Mobilisation processes responsible for iron and manganese contamination of groundwater in Central Adriatic Italy

Evolution of river-aquifer disconnections and the migration and transformation of iron and manganese under non-time-varying/time-varying riverbed permeability

Changes in the composition, structure, and thickness of riverbed sediments caused by riverbed clogging strongly affect the hydraulic connection, migration and transformation of nutrients between river water and groundwater in groundwater source areas. However, previous studies have not extensively investigated the mechanisms of river-aquifer disconnection and the migration and transformation processes of iron and manganese under non-time-varying and time-varying conditions of riverbed permeability. This study developed a model using the COMSOL Multiphysics platform to characterize the riverbed clogging-groundwater exploitation-disconnection process, considering microbial growth and related biogeochemical processes, and investigated feedbacks between the reactive migration of iron and manganese and physical clogging-groundwater exploitation processes or bioclogging processes. The research findings showed that under non-time-varying conditions of riverbed permeability, the evolution of river-aquifer disconnection was strongly affected by the thickness and permeability coefficient of riverbed sediments. The dissolved oxygen attenuation rate in the disconnection zone decreased by up to 88.8 %. Additionally, the Mn2+ and Fe2+ generation rates in sediment pore water decreased by 65.8 % and 62.7 %, respectively. In contrast, during the riverbed bioclogging process, as the biofilms on the surface of the riverbed sediments developed, the sediment pores gradually clogged, leading to a significant reduction in the porosity and permeability coefficient. Consequently, the hydraulic connection between the river and aquifer transitioned from a saturated connection to a disconnection. However, reduced permeability due to riverbed bioclogging primarily controlled the release of Fe and Mn. When the river-aquifer was in complete disconnection, compared to the saturated connection state, the Mn2+ and Fe2+ generation rates increased by up to 5.8 and 3.8 times, respectively. This study deepens our understanding of the biogeochemical cycling mechanisms of Fe and Mn under riverbed clogging conditions in groundwater source areas and contributes to ensuring a secure and stable water supply in these areas.

Hydrodynamics and water quality of a highly anthropized wetland: the case study of the Massaciuccoli basin (Tuscany, Italy)

Owing to increasing anthropogenic impacts, wetlands have suffered a serious environmental decline in recent decades. The sustainable management of these natural resources is fundamental to maintain both the ecosystems and the economic activities. The Lake Massaciuccoli and nearby areas represent one of the largest residual coastal marshy areas in Tuscany (Italy). This wetland is characterized by large-scale and intensive agricultural use and affected by reclamation activities, with consequent problems of erosion, subsidence and lake eutrophication and siltation. In this context, an integrated study combining hydrochemical data (water levels, electrical conductivity, pH, turbidity, major ions, trace metals) and stable isotopes (H, O, S) has been performed in the southernmost part of the basin, to better disentangle processes and interactions between groundwater and surface water and to understand the origin of solutes and their evolution. Our results indicated that both groundwater and surface water have a meteoric origin and that geochemical composition of groundwater is mainly affected by local geological and biological processes. Moreover, surface water is affected by sea water mixing and evapotranspiration/precipitation processes. The impact of agricultural activity and the use of fertilizers on the water quality appears to be limited as regards nitrates, indicating that less intense agricultural practices implemented in recent years have been successful. As regards sulfates, Fe, and Mn, we cannot fully elucidate the mechanisms underlying human influence, but the oscillation of water level and degradation of peat enhanced by reclamation and agriculture activities likely played an important role in controlling the fate of these elements. Overall, these results underline the importance of integrated approaches to disentangle geochemical processes and will be useful in supporting policy implementation and environmental protection in this valuable area of Tuscany. Findings from this work suggest the need for policy-making authorities to take actions as soon as possible to mitigate risks. Closer co-operation is essential between authorities and farmers to reduce inputs of fertilizers and chemicals into the lake and the surrounding area. Also, additional policy measures should be enforced to reduce the mechanical soil tillage and limit erosion and runoff, such as the NBSs implemented within the Phusicos Project.

