Biodegradation of Toluene Under Seasonal and Diurnal Fluctuations of Soil-Water Temperature

Effects of short and long-term thermal exposure on microbial compositions in soils contaminated with mixed benzene and benzo[a]pyrene: A short communication

Polycyclic aromatic hydrocarbons (PAHs) and benzene, toluene, ethylbenzene, and xylene (BTEX) are the most persistent and toxic organic contaminants often found co-contaminated in anthropogenic and petrochemical industrial sites. Therefore, an experiment was performed for the safe biodegradation of benzene and benzo[a]pyrene (BaP) through thermally-enhanced biodegradation, and to explore the influence of elevated thermal treatments on microbial diversity and composition. The results revealed that elevated thermal treatments (15 to 45 °C) significantly enhanced the diversity of both bacteria and fungi. The composition analysis revealed that short-term and long-term elevated temperature conditions can directly enhance the specificity of microorganisms that play a crucial role in the biodegradation of benzene and BaP co-contaminated soil. Moreover, the indirect role of elevated temperature conditions on microbial compositions was through the fluctuations of soil properties, especially soil pH, moisture, TOC, potassium, phosphorous, total Fe, Fe(II), and Fe(III). In addition, the correlation analyses revealed that thermal exposure enhances the synergistic association (fungal-fungal, fungal-bacterial, bacterial-bacterial) of microbes to degrade the toxic contaminants and to cope with harsh environmental conditions. These results concluded that the biodegradation of benzene and BaP co-contamination was efficiently enhanced under the thermally-enhanced biodegradation approach and the elevation of temperature can affect the microbial compositions directly via microbial specificity or indirectly by influencing the soil properties.

Insight into heat dissipation in fractured rock influenced by groundwater influx and heat source configurations using numerical analysis

The characterization and evaluation of heat dissipation effects in fractured rock is becoming a priority topic with respect to the potential application of low-temperature thermal remediation in these settings. A three-dimensional numerical model was utilized to investigate heat dissipation-related thermo-hydrological processes in an upper fractured rock layer and a lower impermeable bedrock layer. To identify the factors controlling spatial temperature variances in the fractured rock layer accounting for a scaled heat source and variable groundwater flow, global sensitivity analyses were conducted on the variables using three categories: heat source, groundwater flow, and rock properties. A discrete Latin-hypercube-one-at-a-time method was used to conduct the analyses. A heat dissipation coefficient was proposed to evaluate the correlation between heat dissipation effects and transmissivity based on a case study using the hydrogeological setting of a well-characterized Canadian field site. The results show a significance ranking of three sets of variables controlling heat dissipation processes in both the central and the bottom areas of the heating zone: specifically, heat source > groundwater > rock. The groundwater influx and heat conduction in the rock matrix are key factors determining heat dissipation at the upstream and bottom areas of the heating zone, respectively. The heat dissipation coefficient is closely associated with the transmissivity of the fractured rock in a monotonic relationship. A significant growth rate of the heat dissipation coefficient appears when the transmissivity is between 1 × 10^-6 and 2 × 10^-5m²/s. The results suggest that the low-temperature thermal remediation can be a promising technique to adapt the significant heat dissipation in highly weathered fractured rock.

Bioremediation of Organic Pollutants in Soil-Water System: A Review

Soil-water pollution is of serious concern worldwide. There is a public outcry against the continually rising problems of pollution to ensure the safest and healthiest subsurface environment for living beings. A variety of organic pollutants causes serious soil-water pollution, toxicity and, therefore, the removal of a wide range of organic pollutants from contaminated matrix through the biological process rather than physico-chemical methods is an urgent need to protect the environment and public health. Being an ecofriendly technology, bioremediation can solve the problems of soil-water pollution due to hydrocarbons as it is a low-cost and self-driven process that utilises microorganisms and plants or their enzymes to degrade and detoxify pollutants and thus, promote sustainable development. This paper describes the updates on the bioremediation and phytoremediation techniques which have been recently developed and demonstrated at the plot-scale. Further, this paper provides details of wetland-based treatment of BTEX contaminated soils and water. The knowledge acquired in our study contributes extensively towards understanding the impact of dynamic subsurface conditions on engineered bioremediation techniques.

