supersaturation propensity in aqueous digestive phase. Results revealed that LBSDs with silica and polymer carriers showed maximum drug solubilization throughout experiment compared to liquid LbF. The ionic interaction between drug-clay particles significantly reduced the ATZ partitioning from clay based LBSDs. LBSDs with dual purpose solid carrier like HPMC-AS and Neusilin® US2 offers the potential to improve drug solubilization of ATZ for physiologically relevant time. Lastly, we conclude that evaluation of formulation variables is crucial to achieve optimal performance of supersaturating LBSD.

[Elucidation and Prediction of Absorption Behavior After Oral Administration of Poorly Water-Soluble Drugs as Different Lipid-Based Formulations]

Lipid-based formulations (LBFs) are isotropic mixtures typically comprising lipids, surfactants, and/or co-solvents, in which drugs are pre-solubilized. After oral administration, LBFs are piggybacked into endogenous lipid digestion pathways. This triggers drug super-saturation and improves absorption. However, super-saturation poses a risk of drug precipitation, which generally leads to poor drug absorption. Furthermore, a series of aqueous colloidal species including digestion products (typically fatty acids and monoglycerides) and endogenous molecules (bile acids and phospholipids) increase the drug solubilization capacity of the intestinal fluid (compared with that of the normal intestinal fluid). However, the solubilization/precipitation behavior may change according to the LBF composition (e.g., the drug loading amount and type of formulation excipients), which may ultimately lead to differences in oral absorption. This review summarizes the results of the evaluation and prediction of the effect of LBFs composition on oral absorption and provides an in-depth understanding of the drug absorption mechanisms when using LBFs.

Supersaturation-Based Drug Delivery Systems: Strategy for Bioavailability Enhancement of Poorly Water-Soluble Drugs

At present, the majority of APIs synthesized today remain challenging tasks for formulation development. Many technologies are being utilized or explored for enhancing solubility, such as chemical modification, novel drug delivery systems (microemulsions, nanoparticles, liposomes, etc.), salt formation, and many more. One promising avenue attaining attention presently is supersaturated drug delivery systems. When exposed to gastrointestinal fluids, drug concentration exceeds equilibrium solubility and a supersaturation state is maintained long enough to be absorbed, enhancing bioavailability. In this review, the latest developments in supersaturated drug delivery systems are addressed in depth.

Hydroxypropyl Cellulose for Drug Precipitation Inhibition: From the Potential of Molecular Interactions to Performance Considering Microrheology

There has been recent interest in using hydroxypropyl cellulose (HPC) for supersaturating drug formulations. This study investigated the potential for molecular HPC interactions with the model drug celecoxib by integrating novel approaches in the field of drug supersaturation analysis. Following an initial polymer characterization study, quantum-chemical calculations and molecular dynamics simulations were complemented with results of inverse gas chromatography and broadband diffusing wave spectroscopy. HPC performance was studied regarding drug solubilization and kinetics of desupersaturation using different grades (i.e., HPC-UL, SSL, SL, and L). The results suggested that the potential contribution of dispersive interactions and hydrogen bonding depended strongly on the absence or presence of the aqueous phase. It was proposed that aggregation of HPC polymer chains provided a complex heterogeneity of molecular environments with more or less excluded water for drug interaction. In precipitation experiments at a low aqueous polymer concentration (i.e., 0.01%, w/w), grades L and SL appeared to sustain drug supersaturation better than SSL and UL. However, UL was particularly effective in drug solubilization at pH 6.8. Thus, a better understanding of drug-polymer interactions is important for formulation development, and polymer blends may be used to harness the combined advantages of individual polymer grades.

The Influence of Fed State Lipolysis Inhibition on the Intraluminal Behaviour and Absorption of Fenofibrate from a Lipid-Based Formulation

The bioavailability of lipophilic drugs may or may not be increased when administered with food due to increased solubilisation in fed state gastrointestinal (GI) fluids. The in vivo interplay between drug solubilisation, lipid phase digestion and drug absorption is complex and remains poorly understood. This study aimed to investigate the role of fed state GI lipolysis on the intraluminal behaviour and absorption of fenofibrate, formulated as the lipid-based formulation Fenogal. Therefore, a crossover study was performed in healthy volunteers using orlistat as lipase inhibitor. Fenofibrate concentrations were determined in the proximal jejunum and linked to simultaneously assessed systemic fenofibric acid concentrations. Inhibition of lipolysis by orlistat resulted in a faster onset of absorption in 4 out of 6 volunteers, reflected by a decrease in systemic T_max between 20 and 140 min. In addition, the increase of undigested lipids present in the small intestine upon orlistat co-administration sustained drug solubilisation for a longer period, resulting in higher fenofibrate concentrations in the jejunum and improved absorption in 5 out of 6 volunteers (median AUC_0–8h 8377 vs. 5832 μM.min). Sustaining drug solubilisation in the lipid phase may thus contribute to the absorption of lipophilic drugs. More research into the different mechanisms underlying lipophilic drug absorption from fed state media at different levels of digestion is warranted.

