Selective Oxidation Catalysis: Opportunities and Challenges

A Mechanistic Investigation of the N-Hydroxyphthalimide Catalyzed Benzylic Oxidation Mediated by Sodium Chlorite

A detailed investigation into the mechanistic course of N-hydroxyphthalimide catalyzed oxidation of benzylic centers using sodium chlorite as the stoichiometric oxidant is reported. Through a combination of experimental, spectroscopic, and computational techniques, the transformation is interrogated, providing improved reaction conditions and an enhanced understanding of the mechanism. Performing the transformation in the presence of acetic acid or a pH 4.5 buffer leads to extended reaction times but improves the catalyst lifetime, leading to the complete consumption of the starting material. Chlorine dioxide is identified as the active oxidant that is able to oxidize the N-hydroxyphthalimide anion to the phthalimide-N-oxyl radical, the proposed catalytically active species, which is able to abstract a hydrogen atom from the substrate. A second molecule of chlorine dioxide reacts with the resultant radical and, after loss of hypochlorous acid, leads to the observed product. Through a broad variety of techniques including UV/vis, EPR and Raman spectroscopy, isotopic labeling, and the use of radical traps, evidence for the mechanism is presented that is supported through electronic structural calculations.

Concerted oxygen diffusion across heterogeneous oxide interfaces for intensified propane dehydrogenation

Propane dehydrogenation (PDH) is an industrial technology for direct propylene production which has received extensive attention in recent years. Nevertheless, existing non-oxidative dehydrogenation technologies still suffer from the thermodynamic equilibrium limitations and severe coking. Here, we develop the intensified propane dehydrogenation to propylene by the chemical looping engineering on nanoscale core-shell redox catalysts. The core-shell redox catalyst combines dehydrogenation catalyst and solid oxygen carrier at one particle, preferably compose of two to three atomic layer-type vanadia coating ceria nanodomains. The highest 93.5% propylene selectivity is obtained, sustaining 43.6% propylene yield under 300 long-term dehydrogenation-oxidation cycles, which outperforms an analog of industrially relevant K-CrO_x/Al₂O₃ catalysts and exhibits 45% energy savings in the scale-up of chemical looping scheme. Combining in situ spectroscopies, kinetics, and theoretical calculation, an intrinsically dynamic lattice oxygen "donator-acceptor" process is proposed that O^2- generated from the ceria oxygen carrier is boosted to diffuse and transfer to vanadia dehydrogenation sites via a concerted hopping pathway at the interface, stabilizing surface vanadia with moderate oxygen coverage at pseudo steady state for selective dehydrogenation without significant overoxidation or cracking.

Facile Ozonation of Light Alkanes to Oxygenates with High Atom Economy in Tunable Condensed Phase at Ambient Temperature

We have demonstrated the oxidation of mixed alkanes (propane, n-butane, and isobutane) by ozone in a condensed phase at ambient temperature and mild pressures (up to 1.3 MPa). Oxygenated products such as alcohols and ketones are formed with a combined molar selectivity of >90%. The ozone and dioxygen partial pressures are controlled such that the gas phase is always outside the flammability envelope. Because the alkane-ozone reaction predominantly occurs in the condensed phase, we are able to harness the unique tunability of ozone concentrations in hydrocarbon-rich liquid phases for facile activation of the light alkanes while also avoiding over-oxidation of the products. Further, adding isobutane and water to the mixed alkane feed significantly enhances ozone utilization and the oxygenate yields. The ability to tune the composition of the condensed media by incorporating liquid additives to direct selectivity is a key to achieving high carbon atom economy, which cannot be achieved in gas-phase ozonations. Even in the liquid phase, without added isobutane and water, combustion products dominate during neat propane ozonation, with CO₂ selectivity being >60%. In contrast, ozonation of a propane+isobutane+water mixture suppresses CO₂ formation to 15% and nearly doubles the yield of isopropanol. A kinetic model based on the formation of a hydrotrioxide intermediate can adequately explain the yields of the observed isobutane ozonation products. Estimated rate constants for the formation of oxygenates suggest that the demonstrated concept has promise for facile and atom-economic conversion of natural gas liquids to valuable oxygenates and broader applications associated with C-H functionalization.

Selenous Acid in an Aromatic Framework: Insights Into a Temperature-Sensitive Internal Redox System from the Solid State

We report on a new compound composed of a phenanthroline network in which emerging channels are alternately occupied by selenous acid (H₂SeO₃) and dioxane molecules. The material undergoes a variety of structural changes due to both its redox activity as well as its thermal decomposition. We investigate an internal redox system of the incorporated selenous acid and the aldehyde groups of the phenanthroline framework. The reduction process of the selenium species was further elucidated by cyclic voltammetry, while the oxidation process was also monitored by ¹H NMR spectra. The thermal behavior reveals that the material can undergo a reversible, topotactic transition due to dioxane and water (de)intercalation.

