Shape-Memory Terpolymer Rods with 17-β-estradiol for the Treatment of Neurodegenerative Diseases: an In Vitro and In Vivo Study

A wearable osmotic microneedle patch provides high-capacity sustained drug delivery in animal models

The maintenance of stable plasma drug concentrations within a therapeutic window can be critical for drug efficacy. Here, we developed a wearable osmotic microneedle (OMN) patch to support sustained drug dosing for at least 24 hours without the use of electronic components. The OMN patch uses an osmotic pressure driving force to deliver drug solution into the skin through three hollow microneedles with diameters of less than 200 micrometers. The rate of drug release was related to the composition and concentration of the osmogen and drug and to the physical properties of the semipermeable membrane separating the low- and high-solute compartments. The OMN patch released the peptide drug exenatide in rats and mice for 24 hours, whereas subcutaneous injection resulted in a burst release and rapid decline in the plasma drug concentration. OMN release of exenatide improved glycemic control in a diabetic mouse model consistent with a sustained effective plasma concentration of the drug. Continuous release of the small-molecule chemotherapeutic drug cytarabine reduced the progression of acute myeloid leukemia in mice more effectively than subcutaneous injection. Further evaluation of the OMN patch in canines demonstrated continuous dosing of cytarabine up to 225 milligrams for 24 hours, satisfying clinical requirements (150 to 300 milligrams daily). OMN patches were well tolerated in human participants with minimal pain or irritation of the skin and a stated preference over other administration routes. This wearable drug delivery system could provide a platform for stable high-dose drug release with convenience and safety.

Advanced drug delivery technologies for postmenopausal effects

Postmenopause is the 12-month absence of menstrual periods, characterized by decreased estrogen and progesterone levels, leading to physical and psychological alterations such as hot flashes, mood swings, sleep disruptions, and skin changes. Present postmenopausal treatments include hormone replacement therapy, non-hormonal drugs, lifestyle modifications, vaginal estrogen therapy, bone health treatments, and alternative therapies. Advanced drug delivery systems (ADDSs) are essential in managing postmenopausal effects (PMEs), offering targeted and controlled delivery to alleviate symptoms and improve overall health. This review emphasizes such ADDSs for addressing PMEs. Emerging trends such as artificial ovaries are also reviewed. Additionally, the prospects of technologies such as additive manufacturing (3D and 4D printing) and artificial intelligence in further tailoring therapeutic strategies against PMEs are provided.

Multifunctional Nanocarriers for Alzheimer's Disease: Befriending the Barriers

Neurodegenerative diseases (NDDs) have been increasing in incidence in recent years and are now widespread worldwide. Neuronal death is defined as the progressive loss of neuronal structure or function which is closely associated with NDDs and represents the intrinsic features of such disorders. Amyotrophic lateral sclerosis, frontotemporal dementia, Alzheimer's, Parkinson's, and Huntington's diseases (AD, PD, and HD, respectively) are considered neurodegenerative diseases that affect a large number of people worldwide. Despite the testing of various drugs, there is currently no available therapy that can remedy or effectively slow the progression of these diseases. Nanomedicine has the potential to revolutionize drug delivery for the management of NDDs. The use of nanoparticles (NPs) has recently been developed to improve drug delivery efficiency and is currently subjected to extensive studies. Nanoengineered particles, known as nanodrugs, can cross the blood-brain barrier while also being less invasive compared to the most treatment strategies in use. Polymeric, magnetic, carbonic, and inorganic NPs are examples of NPs that have been developed to improve drug delivery efficiency. Primary research studies using NPs to cure AD are promising, but thorough research is needed to introduce these approaches to clinical use. In the present review, we discussed the role of metal-based NPs, polymeric nanogels, nanocarrier systems such as liposomes, solid lipid NPs, polymeric NPs, exosomes, quantum dots, dendrimers, polymersomes, carbon nanotubes, and nanofibers and surfactant-based systems for the therapy of neurodegenerative diseases. In addition, we highlighted nanoformulations such as N-butyl cyanoacrylate, poly(butyl cyanoacrylate), D-penicillamine, citrate-coated peptide, magnetic iron oxide, chitosan (CS), lipoprotein, ceria, silica, metallic nanoparticles, cholinesterase inhibitors, an acetylcholinesterase inhibitors, metal chelators, anti-amyloid, protein, and peptide-loaded NPs for the treatment of AD.

