Metal Free Graphene Based Catalysts: A Review

Synthesis of rGO/CuBi2O4 nanocomposite as an effective photocatalyst in the reduction of nitroaromatic compounds to corresponding amines under visible light

BACKGROUND

Chemical pollutants, such as nitroaromatic compounds, have been a significant challenge in recent decades of human societies as they contribute to environmental pollution and pose serious health risks due to their high toxicity. One promising and green method to address this issue is the photocatalytic reduction of nitroaromatic compounds to their corresponding amino aromatic compounds. In this study, an rGO/CuBi2O4 nanocomposite was synthesized using the hydrothermal method, involving the simultaneous reduction of graphene oxide and the coupling of CuBi2O4 nanoparticles in its layers. The resulting heterogeneous structure was characterized using various techniques including FTIR, Raman, XPS, XRD, FESEM, TEM, EDAX, UV–Vis DRS, BET, PL spectroscopy, and EIS. Subsequently, the photocatalytic efficiency of the nanocomposite in reducing nitroaromatic compounds to the corresponding aromatic amines under visible light was evaluated.

RESULTS

The results indicated that graphene oxide was effectively reduced and coupled with CuBi2O4 nanoparticles in the reduced graphene oxide sheets. The rGO/CuBi2O4 heterogeneous nanocomposite successfully reduced nitroaromatic compounds to the corresponding aromatic amines under visible light. Hydrazine monohydrate was used to supply the necessary hydrogen for the reaction.

CONCLUSION

This study confirmed the high photocatalytic activity of the rGO/CuBi2O4 heterogeneous nanocomposite. Our nanocomposite was more effective than others, reported in similar studies, at reducing nitroaromatic compounds to the corresponding amino aromatic compounds. Additionally, it demonstrated high recycling and reuse properties, as there was no significant change in reaction conversion percentage and nanocomposite amount after 16 reuses. © 2024 Society of Chemical Industry (SCI).

Recyclable GO-Arginine Hybrids for CO2 Fixation into Cyclic Carbonates

New covalently modified GO-guanidine materials have been realized in a gram-scale synthesis and purified by an innovative microfiltration. The use of these composites in the fixation of CO₂ into cyclic carbonates is demonstrated. Mild operating conditions, high yields (up to 85 %), wide scope (15 examples) and recoverability/reusability (up to 5 cycles) of the material account for the efficiency of the protocol. Dedicated control experiments shed light on the activation modes exerted by GO-l-arginine during the ring-opening/closing synthetic sequence.

Enhanced ultraviolet-visible photocatalysis of RGO/equaixial geometry TiO2 composites on degradation of organic dyes in water

The reduced graphene oxide dopped equaixial geometry TiO₂ (rGO/egTiO₂) composite as photocatalyst was synthesized hydrothermally with various mass ratios of tetrabutyl titanate. The photocatalyst is considered to be rGO/equaixial geometry TiO₂ in terms of modifying the combined reduced graphene Oxide and TiO₂. The rGO plays a vital role in rGO/egTiO₂ composite as photocatalysts were analyzed in methylene blue (MB) and rhodamine B (RhB) photocatalytic degradation under UV and simulated solar light irradiation. This synthesized catalyst was characterized by various analytical techniques such as XPS, XRD, SEM, BET, and TEM. The rGO/egTiO₂ composite exhibits enhanced photocatalytic performance with degradation rates of 97.5 and 97% on RhB and MB for 60 min under UV radiation respectively, while the degradation rate of 94 and 92 % was observed on the same dyes for 6 h under the simulated sunlight radiation. The enhanced photocatalytic performance of the rGO/egTiO₂ composite under ultraviolet irradiation source was owing to a high separation efficiency of the photo-induced electron-hole pairs, while the photocatalytic performance under simulated sunlight radiation was due to the photosensitive and charge separator behavior of rGO. This offers us an excellent potential of significant photocatalytic activity for the removal of organic contaminants from wastewater.

Anthracene modified graphene for C60/C70 fullerenes capture and construction of energy storage materials

Graphene functionalized with dianthracene malonate was synthesized and used subsequently for construction of covalently bound graphene-fullerene hybrid nanomaterials. For this purpose, novel approach of Diels–Alder reaction of C60/C70 fullerene cores with anthracene moieties previously introduced onto graphene surface was successfully employed. Structure and composition of obtained graphene and its derivatives were characterized using scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and FT-IR spectroscopy. Obtained results revealed that both C60 and C70 fullerenes were found to be capable of formation desired Diels–Alder adducts, yielding products of different morphology. Capacitive properties of the synthesized energy storage nanomaterials were determined by means of cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) measurements, revealing that functionalization of graphene with C60 moieties enhances its energy storage properties.