Study and Computational Modeling of Fatty Acid Effects on Drug Solubility in Lipid-Based Systems

Lipid-based systems have many advantages in formulation of poorly water-soluble drugs but issues of a limited solvent capacity are often encountered in development. One of the possible solubilization approaches of especially basic drugs could be the addition of fatty acids to oils but currently, a systematic study is lacking. Therefore, the present work investigated apparently neutral and basic drugs in medium chain triglycerides (MCT) alone and with added either caproic acid (C6), caprylic acid (C8), capric acid (C10) or oleic acid (C18:1) at different levels (5 - 20%, w/w). A miniaturized solubility assay was used together with X-ray diffraction to analyze the residual solid and finally, solubility data were modeled using the conductor-like screening model for real solvents (COSMO-RS). Some drug bases had an MCT solubility of only a few mg/ml or less but addition of fatty acids provided in some formulations exceptional drug loading of up to about 20% (w/w). The solubility changes were in general more pronounced the shorter the chain length was and the longest oleic acid even displayed a negative effect in mixtures of celecoxib and fenofibrate. The COSMO-RS prediction accuracy was highly specific for the given compounds with root mean square errors (RMSE) ranging from an excellent 0.07 to a highest value of 1.12. The latter was obtained with the strongest model base pimozide for which a new solid form was found in some samples. In conclusion, targeting specific molecular interactions with the solute combined with mechanistic modeling provides new tools to advance lipid-based drug delivery.

In Vitro-In Vivo Correlation in Cocrystal Dissolution: Consideration of Drug Release Profiles Based on Coformer Dissolution and Absorption Behavior

This study assessed the in vitro-in vivo correlation in cocrystal dissolution based on the coformer behavior. 4-Aminobenzoic acid (4ABA) was used as a coformer. Cocrystals of poorly water-soluble drugs with 4ABA, ketoconazole cocrystal (KTZ-4ABA), posaconazole cocrystal (PSZ-4ABA), and itraconazole cocrystal (ITZ-4ABA) were used. These three cocrystals generated supersaturated solutions in fasted state simulated intestinal fluid (FaSSIF) in a small-scale, 8 mL dissolution vessel. The time profile of the dissolved amount of 4ABA, an indicator of cocrystal dissolution, was significantly different among the three cocrystals. Under the conditions utilized, half of the KTZ-4ABA cocrystal solid rapidly dissolved within 5 min and the dissolved amount (% of applied amount) of KTZ and 4ABA was the same. Then, even though the residual solid cocrystal gradually dissolved, KTZ precipitated with time. The PSZ-4ABA cocrystal dissolved in a linear fashion with time but the dissolved concentration of PSZ reached a plateau in the supersaturated state and was maintained for at least 2 h. The dissolution rate of ITZ-4ABA was very slow compared to those of the other cocrystals, but a similar tendency was observed between cocrystal dissolution and the dissolved amount of ITZ. The rank order of the cocrystal dissolution rate based on the conformer concentration was KTZ-4ABA > PSZ-4ABA > ITZ-4ABA. Furthermore, cocrystallization of the three drugs with 4ABA significantly enhanced the oral drug absorption in rats. The rank order of the in vivo cocrystal dissolution rate by a deconvolution analysis with the plasma concentration-time profile of 4ABA was KTZ-4ABA > PSZ-4ABA > ITZ-4ABA, which corresponded well with the in vitro dissolution profiles of the cocrystals. These results indicate that analysis of cocrystal dissolution based on the coformer behavior may be useful to evaluate the in vitro and in vivo cocrystal dissolution.

In vitro and in vivo correlation for lipid-based formulations: Current status and future perspectives

Lipid-based formulations (LBFs) have demonstrated a great potential in enhancing the oral absorption of poorly water-soluble drugs. However, construction of in vitro and in vivo correlations (IVIVCs) for LBFs is quite challenging, owing to a complex in vivo processing of these formulations. In this paper, we start with a brief introduction on the gastrointestinal digestion of lipid/LBFs and its relation to enhanced oral drug absorption; based on the concept of IVIVCs, the current status of in vitro models to establish IVIVCs for LBFs is reviewed, while future perspectives in this field are discussed. In vitro tests, which facilitate the understanding and prediction of the in vivo performance of solid dosage forms, frequently fail to mimic the in vivo processing of LBFs, leading to inconsistent results. In vitro digestion models, which more closely simulate gastrointestinal physiology, are a more promising option. Despite some successes in IVIVC modeling, the accuracy and consistency of these models are yet to be validated, particularly for human data. A reliable IVIVC model can not only reduce the risk, time, and cost of formulation development but can also contribute to the formulation design and optimization, thus promoting the clinical translation of LBFs.