Transition-Metal-Doping of CaO as Catalyst for the OCM Reaction, a Reality Check

In this study, first-row transition metal-doped calcium oxide materials (Mn, Ni, Cr, Co., and Zn) were synthesized, characterized, and tested for the OCM reaction. Doped carbonate precursors were prepared by a co-precipitation method. The synthesis parameters were optimized to yield materials with a pure calcite phase, which was verified by XRD. EPR measurements on the doped CaO materials indicate a successful substitution of Ca2+ with transition metal ions in the CaO lattice. The materials were tested for their performance in the OCM reaction, where a beneficial effect towards selectivity and activity effect could be observed for Mn, Ni, and Zn-doped samples, where the selectivity of Co- and Cr-doped CaO was strongly reduced. The optimum doping concentration could be identified in the range of 0.04-0.10 atom%, showing the strongest decrease in the apparent activation energy, as well as the maximum increase in selectivity.

Light-mediated aerobic oxidation of C(sp3)–H bonds by a Ce(iv) hexachloride complex

A photochemical C(sp3)–H oxygenation of arene and alkane substrates (including methane) catalyzed by [NEt4]2[CeIVCl6] under mild conditions (1 atm, 25 °C) is described.

Engineering of Single Atomic Cu-N3 Active Sites for Efficient Singlet Oxygen Production in Photocatalysis

Photocatalytic generation of singlet oxygen (¹O₂) is an attractive strategy to convert organic chemicals to high value-added products. However, the scarcity of suitable active sites in photocatalysts commonly leads to the poor adsorption and activation of oxygen molecules from a triplet state to a singlet state. Here, we report single atomic Cu-N₃ sites on tubular g-C₃N₄ for the production of singlet oxygen. X-ray absorption fine spectroscopy, in combination with high-resolution electron microscopy techniques, determines the existence of atomically dispersed Cu sites with Cu-N₃ coordination mode. The combined analysis of electron spin resonance and time-resolved optical spectra confirmed that a single atomic Cu-N₃ structure facilitates a high concentration of ¹O₂ generation due to charge transport, electron-hole interaction, and exciton effect. Benefiting from the merits, a single atomic photocatalyst yields nearly 100% conversion and selectivity from thioanisole to sulfoxide within 2.5 h under visible light irradiation. This work deeply reveals the design and construction of catalysts with specific active sites, which are helpful to improve the activation efficiency of oxygen.

Substrate–Solvent Crosstalk—Effects on Reaction Kinetics and Product Selectivity in Olefin Oxidation Catalysis

In this work, we explored how solvents can affect olefin oxidation reactions catalyzed by MCM-bpy-Mo catalysts and whether their control can be made with those players. The results of this study demonstrated that polar and apolar aprotic solvents modulated the reactions in different ways. Experimental data showed that acetonitrile (aprotic polar) could largely hinder the reaction rate, whereas toluene (aprotic apolar) did not. In both cases, product selectivity at isoconversion was not affected. Further insights were obtained by means of neutron diffraction experiments, which confirmed the kinetic data and allowed for the proposal of a model based on substrate–solvent crosstalk by means of hydrogen bonding. In addition, the model was also validated in the ring-opening reaction (overoxidation) of styrene oxide to benzaldehyde, which progressed when toluene was the solvent (reaching 31% styrene oxide conversion) but was strongly hindered when acetonitrile was used instead (reaching only 7% conversion) due to the establishment of H-bonds in the latter. Although this model was confirmed and validated for olefin oxidation reactions, it can be envisaged that it may also be applied to other catalytic reaction systems where reaction control is critical, thereby widening its use.

Ag2 S-CdS p-n Nanojunction-Enhanced Photocatalytic Oxidation of Alcohols to Aldehydes

Selective oxidation of alcohols to aldehydes under mild conditions is important for the synthesis of high-value-added organic intermediates but still very challenging. For most of the thermal and photocatalytic systems, noble metal catalysts or harsh reaction conditions are required. Herein, the synthesis and use of Ag₂ S-CdS p-n nanojunctions as an efficient photocatalyst for selective oxidation of a series of aromatic alcohols to their corresponding aldehydes is reported. High quantum efficiencies (59.6% and 36.9% under 380 and 420 nm, respectively) are achieved in air atmosphere at room temperature. Photoluminescence and photo-electrochemical tests show that the excellent performance is mainly due to the p-n junction-enhanced charge separation and transfer for the activation of both O₂ (in air) and substrates. This study demonstrates the potential of p-n junction in photocatalytic synthesis under mild conditions.