Rational Design of Graphene Derivatives for Electrochemical Reduction of Nitrogen to Ammonia

The conversion of nitrogen to ammonia offers a sustainable and environmentally friendly approach for producing precursors for fertilizers and efficient energy carriers. Owing to the large energy density and significant gravimetric hydrogen content, NH₃ is considered an apt next-generation energy carrier and liquid fuel. However, the low conversion efficiency and slow production of ammonia through the nitrogen reduction reaction (NRR) are currently bottlenecks, making it an unviable alternative to the traditional Haber-Bosch process for ammonia production. The rational design and engineering of catalysts (both photo- and electro-) represent a crucial challenge for improving the efficiency and exploiting the full capability of the NRR. In the present review, we highlight recent progress in the development of graphene-based systems and graphene derivatives as catalysts for the NRR. Initially, the history, fundamental mechanism, and importance of the NRR to produce ammonia are briefly discussed. We also outline how surface functionalization, defects, and hybrid structures (single-atom/multiatom as well as composites) affect the N₂ conversion efficiency. The potential of graphene and graphene derivatives as NRR catalysts is highlighted using pertinent examples from theoretical simulations as well as machine learning based performance predictive methods. The review is concluded by identifying the crucial advantages, drawbacks, and challenges associated with principal scientific and technological breakthroughs in ambient catalytic NRR.

Recent advances in metal-free heteroatom-doped carbon heterogonous catalysts

The development of cost-effective, efficient, and novel catalytic systems is always an important topic for heterogeneous catalysis from academia and industrial points of view. Heteroatom-doped carbon materials have gained more and more attention as effective heterogeneous catalysts to replace metal-based catalysts, because of their excellent physicochemical properties, outstanding structure characteristics, environmental compatibility, low cost, inexhaustible resources, and low energy consumption. Doping of heteroatoms can tailor the properties of carbons for different utilizations of interest. In comparison to pure carbon catalysts, these catalysts demonstrate superior catalytic activity in many organic reactions. This review highlights the most recent progress in synthetic strategies to fabricate metal-free heteroatom-doped carbon catalysts including single and multiple heteroatom-doped carbons and the catalytic applications of these fascinating materials in various organic transformations such as oxidation, hydrogenation, hydrochlorination, dehydrogenation, etc.

State-of-the-art developments in carbon-based metal nanocomposites as a catalyst: photocatalysis

The rapid progress of state-of-the-art carbon-based metals as a catalyst is playing a central role in the research area of chemical and materials engineering for effective visible-light-induced catalytic applications. Numerous admirable catalysts have been fabricated, but significant challenges persist to lower the cost and increase the action of catalysts. The development of carbon-based nanostructured materials (i.e., activated carbon, carbon nitride, graphite, fullerenes, carbon nanotubes, diamond, graphene, etc.) represents an admirable substitute to out-of-date catalysts. Significant efforts have been made by researchers toward the improvement of various carbon-based metal nanostructures as catalysts. Moreover, incredible development has been achieved in several fields of catalysis, such as visible-light-induced catalysis, electrochemical performance, energy storage, and conversion, etc. This review gives an overview of the up-to-date developments in the strategy of design and fabrication of carbon-based metal nanostructures as photo-catalysts by means of several methods within the green approach, including chemical synthesis, in situ growth, solution mixing, and hydrothermal approaches. Moreover, the photocatalytic effects of the resulting carbon-based nanostructure classifications are similarly deliberated relative to their eco-friendly applications, such as photocatalytic degradation of organic dye pollutants.

Transition Metal-Free Synthesis of Carbamates Using CO2 as the Carbon Source

Utilization of carbon dioxide as a C1 synthon is highly attractive for the synthesis of valuable chemicals. However, activation of CO₂ is highly challenging, owing to its thermodynamic stability and kinetic inertness. With this in mind, several strategies have been developed for the generation of carbon-heteroatom bonds. Among these, formation of C-N bonds is highly attractive, especially, when carbamates can be synthesized directly from CO₂ . This Minireview focuses on transition metal-free approaches for the fixation of CO₂ to generate carbamates for the production of fine chemicals and pharmaceuticals. Within the past decade, transition metal-free approaches have gained increasing attention, but traditional reviews have rarely focused on these approaches. Direct comparisons between such methods have been even more scarce. This Minireview seeks to address this discrepancy.

