Influences of graphene oxide on biofilm formation of gram-negative and gram-positive bacteria

Effects of Graphene-Based Nanomaterials on Microorganisms and Soil Microbial Communities

The past decades have witnessed intensive research on the biological effects of graphene-based nanomaterials (GBNs) and the application of GBNs in different fields. The published literature shows that GBNs exhibit inhibitory effects on almost all microorganisms under pure culture conditions, and that this inhibitory effect is influenced by the microbial species, the GBN's physicochemical properties, the GBN's concentration, treatment time, and experimental surroundings. In addition, microorganisms exist in the soil in the form of microbial communities. Considering the complex interactions between different soil components, different microbial communities, and GBNs in the soil environment, the effects of GBNs on soil microbial communities are undoubtedly intertwined. Since bacteria and fungi are major players in terrestrial biogeochemistry, this review focuses on the antibacterial and antifungal performance of GBNs, their antimicrobial mechanisms and influencing factors, as well as the impact of this effect on soil microbial communities. This review will provide a better understanding of the effects of GBNs on microorganisms at both the individual and population scales, thus providing an ecologically safe reference for the release of GBNs to different soil environments.

Evaluation of the effect of graphene oxide-based nanocomposites on smear layer by a scanning electron microscope: Laboratory investigation

This study is to examine the effect of graphene oxide (GO) and GO-based nanocomposites (GO_EDTA, GO_CHIT) on the smear layer by scanning electron microscopy (SEM). Sixty human single-rooted anterior teeth were used. Samples were randomly categorised into six groups. Distilled water in group 1, 17% EDTA in group 2, chitosan (CHIT) solution in group 3, GO solution in group 4, GO_EDTA solution in group 5 and GO_CHIT in group 6 were used as irrigation solutions. Photomicrographs were acquired from the coronal, middle and apical parts of the samples by SEM. Statistical analyses were performed using Kruskal-Wallis, Mann-Whitney U and Wilcoxon tests. There was a statistically significant difference among the groups (p < 0.003). Adding GO to CHIT and EDTA did not affect removing the smear layer in all segments (p < 0.003). Incorporating GO into EDTA and CHIT solutions did not change their interaction with the smear layer.

Environmental biotechnology and the involving biological process using graphene-based biocompatible material

Biotechnology is a promising approach to environmental remediation but requires improvement in efficiency and convenience. The improvement of biotechnology has been illustrated with the help of biocompatible materials as biocarrier for environmental remediations. Recently, graphene-based materials (GBMs) have become promising materials in environmental biotechnology. To better illustrate the principle and mechanisms of GBM application in biotechnology, the comprehension of the biological response of microorganisms and enzymes when facing the GBMs is needed. The review illustrated distinct GBM-microbe/enzyme composites by providing the GBM-microbe/enzyme interaction and the determining factors. There are diverse GBM modifications for distinct biotechnology applications. Each of these methods and applications depends on the physicochemical properties of GBMs. The applications of these composites were mainly categorized as pollutant adsorption, anaerobic digestion, microbial fuel cells, and organics degradation. Where information was available, the strategies and mechanisms of GBMs in improving application efficacies were also demonstrated. In addition, the biological response, from microbial community changes, extracellular polymeric substances changes to biological pathway alteration, may become important in the application of these composites. Furthermore, we also discuss challenges facing the environmental application of GBMs, considering their fate and toxicity in the ecosystem, and offer potential solutions. This research significantly enhances our comprehension of the fundamental principles, underlying mechanisms, and biological pathways for the in-situ utilization of GBMs.

Strategies to Mitigate Biofouling of Nanocomposite Polymer-Based Membranes in Contact with Blood

An extracorporeal blood purification method called continuous renal replacement therapy uses a porous hollow-fiber polymeric membrane that is exposed to prolonged contact with blood. In that condition, like with any other submerged filtration membrane, the hemofilter loses its properties over time and use resulting in a rapid decline in flux. The most significant reason for this loss is the formation of a biofilm. Protein, blood cells and bacterial cells attach to the membrane surface in complex and fluctuating processes. Anticoagulation allows for longer patency of vascular access and a longer lifespan of the membrane. Other preventive measures include the modification of the membrane itself. In this article, we focused on the role of nanoadditives in the mitigation of biofouling. Nanoparticles such as graphene, carbon nanotubes, and silica effectively change surface properties towards more hydrophilic, affect pore size and distribution, decrease protein adsorption and damage bacteria cells. As a result, membranes modified with nanoparticles show better flow parameters, longer lifespan and increased hemocompatibility.