Organic Salts and Merrifield Resin Supported [PM12O40]3- (M = Mo or W) as Catalysts for Adipic Acid Synthesis

Adipic acid (AA) was obtained by catalyzed oxidation of cyclohexene, epoxycyclohexane, or cyclohexanediol under organic solvent-free conditions using aqueous hydrogen peroxide (30%) as an oxidizing agent and molybdenum- or tungsten-based Keggin polyoxometalates (POMs) surrounded by organic cations or ionically supported on functionalized Merrifield resins. Operating under these environmentally friendly, greener conditions and with low catalyst loading (0.025% for the molecular salts and 0.001–0.007% for the supported POMs), AA could be produced in interesting yields.

Surface organometallic chemistry in heterogeneous catalysis

Surface organometallic chemistry has been reviewed with a special focus on environmentally relevant transformations (C–H activation, CO₂conversion, oxidation).

Sixteen isostructural phosphonate metal-organic frameworks with controlled Lewis acidity and chemical stability for asymmetric catalysis

Heterogeneous catalysts typically lack the specific steric control and rational electronic tuning required for precise asymmetric catalysis. Here we demonstrate that a phosphonate metal–organic framework (MOF) platform that is robust enough to accommodate up to 16 different metal clusters, allowing for systematic tuning of Lewis acidity, catalytic activity and enantioselectivity. A total of 16 chiral porous MOFs, with the framework formula [M₃L₂(solvent)₂] that have the same channel structures but different surface-isolated Lewis acid metal sites, are prepared from a single phosphono-carboxylate ligand of 1,1′-biphenol and 16 different metal ions. The phosphonate MOFs possessing tert-butyl-coated channels exhibited high thermal stability and good tolerances to boiling water, weak acid and base. The MOFs provide a versatile family of heterogeneous catalysts for asymmetric allylboration, propargylation, Friedel–Crafts alkylation and sulfoxidation with good to high enantioselectivity. In contrast, the homogeneous catalyst systems cannot catalyze the test reactions enantioselectively.

Asymmetric synthesis predominantly falls within the realm of homogeneous catalysis. Here, the authors synthesized 16 chiral metal–organic frameworks differing in the nature of the transition metal and demonstrate their excellent stability, catalytic activity and recyclability in a number of enantioselective reactions.

The cumene/O2 system: a very simple tool for the radical chain oxidation of some functional groups

Due to the relative stability of the cumyl radical, cumenes and α-methyl-styrenes are ideally structured to directly harvest the oxidizing reactivity of O2 and initiate radical chain reactions in catalyst-free conditions. In the absence of additional substrates, these processes can lead to acetophenones. In the presence of substrates, the cumene oxidation process can be intercepted in various chain reactions, affording very simple protocols for functional group oxidation.

Photooxygenation of alkanes by dioxygen with p-benzoquinone derivatives with high quantum yields

Alkanes were oxygenated by dioxygen with p-xyloquinone in cyclohexane which is used as a solvent to yield the corresponding oxygenated products under visible light photoirradiation with high quantum yields higher than 1000%.

p-Tolylimido rhenium(v) complexes with phenolate-based ligands: synthesis, X-ray studies and catalytic activity in oxidation with tert-butylhydroperoxide

The reactions of mer-[Re(p-NTol)X₃(PPh₃)₂] with phenolate-based ligands gave 16 new rhenium(v) complexes. Only a few of them exhibited high catalytic activity.

Chemical Plausibility of Cu(III) with Biological Ligation in pMMO

The mechanisms of dioxygen activation and methane C-H oxidation in particulate methane monooxygenase (pMMO) are currently unknown. Recent studies support a binuclear copper site as the catalytic center. We report the low-temperature assembly of a high-valent dicopper(III) bis(μ-oxide) complex bearing marked structural fidelity to the proposed active site of pMMO. This unprecedented dioxygen-bonded Cu(III) species with exclusive biological ligation directly informs on the chemical plausibility and thermodynamic stability of the bis(μ-oxide) structure in such dicopper sites and foretells unusual optical signatures of an oxygenation product in pMMO. Though the ultimate pMMO active oxidant is still debated, C-H oxidation of exogenous substrates is observed with the reported Cu(III) complexes. The assembly of a high valent species both narrows the search for relevant pMMO intermediates and provides evidence to substantiate the role of Cu(III) in biological redox processes.

