Facile synthesis of magnetic ZnFe2O4-reduced graphene oxide hybrid and its photo-Fenton-like behavior under visible iradiation

Discerning the catalytic treatment of cationic dye wastewater in photoreactor comprising ternary (Co3+/Co2+)-embedded SnO2/ZnFe2O4 composite sensitive toward ultra-violet illumination

Herein, magnetic (Co3+/Co2+)-integrated SnO2, SnO2/ZnFe2O4, and ZnFe2O4 composites have been prepared from triply distilled water and 30% of isopropanol in the water medium. The phase evolution, microstructure, and magnetism were investigated successfully and tested for cationic dye wastewater degradation containing Rhodamine 6G and Methylene Blue under ultra-violet irradiation. Composite spheres are attributed to efficient heterojunction interfaces between ZnFe2O4 and SnO2 semiconductors with the support of (Co3+/Co2+) nanoparticles. The results provide a simple, low-cost, environmentally friendly, and scalable method of ternary composites to degrade mixed dyes. Co3+/Co2+-implanted SnO2/ZnFe2O4 offered narrowed bandgap energy, more light absorption, diminishing electron-hole recombination, and more charge carriers toward cationic dye wastewater than the binary components. The rate constant of Rhodamine 6G degradation was observed at 0.0237 min-1, and Methylene Blue degradation was observed at 0.0187 min-1 at 90 min under UV (λ = 365 nm) irradiation. Capturing studies of various organic reactive species and mechanisms of composites was also proposed in detail.

Advances in magnetic materials for microplastic separation and degradation

The widespread use of plastics in modern human society has led to severe environmental pollution with microplastics (MP/MPs). The rising consumption of plastics raises the omnipresence of microplastics in aquatic environments, which carry toxic organic matter, transport toxic chemicals, and spread through the food chain, seriously threatening marine life and human health. In this context, several advanced strategies for separating and degrading MPs from water have been developed recently, and magnetic materials and their nanostructures have emerged as promising materials for targeting, adsorbing, transporting, and degrading MPs. However, a comprehensive review of MP remediation using magnetic materials and their nanostructures is currently lacking. The present work provides a critical review of the recent advances in MP removal/degradation using magnetic materials. The focus is on the comparison and analysis of the MP's removal efficiencies of different magnetic materials, including iron/ferrite nanoparticles, magnetic nanocomposites, and micromotors, aiming to unravel the underlying roles of magnetic materials in different types of MP degradation and present the general strategies for designing them with optimal performance. Finally, the review outlines the forthcoming challenges and perspectives in the development of magnetic nanomaterials for MP remediation.

Facile synthesis of magnetic ZnFe2O4/AC composite to activate peroxydisulfate for dye degradation under visible light irradiation

Heterogeneous photocatalysis/persulfate oxidation process has been considered as a promising technology for dye contaminants removal. The magnetic ZnFe₂O₄/active carbon (AC) composites were hydrothermally synthesized and firstly used to activate peroxydisulfate (PDS) for rhodamine B (RhB) degradation under visible LED light irradiation. The optimized Vis-ZnFe₂O₄/AC(4/1)-PDS system can enhance the RhB degradation efficiency by 32.01% and 13.87% compared with Vis-ZnFe₂O₄-PDS and Vis-AC-PDS systems, respectively. The influence of operational parameters such as catalyst dosage (0.2 - 0.4 g L^-1), PDS concentration (1.0 - 2.0 g L^-1), temperature (25 - 45 °C), solution pH (2.7 - 10.9), and coexisting inorganic ions (Cl^-, NO₃^-, HCO₃^-, PO₄^3-, Cu²⁺, Fe³⁺, and Ca²⁺) on RhB degradation was studied, and 100% of RhB (20 mg L^-1) was degraded after 80 min at operational condition: 0.30 g L^-1 of ZnFe₂O₄/AC(4/1) and 1.5 g L^-1 of PDS, solution pH of 2.74, reaction temperature of 25 °C. The quenching experiments, EPR test, and XPS analysis were employed to reveal the proposed mechanism, which demonstrated that ¹O₂ played a more important role than other reactive species (SO₄^•-, •OH, O₂^•-, and h⁺) in RhB degradation. The generation of ¹O₂ via the two routes was as follows: (i) the in situ formed active oxygen (O^*) reacted with HSO₅^- to produce ¹O₂; (ii) O₂^•- was oxidized by h⁺ to form ¹O₂. After five consecutive cycles, the photodegradation efficiency of RhB by ZnFe₂O₄/AC(4/1) catalyst slightly decreased from 88.52 to 83.92%, indicating the excellent reusability of ZnFe₂O₄/AC(4/1) photocatalyst. As designed, Vis-ZnFe₂O₄/AC-PDS oxidation system can effectively remove RhB from the different real water matrices, and the degradation efficiency of RhB in tap water, river water, and secondary effluent was 78.24%, 79.55%, and 74.53% after 80 min of reaction, respectively.