Intravaginal Drug Delivery Systems to Treat the Genitourinary Syndrome of Menopause: Towards the Design of Safe and Efficacious Estrogen-loaded Prototypes

Estrogens locally delivered to the vagina by tablets, capsules, rings, pessaries, and creams are the most common and highly recommended platforms to treat the genitourinary syndrome of menopause (GSM). Estradiol, an essential estrogen, is routinely administered alone, or in combination with progestins, to effectively alleviate the symptoms associated with moderate to severe menopause when non-pharmacological interventions are not indicated. Since the risk and side effects of estradiol use depends on the administered amount and duration of use, the lowest effective dose of estradiol is recommended when long-term treatment is required. Although there is a wealth of data and literature comparing vaginally administered estrogen-containing products, there is a lack of information revealing the effect of the delivery system used and formulation constituent's attributes on the efficacy, safety, and patient acceptability of these dosage forms. This review therefore aims to classify and compare various designs of commercially available and non-commercial vaginal 17β-estradiol formulations and analyze their performance in terms of systemic absorption, efficacy, safety, and patient satisfaction and acceptance. The vaginal estrogenic platforms included in this review are the currently marketed and investigational 17β-estradiol tablets, softgel capsules, creams, and rings for the treatment of GSM, based on their different design specifications, estradiol loads, and materials used in their preparation. Additionally, the mechanisms of the effects of estradiol on GSM have been discussed, as well as their potential impact on treatment efficacy and patient compliance.

Effects of 17-β-estradiol released from shape-memory terpolymer rods on sciatic nerve regeneration after injury and repair with chitosan nerve conduit in female rats

The aim of this study was to assess 17-β-estradiol (E2) influence on sciatic nerve regeneration after injury followed by a repair with chitosan conduit in ovariectomized female rats. The study was performed in 2 groups (n = 16) of rats: OVChit - after excision of a fragment of the sciatic nerve, a chitosan conduit was implanted; OVChitE10 group - additionally to chitosan conduit, shape-memory terpolymer rods based on poly(L-lactide-co-glycolide- co-trimethylene carbonate) releasing 17-β-estradiol for 20 weeks were implanted. The mean number of regenerating axons and mean fiber area were significantly greater in 17-β-estradiol-treated animals. In this group, the infiltrate of leukocytes was diminished. The presence of 17-β-estradiol receptors alpha and beta in motoneurons in the spinal cord were discovered. This may indicate the location where 17-β-estradiol affects the regeneration of the injured nerve. Estradiol released from the terpolymer rods for 20 weeks could enhance, to some extent, sciatic nerve regeneration after injury, and diminish the inflammatory reaction. In the future, 17-β-estradiol entrapped in terpolymer rods could be used in the repair of injured peripheral nerves, but there is a need for further studies.

The Role of the Mechanical, Structural, and Thermal Properties of Poly(l-lactide-co-glycolide-co-trimethylene carbonate) in the Development of Rods with Aripiprazole

In this work, we aimed to determine the role of the mechanical, structural, and thermal properties of poly(l-lactide-co-glycolide-co-trimethylene carbonate) (P(l-LA:GA:TMC)) with shape memory in the formulation of implantable and biodegradable rods with aripiprazole (ARP). Hot melt extrusion (HME) and electron beam (EB) irradiation were applied in the formulation process of blank rods and rods with ARP. Rod degradation was carried out in a PBS solution. HPLC; NMR; DSC; compression and tensile tests; molecular weight (M_n); water uptake (WU); and weight loss (WL) analyses; and SEM were used in this study. HME and EB irradiation did not influence the structure of ARP. The mechanical tests indicated that the rods may be safely implanted using a pre-filled syringe. During degradation, no unfavorable changes in terpolymer content were observed. A decrease in the glass transition temperature and the M_n, and an increase in the WU and the WL were revealed. The loading of ARP and EB irradiation induced earlier pore formation and more intense WU and WL changes. ARP was released in a tri-phasic model with the lag phase; therefore, the proposed formulation may be administered as a delayed-release system. EB irradiation was found to accelerate ARP release.