Metal-free C-H Activation over Graphene Oxide toward Direct Syntheses of Structurally Different Amines and Amides in Water

Unprecedented metal-free synthesis of a variety of amines and amides is reported via amination of C(sp³)-H and C(sp²)-H bonds. The strategy involves graphene-oxide/I₂-catalyzed nitrene insertion using PhINTs as a nitrene (NT) source in water at room temperature. A wide range of structurally different substrates, viz., cyclohexane, cyclic ethers, arenes, alkyl aromatic systems, and aldehydes/ketones, having an α-phenyl ring have been employed successfully to afford the corresponding nitrene insertion product in good yield, albeit low in few cases. The envisaged method has superiority over others in terms of its operational simplicity, metal-free catalysis, use of water as a solvent, ambient reaction conditions, and reusability of the catalyst.

Graphene Oxide as a Mediator in Organic Synthesis: a Mechanistic Focus

Graphene oxide (GO) is experiencing growing interest by synthetic organic chemists as a promoter of chemical transformations. The synergistic role of the multiple functionalities featuring the nanostructured carbon materials and their π-domains enables the interplay of specific activation modes towards organic compounds that can explore unprecedented chemical modifications. A detailed comprehension of the mechanistic details that govern the transformations guided by GO is a not fully solved task in the field. In this direction, more sophisticated and diversified techniques are employed, providing insights towards intriguing activation modes exerted by the π-matrix and the oxygenated/sulfonate groups decorating the functionalized nano-carbon material. The present Minireview accounts for a critical survey of the most recent developments in the area of GO-mediated organic transformations with a specific focus on mechanist aspects.

Allylic and Allenylic Dearomatization of Indoles Promoted by Graphene Oxide by Covalent Grafting Activation Mode

The site-selective allylative and allenylative dearomatization of indoles with alcohols was performed under carbocatalytic regime in the presence of graphene oxide (GO, 10 wt % loading) as the promoter. Metal-free conditions, absence of stoichiometric additive, environmentally friendly conditions (H₂ O/CH₃ CN, 55 °C, 6 h), broad substrate scope (33 examples, yield up to 92 %) and excellent site- and stereoselectivity characterize the present methodology. Moreover, a covalent activation model exerted by GO functionalities was corroborated by spectroscopic, experimental and computational evidences. Recovering and regeneration of the GO catalyst through simple acidic treatment was also documented.

Graphene-based carbocatalysts for carbon-carbon bond formation

Organic transformations are usually catalyzed by metal-based catalysts. In contrast, metal-free catalysts have attracted considerable attention from the viewpoint of sustainability and safety. Among the studies in metal-free catalysis, graphene-based materials have been introduced in the reactions that are usually catalyzed by transition metal catalysts. This review covers the literature (up to the beginning of April 2020) on the use of graphene and its derivatives as carbocatalysts for C-C bond-forming reactions, which are one of the fundamental reactions in organic syntheses. Besides, mechanistic studies are included for the rational understanding of the catalysis. Graphene has significant potential in the field of metal-free catalysis because of the fine-tunable potential of the structure, high stability and durability, and no metal contamination, making it a next-generation candidate material in catalysis.

Microwave-Assisted Synthesis of ZnO-rGO Core-Shell Nanorod Hybrids with Photo- and Electro-Catalytic Activity

The unique two-dimensional structure and surface chemistry of reduced graphene oxide (rGO) along with its high electrical conductivity can be exploited to modify the electrochemical properties of ZnO nanoparticles (NPs). ZnO-rGO nanohybrids can be engineered in a simple new two-step synthesis, which is both fast and energy-efficient. The resulting hybrid materials show excellent electrocatalytic and photocatalytic activity. The structure and composition of the as-prepared bare ZnO nanorods (NRs) and the ZnO-rGO hybrids have been extensively characterised and the optical properties subsequently studied by UV/Vis spectroscopy and photoluminescence (PL) spectroscopy (including decay lifetime measurements). The photocatalytic degradation of Rhodamine B (RhB) dye is enhanced using the ZnO-rGO hybrids as compared to bare ZnO NRs. Furthermore, potentiometry comparing ZnO and ZnO-rGO electrodes reveals a featureless capacitive background for an Ar-saturated solution whereas for an O₂ -saturated solution a well-defined redox peak was observed using both electrodes. The change in reduction potential and significant increase in current density demonstrates that the hybrid core-shell NRs possess remarkable electrocatalytic activity for the oxygen reduction reaction (ORR) as compared to NRs of ZnO alone.