Solvothermal synthesis of octahedral and magnetic CoFe2O4-reduced graphene oxide hybrids and their photo-Fenton-like behavior under visible-light irradiation

We report a facile solvothermal synthesis of novel octahedral CoFe₂O₄-reduced graphene oxide (RGO) hybrid and pure CoFe₂O₄ that were used as heterogeneous photo-Fenton catalysts for the degradation of organic dyes in water. We investigated the structures, morphologies and catalytic activity of both the CoFe₂O₄ nanoparticles and CoFe₂O₄-RGO hybrids. The morphology of CoFe₂O₄ nanoparticles displays size-dependent shapes changing from granular (or sheet) to octahedral shapes with the introduction of RGO. Compared with bare CoFe₂O₄, the octahedral CoFe₂O₄-RGO hybrids serve as novel bifunctional materials displaying higher saturation magnetization values and excellent heterogeneous activation of H₂O₂ at nearly neutral pH. The high saturation magnetization (41.98 emu g^-1) of CoFe₂O₄-RGO hybrids aids their separation from the reaction mixture. In addition, the remarkable enhancement in the photo-Fenton activity of the CoFe₂O₄-RGO hybrids under visible light irradiation was attributed to the graphene/CoFe₂O₄ heterojunction, which aided the separation of excited electrons and holes. Furthermore, the CoFe₂O₄-RGO hybrids exhibited better removal efficiency for cationic methylene blue (MB) dye than for anionic methyl orange (MO) dye. Meanwhile, the CoFe₂O₄-RGO hybrids displayed acceptable photocatalytic stability, and we proposed an activation mechanism of H₂O₂ by the octahedral CoFe₂O₄-RGO hybrids.

Carbon-Based Nanocomposites as Fenton-Like Catalysts in Wastewater Treatment Applications: A Review

Advanced oxidation (e.g., fenton-like reagent oxidation and ozone oxidation) is a highly important technology that uses strong oxidizing free radicals to degrade organic pollutants and mineralize them. The fenton-like reactions have the characteristics of low cost, simple operation, thorough reaction and no secondary pollution. Fenton-like reagents refer to a strong oxidation system composed of transition metal ions (e.g., Fe3+, Mn2+ and Ag+) and oxidants (hydrogen peroxide, potassium persulfate, sodium persulfate, etc). Graphene and carbon nanotube possess a distinctive mechanical strength, flexibility, electrical and thermal conductivity and a very large specific surface area, which can work as an excellent carrier to disperse the catalyst and prevent its agglomeration. Fullerene can synergize with iron-based materials to promote the reaction of hydroxyl groups with organic pollutants and enhance the catalytic effect. Fenton-like catalysts influence the catalytic behavior by inducing electron transfer under strong interactions with the support. Due to the short lifespan of free radicals, the treatment effect is usually enhanced with the assistance of external conditions (ultraviolet and electric fields) to expand the application of fenton-like catalysts in water treatment. There are mainly light-fenton, electro-fenton and photoelectric-fenton methods. Fenton-like catalysts can be prepared by hydrothermal method, impregnation and coordination-precipitation approaches. The structures and properties of the catalysts are characterized by a variety of techniques, such as high-resolution transmission electron microscopy, high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption near-edge structure spectroscopy. In this paper, we review the mechanisms, preparation methods, characterizations and applications status of fenton-like reagents in industrial wastewater treatment, and summarize the recycling of these catalysts and describe prospects for their future research directions.