Thermally enhanced bioremediation: A review of the fundamentals and applications in soil and groundwater remediation

Thermally enhanced bioremediation (TEB), a new concept proposed in recent years, explores the combination of thermal treatment and bioremediation to address the challenges of the low efficiency and long duration of bioremediation. This study presented a comprehensive review regarding the fundamentals of TEB and its applications in soil and groundwater remediation. The temperature effects on the bioremediation of contaminants were systematically reviewed. The thermal effects on the physical, chemical and biological characteristics of soil, and the corresponding changes of contaminants bioavailability and microbial metabolic activities were summarized. Specifically, the increase in temperature within a suitable range can proliferate enzymes enrichment, extracellular polysaccharides and biosurfactants production, and further enhancing bioremediation. Furthermore, a systematic evaluation of TEB applications by utilizing traditional in situ heating technologies, as well as renewable energy (e.g., stored aquifer thermal energy and solar energy), was provided. Additionally, TEB has been applied as a biological polishing technology post thermal treatment, which can be a cost-effective method to address the contaminants rebounds in groundwater remediation. However, there are still various challenges to be addressed in TEB, and future research perspectives to further improve the basic understanding and applications of TEB for the remediation of contaminated soil and groundwater are presented.

Field study of microbial community structure and dechlorination activity in a multi-solvents co-contaminated site undergoing natural attenuation

BTEX and chlorinated aliphatic hydrocarbons (CAHs) are the common pollutants found at contaminated sites, and natural attenuation (NA) of CAHs was widely observed where they coexist. In this work, the groundwater in a site co-contaminated with BTEX and CAHs was monitored for 1 year. The compositions and activities of the microfloras, especially dechlorinators and their relationships with the contaminants, geochemical properties, seasons and depth were evaluated. The results are consistent with the well-known NA conceptual model where CAHs are not able to stimulate the enrichment of dechlorinators alone, but BTEX does promote dechlorination. The higher temperature, rather than ORP in the deeper groundwater of the wet season became a key factor to promote the abundance of dechlorinators, but only when BTEX was available, indicating that the substrates from the BTEX biodegradation played an important role in the dechlorinator enrichment. The elevated ORP in the shallower groundwater exceeded the optimum conditions for reductive dechlorination and no significant seasonal variation of dechlorinators was found. The co-occurrence network revealed the cooperative interactions among the functional microfloras in which dechlorinators, BTEX degraders, and fermentative bacteria jointly promoted the dechlorination. These findings provided us a further understanding of the NA processes in a commingled plume.

A critical review of the influence of groundwater level fluctuations and temperature on LNAPL contaminations in the context of climate change

The intergovernmental panel on climate change (IPCC) predicts significant changes in precipitation patterns, an increase in temperature, and groundwater level variations by 2100. These changes are expected to alter light non-aqueous phase liquid (LNAPL) impacts since groundwater level fluctuations and temperature are known to influence both the mobility and release of LNAPL compounds to air and groundwater. Knowledge of these potential effects is currently dispersed in the literature, hindering a clear vision of the processes at play. This review aims to synthesize and discuss the possible effects of the increase in temperature and groundwater level fluctuations on the behavior of LNAPL and its components in a climate change context. In summary, a higher amplitude of groundwater table variations and higher temperatures will probably increase biodegradation processes, the LNAPL mobility, and spreading across the smear zone, favoring the release of LNAPL compounds to the atmosphere and groundwater but decreasing the LNAPL mass and its longevity. Outcomes will, nevertheless, vary greatly across arid, cold, or humid coastal environments, where different effects of climate change are expected. The effects of the climate change factors linked to soil heterogeneities, local conditions, and weathering processes will govern LNAPL behavior and need to be further clarified.