Development of Gelucire® 48/16 and TPGS Mixed Micelles and Its Pellet Formulation by Extrusion Spheronization Technique for Dissolution Rate Enhancement of Curcumin

The oral bioavailability of curcumin is limited, attributed to its low solubility or dissolution and poor absorption. Herein, the study describes formulation of curcumin-loaded mixed micelles of Gelucire® 48/16 and TPGS for its dissolution rate enhancement. Curcumin was dispersed in these molten lipidic surfactants which was then adsorbed on carrier and formulated as pellets by extrusion spheronization. Critical micelle concentration (CMC) of binary mixture of Gelucire® 48/16 and TPGS was lower than their individual CMC demonstrating the synergistic behavior of mixture. Thermodynamic parameters like partition coefficient and Gibbs free energy of solubilization indicated that mixed micelles were more efficient than micelles of its individual components in curcumin solubilization. Dynamic light scattering (DLS) suggested slight increase in micellar size of mixed micelles than its components suggesting curcumin loading in mixed micelles. Fourier transform infrared spectroscopy (FTIR) revealed that phenolic hydroxyl group interacts with lipids which contribute to its enhanced solubility. Furthermore, the differential scanning calorimetry (DSC) and X-ray diffraction (XRD) study indicated the conversion of crystalline curcumin into amorphous form. In the pellet formulation, Gelucire® 48/16 acted as a binder and eliminated the requirement of additional binder. Microcrystalline cellulose (MCC) forms wet mass and retards the release of curcumin from pellets. Increase in concentration of water-soluble diluent increased drug release. The optimized formulation released more than 90% drug and maintains supersaturation level of curcumin for 2 h. Thus, mixed micellar system was effective delivery system for curcumin while pellet formulation is an interesting formulation strategy consisting semi-solid lipids.

Lipophilic Salts and Lipid-Based Formulations: Enhancing the Oral Delivery of Octreotide

PURPOSE

Successful oral peptide delivery faces two major hurdles: low enzymatic stability in the gastro-intestinal lumen and poor intestinal membrane permeability. While lipid-based formulations (LBF) have the potential to overcome these barriers, effective formulation of peptides remains challenging. Lipophilic salt (LS) technology can increase the apparent lipophilicity of peptides, making them more suitable for LBF.

METHODS

As a model therapeutic peptide, octreotide (OCT) was converted to the docusate LS (OCT.DoS₂), and compared to the commercial acetate salt (OCT.OAc₂) in oral absorption studies and related in vitro studies, including parallel artificial membrane permeability assay (PAMPA), Caco-2, in situ intestine perfusion, and simulated digestion in vitro models. The in vivo oral absorption of OCT.DoS₂ and OCT.OAc₂ formulated in self-emulsifying drug delivery systems (SEDDS) was studied in rats.

RESULTS

LS formulation improved the solubility and loading of OCT in LBF excipients and OCT.DoS₂ in combination with SEDDS showed higher OCT absorption than the acetate comparator in the in vivo studies in rats. The Caco-2 and in situ intestine perfusion models indicated no increases in permeability for OCT.DoS₂. However, the in vitro digestion studies showed reduced enzymatic degradation of OCT.DoS₂ when formulated in the SEDDS formulations. Further in vitro dissociation and release studies suggest that the enhanced bioavailability of OCT from SEDDS-incorporating OCT.DoS₂ is likely a result of higher partitioning into and prolonged retention within lipid colloid structures.

CONCLUSION

The combination of LS and LBF enhanced the in vivo oral absorption of OCT primarily via the protective effect of LBF sheltering the peptide from gastrointestinal degradation.

Exploring precipitation inhibitors to improve in vivo absorption of cinnarizine from supersaturated lipid-based drug delivery systems

Supersaturated lipid-based drug delivery systems are increasingly being explored as a bio-enabling formulation approach, particularly in preclinical evaluation of poorlywater-soluble drugs. While increasing the drug load through thermally-induced supersaturation resulted in enhanced in vivo exposure for some drugs, for others, such as cinnarizine, supersaturated lipid-based systems have not been found beneficial to increase the in vivo bioavailability. We hypothesized that incorporation of precipitation inhibitors to reduce drug precipitation may address this limitation. Therefore, pharmacokinetic profiles of cinnarizine supersaturated lipid-based drug delivery systems with or without precipitation inhibitors were compared. Five precipitation inhibitors were selected for investigation based on a high throughput screening of twenty-one excipients. In vivo results showed that addition of 5% precipitation inhibitors to long chain monoglyceride (LCM) or medium chain monoglyceride (MCM) formulations showed a general trend of increases in cinnarizine bioavailability, albeit only statistically significantly increased for Poloxamer 407 + LCM system (i.e. 2.7-fold increase in AUC_0-24h compared to LCM without precipitation inhibitors). It appeared that precipitation inhibitors mitigated the risk of in vivo precipitation of cinnarizine from sLBDDS and overall, bioavailability was comparable to that previously reported for cinnarizine after dosing of non-supersaturated lipid systems. In summary, for drugs which are prone to precipitation from supersaturated lipid-based drug delivery systems, such as cinnarizine, inclusion of precipitation inhibitors mitigates this risk and provides the opportunity to maximize exposure which is ideally suited in early efficacy and toxicology evaluation.