Photocatalytic degradation of cephalexin by g-C3N4/Zn doped Fe3O4 under visible light

In this work, we reported synthesis of a novel magnetically separable g-C₃N₄/Zn doped Fe₃O₄ composite (g-CN/ZnFe) by a simple polyol thermal method. The characteristics of the as-prepared composite was checked by XRD, SEM, TEM, XPS, PL technologies. The optimized weight ratio of g-C₃N₄ and Zn doped Fe₃O₄ was investigated. In addition, the photocatalytic activities of the composite products were checked by degradation of Cephalexin (CEX) under visible light. The results showed that g-CN/ZnFe composite with an added 20% g-C₃N₄ exhibited the highest photocatalytic activity for cephalexin under visible light irradiation. The improved photocatalytic activity of 20% g-CN/ZnFe can be ascribed to the low combination rate of photoinduced electron/hole pairs. Especially, g-CN/ZnFe can be recovered easily by using an external magnetic field and has the high stability after six runs. These properties of the g-CN/ZnFe as-prepared composite could be a promising photocatalyst for the degradation of pharmaceutical contaminants.

Facile synthesis of Fe3O4/CuO a core-shell heterostructure for the enhancement of photocatalytic activity under visible light irradiation

A magnetically separable Fe₃O₄/CuO core-shell heterostructure photocatalyst was synthesized by hydrothermal method. The obtained photocatalyst was characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and UV-visible diffuse reflectance (UV-DRS). The obtained photocatalyst was used for the degradation of azo dye Direct Red 89 (DR89), under visible light irradiation provided by fluorescent lamp of 100 W in the presence of 7 mL of H₂O₂ (30%); the results of the photocatalytic activity for Fe₃O₄/CuO photocatalyst showed that in the presence of 0.75 g dispersed in 250 mL of 40 mg/L of DR89 dye at pH 6 the dye was completely removed after 240 min. Moreover, the photocatalytic activity of the prepared Fe₃O₄/CuO was enhanced 11 and 9 times compared with the pure Fe₃O₄ or CuO. The effect of initial dye concentrations on the photocatalytic activity was studied in the range of 20-60 mg/L, and the results showed that the catalyst has a good photocatalytic activity of 89% even at high concentration (60 mg/L). Furthermore, the catalyst maintained its activity after 5 cycles, and its paramagnetic property facilitates its recovery. The excellent photodegradation activity of Fe₃O₄/CuO was attributed to the low band gap of the catalyst equal to 1.54 eV and the enhancement of light absorption in visible range of 330-780 nm, but also to a better charge carriers separation, due to the presence of Fe₃O₄ that reduces electron/hole recombination.

Synergic Effect of Nanolignin and Metal Oxide Nanoparticles into Poly(l-lactide) Bionanocomposites: Material Properties, Antioxidant Activity, and Antibacterial Performance

Binary and ternary poly(l-lactide) (PLLA)-based nanocomposites, containing nanolignin (1 wt %) and different metal oxide nanoparticles (0.5 wt %, Ag₂O, TiO₂, WO₃, Fe₂O₃, and ZnFe₂O₄), were realized by solvent casting, and their morphological, thermal, surface, optical, antioxidant, and antimicrobial characterizations were performed. The presence of metal oxide nanoparticles at the selected weight concentration affects the surface microstructure of the PLLA polymer, and this outcome is particle-type dependent, according to the shape, morphology, and chemical properties of the selected nanoparticles (NPs). Analogously, wettability of PLLA-based nanocomposites was slightly modified by the presence of hydrophobic lignin nanoparticles and different shaped metal oxides. Results of differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD) tests confirmed that nanoparticle addition confined the mobility of the amorphous phase, increasing at the same time the formation of more numerous but less perfect PLLA crystals. Interestingly, antioxidant activity was also obtained in ternary-based nanocomposites, where a synergic effect of lignin and metal oxide nanoparticles was obtained. Antibacterial tests showed manifest activity of TiO₂ and Ag₂O nanoparticles containing PLLA films, and the time dependence was more evident for Staphylococcus aureus than for Escherichia coli. Lignin nanoparticles are able to provide protection against UV light while still allowing visible light to pass and even surpass the UV-protection capacity provided by many inorganic nanoparticles. This makes them an attractive renewable additive for the realization of PLLA/metal oxide nanocomposites in the fields of food, drug packaging, and biomedical industry, where antibacterial and antioxidant properties are required.