A Critical Look at Direct Catalytic Hydrogenation of Carbon Dioxide to Olefins

One of the main initiatives for fighting climate change is to use carbon dioxide as a resource instead of waste. In this respect, thermocatalytic carbon dioxide hydrogenation to high-added-value chemicals is a promising process. Among the products of this reaction (alcohols, alkanes, olefins, or aromatics), light olefins are interesting because they are building blocks for making polymers, as well as other important chemicals. Olefins are mainly produced from fossil fuel sources, but the increasing demand of plastics boosts the need to develop more sustainable synthetic routes. This review gives a critical overview of the most recent achievements in direct carbon dioxide hydrogenation to light olefins, which can take place through two competitive routes: the modified Fischer-Tropsch synthesis and methanol-mediated synthesis. Both routes are compared in terms of catalyst development, reaction performance, and reaction mechanisms. Furthermore, practical aspects of the commercialization of this reaction, such as renewable hydrogen production and carbon dioxide capture, compression, and transport, are discussed. It is concluded that, to date, the catalysts used in the carbon dioxide hydrogenation reaction give a wide product distribution, which reduces the specific selectivity to lower olefins. More efforts are needed to reach better control of the C/H surface ratio and interactions within the functionalities of the catalyst, as well as understanding the reaction mechanism and avoiding deactivation. Renewable H₂ production and carbon dioxide capture and transport technologies are being developed, although they are currently still too expensive for industrial application.

CoII immobilized on an aminated magnetic metal–organic framework catalyzed C–N and C–S bond forming reactions: a journey for the mild and efficient synthesis of arylamines and arylsulfides

The catalytic activity of Fe₃O₄@AMCA-MIL53(Al)-NH₂-Co^II NPs as a novel and inexpensive catalyst was investigated in the C–N and C–S cross coupling reactions.

Carbon Materials with Zigzag and Armchair Edges

Carbon materials such as graphene and graphene nanoribbon with zigzag and armchair edges have attracted much attention because of various applications such as electronics, batteries, adsorbents, and catalyst supports. Preparation of carbon materials with different edge structures at a large scale is essential for the future of carbon materials, but it is generally difficult and expensive because of the necessity of organic synthesis on metal substrates. This work demonstrated a simple preparation method of carbon materials with zigzag and armchair edges with/without nonmetallic silica supports from aromatic compounds such as tetracene with zigzag edges and chrysene with armchair edges and also determined the edge structures in detail by three types of analyses such as (1) reactive molecular dynamic simulation with a reactive force field, (2) Raman and infrared (IR) spectra combined with calculation of spectra, and (3) reactivity analyzed by oxidative gasification using thermogravimetric analysis. Two different types of carbon materials with characteristic Raman and IR spectra could be prepared. These carbon materials with different edge structures also clearly showed different tendency in oxidative gasification. This work did not only show the simple preparation method of carbon materials with different edge structures, but also contributes to the development of detailed analyses for carbon materials.

A Metal-Free Carbon-Based Catalyst: An Overview and Directions for Future Research

Metal-free carbon porous materials (CPMs) have gained the intensive attention of scientists and technologists because of their potential applications, ranging from catalysis to energy storage. Various simple and facile strategies are proposed for the preparation of CPMs with well-controlled sizes, shapes, and modifications on the surface. The extraordinary tenability of the pore structure, the environmental acceptability, the unique surface and the corrosion resistance properties allow them to be suitable materials for a large panel of catalysis applications. This review briefly outlines the different signs of progresses made towards synthesizing CPMs, and their properties, including catalytic efficiency, stability, and recyclability. Finally, we make a comparison of their catalytic performances with other nanocomposites, and we provide an outlook on the expected developments in the relevant research works.

Graphene Oxide Promotes Site-Selective Allylic Alkylation of Thiophenes with Alcohols

The graphene oxide (GO) assisted allylic alkylation of thiophenes with alcohols is presented. Mild reaction conditions and a low GO loading enabled the isolation of a range of densely functionalized thienyl and bithienyl compounds in moderate to high yields (up to 90%). The cooperative action of the Brønsted acidity, epoxide moieties, and π-surface of the 2D-promoter is highlighted as crucial in the reaction course of the present Friedel-Crafts-type protocol.