Mechanisms of drug solubilization by polar lipids in biorelevant media

Despite the widespread use of lipid excipients in both academic research and oral formulation development, rational selection guidelines are still missing. In the current study, we aimed to establish a link between the molecular structure of commonly used polar lipids and drug solubilization in biorelevant media. The solubilization of fenofibrate by 13 phospholipids, 11 fatty acids and 2 monoglycerides was studied by an in vitro model of the upper GI tract. The main trends were verified with progesterone and danazol. It was revealed that to alter drug solubilization in biorelevant media, the polar lipids must form mixed colloidal aggregates with the bile. Such aggregates are formed when: (1) the polar lipid is used at a sufficiently high concentration (relative to its mixed critical micellar concentration) and (2) its hydrophobic chain has a melting temperature (T_m) < 37 °C. When these two conditions are met, the increased polar lipid chain length increases the drug solubilization capacity. Hence, long chain (C18) unsaturated polar lipids show best drug solubilization, due to the combination of long chain length and low T_m. Polar lipids with T_m significantly higher than 37 °C (e.g. C16 and C18 saturated compounds) do not impact drug solubilization in biorelevant media, due to limited association in mixed colloidal aggregates. The hydrophilic head group also has a dramatic impact on the drug solubilization enhancement, with polar lipids performance decreasing in the order [choline phospholipids] > [monoglycerides] > [fatty acids]. As both the acyl chain and head group types are structural features of the polar lipids, and not of the solubilized drugs, the described trends in drug solubilization should hold true for a variety of hydrophobic molecules.

Factors and dosage formulations affecting the solubility and bioavailability of P-glycoprotein substrate drugs

Introduction: Expression of P-glycoprotein (P-gp) increases toward the distal small intestine, implying that the duodenum is the preferential absorption site for P-gp substrate drugs. Oral bioavailability of poorly soluble P-gp substrate drugs is low and varied but increases with high-fat meals that supply lipoidal components and bile in the duodenum.Areas covered: Absorption properties of P-gp substrate drugs along with factors and oral dosage formulations affecting their solubility and bioavailability were reviewed with PubMed literature searches. An overview is provided from the viewpoint of the 'spring-and-parachute approach' that generates supersaturation of poorly soluble P-gp substrate drugs.Expert opinion: The oral bioavailability of P-gp substrate drugs is difficult to predict because of their low solubility, preferential absorption sites, and overlapping substrate specificities with CYP3A4, along with the scattered intestinal P-gp expression/function. To attain high and steady oral bioavailability of poorly soluble P-gp substrate drugs, physicochemical modification of drugs to improve solubility, or oral dosage formulations that generate long-lasting supersaturation in the duodenum, is preferred. In particular, supersaturable lipid-based drug delivery systems that can increase passive diffusion and/or lymphatic absorption are effective and applicable to many poorly soluble P-gp substrate drugs.

Interaction with biliary and pancreatic fluids drives supersaturation and drug absorption from lipid-based formulations of low (saquinavir) and high (fenofibrate) permeability poorly soluble drugs

Drug absorption from lipid-based formulations (LBFs) in the gastrointestinal (GI) tract is the result of a series of processes, including formulation dispersion, interaction with biliary and pancreatic secretions, drug solubilisation and supersaturation, and finally intestinal permeability. Optimal formulation design is dependent on a good understanding of the limitations to, and drivers of, absorption, but for LBFs the complexity of these processes makes data interpretation complex. The current study has re-examined a previous in vitro digestion-in situ perfusion model to increase physiological relevance and has used this model to examine drug absorption from LBFs. The composition of rat bile and jejunal fluid was also characterised to identify in vivo-relevant conditions. Digestion was initiated using rat bile/pancreatic fluid and the formulation and digestive enzymes mixed immediately prior to entry into the jejunum (allowing dilution/digestion to occur at the absorptive site). These conditions were employed to study drug absorption from LBFs of high (fenofibrate, FFB) and low (saquinavir, SQV) permeability compounds. The impact of polymeric precipitation inhibitors (PPIs) was also evaluated. For FFB, supersaturation, initiated by formulation interaction with biliary/pancreatic fluids, appeared to drive absorption and the addition of the PPIs poly(glycidyl methacrylate) (PPGAE) and hydroxypropylmethyl cellulose (HPMC), reduced drug precipitation, increased FFB supersaturation and increased absorption from a Type IV LBF of FFB. For a Type IIIB LBF however, PPIs were ineffective at increasing absorption. The impact of PPIs on the absorption of a less permeable drug, SQV, was similarly evaluated and again drug absorption appeared to be related to the extent of supersaturation, although in this case PPI were unable to promote absorption. For both FFB and SQV, drug absorption patterns obtained with the in vitro digestion-in situ perfusion mode, correlated well with in vitro supersaturation data and in vivo drug exposure data from oral bioavailability studies. The data are consistent with a mode of drug absorption where rapid dilution of LBFs with biliary and pancreatic secretions at the absorptive site in the upper small intestine drives transient supersaturation, that supersaturation is a significant driver of drug absorption for both low and high permeability drugs, and that PPIs delay drug precipitation, enhance supersaturation and promote drug absorption in a drug and formulation specific manner.