Synthesis and assessment of schwertmannite/few-layer graphene composite for the degradation of sulfamethazine in heterogeneous Fenton-like reaction

Schwertmannite (sch), an iron oxyhydrosulfate mineral, can catalyse a Fenton-like reaction to degrade organic contaminants, but the reduction of Fe(III) to Fe(II) on the surface of schwertmannite is a limiting step for the Fenton-like process. In the present study, the sch/few-layer graphene (sch-FLG) composite was synthesized to promote the catalytic activity of sch in a Fenton-like reaction. It was found that sch can be successfully carried by FLG in sch-FLG composite, mainly via the chemical bond of Fe-O-C on the surface of sch-FLG. The sch-FLG exhibited a much higher catalytic activity than sch or FLG for the degradation of sulfamethazine (SMT) in the heterogeneous Fenton-like reaction, which resulted from the fact that the FLG can pass electrons efficiently. The degradation efficiency of SMT was around 100% under the reaction conditions of H2O2 200-500 mg l-1, sch-FLG dosage 1-2 g l-1, temperature 28-38°C, and initial solution pH 1-9. During the repeated uses of sch-FLG in the Fenton-like reaction, it maintained a certain catalytic activity for the degradation of SMT and the mineral structure was not changed. In addition, SMT may be finally mineralized in the Fenton-like reaction catalysed by sch-FLG, and the possible degradation pathways were proposed. Therefore, the sch-FLG is an excellent catalyst for SMT degradation in a heterogeneous Fenton-like reaction.

Novel reduced graphene oxide/ZnBi2O4 hybrid photocatalyst for visible light degradation of 2,4-dichlorophenoxyacetic acid

A new highly efficient rGO/ZnBi₂O₄ hybrid catalyst has been successfully synthesized through oxidation-reduction and co-precipitation methods, followed by heating at 450 °C. The obtained rGO/ZnBi₂O₄ catalyst was characterized by X-ray diffraction (XRD), UV-vis diffuse reflectance spectroscopy (DRS), scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The catalytic activity of rGO/ZnBi₂O₄ under visible light irradiation was tested using 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution. The rGO/ZnBi₂O₄ hybrid catalyst containing 2% rGO (2.0rGO/ZnBi₂O₄) showed the best catalytic performance. More than 90% of 2,4-D in a 30 mg/L solution was degraded after 120 min of visible light irradiation using 2.0rGO/ZnBi₂O₄ at 1.0 g/L concentration. Moreover, the 2.0rGO/ZnBi₂O₄ catalyst showed excellent stability over four consecutive cycles, with no significant changes in the photocatalytic degradation rate. This study demonstrated that rGO/ZnBi₂O₄ may be a promising, low-cost, and green photocatalyst for environmental remediation applications.

Construction of ZnFe2O4/rGO composites as selective magnetically recyclable photocatalysts under visible light irradiation

This paper reports on highly active ZnFe₂O₄/reduced graphene oxide (ZnFe₂O₄/rGO) nanocomposites synthesized by a modified sol-gel method. The as-prepared samples have been characterized by XRD, TEM, XPS and other detection methods, which demonstrate that ZnFe₂O₄ nanoparticles (NPs) with a diameter of 15 ∼ 50 nm were densely grown on the rGO substrates. The photocatalytic activities of ZnFe₂O₄/rGO catalysts were evaluated by the degradation of Methylene blue (MB) under visible light. The results showed that the ZnFe₂O₄/rGO catalysts had high photocatalytic activity, and the degradation efficiency of MB was almost 100% within 180 min. Moreover, the ZnFe₂O₄/rGO catalysts also had a great removal effect on Rhodamine B (RhB) and Methyl orange (MO). Mechanistic studies revealed that the rGO acted as a stabilizer to prevent ZnFe₂O₄ from aggregation and improved the separation of photo-generated electrons. The high efficiency for dye degradation was attributed to the generation of hydroxyl radicals (·OH) via the photochemical decomposition of H₂O₂ on ZnFe₂O₄/rGO catalysts, which was responsible for the oxidation of the dyes. Of note, the ZnFe₂O₄/rGO catalyst maintained an efficiency of over 90% after five cycles. The XRD, XPS and VSM characterization revealed that the ZnFe₂O₄/rGO catalysts had a stable crystal structure and can be easily separated.