Natural and synthetic estrogens specifically alter nicotine demand and cue-induced nicotine seeking in female rats

Women have more difficulty maintaining smoking cessation than men, and experience greater withdrawal symptomatology as well as higher prevalence of relapse. Further, currently available treatments for smoking cessation, such as the nicotine patch and varenicline, have been shown to be less effective in women. Fluctuations in ovarian hormones across the menstrual cycle can affect craving and smoking relapse propensity. In addition, many women who smoke use some form of oral contraceptives, which most often contain ethinyl estradiol (EE), a synthetic, orally bio-available estrogen that is currently prescribed to women chronically and has been shown to alter smoking reward in women. The current study examined the impact of 17β-estradiol (E2), the prominent endogenous form of the steroid hormone estrogen, as well as EE, on nicotine self-administration, demand, and reinstatement following ovariectomy (OVX) or sham surgery. OVX vehicle-treated female rats consumed less nicotine, had lower intensity of demand, and reinstated less compared to sham vehicle-treated female rats. OVX-E2 and OVX-EE treatment groups showed a rebound of nicotine intake later in training, and Q₀ levels of consumption were partially rescued in both groups. Further, E2 but not EE reversed the abolishment of reinstated nicotine seeking induced by OVX. Taken together, these results demonstrate that natural and synthetic estrogens play a critical role in mediating the neurobehavioral effects of nicotine, and future studies are essential for our understanding of how synthetic hormones contained within oral contraceptives interact with smoking.

Zero-order drug delivery: State of the art and future prospects

Pharmaceutical drugs are an important part of the global healthcare system, with some estimates suggesting over 50% of the world's population takes at least one medication per day. Most drugs are delivered as immediate-release formulations that lead to a rapid increase in systemic drug concentration. Although these formulations have historically played an important role, they can be limited by poor patient compliance, adverse side effects, low bioavailability, or undesirable pharmacokinetics. Drug delivery systems featuring first-order release kinetics have been able to improve pharmacokinetics but are not ideal for drugs with short biological half-lives or small therapeutic windows. Zero-order drug delivery systems have the potential to overcome the issues facing immediate-release and first-order systems by releasing drug at a constant rate, thereby maintaining drug concentrations within the therapeutic window for an extended period of time. This release profile can be used to limit adverse side effects, reduce dosing frequency, and potentially improve patient compliance. This review covers strategies being employed to attain zero-order release or alter traditionally first-order release kinetics to achieve more consistent release before discussing opportunities for improving device performance based on emerging materials and fabrication methods.

Designing Biodegradable Wafers Based on Poly(L-lactide-co-glycolide) and Poly(glycolide-co-ε-caprolactone) for the Prolonged and Local Release of Idarubicin for the Therapy of Glioblastoma Multiforme

PURPOSE

The blood-brain barrier limits the application of idarubicin in the therapy of glioblastoma multiforme. Biodegradable, intracranial wafers with prolonged release may increase therapy efficiency.

METHODS

Blank wafers, wafers containing 5% w/w and 10% w/w of idarubicin were formulated by solution casting from poly(L-lactide-co-glycolide) and poly(glycolide-co-ε-caprolactone). The following methods were used: NMR, GPC, DSC, FTIR, AFM, UV-VIS, and a viability and proliferation assay for idarubicin action (U87MG cell line).

RESULTS

Wafers showed a surface with numerous immersions and hills. A lack of interactions between idarubicin and the copolymers was observed. The substance was entrapped in the matrix and released in two phases for all wafers with the appropriate bolus and maintenance dose. The burst effect was observed for all wafers, however, the biggest bolus for poly(L-lactide-co-glycolide) wafers containing 5% w/w of idarubicin was noted. The stable and steady degradation of poly(glycolide-co-ε-caprolactone) wafers containing 5% w/w of idarubicin ensures the most optimal release profile and high inhibition of proliferation.

CONCLUSIONS

Copolymer wafers with idarubicin are an interesting proposition with great potential for the local treatment of glioblastoma multiforme. The release rate and dose may be regulated by the amount and kind of wafers for various effects.