Small Community Water Systems Have the Highest Prevalence of Mn in Drinking Water in California, USA

Manganese (Mn) is currently regulated as a secondary contaminant in California, USA; however, recent revisions of the World Health Organization drinking water guidelines have increased regulatory attention of Mn in drinking water due to increasing reports of neurotoxic effects in infants and children. In this study, Mn concentrations reported to California's Safe Drinking Water Information System were used to estimate the potentially exposed population within California based on system size. We estimate that between 2011 and 2021, over 525,000 users in areas with reported Mn data are potentially exposed to Mn concentrations exceeding the WHO health-based guideline (80 μg L-1), and over 34,000 users are potentially exposed to Mn concentrations exceeding the U.S. Environmental Protection Agency health-advisory limit (300 μg L-1). Water treatment significantly decreased Mn concentrations compared to intake concentrations for all system sizes. However, smaller water systems have a wider range and a higher skew of Mn concentrations in finished water than larger systems. Additionally, higher Mn concentrations were found in systems above the maximum contaminant levels for chromium and arsenic. The treatment of these primary contaminants appears to also remove Mn. Lastly, data missingness remains a barrier to accurately assess public exposure to Mn in very small, small, and medium community water system-delivered water.

Manganese-Induced Parkinsonism: Evidence from Epidemiological and Experimental Studies

Manganese (Mn) exposure has evolved from acute, high-level exposure causing manganism to low, chronic lifetime exposure. In this latter scenario, the target areas extend beyond the globus pallidus (as seen with manganism) to the entire basal ganglia, including the substantia nigra pars compacta. This change of exposure paradigm has prompted numerous epidemiological investigations of the occurrence of Parkinson's disease (PD), or parkinsonism, due to the long-term impact of Mn. In parallel, experimental research has focused on the underlying pathogenic mechanisms of Mn and its interactions with genetic susceptibility. In this review, we provide evidence from both types of studies, with the aim to link the epidemiological data with the potential mechanistic interpretation.

Hydrogeochemistry and quality evaluation of groundwater and its impact on human health in North Tripura, India

Groundwater contamination becomes an alarming threat to the provision of ecosystem services and natural resources. A very high level of groundwater contamination has been observed in the northeastern states particularly in North Tripura district. Therefore, the present study considered the region as a case study to evaluate the hydrogeochemical facies, heavy metal pollution and irrigation indices, and their impact on human health. For the investigation, we have collected a total of 35 groundwater samples from North Tripura district. Hydrogeochemical facies through Piper plot reflect Ca²⁺-Mg²⁺-HCO₃^- and Na⁺-HCO₃^- as dominant water types. Gibbs plot identifies the dominance of rock-water interaction process in groundwater hydrochemistry. Geochemical plots indicate the dominance of silicate weathering, ion exchange and carbonate dissolution processes in groundwater mineralisation. The order of trace metal contaminations follows Fe > As > Zn > Mn > Cu > Pb. Results of heavy metal indices suggest above 80% samples are at high risk due to high Fe contamination. The risk of the heavy metal indices is associated with rising elevation in southern part of North Tripura. Findings of health risk assessment study imply that children face much carcinogenic and non-carcinogenic risks than adults because of unsafe levels of Fe and As. Multivariate statistical tools are applied to unravel interrelationships among all ions and trace metals as well as probable hydrogeochemical processes in groundwater. Results of Wilcox and USSL plots suggest 77% samples meet irrigation suitability criteria. Besides, the analysis suggests a better insight to identify hydrogeochemical processes controlling groundwater chemistry and the suitability of groundwater for irrigation and drinking purposes. The study also suggests treatment and sustainable management of groundwater resources is compulsory to reduce trace metal contaminations before public use.