One-step synthesis of N-doped metal/biochar composite using NH3-ambiance pyrolysis for efficient degradation and mineralization of Methylene Blue

A series of new biochar-supported composite based on the combination of biochar and metallic nanoparticles (NPs) were produced through single-step pyrolysis of FeCl₃-Ti(OBu)₄ laden agar biomass under NH₃ environment. The physiochemical properties of composites were characterized thoroughly. It has found that heating temperature and N-doping through NH₃-ambiance pyrolysis significantly influence the visible-light sensitivity and bandgap energy of composites. The catalytic activities of composites were measured by degradation of Methylene Blue (MB) in the presence or absence of H₂O₂ and visible-light irradiation. Our best catalyst (N-TiO₂-Fe₃O₄-biochar) exhibits rapid and high MB removal competency (99.99%) via synergism of adsorption, photodegradation, and Fenton-like reaction. Continuous production of O₂^- and OH radicles performs MB degradation and mineralization, confirmed by scavenging experiments and degradation product analysis. The local trap state Ti³⁺, Fe₃O₄, and N-carbon of the catalyst acted as active sites. It has suggested that the Ti³⁺ and N-doped dense carbon layer improve charge separation and shuttle that prolonged photo-Fenton like reaction. Moreover, the catalyst is highly stable, collectible, and recyclable up to 5 cycles with high MB degradation efficiency. This work provides a new insight into the synthesis of highly visible-light sensitized biochar-supported photocatalyst through NH₃-ambiance pyrolysis of NPs-laden biomass.

α-Fe2O3 Nanodisk/Bacterial Cellulose Hybrid Membranes as High-Performance Sulfate-Radical-Based Visible Light Photocatalysts under Stirring/Flowing States

High activity and long-term stability are particularly important for peroxymonosulfate (PMS)-based degradation processes in wastewater treatment, especially under a flowing state. However, if the highly active nanomaterials are in a powder form, they could disperse well in water but would not be convenient for application under varied flow rates. A metal oxide/bacterial cellulose hybrid membrane fixed in a flowing bed is expected to solve these problems. Herein, α-Fe₂O₃ nanodisk/bacterial cellulose hybrid membranes as high-performance sulfate-radical-based visible light photocatalysts are synthesized for the first time. The bacterial cellulose with excellent mechanical stability and film-forming feature not only benefits the formation of a stable membrane to avoid the separation and recycling problems but also helps disperse and accommodate α-Fe₂O₃ nanodisks and thus enhances the visible light absorption performances, leading to an excellent PMS-based visible light degradation efficiency under both stirring and flowing states. Particularly, the optimized hybrid membrane photocatalyzes both cationic and anionic organic dyes under a flowing bed state for at least 84 h with the catalytic efficiency up to 100% and can be easily separated after the reaction, confirming its remarkable catalytic performance and long-term stability. Even under varied flow rates during the continuous process, it efficiently degrades rhodamine B and orange II from 3 to 16 mL h^-1. When the flow rate goes back from high to low, the hybrid membrane quickly recovers its original performance, demonstrating the high activity and stability of the α-Fe₂O₃/bacterial cellulose membrane.

Metal-free carbon materials-catalyzed sulfate radical-based advanced oxidation processes: A review on heterogeneous catalysts and applications

In recent years, advanced oxidation processes (AOPs), especially sulfate radical based AOPs have been widely used in various fields of wastewater treatment due to their capability and adaptability in decontamination. Recently, metal-free carbon materials catalysts in sulfate radical production has been more and more concerned because these materials have been demonstrated to be promising alternatives to conventional metal-based catalysts, but the review of metal-free catalysts is rare. The present review outlines the current state of knowledge on the generation of sulfate radical using metal-free catalysts including carbon nanotubes, graphene, mesoporous carbon, activated carbon, activated carbon fiber, nanodiamond. The mechanism such as the radical pathway and non-radical pathway, and factors influencing of the activation of sulfate radical was also be revealed. Knowledge gaps and research needs have been identified, which include the perspectives on challenges related to metal-free catalyst, heterogeneous metal-free catalyst/persulfate systems and their potential in practical environmental remediation.

Synthesis of graphene-transition metal oxide hybrid nanoparticles and their application in various fields

Single layer graphite, known as graphene, is an important material because of its unique two-dimensional structure, high conductivity, excellent electron mobility and high surface area. To explore the more prospective properties of graphene, graphene hybrids have been synthesised, where graphene has been integrated with other important nanoparticles (NPs). These graphene-NP hybrid structures are particularly interesting because after hybridisation they not only display the individual properties of graphene and the NPs, but also they exhibit further synergistic properties. Reduced graphene oxide (rGO), a graphene-like material, can be easily prepared by reduction of graphene oxide (GO) and therefore offers the possibility to fabricate a large variety of graphene-transition metal oxide (TMO) NP hybrids. These hybrid materials are promising alternatives to reduce the drawbacks of using only TMO NPs in various applications, such as anode materials in lithium ion batteries (LIBs), sensors, photocatalysts, removal of organic pollutants, etc. Recent studies have shown that a single graphene sheet (GS) has extraordinary electronic transport properties. One possible route to connecting those properties for application in electronics would be to prepare graphene-wrapped TMO NPs. In this critical review, we discuss the development of graphene-TMO hybrids with the detailed account of their synthesis. In addition, attention is given to the wide range of applications. This review covers the details of graphene-TMO hybrid materials and ends with a summary where an outlook on future perspectives to improve the properties of the hybrid materials in view of applications are outlined.