PLGA-BMP-2 and PLA-17β-Estradiol Microspheres Reinforcing a Composite Hydrogel for Bone Regeneration in Osteoporosis

The controlled release of active substances-bone morphogenetic protein 2 (BMP-2) and 17β-estradiol-is one of the main aspects to be taken into account to successfully regenerate a tissue defect. In this study, BMP-2- and 17β-estradiol-loaded microspheres were combined in a sandwich-like system formed by a hydrogel core composed of chitosan (CHT) collagen, 2-hidroxipropil γ-ciclodextrin (HP-γ-CD), nanoparticles of hydroxyapatite (nano-HAP), and an electrospun mesh shell prepared with two external electrospinning films for the regeneration of a critical bone defect in osteoporotic rats. Microspheres were made with poly-lactide-co-glycolide (PLGA) to encapsulate BMP-2, whereas the different formulations of 17β-estradiol were prepared with poly-lactic acid (PLA) and PLGA. The in vitro and in vivo BMP-2 delivered from the system fitted a biphasic profile. Although the in vivo burst effect was higher than in vitro the second phases (lasted up to 6 weeks) were parallel, the release rate ranged between 55 and 70 ng/day. The in vitro release kinetics of the 17β-estradiol dissolved in the polymeric matrix of the microspheres depended on the partition coefficient. The 17β-estradiol was slowly released from the core system using an aqueous release medium (Deff = 5.58·10-16 ± 9.81·10-17m2s-1) and very fast in MeOH-water (50:50). The hydrogel core system was injectable, and approximately 83% of the loaded dose is uniformly discharged through a 20G needle. The system placed in the defect was easily adapted to the defect shape and after 12 weeks approximately 50% of the defect was refilled by new tissue. None differences were observed between the osteoporotic and non-osteoporotic groups. Despite the role of 17β-estradiol on the bone remodeling process, the obtained results in this study suggest that the observed regeneration was only due to the controlled rate released of BMP-2 from the PLGA microspheres.

Biodegradable Shape Memory Polymers in Medicine

Shape memory materials have emerged as an important class of materials in medicine due to their ability to change shape in response to a specific stimulus, enabling the simplification of medical procedures, use of minimally invasive techniques, and access to new treatment modalities. Shape memory polymers, in particular, are well suited for such applications given their excellent shape memory performance, tunable materials properties, minimal toxicity, and potential for biodegradation and resorption. This review provides an overview of biodegradable shape memory polymers that have been used in medical applications. The majority of biodegradable shape memory polymers are based on thermally responsive polyesters or polymers that contain hydrolyzable ester linkages. These materials have been targeted for use in applications pertaining to embolization, drug delivery, stents, tissue engineering, and wound closure. The development of biodegradable shape memory polymers with unique properties or responsiveness to novel stimuli has the potential to facilitate the optimization and development of new medical applications.

Research on a Nonwoven Fabric Made from Multi-Block Biodegradable Copolymer Based on l-Lactide, Glycolide, and Trimethylene Carbonate with Shape Memory

The presented paper concerns scientific research on processing a poly(lactide-co-glycolide-co-trimethylene carbonate) copolymer (PLLAGLTMC) with thermally induced shape memory and a transition temperature around human body temperature. The material in the literature called terpolymer was used to produce smart, nonwoven fabric with the melt blowing technique. Bioresorbable and biocompatible terpolymers with shape memory have been investigated for its medical applications, such as cardiovascular stents. There are several research studies on shape memory in polymers, but this phenomenon has not been widely studied in textile products made from shape memory polymers (SMPs). The current research aims to explore the characteristics of the PLLAGLTMC nonwoven fabric in detail and the mechanism of its shape memory behavior. In this study, the nonwoven fabric was subjected to thermo-mechanical, morphological, and shape memory analysis. The thermo-mechanical and structural properties were investigated by means of differential scanning calorimetry, dynamic mechanical analysis, scanning electron microscopic examination, and mercury porosimetry measurements. Eventually, the gathered results confirmed that the nonwoven fabric possessed characteristics that classified it as a smart material with potential applications in medicine.