Conditions and processes of precipitation of iron compounds upon discharge of high-mineralized artesian water from artesian borehole R-30, Staro Oryahovo, Bulgaria

The artesian borehole R-30-Staro Oryahovo with total depth of 1740 m gives waters of chlorine-sodium type with a mineralization of 31 g/L from formations of Paleogene age. These waters contain high concentrations of iron and because of this, intense precipitation of iron compounds takes place at and around the wellhead. To clarify the ongoing processes, samples of precipitates and overflow water were taken. It was shown that the predominant form of iron in the water before reaching the surface is Fe²⁺-85-90% and FeCl⁺-4-11%. The calculated saturation index for a number of Fe²⁺-containing minerals showed that hydroxides and sulfates of Fe²⁺ are the possible candidates for sources of iron in the water. The reductive dissolution of wide spread Fe³⁺-containing minerals (hematite, goethite) was assumed as a possible alternative process releasing Fe²⁺ into water. At the surface, due to the contacts with the atmospheric oxygen, the environment is sharply changed to oxidizing one thus forming a geochemical barrier and causing mass precipitation of Fe³⁺ oxides. Simultaneous Fe²⁺ oxidation, hydrolysis of Fe³⁺ and co-precipitation with silica and other components are assumed as the major processes causing the formation of low-crystalline Si-containing ferrihydrite or ferrihydrite-like phase. After formation, the precipitated gels due to the processes of aging and continued interaction with the outflowing water have suffered the further change including the formation of goethite. It was shown that due to the intensive precipitation processes, the iron migration to the surface is limited to a very small area and does not affect adjacent agricultural territories with Fe.

Fe and As geochemical self-removal dynamics in mineral waters: evidence from the Ferrarelle groundwater system (Riardo Plain, Southern Italy)

A theoretical pattern for Fe and As co-precipitation was tested directly in a groundwater natural system. Several monitoring wells were sampled to identify the different endmembers that govern the hydrodynamics of the Ferrarelle Groundwater System in the Riardo Plain (Southern Italy). In agreement with recent investigations, we found a mix of a deep and a shallow component in different proportions, resulting in a specific chemical composition of groundwater in each well depending on the percentages of each component. The shallow component was characterized by EC ~ 430 µS/cm, Eh ~ 300 mV, Fe ~ 0.06 µmol/L and As ~ 0.01-0.12 µmol/L, while the deep component was characterized by EC ~ 3400 µS/cm, Eh ~ 170 mV, Fe ~ 140 µmol/L and As ~ 0.59 µmol/L. A general attenuation of As and Fe concentration that was not due to a simple dilution effect was observed in the mixing process. The oxidation of Fe(II) to Fe(III) produces solid precipitates which adsorb As from solution and then co-precipitate. The reactions pattern of Fe(II) oxidation and As adsorption gave a linear function between [As] and [Fe], where the angular coefficient depends on the [O₂]/[H⁺] ratio. Chemical data obtained from our samples showed a very good agreement with this theoretical relationship. The investigated geochemical dynamics represented a natural process of attenuation of Fe and As, two undesirable elements that usually affect groundwater quality in volcanic aquifers in central-southern Italy, which are exploited to supply drinking water.

A multivariate non-parametric approach for estimating probability of exceeding the local natural background level of arsenic in the aquifers of Calabria region (Southern Italy)