Iron encapsulated in 3D N-doped carbon nanotube/porous carbon hybrid from waste biomass for enhanced oxidative activity

Novel iron encapsulated in nitrogen-doped carbon nanotubes (CNTs) supported on porous carbon (Fe@N-C) 3D structured materials for degrading organic pollutants were fabricated from a renewable, low-cost biomass, melamine, and iron salt as the precursors. SEM and TEM micrographs show that iron encapsulated bamboo shaped CNTs are vertically standing on carbon sheets, and thus, a 3D hybrid was formed. The catalytic activities of the prepared samples were thoroughly evaluated by activation of peroxymonosulfate for catalytic oxidation of Orange II solutions. The influences of some reaction conditions (pH, temperature, and concentrations of reactants, peroxymonosulfate, and dye) were extensively evaluated. It was revealed that the adsorption could enrich the pollutant which was then rapidly degraded by the catalytically generated radicals, accelerating the continuous adsorption of residual pollutant. Remarkable carbon structure, introduction of CNTs, and N/Fe doping result in promoted adsorption capability and catalytic performances. Due to the simple synthetic process and cheap carbon precursor, Fe@N-C 3D hybrid can be easily scaled up and promote the development of Fenton-like catalysts.

Degradation of sulfamethazine using Fe3O4-Mn3O4/reduced graphene oxide hybrid as Fenton-like catalyst

In this paper, Fe₃O₄-Mn₃O₄/reduced graphene oxide (RGO) hybrid was synthesized through polyol process and impregnation method and used as heterogeneous Fenton-like catalyst for degradation of sulfamethazine (SMT) in aqueous solution. The hybrid catalyst had higher catalytic efficiency compared with Fe₃O₄-Mn₃O₄ and Mn₃O₄ as catalyst for degradation of SMT_. The effects of pH value, H₂O₂ concentration, catalyst dosage, initial SMT concentration and temperature on SMT degradation were investigated. The removal efficiency of SMT was about 98% at following optimal conditions: pH=3, T=35°C, Fe₃O₄/Mn₃O₄-RGO composites=0.5g/L, H₂O₂=6mM. The inhibitor experiments indicated that the main active species was hydroxyl radicals (·OH) on catalyst surface. At last, the possible catalytic mechanism was proposed.

Effect of Si content on structure and electrochemical performance of ternary nanohybrids integrating Si nanoparticles, N-doped carbon shell, and nitrogen-doped graphene

The Si content in ternary nanohybrids consisting of Si nanoparticles with N-doped carbon (NC) shell wrapped by nitrogen (N)-doped graphene (NG) greatly affects their structure and electrochemical performance.

Influence of precursor pH on the structure and photo-Fenton performance of Fe/hydrochar

Fe/hydrochar exhibited high visible light photo-Fenton activity because hydrochar accelerated the Fe³⁺/Fe²⁺ cycle at the catalyst/water interface.

ZnO/ZnFe2O4 nanocomposite as a broad-spectrum photo-Fenton-like photocatalyst with near-infrared activity

ZnO/ZnFe₂O₄ nanocomposite/H₂O₂ shows NIR activity due to the absorption of NIR, electron–hole pair separation by p–n junction promoted charge transfer, and reaction of electrons with H₂O₂.