Ionic Liquid Forms of the Antimalarial Lumefantrine in Combination with LFCS Type IIIB Lipid-Based Formulations Preferentially Increase Lipid Solubility, In Vitro Solubilization Behavior and In Vivo Exposure

Lipid based formulations (LBFs) are commonly employed to enhance the absorption of highly lipophilic, poorly water-soluble drugs. However, the utility of LBFs can be limited by low drug solubility in the formulation. Isolation of ionizable drugs as low melting, lipophilic salts or ionic liquids (ILs) provides one means to enhance drug solubility in LBFs. However, whether different ILs benefit from formulation in different LBFs is largely unknown. In the current studies, lumefantrine was isolated as a number of different lipophilic salt/ionic liquid forms and performance was assessed after formulation in a range of LBFs. The solubility of lumefantrine in LBF was enhanced 2- to 80-fold by isolation as the lumefantrine docusate IL when compared to lumefantrine free base. The increase in drug loading subsequently enhanced concentrations in the aqueous phase of model intestinal fluids during in vitro dispersion and digestion testing of the LBF. To assess in vivo performance, the systemic exposure of lumefantrine docusate after administration in Type II-MCF, IIIB-MCF, IIIB-LCF, and IV formulations was evaluated after oral administration to rats. In vivo exposure was compared to control lipid and aqueous suspension formulations of lumefantrine free base. Lumefantrine docusate in the Type IIIB-LCF showed significantly higher plasma exposure compared to all other formulations (up to 35-fold higher). The data suggest that isolation of a lipid-soluble IL, coupled with an appropriate formulation, is a viable means to increase drug dose in an oral formulation and to enhance exposure of lumefantrine in vivo.

Plant exine capsules based encapsulation strategy: A high loading and long-term effective delivery system for nobiletin

The properties of high loading capacity and long-term absorption are of great significance in the field of nutraceuticals or drugs delivery. Herein, we developed an innovative method to achieve these expected effects using plant exine capsules, a kind of natural pollen grains, which could provide large internal cavities for loading and robust exine against harsh conditions. In our work, we firstly made a soluble mixture of glycerol monostearate (GM) and nobiletin (NOB) inside the cavities of plant exine capsules by ultrasound with high temperature to obtain a supersaturated state of NOB, which could be characterized by XRD, DSC and FTIR. After that, the loaded capsules were cooled to room temperature. Alginate hydrogels were then selected for encapsulating and further controlling NOB release in simulated gastric and intestinal conditions. As a result, it demonstrated that our approach was able to reach an extremely high NOB loading capacity of 770 ± 40 mg/g using sunflower pollen grains (SPGs). Meanwhile, the existence of GM, SPGs and alginate hydrogels all retarded the release of the NOB synergistically, thus taking a slow release effect in the stomach while a long-term effective absorption in the intestine. Taken together, our processing method of encapsulating hydrophobic nutraceuticals provides an important insight for broadening the applications of nutraceutical or drug encapsulation and delivery.

Development of a Novel Nano-emulsion Formulation to Improve Intestinal Absorption of Cannabidiol

BACKGROUND

Cannabidiol (CBD) is highly lipophilic, and its oral bioavailability is known to be very low in humans. In this study, we developed a novel nanoemulsion preparation of CBD (CBD-NE) to improve the poor solubility and absorption of CBD. The pharmacokinetic profiles of CBD in rats were evaluated after oral administrations of CBD oil and CBD-NE, and the effect of bile secretion on CBD absorption was also evaluated.

METHODS

The CBD-NE formulation developed in this study consisted of vitamin E acetate, ethanol, Tween-20, and distilled water (1.7/3.8/70/24.5, w/w%). A CBD oil formulation (CBD oil, control) 100 mg/kg or CBD-NE 50 mg/kg was orally administered to rats, and the blood samples were collected over time. Moreover, the CBD oil or CBD-NE was orally administered to bile-fistulated rats, and the pharmacokinetic profiles of CBD were also evaluated. CBD concentrations in plasma were measured using LC-MS/MS.