The concept of natural background level (NBL) aims at distinguishing the natural and anthropogenic contributions to concentrations of specific contaminants, as groundwater management and protection tools. This is usually defined as a unique value at a regional scale, even when the hydrogeological and geochemical features of a certain territory are far from homogeneous. The concentration of target contaminants is affected by multiple hydrogeochemical processes. This is the case of arsenic in the Calabria region, where concentrations are definitely variable in groundwater. To overcome the limitation of a traditional approach and to include the intrinsic hydrogeological and geochemical heterogeneity into the definition of the natural contribution to As content in groundwater, an integrated probabilistic approach to the NBL assessment combining aquifer-based preselection criteria and multivariate non-parametric geostatistics was proposed. In detail, different NBL values were selected, based on the aquifer type and/or hydrogeochemical features. Then, these aquifer-based NBL values of arsenic were used in the Probability Kriging method to map the probability of exceedance and to provide contamination risk management tools. This multivariate geostatistical approach that takes advantage of the physico-chemical variables used in the aquifer-based NBL values definition allowed mapping the probability of exceedance of As in a physically-based way. The hydrogeochemical diversity of the study area and all the processes affecting As concentrations in the aquifers have been considered too. As a result, the obtained map was characterized by a short-range and long-range variability due to local hydrogeochemical anomalies and water-rock interaction and/or atmospheric precipitation. By this approach, the NBL exceedance probability maps proved to be less "noisy", because the local hydrogeochemical conditions were filtered, and more capable of pointing out anthropogenic inputs or very anomalous natural contributions, which need to be investigated more in detail and properly managed.

Influence of hydrogeochemical reactions along flow paths on contrasting groundwater arsenic and manganese distribution and dynamics across the Ganges River

The groundwater within the aquifers of the Ganges River delta exhibits significant spatial variability in concentrations of redox-sensitive solutes [e.g., arsenic (As), iron (Fe), manganese (Mn)]. The groundwater As and Mn concentrations show conspicuous contrasting distribution on the opposite banks of the Bhagirathi-Hooghly (B-H) River, the Indian distributary of the Ganges River. Here, we investigate the differences in hydrostratigraphic framework and groundwater evolutionary pathways across the B-H River that might have resulted in such variations. We developed a hydrostratigraphic model for the region and also used inverse reaction-path modeling along three hypothesized end-member flow paths to understand the dominant processes that might control As and Mn cycling within the aquifers. Our results indicate that the variability of As and Mn across the B-H River is a function of a complex interplay between the aquifer architecture, groundwater chemistry, and redox conditions.

Groundwater flow velocities in karst aquifers; importance of spatial observation scale and hydraulic testing for contaminant transport prediction

We review scale dependence of hydraulic conductivities and effective porosities for prediction of contaminant transport in four UK karst aquifers. Approaches for obtaining hydraulic parameters include core plug, slug, pumping and pulse tests, calibration of groundwater flow models and spring recession curves. Core plug and slug tests are unsuitable because they do not characterize a large enough volume to include a representative fracture network. Pumping test values match regional-scale hydraulic conductivities from flow modelling for the less intensively karstified aquifers: Magnesian Limestone, Jurassic Limestone and Cretaceous Chalks. Reliable bulk hydraulic conductivities were not available for the intensively karstified Carboniferous Limestone due to dominance of flow through pipe conduits in Mendips. Here, the only hydraulic conductivity value found from spring recession is one order of magnitude higher than that indicated by pumping tests. For all four carbonate aquifers, effective porosities assumed for transport modelling are two orders of magnitude higher than those found from tracer and hydrogeophysical tests. Thus, a combination of low hydraulic conductivities and assumed flowing porosities resulted in underestimated flow velocities. The UK karst aquifers are characterized by a range of hydraulic behaviours that fit those of karst aquifers worldwide. Indeed, underestimation of flow velocity due to inappropriate parameter selection is common to intensively karstified aquifers of southern France, north-western Germany and Italy. Similar issues arise for the Canadian Silurian carbonates where the use of high effective porosities (e.g. 5%) in transport models leads to underestimation of groundwater velocities. We recommend values in the range of 0.01-1% for such aquifers.