Iron encapsulated in boron and nitrogen codoped carbon nanotubes as synergistic catalysts for Fenton-like reaction

Iron nanoparticles (NPs) encapsulated in B, N-codoped carbon nanotubes (Fe@C-BN) as heterogeneous Fenton-like catalysts were obtained by a simple and scalable pyrolysis method, and their performances were examined in the oxidative degradation of various organics in the presence of the different oxidants. The results showed that organic dyes can be effectively degraded by Fe@C-BN in the presence of peroxymonosulfate. Calcination temperature and mass of iron salt significantly affected the structures and performances of the catalysts. The effects of several reaction conditions, such as initial dye concentration, oxidant type (peroxymonosulfate, peroxydisulfate, and H2O2) and dosage, initial pH, inorganic anions, reaction temperature and dye types on oxidation as well as the stability of the composite were extensively evaluated in view of the practical applications. Through the investigation of reaction processes, HO(·) and SO4(·-) radicals were identified using quenching experiments. Owing to the synergistic effects between the iron NPs and B, N-doped carbon, Fe@C-BN catalysts intrinsically display an excellent catalytic activity for Fenton-like reaction. This study gives new insights into the design and preparation of iron NPs encapsulated in B, N-codoped carbon nanotubes as an effective strategy to enhance the overall catalytic activity.

Adsorption and photodegradation kinetics of herbicide 2,4,5-trichlorophenoxyacetic acid with MgFeTi layered double hydroxides

The calcined layered double hydroxides (cLDHs) Ti-doped and undoped MgFe for this study were prepared by co-precipitation method followed by calcination at 500 °C. The as-prepared samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer Emmett Teller (BET) and UV-Vis diffuse reflectance spectrum (DRS) techniques and tested for adsorption and photodegradation (including photocatalytic and photo-Fenton-like) of 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) in aqueous solutions under visible light irradiation. In the range of studied operating conditions, the as-prepared samples exhibited excellent photo-Fenton-like activity, leading to more than 80-95% degradation of 2,4,5-T at initial concentration of 100 mg L(-1) with 4 g calcined LDHs per liter, was accomplished in 360 min, while 2,4,5-T half-life time was as short as 99-182 min. The kinetics of adsorption and photodegradation of 2,4,5-T were also discussed. These results offered a green, low cost and high efficiency photocatalyst for environmental remediation.

Enhanced Photocatalytic Degradation of 17α-Ethinylestradiol Exhibited by Multifunctional ZnFe2 O4 -Ag/rGO Nanocomposite Under Visible Light

In this paper, ZnFe₂ O₄ , a visible light active photocatalyst, was comodified by graphene oxide (GO) and Ag nanoparticles (NPs) to form ZnFe₂ O₄ -Ag/rGO nanocomposite (NC) by facile one-pot hydrothermal method. Reduction of GO and formation of ZnFe₂ O₄ and Ag nanoparticles occurred simultaneously during hydrothermal reaction. The photocatalytic activity of the NC was investigated under visible light, for the degradation of 17α-ethinylestradiol (EE2), a nondye compound, which also is an emerging pollutant with endocrine-disrupting activity. The pseudo rate constant (k') of as-synthesized ZnFe₂ O₄ -Ag/rGO NC was higher by the factor of 14.6 and 5.6 times than the corresponding ZnFe₂ O₄ and ZnFe₂ O₄ /rGO respectively. The synergistic interactions between ZnFe₂ O₄ , Ag and rGO leading to decreased aggregation of the NPs, increased surface area, better absorption in visible region, effective electron-hole generation transfer. However, in the presence of humic acid (HA), the photosensitization effect was predominated by competitive interaction resulting in only 80% removal of EE2 within the same time. Moreover, the composite can easily be magnetically separated for reuse.

Facile fabrication of sea buckthorn biocarbon (SB)@α-Fe2O3 composite catalysts and their applications for adsorptive removal of doxycycline wastewater through a cohesive heterogeneous Fenton-like regeneration

Novel SB@α-Fe₂O₃ composite catalysts were fabricated through a simple thermal conversion process from SB@β-FeOOH precursor, which maintained good adsorption capacity after five successive adsorption/heterogeneous Fenton-like regeneration cycles.

Visible-light-induced photocatalysis and peroxymonosulfate activation over ZnFe2O4 fine nanoparticles for degradation of Orange II

The coupling effect of photocatalysis and PMS activation remarkably manifested in the eco-friendly ZnFe₂O₄/PMS/vis system for Orange II degradation.