RESULTS

The particle size of CBD-NE was 35.3 ± 11.8 nm. Mean Tmax of CBD-NE was shortened significantly by the factor of 3 (from 8.00 to 2.40 h, p < 0.001) and AUC0-∞/dose increased by 65% (from 0.272 ± 0.045 to 0.448 ± 0.087 h L/kg) compared with CBD oil. AUC0-∞/dose and Cmax/dose after oral administration of CBD oil were significantly reduced by the factor of 27 and 23 (p < 0.05 and p < 0.01), respectively, in bile-fistulated rats compared with the untreated rats. In contrast, all pharmacokinetic parameters after oral administration of CBD-NE were not significantly different between the untreated and bile-fistulated rats. Therefore, these results demonstrated that conventional CBD oil formulation but not CBD-NE requires bile-mediated micelle formation.

CONCLUSIONS

The novel NE formulation developed in this study successfully improved the absorption of CBD regardless of bile secretion. The newly developed oral CBD-NE preparation could be useful to achieve a more stable and quicker onset of action by CBD.

Surface Wettability Modulated by Surfactant and Its Effects on the Drug Release and Absorption of Fenofibrate Solid Dispersions

The objective of this study is to explore the surface wettability modulated by a surfactant and its effects on the drug release and absorption of fenofibrate solid dispersions (FF SDs). Both the polyvinylpyrrolidone/sodium lauryl sulfate (PVP/SLS) coprecipitate and FF SDs were prepared by solvent evaporation method. The contact angle of PVP/SLS coprecipitate with various PVP/SLS weight ratios was determined to screen out the suitable content of SLS incorporated in FF SDs. Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) was used to analyze the surface composition of the PVP/SLS coprecipitate, suggesting that SLS molecules were prone to concentrate on the carrier surface. The physicochemical characteristics of FF, PVP, SLS, FF SDs, and FF physical mixtures (PMs) were evaluated by thermal analysis, XRD, FTIR, and SEM, which revealed that FF was molecularly dispersed in SDs. The interaction between SLS and PVP or FF confirmed by FTIR would affect the surface morphology of SDs. Finally, the contact angle of FF SDs was measured to explore the effects of surface wettability on the dissolution behavior and drug absorption of FF SDs. The interesting thing is that the wettability of the PVP/SLS coprecipitate was positively related to that of FF SDs. The improved wettability of FF SDs or the PVP/SLS coprecipitate by adding SLS contributed to the slight enhancement of initial drug release and absorption, which implied that wettability would be a promising tool in the formulation studies.

Niclosamide repositioning for treating cancer: Challenges and nano-based drug delivery opportunities

Drug repositioning may be defined as a process when new biological effects for known drugs are identified, leading to recommendations for new therapeutic applications. Niclosamide, present in the Model List of Essential Medicines, from the World Health Organization, has been used since the 1960s for tapeworm infection. Several preclinical studies have been shown its impressive anticancer effects, which led to clinical trials for colon and prostate cancer. Despite high expectations, proof of efficacy and safety are still required, which are associated with diverse biopharmaceutical challenges, such as the physicochemical properties of the drug and its oral absorption, and their relationship with clinical outcomes. Nanostructured systems are innovative drug delivery strategies, which may provide interesting pharmaceutical advantages for this candidate. The aim of this review is to discuss challenges involving niclosamide repositioning for cancer diseases, and the opportunities of therapeutic benefits from nanosctrutured system formulations containing this compound.

In vitro digestion models to evaluate lipid based drug delivery systems; present status and current trends

During the past two decades, a range of in vitro models simulating the digestion processes occurring in the stomach and small intestine have been developed to characterize lipid based drug delivery systems (LbDDSs). This review describes the presently existing range of in vitro digestion models and their use in the field of oral drug delivery. The models are evaluated in terms of their suitability to assess LbDDSs, and their ability to produce in vitro - in vivo correlations (IVIVCs). While the pH-stat lipolysis model is by far the most commonly utilized in vitro digestion model in relation to characterizing LbDDSs, a series of recent studies have shown a lack of IVIVCs limiting its future use. Presently, no single in vitro digestion model exists which is able to predict the in vivo performance of various LbDDSs. However, recent research has shown the potential of combined digestion-permeation models as well as species specific digestion models.

Drug supersaturation during formulation digestion, including real-time analytical approaches

Self-emulsifying and other lipid-based drug delivery systems have drawn considerable interest from pharmaceutical scientists for managing oral delivery of poorly water-soluble compounds. Following administration, self-emulsifying systems exhibit complex aqueous dispersion and digestion in the gastro-intestinal tract. These processes generally result in drug supersaturation, which leads to enhanced absorption or the high drug concentrations may cause precipitation with erratic and variable oral bioavailability. This review briefly outlines drug supersaturation obtained from self-emulsifying and other lipid-based formulations; recent advancements of in vitro lipolysis testing are also discussed. Further, a main focus is mechanisms by which supersaturation is triggered from gastro-intestinal processes, as well as analytical techniques that are promising from a research and development perspective. Comparatively simple approaches are presented together with more sophisticated process analytics to enable direct examination of kinetic changes. The analytical methods together with their sensor probes are discussed in detail to clarify opportunities as well as technical limitations. Some of the more sophisticated methods, including those based on synchrotron radiation, are primarily research oriented despite interesting experimental findings from an industrial viewpoint. The availability of kinetic data further opens the door to mathematical modeling of supersaturation and precipitation versus permeation, which lays the groundwork for better in vitro to in vivo correlations as well as for physiologically-based modeling of lipid-based systems.