Recent progress of metal-graphene nanostructures in photocatalysis

Metal-graphene nanostructures (NSs) as photocatalysts, prepared using simple and scalable synthesis methods, are gaining heightened attention as novel materials for water treatment and environmental remediation applications. Graphene, the unique few layers sheet-like arrangement of sp2 hybridized carbon atoms, has an inimitable two-dimensional (2D) structure. The material is highly conductive, has high electron mobility and an extremely high surface area, and can be produced on a large scale at low cost. Accordingly, it has been considered as an essential base component for producing various metal-based NSs. In particular, metal-graphene NSs as photocatalysts have attracted considerable attention because of their special surface plasmon resonance (SPR) effect that can improve their performance for the removal of toxic dyes and other pollutants. This review summarizes the recent and advanced progress for the easy fabrication and design of graphene-based NSs as photocatalysts, as a novel tool, using a range of approaches, including green and biogenic approaches.

Synthesis of a molecularly defined single-active site heterogeneous catalyst for selective oxidation of N-heterocycles

Generally, a homogeneous catalyst exhibits good activity and defined active sites but it is difficult to recycle. Meanwhile, a heterogeneous catalyst can easily be reused but its active site is difficult to reveal. It is interesting to bridge the gap between homogeneous and heterogeneous catalysis via controllable construction of a heterogeneous catalyst containing defined active sites. Here, we report that a molecularly defined, single-active site heterogeneous catalyst has been designed and prepared via the oxidative polymerization of maleimide derivatives. These polymaleimide derivatives can be active catalysts for the selective oxidation of heterocyclic compounds to quinoline and indole via the recycling of -C=O and -C-OH groups, which was confirmed by tracing the reaction with GC-MS using maleimide as the catalyst and by FT-IR analysis with polymaleimide as the catalyst. These results might promote the development of heterogeneous catalysts with molecularly defined single active sites exhibiting a comparable activity to homogeneous catalysts.

Design and Fabrication of Highly Reducible PtCo Particles Supported on Graphene-Coated ZnO

Cobalt particles dispersed on an oxide support form the basis of many important heterogeneous catalysts. Strong interactions between cobalt and the support may lead to irreducible cobalt oxide formation, which is detrimental for the catalytic performance. Therefore, several strategies have been proposed to enhance cobalt reducibility, such as alloying with Pt or utilization of nonoxide supports. In this work, we fabricate bimetallic PtCo supported on graphene-coated ZnO with enhanced cobalt reducibility. By employing a model/planar catalyst formulation, we show that the surface reduction of cobalt oxide is substantially enhanced by the presence of the graphene support as compared to bare ZnO. Stimulated by these findings, we synthesized a realistic powder catalyst consisting of PtCo particles grafted on graphene-coated ZnO support. We found that the addition of graphene coating enhances the surface reducibility of cobalt, fully supporting the results obtained on the model system. Our study demonstrates that realistic catalysts with designed properties can be developed on the basis of insights gained from model catalytic formulation.

N/O-doped carbon as a “solid ligand” for nano-Pd catalyzed biphenyl- and triphenylamine syntheses

A series of N/O-doped porous carbon supported nanopalladium catalysts have been successfully prepared, in which the N/O doped carbons were controllably produced via polypyrrole/furan synthesis followed by carbonization.

Carbocatalytic reductive coupling reactions via electron transfer from graphene to aryldiazonium salt

A reductive coupling reaction using two-dimensional nanocarbon, i.e., reduced graphene oxide (rGO), as a carbocatalyst and/or a reaction initiator was developed.

Concurrent Formation of Carbon-Carbon Bonds and Functionalized Graphene by Oxidative Carbon-Hydrogen Coupling Reaction

Oxidative C-H coupling reactions were conducted using graphene oxide (GO) as an oxidant. GO showed high selectivity compared with commonly used oxidants such as (diacetoxyiodo) benzene and 2,3-dichloro-5,6-dicyano-p-benzoquinone. A mechanistic study revealed that radical species contributed to the reaction. After the oxidative coupling reaction, GO was reduced to form a material that shows electron conductivity and high specific capacitance. Therefore, this system could concurrently achieve two important reactions: C-C bond formation via C-H transformation and production of functionalized graphene.

Conjugated polymers with defined chemical structure as model carbon catalysts for nitro reduction

Conjugated polymers with designated oxygen functionalities (–CO) are synthesized as model carbon catalysts, and a plausible catalytic mechanism involving the activation of hydrazine is proposed for nitro reduction reaction.