Magnetic core-shell CuFe2O4@C3N4 hybrids for visible light photocatalysis of Orange II

Novel CuFe2O4@C3N4 core-shell photocatalysts were fabricated through a self-assembly method and characterized by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, transmission electron microscopy and Uv-vis diffuse reflection spectroscopy. The photocatalytic performances of the CuFe2O4@C3N4 catalysts were evaluated in photo Fenton-like discoloration of Orange II dye using H2O2 as an oxidant under visible-light irradiation (λ>420 nm). It was found the CuFe2O4@C3N4 hybrid (mass ratio of CuFe2O4/g-C3N4 at 2:1) exhibits a superior activity as compared with single component of CuFe2O4 or g-C3N4 and the mixture of g-C3N4 and CuFe2O4, due to the elevation of the separation efficiency of photoinduced electron-hole pairs, resulted from the heterojunction between the interfaces of g-C3N4 and CuFe2O4. The quenching tests of different scavengers displayed that O2(•-), OH and h(+) are responsible for the Orange II decolorization. In addition, the effects of initial concentration of the dye contaminant (0.014-0.140 mM), different anions (Cl(-), SO4(2-), NO3(-), CH3COO(-) and HCO3(-)) and temperature (15-65 °C) in photoreaction were also investigated. The CuFe2O4@C3N4 sample exhibited stable performance without obvious loss of catalytic activity after five successive runs, showing a promising application for the photo-oxidative degradation of environmental contaminants.

Sulfate radicals induced from peroxymonosulfate by cobalt manganese oxides (Co(x)Mn(3-x)O4) for Fenton-Like reaction in water

A series of CoxMn3-xO4 particles as Fenton-like solid catalysts were synthesized, and their catalytic performance in oxidative degradation of organic dye compounds in water was investigated. The surface morphology and structure of the CoxMn3-xO4 catalysts were characterized by field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). The results showed that, as an oxide composite of Co and Mn elements, CoMn2O4 showed much stronger catalytic activity in peroxymonosulfate (PMS) oxidation than Co3O4, Mn2O3, and their physical mixture. Typically, the uses of 0.02 g/dm(3) CoMn2O4 and 0.2 g/dm(3) PMS yielded a nearly complete removal of Rhodamine B (0.03 g/dm(3)) in 80 min at 25 °C. The efficiency of Rhodamine B decomposition increased with increasing temperature (15-55 °C), but decreased with the increase of fulvic acid concentration (0-0.08 g/dm(3)). Furthermore, CoMn2O4 could maintain its catalytic activity in the repeated batch experiments. Moreover, HO· and SO4(·-) radicals participating in the process were evidenced using quenching experiments, and a rational mechanism was proposed. PMS oxidation with CoMn2O4 is an efficient technique for remediation of organic contaminants in wastewater.

One-pot approach for synthesis of N-doped TiO2/ZnFe2O4 hybrid as an efficient photocatalyst for degradation of aqueous organic pollutants

N-doped TiO2/ZnFe2O4 catalysts were successfully prepared by coupling nitrogen modified TiO2 with ZnFe2O4 via a one-pot vapor-thermal method. The physicochemical properties of the as-prepared catalysts have been characterized using various spectroscopic and microscopic techniques. The UV-vis-light-driven photocatalytic activities of the hybrids were evaluated and the effects of the amount of photocatalyst, different types of dyes, catalyst stability on photodegradation of organic dyes were investigated. Moreover, degradation kinetics and mechanism as well as the roles of N doping, ZnFe2O4 and TiO2 have been analyzed. It was revealed that N-doped TiO2/ZnFe2O4 exhibited an improved performance compared with TiO2/ZnFe2O4 or ZnFe2O4 because of the formation of a heterostructure at the interface as well as the introduction of N species. Active species such as holes, electrons, hydroxyl radicals, and superoxide radicals involved in the photodegradation process were detected by using different types of scavengers. Because of ZnFe2O4 in the hybrid, the catalyst shows ferromagnetism, and thus, the hybrid catalyst is easily isolated from the reaction mixture after the photocatalytic experiments. This work not only offers a simple method for the fabrication of N doped TiO2/ZnFe2O4 hybrids, but also provides an effective and conveniently recyclable photocatalyst for the purification of water.

Heterogeneous Fenton catalysts for the abatement of organic pollutants from aqueous solution: a review

Fenton processes have gained much attention in the field of wastewater treatment during recent years.

Decolorization of Acid Orange II dye by peroxymonosulfate activated with magnetic Fe3O4@C/Co nanocomposites

Magnetic Fe₃O₄@C/Co nanocomposites exhibited high efficiency and reusability in activation of PMS for decolorization of AO II solution.

Reduced graphene oxide anchored magnetic ZnFe2O4 nanoparticles with enhanced visible-light photocatalytic activity

A colloidal approach was developed to immobilize magnetic ZnFe₂O₄ onto simultaneously reduced GO toward the degradation of dyes under visible-light irradiation.