Basic principles of drug delivery systems - the case of paclitaxel

Cancer is the second cause of death worldwide, exceeded only by cardiovascular diseases. The prevalent treatment currently used against metastatic cancer is chemotherapy. Among the most studied drugs that inhibit neoplastic cells from acquiring unlimited replicative ability (a hallmark of cancer) are the taxanes. They operate via a unique molecular mechanism affecting mitosis. In this review, we show this mechanism for one of them, paclitaxel, and for other (non-taxanes) anti-mitotic drugs. However, the use of paclitaxel is seriously limited (its bioavailability is <10%) due to several long-standing challenges: its poor water solubility (0.3 μg/mL), its being a substrate for the efflux multidrug transporter P-gp, and, in the case of oral delivery, its first-pass metabolism by certain enzymes. Adequate delivery methods are therefore required to enhance the anti-tumor activity of paclitaxel. Thus, we have also reviewed drug delivery strategies in light of the various physical, chemical, and enzymatic obstacles facing the (especially oral) delivery of drugs in general and paclitaxel in particular. Among the powerful and versatile platforms that have been developed and achieved unprecedented opportunities as drug carriers, microemulsions might have great potential for this aim. This is due to properties such as thermodynamic stability (leading to long shelf-life), increased drug solubilization, and ease of preparation and administration. In this review, we define microemulsions and nanoemulsions, analyze their pertinent properties, and review the results of several drug delivery carriers based on these systems.

Cell penetrating peptides functionalized gambogic acid-nanostructured lipid carrier for cancer treatment

Tumor-targeted delivery is considered a crucial component of current anticancer drug development and is the best approach to increase the efficacy and reduce the toxicity. Nanomedicine, particularly ligand-based nanoparticles have shown a great potential for active targeting of tumor. Cell penetrating peptide is one of the promising ligands in a targeted cancer therapy. In this study, the gambogic acid-loaded nanostructured lipid carrier (GA-NLC) was modified with two kinds of cell penetrating peptides (cRGD and RGERPPR). The GA-NLC was prepared by emulsification and solvent evaporation method and coupled with cRGD, RGERPPR, and combination cRGD and RGERPPR to form GA-NLC-cRGD, GA-NLC-RGE, and GA-NLC-cRGD/RGE, respectively. The formulations were characterized by their particle size and morphology, zeta potential, encapsulation efficiency, and differential scanning calorimetry. In vitro cytotoxicity and cellular uptake study of the formulations were performed against breast cancer cell (MDA-MB-231). Furthermore, in vivo biodistribution and antitumor activity of the formulations were determined by in vivo imaging and in tumor-bearing nude mice, respectively. The result of in vitro cytotoxicity study showed that GA-NLC-RGE exhibited a significantly higher cytotoxicity on MDA-MB-231 as compared with GA-NLC and GA-Sol. Similarly, RGE-Cou-6-NLC showed remarkably higher uptake by the cells than other NLCs over the incubation period. The in vivo imaging study has demonstrated that among the formulations, the RGE-decorated DiR-NLC were more accumulated in the tumor site. The in vivo antitumor activity revealed that RGE-GA-NLC inhibits the tumor growth more efficiently than other formulations. In conclusion, RGERPPR has a potential as an effective carrier in targeting drug delivery of anticancer agents.

Preparation and Evaluation of Lipid-Based Liquid Crystalline Formulation of Fenofibrate

BACKGROUND

Many drugs have poor water solubility and so the oral delivery of such drugs is usually associated with limitation of low bioavailability and lack of dose proportionality. Lipid-based liquid crystal (LC) systems are excellent potential formulations for increasing dissolution and bioavailability of drugs. The aim of the present study was to formulate lipid-based LC containing fenofibrate (FFB) as a hydrophobic drug.

MATERIALS AND METHODS

The studied variables included lipid and stabilizer concentrations and the type of stabilizer. The LC formation was identified by the polarized optical microscopic method. The effects of variables on formulation characteristics such as particle size, drug release, and rheological behavior were evaluated.

RESULTS

The results showed that the prepared formulations had the particle size between 42 and 503 nm. The drug release profiles showed that FFB had the continuous release from the formulations and the highest dissolution efficiency was seen in formulation prepared by 1.5% of glyceryl monostearate and 0.5% of Pluronic F127 as the stabilizer. The change of stabilizer type from colloidal silica to Pluronic F127 increased the drug release, significantly.

