A simulation research on the natural degradation process of tetrabromobisphenol A in soil under the atmospheric different environments

Analysis of tetrabromobisphenol A and bisphenol A in plant sample-method optimization and identification of the derivatives

Tetrabromobisphenol A (TBBPA) is the most abundant brominated flame retardant and bisphenol A (BPA) is often identified as the metabolic product of TBBPA. Both of them are highly bioconcentrated and show serious biological toxicity. In this study, an analytical method was optimized to simultaneously determine TBBPA and BPA in plant samples. Moreover, the uptake and metabolism of TBBPA in maize were investigated through hydroponic exposure experiment. The whole analysis procedure included ultrasonic extraction, lipid removal, purification by solid-phase extraction cartridge, derivatization, and detection by GC/MS. Optimizations were conducted for each pretreatment step above. After improvement, methyl tert-butyl ether (MTBE) was chosen as the extraction solvent; the lipid removal was conducted by repartition between organic solvent and alkaline solution. The best suitable pH condition is 2-2.5 for the inorganic solvent before used for further purification by HLB and silica column with the optimized elute solvent of acetone and mixtures of acetone and hexane (1:1), respectively. The recoveries of TBBPA and BPA spiked in maize samples were 69±4% and 66±4% with the relative standard deviation less than 5%, respectively, for the entire treatment procedure. Limits of detections were 4.10 ng/g and 0.13 ng/g for TBBPA and BPA in plant samples, respectively. In the hydroponic exposure experiment (100 μg/L, 15 d), the concentrations of TBBPA in maize cultivated in pH 5.8 and pH 7.0 Hoagland solutions were 1.45 and 0.89 μg/g in roots and 8.45 and 6.34 ng/g in stems, while they were all below the detection limit for leaves, respectively. The distribution of TBBPA in different tissues was as the following order: root>>stem>leaf, illustrating the accumulation in the root and the translocation to the stem. The uptake variations under different pH conditions were attributed to the change of TBBPA species, now that it shows greater hydrophobicity at lower pH condition as a kind of ionic organic contaminant. Monobromobisphenol A and dibromobisphenol A were identified as metabolisms products of TBBPA in maize. The efficiency and simplicity of the method that we proposed characterize its potential application as a screening tool for environmental monitoring and contribute to a comprehensive study of the environmental behavior of TBBPA.

The photoactivity of complexation of DOM and copper in aquatic system: Implication on the photodegradation of TBBPA

The photoactivity of dissolved organic matter (DOM) has a great impact on the photodegradation of organic pollutants in natural waters. In this study, the photodegradation of TBBPA was investigated under simulated sunlight irradiation in the presence of copper ion (Cu²⁺), dissolved organic matter (DOM) and Cu-DOM complexation (Cu-DOM) to illustrate the effect of Cu²⁺ on photoactivity of DOM. The rate of photodegradation of TBBPA in the presence of Cu-DOM complex was 3.2 times higher than that in pure water. The effects of Cu²⁺, DOM and Cu-DOM on the photodegradation of TBBPA were highly pH dependent and hydroxyl radical(·OH) responded for the acceleration effect. Spectral and radical experiments indicated that Cu²⁺ had high affinity to fluorescence components of DOM, and acted as both the cation bridge and electron shuttle, resulting the aggregation of DOM and increasing of steady-state concentration of ·OH (·OH_ss). Simultaneously, Cu²⁺ also inhibited intramolecular energy transfer leading to the decrease of steady-state concentration singlet oxygen (¹O_2ss) and triplet of DOM (³DOM^⁎_ss). The interaction between Cu²⁺ and DOM followed the order of conjugated carbonyl CO, COO^- or CO stretching in phenolic groups and carbohydrate or alcoholic CO groups. With these results, a comprehensive investigation on the photodegradation of TBBPA in the presence of Cu-DOM was conducted, and the effect of Cu²⁺ on the photoactivity of DOM was illustrated. These findings helped to understanding the potential mechanism of interaction among metal cation, DOM and organic pollutants in sunlit surface water, especially for the DOM-induced photodegradation of organic pollutants.

Mixed bromine/chlorine transformation products of tetrabromobisphenol A: Potential specific molecular markers in e-waste dismantling areas

Mixed bromine/chlorine transformation products (Cl_yBr_xBPAs) of tetrabromobisphenol A (TBBPA) were recently identified for the first time in an electronic waste (e-waste) dismantling site. To determine whether these compounds can be used as specific molecular markers of e-waste dismantling activities, the environmental occurrences and distributions of TBBPA and its transformation products including debromination products (Br_xBPAs) and Cl_yBr_xBPAs were analyzed in soil samples from three sites in China: Guiyu (an e-waste site), Qingyuan (a former e-waste site now mainly used for old wire and cable recycling), and Shouguang (a flame retardant production base). Levels of the target analytes in Guiyu were significantly higher than in Qingyuan and Shouguang. Br_xBPAs and Cl_yBr_xBPAs were widely detected in Guiyu at concentrations between 1 and 4 orders of magnitude lower than their parent compound TBBPA. The highest concentration was found in an e-waste dismantling park, with lower concentrations in surrounding area. The levels of Cl_yBr_xBPAs in Qingyuan were much lower, indicating that the Cl_yBr_xBPAs may come from the processing of wires and cables, but not rule out the incubation on their own in soils. None of Cl_yBr_xBPAs were detected in Shouguang. Cl_yBr_xBPAs may thus be useful as specific molecular markers for determining the intensity of e-waste dismantling activities.

Recycling of plastic waste: Screening for brominated flame retardants (BFRs)

Flame retardants are chemicals vital for reducing risks of fire and preventing human casualties and property losses. Due to the abundance, low cost and high performance of bromine, brominated flame retardants (BFRs) have had a significant share of the market for years. Physical stability on the other hand, has resulted in dispersion and accumulation of selected BFRs in the environment and receiving biota. A wide range of plastic products may contain BFRs. This affects the quality of waste plastics as secondary resource: material recycling may potentially reintroduce the BFRs into new plastic product cycles and lead to increased exposure levels, e.g. through use of plastic packaging materials. To provide quantitative and qualitative data on presence of BFRs in plastics, we analysed bromophenols (tetrabromobisphenol A (TBBPA), dibromophenols (2,4- and 2,6-DBP) and 2,4,6-tribromophenol (2,4,6-TBP)), hexabromocyclododecane stereoisomers (α-, β-, and γ-HBCD), as well as selected polybrominated diphenyl ethers (PBDEs) in samples of household waste plastics, virgin and recycled plastics. A considerable number of samples contained BFRs, with highest concentrations associated with acrylonitrile butadiene styrene (ABS, up to 26,000,000ngTBBPA/g) and polystyrene (PS, up to 330,000ng∑HBCD/g). Abundancy in low concentrations of some BFRs in plastic samples suggested either unintended addition in plastic products or degradation of higher molecular weight BFRs. The presence of currently restricted flame retardants (PBDEs and HBCD) identified in the plastic samples illustrates that circular material flows may be contaminated for extended periods. The screening clearly showed a need for improved documentation and monitoring of the presence of BFRs in plastic waste routed to recycling.