Application of water quality index and chemometric methods on contamination assessment in the shallow aquifer, Ganges River basin, India

Water quality index and chemometric methods were employed to assess the groundwater quality and contamination sources in the upper Ganges basin (UGB) and lower Ganges basin (LGB) as groundwater is a sole source for drinking, domestic and agricultural uses. Groundwater samples were collected from UGB (n = 44) and LGB (n = 26) and analysed for physicochemical parameters. Groundwater in this basin is desirable (51%) to permissible (TDS < 1000 mg/l, 96%) classes for drinking. Chemical constituents in the groundwater are lower than the maximum allowable limit recommended by the WHO for drinking except K. Drinking water quality index (DWQI) values reveal that groundwater belongs to excellent (89%) and good (10%) classes. However, the high concentrations of Fe and Mn in 61 and 77% of samples, respectively, restrict the usage for drinking according to USEPA recommendations. Both LGB and UGB groundwater in shallow wells have elevated concentration of TDS, EC and other ions (Ca²⁺, Cl^- and SO₄^2- in LGB; major ions, NO₃^-, PO₄^3-, F^-, Fe and Mn in UGB) and imply the influences of anthropogenic activities. Principal component analysis and hierarchical cluster analysis reiterated that groundwater quality is affected by the anthropogenic activities as well as mineral dissolutions (carbonate and silicate minerals). This study highlighted that the infiltration of wastewater from various contamination sources likely triggered the dissolution of the minerals in the vadose zone that resulted in the accumulation of ions in the shallow aquifer. An effective management plan is essential to protect this shallow aquifer.

Vulnerability of groundwater to iron and manganese contamination in the coastal alluvial plain of a developing Indonesian city

This paper evaluates environmental conditions responsible for the high concentrations of trace metals in Indonesian coastal groundwater. Indramayu, which has significant potential groundwater resources, but for which limited information is available regarding its vulnerability, is selected as our study area. Results show that Fe2+ and Mn2+ are natural contaminants in the groundwater of the study site. The correlations of trace metals with salinity and redox-sensitive parameters verify that saline water has a significant impact upon the dissolution of Fe and Mn. Furthermore, reductive condition is confirmed to be responsible for Fe and Mn dissolution with a less significant correlation compared to salinity. Moreover, the high concentrations of trace metals are coupled with high dissolved organic carbon (DOC), which indicates that reductive environment may arise because of organic-matter decomposition. Finally, the impact of human activity upon Fe and Mn dissolution is identified at the northern tip of Indramayu, where trace-metal contents are significantly elevated. Further, in the southern part, the groundwater condition is relatively more natural; thus, the impact of human activity upon the presence of Fe and Mn is lesser in this region.

Trace metals contamination in groundwater and implications on human health: comprehensive assessment using hydrogeochemical and geostatistical methods

Monitoring the groundwater chemical composition and identifying the presence of pollutants is an integral part of any comprehensive groundwater management strategy. The present study was conducted in a part of West Tripura, northeast India, to investigate the presence and sources of trace metals in groundwater and the risk to human health due to direct ingestion of groundwater. Samples were collected from 68 locations twice a year from 2016 to 2018. Mixed Ca-Mg-HCO3, Ca-Cl and Ca-Mg-Cl were the main groundwater types. Hydrogeochemical methods showed groundwater mineralization due to (1) carbonate dissolution, (2) silicate weathering, (3) cation exchange processes and (4) anthropogenic sources. Occurrence of faecal coliforms increased in groundwater after monsoons. Nitrate and microbial contamination from wastewater infiltration were apparent. Iron, manganese, lead, cadmium and arsenic were above the drinking water limits prescribed by the Bureau of Indian Standards. Water quality index indicated 1.5% had poor, 8.7% had marginal, 16.2% had fair, 66.2% had good and 7.4% had excellent water quality. Correlation and principal component analysis reiterated the sources of major ions and trace metals identified from hydrogeochemical methods. Human exposure assessment suggests health risk due to high iron in groundwater. The presence of unsafe levels of trace metals in groundwater requires proper treatment measures before domestic use.