Sulfidic acetate mineralization at 45°C by an aquifer microbial community: key players and effects of heat changes on activity and community structure

High-Temperature Aquifer Thermal Energy Storage (HT-ATES) is a sustainable approach for integrating thermal energy from various sources into complex energy systems. Temperatures ≥45°C, which are relevant in impact zones of HT-ATES systems, may dramatically influence the structure and activities of indigenous aquifer microbial communities. Here, we characterized an acetate-mineralizing, sulfate-reducing microbial community derived from an aquifer and adapted to 45°C. Acetate mineralization was strongly inhibited at temperatures ≤25°C and 60°C. Prolonged incubation at 12°C and 25°C resulted in acetate mineralization recovery after 40-80 days whereas acetate was not mineralized at 60°C within 100 days. Cultures pre-grown at 45°C and inhibited for 28 days by incubation at 12°C, 25°C, or 60°C recovered quickly after changing the temperature back to 45°C. Phylotypes affiliated to the order Spirochaetales and to endospore-forming sulfate reducers of the order Clostridiales were highly abundant in microcosms being active at 45°C highlighting their key role. In summary, prolonged incubation at 45°C resulted in active microbial communities mainly consisting of organisms adapted to temperatures between the typical temperature range of mesophiles and thermophiles and being resilient to temporary heat changes.

Estuarine gradients dictate spatiotemporal variations of microbiome networks in the Chesapeake Bay

BACKGROUND

Annually reoccurring microbial populations with strong spatial and temporal variations have been identified in estuarine environments, especially in those with long residence time such as the Chesapeake Bay (CB). However, it is unclear how microbial taxa cooccurr and how the inter-taxa networks respond to the strong environmental gradients in the estuaries.

RESULTS

Here, we constructed co-occurrence networks on prokaryotic microbial communities in the CB, which included seasonal samples from seven spatial stations along the salinity gradients for three consecutive years. Our results showed that spatiotemporal variations of planktonic microbiomes promoted differentiations of the characteristics and stability of prokaryotic microbial networks in the CB estuary. Prokaryotic microbial networks exhibited a clear seasonal pattern where microbes were more closely connected during warm season compared to the associations during cold season. In addition, microbial networks were more stable in the lower Bay (ocean side) than those in the upper Bay (freshwater side). Multivariate regression tree (MRT) analysis and piecewise structural equation modeling (SEM) indicated that temperature, salinity and total suspended substances along with nutrient availability, particulate carbon and Chl a, affected the distribution and co-occurrence of microbial groups, such as Actinobacteria, Bacteroidetes, Cyanobacteria, Planctomycetes, Proteobacteria, and Verrucomicrobia. Interestingly, compared to the abundant groups (such as SAR11, Saprospiraceae and Actinomarinaceae), the rare taxa including OM60 (NOR5) clade (Gammaproteobacteria), Micrococcales (Actinobacteria), and NS11-12 marine group (Bacteroidetes) contributed greatly to the stability of microbial co-occurrence in the Bay. Modularity and cluster structures of microbial networks varied spatiotemporally, which provided valuable insights into the 'small world' (a group of more interconnected species), network stability, and habitat partitioning/preferences.

CONCLUSION

Our results shed light on how estuarine gradients alter the spatiotemporal variations of prokaryotic microbial networks in the estuarine ecosystem, as well as their adaptability to environmental disturbances and co-occurrence network complexity and stability.

Biodegradation of salicylic acid, acetaminophen and ibuprofen by bacteria collected from a full-scale drinking water biofilter

This study examined the biodegradation of two pharmaceuticals-acetaminophen, and ibuprofen, and one natural organic surrogate-salicylic acid, by bacteria seeded from backwash water collected from a full-scale biofiltration plant. The degradation was studied in the presence of oxygen. Complete removal of salicylic acid was observed in 27-66 h depending on the seasonality of the collected backwash water, while 90-92% acetaminophen removal was observed in more than 225 h. Ibuprofen demonstrated poor removal efficiencies with only 50% biodegradation after 230 h. Adenosine tri phosphate (ATP) in the reactor was found to be linked with the biodegradation rate. ATP was found to be correlated with oxygen uptake rate (OUR). ATP also had a correlation with each of extracellular polymeric substances (EPS), protein and polysaccharides. These results highlight the potential for increasing the biodegradation rates to achieve enhanced contaminant removal.