CONCLUSIONS

In the most formulations of FFB LCs, the DE% was more than the pure drug, and therefore, it seems that the liquid crystalline formulations can be effective for enhancing drug release. Furthermore, drug release rate depended on the stabilizer type so that the presence of colloidal silica caused slower drug release compared to Pluronic F127.

Supersaturation Potential of Ordered Mesoporous Silica Delivery Systems. Part 1: Dissolution Performance and Drug Membrane Transport Rates

Ordered mesoporous silica materials have shown great potential as oral drug delivery systems for poorly soluble drugs. However, the ability of these delivery systems to generate drug supersaturation has not been widely investigated, and the recently noted phenomenon of incomplete drug release is not well understood. Therefore, the aim of this study was to comprehensively evaluate the release of hydrophobic drug molecules into solution from ordered mesoporous silica, focusing on the extent and duration of drug supersaturation. The dissolution and supersaturation behavior of ritonavir, following loading into mesoporous SBA-15 silica particles, was investigated by undertaking simple in vitro dissolution studies in phosphate buffer pH 6.8 and fasted state simulated intestinal fluid, as well as membrane flux studies using a side-by-side diffusion cell apparatus. It was found that supersaturated ritonavir solutions were generated from ritonavir-loaded mesoporous SBA-15 particles; however, drug release was always incomplete, even under sink conditions. In addition, the percentage drug release was observed to decrease significantly as the theoretical supersaturation ratio and dose of ritonavir-loaded SBA-15 formulation increased. The data obtained suggest an equilibrium exists between drug adsorbed to the SBA-15 silica surface and free drug present in solution. The findings described herein are highly significant in aiding our understanding of ordered mesoporous silica as a supersaturating drug delivery system for bioavailability enhancement.

Enhanced delivery of lipophilic bioactives using emulsions: a review of major factors affecting vitamin, nutraceutical, and lipid bioaccessibility

Many researchers are currently developing emulsion-based delivery systems to increase the bioavailability of lipophilic bioactive agents, such as oil-soluble vitamins, nutraceuticals, and lipids. Oil-in-water emulsions can be specifically designed to improve the bioavailability of these bioactives by altering their composition and structural organization. This article reviews recent progress in understanding the impact of emulsion properties on the bioaccessibility of lipophilic bioactive agents, including oil phase composition, aqueous phase composition, droplet size, emulsifier type, lipid physical state, and droplet aggregation state. This knowledge can be used to design emulsions that can enhance the bioavailability and efficacy of encapsulated hydrophobic bioactives.

Polymeric Precipitation Inhibitors Promote Fenofibrate Supersaturation and Enhance Drug Absorption from a Type IV Lipid-Based Formulation

The ability of lipid-based formulations (LBFs) to increase the solubilization, and prolong the supersaturation, of poorly water-soluble drugs (PWSDs) in the gastrointestinal (GI) fluids has generated significant interest in the past decade. One mechanism to enhance the utility of LBFs is to prolong supersaturation via the addition of polymers that inhibit drug precipitation (polymeric precipitation inhibitors or PPIs) to the formulation. In this work, we have evaluated the performance of a range of PPIs and have identified PPIs that are sufficiently soluble in LBF to allow the construction of single phase formulations. An in vitro model was first employed to assess drug (fenofibrate) solubilization and supersaturation on LBF dispersion and digestion. An in vitro-in situ model was subsequently employed to simultaneously evaluate the impact of PPI enhanced drug supersaturation on drug absorption in rats. The stabilizing effect of the polymers was polymer specific and most pronounced at higher drug loads. Polymers that were soluble in LBF allowed simple processing as single phase formulations, while formulations containing more hydrophilic polymers required polymer suspension in the formulation. The lipid-soluble polymers Eudragit (EU) RL100 and poly(propylene glycol) bis(2-aminopropyl ether) (PPGAE) and the water-soluble polymer hydroxypropylmethyl cellulose (HPMC) E4M were identified as the most effective PPIs in delaying fenofibrate precipitation in vitro. An in vitro model of lipid digestion was subsequently coupled directly to an in situ single pass intestinal perfusion assay to evaluate the influence of PPIs on fenofibrate absorption from LBFs in vivo. This coupled model allowed for real-time evaluation of the impact of supersaturation stabilization on absorptive drug flux and provided better discrimination between the different PPIs and formulations. In the presence of the in situ absorption sink, increased fenofibrate supersaturation resulted in increased drug exposure, and a good correlation was found between the degree of in vitro supersaturation and in vivo drug exposure. An improved in vitro-in vivo correlation was apparent when comparing the same formulation under different supersaturation conditions. These observations directly exemplify the potential utility of PPIs in promoting drug absorption from LBF, via stabilization of supersaturation, and further confirm that relatively brief periods of supersaturation may be sufficient to promote drug absorption, at least for highly permeable drugs such as fenofibrate.