State, source and triggering mechanism of iron and manganese pollution in groundwater of Changchun, Northeastern China

The present state of iron (Fe) and manganese (Mn) concentration in groundwater of Changchun city located within the Songnen Plain of northeastern China was evaluated in this study. Heavy metal sources, as well as triggering mechanism, were analyzed using a physicochemical, statistical and spatial approach. Results revealed that out of the 2600 samples analyzed, 214 (representing 8.24%) for Fe and 606 wells (representing 23.34%) for Mn exceeded the water standard. Organic matter-rich sediments and Fe-Mn nodules in aquifer and soil serve as sources of Fe and Mn. Organic and inorganic complex formations, as well as long residence time, were found to foster the release of Fe and Mn into groundwater. Additionally, pH and well depth was important in triggering Mn dissolution while groundwater mineralization, depth to the water table and well proximity to the river were found to have minimal/negligible effect on heavy metal mobilization. The removal of Fe and Mn from the water before use was proposed along with the sinking of deeper wells for groundwater exploitation to limit the use of polluted water.

Hydrogeochemical baseline in a human-altered landscape of the central Pacific coast of Costa Rica

Groundwater pollution in tropical and human-altered coastal landscapes is receiving novel attention due to decreasing in annual recharge as a consequence of recurrent droughts and overexploitation, whereby saline intrusion, point and diffuse source contamination, and water conflicts are common denominators. This study presents a detailed groundwater evaluation in a coastal aquifer within the central Pacific coast of Costa Rica. Three sampling campaigns including major ions, heavy metals, and fecal coliform analyses were conducted between July 2013 and March 2014 across 17 wells within the alluvial and fissured units of the Jacó aquifer. The groundwater system is classified as mixed HCO₃^--Ca²⁺-Mg²⁺ type. Coliforms presence was found in two wells, nearby Mona Creek headwaters and near the coastal line. Heavy metal concentrations were below quantification limits in most of the wells; however, chromium concentrations up to 6.56 μg/L were quantified within the coastal line and central portion of the alluvial aquifer in 20 out of the 48 samples. The spatial distribution of major ions (K⁺, Na⁺, Ca²⁺, Mg²⁺, Cl^-, SO₄^2-, and HCO₃^-) exhibited an increasing trend towards the central portion of the alluvial aquifer, which may be potentially associated with the large unregulated urban expansion, invoking a need of a continuous water quality monitoring program in this touristic hot spot. This study provides useful information for other similar coastal aquifers in Central America, whereby increasing population growth and unregulated touristic, industrial, and agricultural activities are posing a truly challenge to ensure water security and sustainability parallel to the economic development in a changing climate.

Regional rainfall threshold maps drawn through multivariate geostatistical techniques for shallow landslide hazard zonation

The Empirical Rainfall Thresholds (ERTs) for shallow landslide initiation are commonly devised worldwide mostly to be implemented within landslide early warning systems. Nonetheless, since the pioneering works on ERTs in the 1980s, only meteorological variables - that are cumulated E or intensity I and duration D values of rainfalls that are likely to trigger landslides - have been used to predict landslide occurrence, even though they are characterized by a large uncertainty. Over time, many efforts have been devoted to constrain ERT to geo-morphological characters of the landslide locations but, since nowadays, they did not get to a sound new method to derive ERT and strengthen its ability to forecast future rainfall-induced landslide. In this study, local geo-morphological characters have been taken into account by means of the co-kriging technique to constrain the E and D mean values of a regional ERT and their confidence intervals. The study area, where the proposed method was trained, is the hilly side of the Abruzzo region (Italy). Here, 62 shallow landslides have been analyzed in the time span of 2013-2017 by collecting 62 (D,E) pairs related to the rainfalls that were likely to trigger them. The relevant geo-morphological features for the considered territory have been selected through the principal component analysis. Then, the Multi-Collocated Co-Kriging technique, through ISATIS Geovariances software, has been applied to derive the spatial variability structures of E and D values conditioned by the selected geo-morphological parameters. Therefore, threshold values of E and D and their confidence intervals have been calculated generating a new shape of regional ERT, consisting of maps of continuous estimated threshold values of (D,E) and confidence interval values suitable for being used in early warning systems for shallow landslide initiation.