Applicability of ground source heat pumps as a bioremediation-enhancing technology for monoaromatic hydrocarbon contaminants

Geothermal or ground source heat pumps (GSHPs) are among the highest growing renewable energy technologies used for heating and cooling of buildings. However, despite being a well-established technology, their geo-environmental effects such as impact of the heat on the biosphere is still not thoroughly understood. This study uses FEFLOW software, to simulate heat and mass transport of a vertical closed-loop GSHP system. Transient flow and heat transport results for a multiple borehole system are presented which indicate long-term effects on subsurface temperature. Moreover, the impact of temperature change in a contaminated granular porous subsurface during remediation applications is examined. In particular, as subsurface temperatures are elevated due to geothermal heating, sorption will decrease and biodegradation rates will increase. These effects are examined in the context of contaminant transport, to evaluate the possibility of utilizing geothermal heating as a remediation strategy. The results revealed that temperature changes caused by GSHP operation can significantly enhance biodegradation of hydrocarbon contaminants. For instance, elevated subsurface temperature resulted in 97% reduction in benzene total mass, after one year of GSHP operation for a typical office building in Toronto.

Development of a feedback control system for a differential biofilter degrading toluene contaminated air

In this study, a proportional - integral feedback control system was implemented on a lab-scale differential biofilter to control the gas phase toluene concentration in the soil bed through online manipulation of the inlet toluene concentration. The feedback control system was based on a cascade controller that manipulated the setpoint of an air bath diffusion system to manipulate the inlet toluene concentration. The controller performed well for toluene concentrations in the reactor of 10 - 300 ppm for both setpoint changes and disturbance rejections; however, the system was nonlinear requiring different tuning parameters at different outlet concentrations. Feedback control of the toluene concentration in the differential reactor was used to explore the impact of concentration on start-up and long-term biofilter operation in a rigorous fashion. Starting at an reactor concentration of 20 ppm and then increasing to 65 ppm increased the toluene removal rate (33 ± 1.6 g m^-3h^-1) compared to starting the reactor at an outlet concentration of 81 ppm before settling at 65 ppm (42 ± 0.9 g m^{- 3}h^-1). The toluene removal rate increased with increasing outlet toluene concentration and then eventually decreased when reaching the inhibitory toluene concentration (ranged from 80 to 250 ppm).

Applications of chitosan in environmental remediation: A review

Environmental biotechnology is the use of biotechnology to develop and regulate biological systems for the remediation of environmental contamination. Nature has gifted ample material for remediation of its resources, among which chitosan is one of the most important and largely available biomaterial globally. Chitosan is a biopolymer obtained by deacetylation of chitin extracted from marine waste and its applications from drug delivery to food additives are broadly available. Chitosan exhibit several properties such as availability, low cost, high biocompatibility, and biodegradability. These properties make it biologically and chemically acceptable for use in various fields. Due to some limitations of pure chitosan, there has been a growing interest in modifying the chitosan in order to improve the original properties and widen the applications of pure phase chitosan. Various modified forms of chitosan and their associated applications are reviewed here with emphasis on their use in environmental remediation. The demand of chitosan in the global industrial market is growing which is briefly explained in this paper. Chitosan is used for water purification since a long time and still progress is going on for making it more efficient in the removal process. It can be used as a flocculent and coagulant, as an adsorbent for removing the contaminants like heavy metals, dyes, pesticides, antibiotics, biological contaminants from wastewater. Soil remediation using chitosan material is explained in this review. Various other applications such as drug delivery, food additives, tissue engineering are thoroughly reviewed.

Assessment of groundwater contamination risk by BTEX from residual fuel soil phase

The aim of this work is to assess the risk of groundwater contamination associated with BTEX dissolution from fuels as a residual phase. Numerical simulations of sixty scenarios were carried out with the software HYDRUS 2D/3D. Groundwater contamination risk was analyzed given the combination of different porous media textures (silt loam, sandy loam and clay), water fluxes (0.5%, 1% or 3% Rainfall), water table depths (1.5, 2.5, 5 or 8 m below ground surface) and biodegradation rate (active or null). Risk was calculated comparing leachate concentrations to the aquifer and limits established by an international guideline for human drinking water. In all cases, benzene and toluene had the highest mobility in the dissolved phase. Contrary, xylene and ethylbenzene tended to concentrate close to the source zone. These two compounds predominantly concentrated in the solid phase. Calculated risk was proportional to the water flux rate and inversely proportional to the unsaturated thickness. Without biodegradation, in fine-grained sediments risk was very high for shallow aquifers (> 1.5 m depth) and moderate or low for deeper aquifers. However, in sandy loam sediments risk was classified as very high for aquifers up to 8 m deep. When biodegradation was considered, leached concentrations were greatly reduced in the three textures. BTEX concentration in Bahía Blanca City´s aquifer showed acceptable agreement with simulated scenarios. The most sensitive parameters to model results were biodegradation > foc > water table depth > Ks. This study is important for assessing the risks and developing management strategies for fuel contaminated sites.