A combined experimental and computational investigation on the unusual molecular mechanism of the Lossen rearrangement reaction activated by carcinogenic halogenated quinones

The classic Lossen rearrangement is a well-known reaction describing the transformation of an O-activated hydroxamic acid into the corresponding isocyanate. In this study, we found that chlorinated benzoquinones (CnBQ) serve as a new class of agents for the activation of benzohydroxamic acid (BHA), leading to Lossen rearrangement. Compared to the classic one, this new kind of CnBQ-activated Lossen rearrangement has the following unique characteristics: (1) The stability of CnBQ-activated BHA intermediates was found to depend not only on the degree but also on the position of Cl-substitution on CnBQs, which can be divided into two subgroups. (2) It is the relative energy of the anionic CnBQ-BHA intermediates that determine the rate of this CnBQ-activated rearrangement, which is the rate-limiting step, and the Cl or H ortho to the reaction site at CnBQ is crucial for the stability of the anionic intermediates. (3) A pKa-activation energy correlation was observed, which can explain why the correlation exists between the rate of the rearrangement and the acidity of the conjugate acid of the anionic leaving group, the hydroxlated quinones. These findings may have broad implications for future research on halogenated quinoid carcinogens and hydroxamate biomedical agents.

Selective Palladium-Catalysed Aerobic Oxidation of Alcohols

Palladium has a significant track record as a catalyst for a range of oxidation reactions and it has been explored for the selective oxidation of alcohols for many years. This chapter focuses on the two main types of aerobic Pd catalysts: heterogeneous and ligand-modulated systems. In the case of heterogeneous systems, the mechanistic understanding of these systems and the use of in situ and operando techniques to obtain this knowledge are discussed. The current state-of-the-art is also summarized in terms of catalytic performance and substrate scope for heterogeneous Pd-based catalysts. In terms of ligand-modulated systems, leading examples of molecular Pd(ii) catalysts which undergo direct O2 coupled turnover are highlighted. The catalyst performance for such catalysts is exemplified and mechanistic understanding for these molecular systems is discussed.

Catalytic oxygen activation versus autoxidation for industrial applications: a physicochemical approach

The activation and use of oxygen for the oxidation and functionalization of organic substrates are among the most important reactions in a chemist's toolbox. Nevertheless, despite the vast literature on catalytic oxidation, the phenomenon of autoxidation, an ever-present background reaction that occurs in virtually every oxidation process, is often neglected. In contrast, autoxidation can affect the selectivity to a desired product, to those dictated by pure free-radical chain pathways, thus affecting the activity of any catalyst used to carry out a reaction. This critical review compares catalytic oxidation routes by transition metals versus autoxidation, particularly focusing on the industrial context, where highly selective and "green" processes are needed. Furthermore, the application of useful tests to discriminate between different oxygen activation routes, especially in the area of hydrocarbon oxidation, with the aim of an enhanced catalyst design, is described and discussed. In fact, one of the major targets of selective oxidation is the use of molecular oxygen as the ultimate oxidant, combined with the development of catalysts capable of performing the catalytic cycle in a real energy and cost effective manner on a large scale. To achieve this goal, insights from metallo-proteins that could find application in some areas of industrial catalysis are presented, as well as considering the physicochemical principles that are fundamental to oxidation and autoxidation processes.

Catalysing sustainable fuel and chemical synthesis

Concerns over the economics of proven fossil fuel reserves, in concert with government and public acceptance of the anthropogenic origin of rising CO2 emissions and associated climate change from such combustible carbon, are driving academic and commercial research into new sustainable routes to fuel and chemicals. The quest for such sustainable resources to meet the demands of a rapidly rising global population represents one of this century's grand challenges. Here, we discuss catalytic solutions to the clean synthesis of biodiesel, the most readily implemented and low cost, alternative source of transportation fuels, and oxygenated organic molecules for the manufacture of fine and speciality chemicals to meet future societal demands.

Bi2WO6: A highly chemoselective visible light photocatalyst toward aerobic oxidation of benzylic alcohols in water

The visible-light-driven flower-like Bi₂WO₆ photocatalyst toward “green” chemistry oriented selective organic transformations in water is an essential pathway to sustainable development.

Mesostructural Bi-Mo-O catalyst: correct structure leading to high performance

Structure-activity relationship has been one of the main topics of research on catalysts all the time. Component and structure are the two moieties governing the performance of solid materials as catalysts. Multicomponent bismuth molybdates are well known catalysts for propene oxidation but pure crystalline phases of bismuth molybdate are inactive for the reaction. We have designed mesostructural Bi-Mo-O catalyst with pure bismuth molybdate nanocrystals attached to molybdenum oxide nanobelts and found it is a high performance catalyst for the reaction, though the two domains themselves are inactive. The strongly expitaxial interaction between the two domains causes the lattice shrinkage and distortion of the bismuth molybdate nanocrystals and extremely promotes their catalytic activity toward propene oxidation while keeping high selectivity at the same time. The results are instructive for design of nano oxide catalysts with mesostructures leading to high performance.