Advanced redox zonation of the San Pedro Sula alluvial aquifer (Honduras) using data fusion and multivariate geostatistics

The incorrect wastewater management and the land use distribution lead to severe environmental problems, creating heavy eutrophication condition in surface-water; when surface-water/groundwater relationships exist, the organic matter transferred to the aquifer oxidizes and triggers redox processes (i.e. Terminal Electron Accepting Processes, TEAPs), that provoke severe groundwater quality modifications and complicate its exploitation and management. For this reason, the definition of the redox zonation within an aquifer is an effective tool for the identification of the contamination sources and for the conceptual model refinement, when remediation strategies need to be planned. Although the redox processes are dynamic reactions, the aquifer redox zonation is generally aimed to identify homogenous zones, characterized by a predominant TEAP. To overcome this methodological approach, the Multi-Collocated Factorial Kriging (MCFK) was applied to redox-related physico-chemical parameters, which allowed identifying their spatial relationships at different scales, transferring this method from precision agriculture and soil science to hydrogeochemistry. The selected study area is the San Pedro Sula aquifer (Honduras), a multi-layer alluvial aquifer characterized by well-known surface-water/groundwater interactions and heavy eutrophicated streams. Here, high concentrations of Mn and Fe were found in the aquifer. The MCFK results identified a short-range (2300 m) factor, highlighting a strong relation between Mn concentrations and anoxic conditions, due to the organic matter transfer from eutrophicated surface-water into the aquifer. Simultaneously, the relationship between Fe and turbidity is related to a fine Fe(III) oxi-hydroxide colloidal phase, developed when different redox conditions of groundwater mix up in the wells. The long-range (6000 m) factor points out that Fe is related to redox processes at a wider scale, especially in the northern San Pedro Sula alluvial plain. These results are supported by both the Principal Component Analysis and the hydrogeochemical numerical modeling. As a result, different TEAPs occur simultaneously in contaminated areas, acting at multiple scales.

Prediction of contaminant transport in fractured carbonate aquifer types: a case study of the Permian Magnesian Limestone Group (NE England, UK)

Viruses and bacteria which are characterized by finite lives in the subsurface are rapidly transported via fractures and cavities in fractured and karst aquifers. Here, we demonstrate how the coupling of a robust outcrop characterization and hydrogeophysical borehole testing is essential for prediction of contaminant velocities and hence wellhead protection areas. To show this, we use the dolostones of the Permian Magnesian Limestone aquifer in NE England, where we incorporated such information in a groundwater flow and particle tracking model. Within this aquifer, flow in relatively narrow (mechanical aperture of ~ 10-1-1 mm) fractures is coupled with that in pipe cavities (~ 0.20-m diameter) following normal faults. Karstic cavities and narrow fractures are hydraulically very different. Thus, the solutional features are represented within the model by a pipe network (which accounts for turbulence) embedded within an equivalent porous medium representing Darcian flowing fractures. Incorporation of fault conduits in a groundwater model shows that they strongly influence particle tracking results. Despite this, away from faulted areas, the effective flow porosity of the equivalent porous medium remains a crucial parameter. Here, we recommend as most appropriate a relatively low value of effective porosity (of 2.8 × 10-4) based on borehole hydrogeophysical testing. This contrasts with earlier studies using particle tracking analyses on analogous carbonate aquifers, which used much higher values of effective porosity, typically ~ 102 times higher than our value, resulting in highly non-conservative estimates of aquifer vulnerability. Low values of effective flow porosities yield modelled flow velocities ranging from ~ 100 up to ~ 500 m/day in un-faulted areas. However, the high fracturing density and presence of karstic cavities yield modelled flow velocities up to ~ 9000 m/day in fault zones. The combination of such flow velocities along particle traces results in 400-day particle traces up to 8-km length, implying the need for large well protection areas and high aquifer vulnerability to slowly degrading contaminants.