Dynamics of hydrocarbon mineralization characterized by isotopic analysis at a jet-fuel-contaminated site in subtropical climate

Release of benzene, toluene, ethylbenzene, and xylene (BTEX) as components of the light non-aqueous phase liquids (LNAPL) contaminates soil and groundwater. Assessing the mechanisms of degradation and mineralization of BTEX in groundwater helps understand the migration of the dissolved plume, enabling the reduction of risks to humans. Here, we studied the fate of ethylbezene, m,p-xylenes and o-xylenes and the accompanying formation of methane in a Cenozoic lateritic aquifer in Brazil by compound-specific carbon stable isotope analysis (CSIA), to gain insights into the complex dynamics of release and biodegradation of BTEX in the LNAPL source zone. The enrichment of ∂¹³C in aromatic compounds dissolved in groundwater compared to the corresponding compounds in LNAPL indicate that CSIA can provide valuable information regarding biodegradation. The isotopic analysis of methane provides direct indication of oxidation mediated by aquifer oxygenation. The ∂¹³C-CO₂ values indicate methanogenesis prevailing at the border and aerobic biodegradation in the center of the LNAPL source zone. Importantly, the isotopic results allowed major improvements in the previously developed conceptual model, supporting the existence of oxic and anoxic environments within the LNAPL source zone.

Quantification of toluene phytoextraction rates and microbial biodegradation functional profiles at a fractured bedrock phytoremediation site

This field study evaluated the efficacy of a mature hybrid poplar phytoremediation system for the remediation of toluene in a fractured bedrock aquifer site. Phytoextraction activity of the trees and the ecology and biodegradation potential of root-colonizing bacteria that ultimately influence how much toluene is transported from the roots and phytoextracted to the aboveground point of measurement were explored. Peak-season toluene mass removal rates ranging from 313 to 743 μg/day were quantified using passive in planta contaminant sampling techniques and continuous heat dissipation transpiration measurements in tree stems. Root bacterial microbiome structure and biodegradation potential were evaluated via high-throughput sequencing and predictive metagenomic functional modelling of bacterial 16S rRNA genes in roots. Poplar roots were colonized mostly by Proteobacteria, Actinobacteria, and Bacteroidetes. Distinct, more uniform communities were observed in roots associated with trees planted in the toluene source area compared to other areas, with differences apparent at lower taxonomic levels. Significant enrichment of Streptomyces in roots was observed in the source area, implicating that genus as a potentially important poplar endophyte at toluene-impacted sites. Moreover, significantly greater aerobic toluene biodegradation capacity was predicted in these roots compared to other areas using taxonomic functional modelling. Together with passive sampling, the molecular results provided supporting evidence of biodegradation activity in the source area and contextualized the detected phytoextraction patterns. These results support the application of phytoremediation systems for aromatic hydrocarbons in environments with complex geology and demonstrate field-validated monitoring techniques to assess phytoextraction and biodegradation in these systems.

Biodegradation of hydrocarbons by microbial strains in the presence of Ni and Pb

Microbial strains capable of degrading petroleum hydrocarbons were isolated from the Yellow River Delta and screened for bio-surfactant production. The bio-surfactant-producing characteristics of the isolates were evaluated, and all the isolates which could produce bio-surfactant were identified by 16S rRNA gene sequencing. The results showed that the isolates belong to Bacillus sp. (72%), Ochrobactrum sp. (0.16%), Brevundimonas sp. (0.06%) and Brevibacterium sp. (0.06%). The biodegradability of crude oil, gasoline, diesel oil and other hydrocarbons by microbial strains were studied, among which the biodegrading ability of strain P1 and strain P19 is higher than other strains. Both strains P1 and P19 can degrade n-hexane and n-hexadecane effectively and have wide substrate extensiveness. In addition, Ni promoted the biodegradability of toluene by both strain P1 and strain P19, while Pb inhibited the growth of strain P19 and decreased its ability to biodegrade toluene. The studies revealed that microbes including strain P1 and strain P19 can be utilized in bioremediation of co-contaminated water with petroleum and heavy metals including Ni and Pb.