Detection of the natural origin hydrocarbon contamination in carbonate aquifers (central Apennine, Italy)

The water-rock interaction is discussed in this study for some Central Apennine aquifers and their relative springs, where the geological and hydrogeological setting is potentially responsible for hydrocarbon contamination. The contamination is related to the presence of limestone formations with high organic content that are connected to the genesis of hydrocarbons in the Central-Southern Apennines. Thanks to a multidisciplinary approach based on a seasonal monitoring of hydrogeological, hydrogeochemical, organic chemical, and isotopic variables, and to a detailed geological analysis, it was possible to demonstrate that the bituminous schists within the bituminous dolomite formation (a Triassic Formation presents in the Gran Sasso acquifer), the bituminous intercalations within the Bolognano Formation (an Olocenic calcareous Formation in the Majella acquifer), and the petroleum-saturated rocks of the Bolognano Formation (in the Morrone acquifer) are all able to leach hydrocarbons into groundwater. The results suggest that more detailed studies are required for areas where lithologies with fossil organic components are present. Insights should further investigate the interaction between groundwater and rocks in terms of organic compounds as well as inorganic compounds. In particular, the study also suggests that the supplementary quantification of hydrocarbon compounds in bituminous rock and the leaching tests are analyses that provide reliable results. From the normative point of view, the results of the study can be useful when dealing with hydrocarbon contamination resulting from anthropogenic activities within catchments where formations with high concentration of organic matter are present. In these cases, it will possible to assess the natural background concentrations and review the threshold values upwards.

Electrochemical removal and recovery of iron from groundwater using non-corrosive electrodes

Iron contamination in groundwater has attracted much attention from environmentalists and government agencies because it can cause many problems in human life and in industrial and agricultural activities when groundwater is directly used without any treatment. This study aims to investigate the electrochemical oxidation of Fe(II) to Fe(III) and recovery of insoluble Fe(III) using non-corrosive graphite electrode which serves as a controllable, low-cost, low maintenance and virtually unlimited electron acceptor for Fe(II) oxidation. The lab-scale results indicated that Fe(II) removal up to 100% was obtained at an applied voltage higher than 2 V. The Fe(II) removal efficiency was linearly increased with the increase of potential supply in the range of 1-4 V in the salinity 0.5%. The Fe(II) removal rate could no longer be enhanced at the applied potential higher than 8 V in the condition without salinity. The results from SEM-EDS and XRD revealed that Fe was recovered as FeOOH by conventional filtration with a recovery efficiency of 82.7-92.1%. The electrochemical Fe(II) removal might be an alternative for the conventional method of the in situ Fe removal from groundwater. Besides, the recovered FeOOH can be used as a raw material for environmental remediation and pigment industry.

Dynamics of natural contamination by aluminium and iron rich colloids in the volcanic aquifers of Central Italy

The dynamics of natural contamination by Al and Fe colloids in volcanic aquifers of central-southern Italy were investigated. Localized perched aquifers, and their relative discharges, are strongly affected by the presence of massive suspended solids, which confer a white-lacteous coloration to the water. This phenomenon occasionally caused the interruption of water distribution due to the exceeding of Al and Fe concentrations in aquifers exploited for human supply. The cause was ascribed to water seepage from perched aquifers. Water discharges affected by such contamination was investigated for the Rocca Ripesena area (north-eastern sector of Vulsini Volcanic District) and for the Rianale Stream Valley (Roccamonfina Volcanic Complex). Hydrogeological survey of both areas confirmed the presence of perched aquifers not previously considered due to their low productivity. Pluviometric data and chemical parameters were periodically monitored. Water mineralization decreased with increasing rainfall, conversely Al and Fe concentrations increased. Statistical analysis confirmed the dependence of all the chemical variables on rock leaching, with the sole exception of Al and Fe which were imputed to colloids mobilization from local, strongly pedogenized pyroclastic material. The similarities in hydrogeological settings and mobilization dynamics in both areas suggest that the Al and Fe colloidal contamination should be more abundant than currently known in quaternary volcanic areas.