Graphene oxide affects bacteriophage infection of bacteria by promoting the formation of biofilms

Graphene oxide (GO) is increasingly used in a range of fields, such as electronics, biosensors, drug delivery, and water treatment, and the likelihood of its release into the environment is increasing correspondingly. GO is involved in the formation of biofilms and leads bacteria to over proliferate, but the effects of GO on bacteriophage infection remain unexplored. We noted bacterial overgrowth in experiments when GO was used to treat the bacterial culture medium, leading us to question whether bacterial proliferation caused by GO affects phage infection of target bacteria. Treating Pseudomonas aeruginosa with GO at a low dosage (0.02 mg/mL) led to biofilm expansion in LB medium. Biofilm formation in the presence of GO affected the ability of bacteriophages to kill bacteria and reproduce. Similarly, the presence of GO deposits increased the ratio of bacteria to phage, providing a favorable environment for bacterial growth. Additionally, increasing the positive electrical charge in the culture environment inhibited the rejection of bacteriophages by negatively charged GO, improving phage reproduction. Finally, adding GO to sewage in imitation field experiments significantly increased the bacterial diversity and richness in the sewage, stimulating a significant increase in the variety and number of bacteria. Collectively, these results indicate that GO hinders phage infection by providing a bacterial refuge. The results of this study provide valuable insights into how GO interacts with bacteriophages to explore the effects on bacterial growth.

A peptide of PilZ domain-containing protein controls wastewater-treatment-membrane biofouling by inducing bacterial attachment

Membrane-based wastewater reclamation is used to mitigate water scarcity; however, irreversible biofouling is an elusive problem that hinders the efficiency of a forward-osmosis (FO) membrane-based process, and the protein responsible for fouling is unknown. Herein, we identified fouling proteins by analyzing the microbiome and proteome of wastewater extracellular polymeric substances responsible for strong irreversible FO-membrane fouling. The IGLSSLPR peptide of a PilZ domain-containing protein was found to recruit bacterial attachment when immobilized on the membrane surface while suppressing it when dissolved, in a similar manner to the Arg-Gly-Asp (RGD) peptide in mammalian cell cultures. Bacteria adhere to IGLSSLPR and poly-l-lysine-coated membranes with similar energies and exhibit water fluxes that decline similarly, which is ascribable to interaction as strong as electrostatic interactions in the peptide-coated membranes. We conclude that IGLSSLPR is the key domain responsible for membrane fouling and can be used to develop antifouling technology against bacteria, which is similar to the current usage of RGD peptide in mammalian cell cultures.

Curcumin-Functionalized Graphene Oxide Strongly Prevents Candida parapsilosis Adhesion and Biofilm Formation

Candida parapsilosis is the major non-C. albicans species involved in the colonization of central venous catheters, causing bloodstream infections. Biofilm formation on medical devices is considered one of the main causes of healthcare-associated infections and represents a global public health problem. In this context, the development of new nanomaterials that exhibit anti-adhesive and anti-biofilm properties for the coating of medical devices is crucial. In this work, we aimed to characterize the antimicrobial activity of two different coated-surfaces, graphene oxide (GO) and curcumin-graphene oxide (GO/CU) for the first time, against C. parapsilosis. We report the capacity of GO to bind and stabilize CU molecules, realizing a homogenous coated surface. We tested the anti-planktonic activity of GO and GO/CU by growth curve analysis and quantification of Reactive Oxigen Species( ROS) production. Then, we tested the antibiofilm activity by adhesion assay, crystal violet assay, and live and dead assay; moreover, the inhibition of the formation of a mature biofilm was investigated by a viability test and the use of specific dyes for the visualization of the cells and the extra-polymeric substances. Our data report that GO/CU has anti-planktonic, anti-adhesive, and anti-biofilm properties, showing a 72% cell viability reduction and a decrease of 85% in the secretion of extra-cellular substances (EPS) after 72 h of incubation. In conclusion, we show that the GO/CU conjugate is a promising material for the development of medical devices that are refractory to microbial colonization, thus leading to a decrease in the impact of biofilm-related infections.

Iris pseudacorus as precursor affecting ecological transformation of graphene oxide and performance of constructed wetland

The role of plants is largely unknown in constructed wetlands (CWs) exposed to phytotoxic nanomaterials. Present study investigated transformation of graphene oxide (GO) and performance of CWs with Iris pseudacorus as precursor. GO was trapped by CWs without dependence on plants. GO could move to lower substrate layer and present increases on defects/disorders with stronger effects in planted CW. Before adding GO, planted CW achieved better removal both of phosphorus and nitrogen. After adding GO, phosphorus removal in planted CW was 93.23-95.71% higher than 82.55-90.07% in unplanted CW. However, total nitrogen removal was not improved, showing 48.20-56.66% and 53.44-56.04% in planted and unplanted CWs. Plant improved urease, phosphatase, and arylsulfatase, but it decreased β-glucosidase and had less effects on dehydrogenase and catalase. Pearson correlation matrix revealed that plant enhanced microbial interaction with high degree of positive correlation. Moreover, there were obvious shifts in microbial community at phylum and genus level, which presented closely positive action on substrate enzyme activities. The functional profile was less affected due to functional redundancy in microbial system, but time effects were obvious in CWs, especially in planted CW. These findings could provide the basis on understanding role of plants in CWs for treating nanoparticles wastewater.

Recent advances in carbon-based nanomaterials for combating bacterial biofilm-associated infections

The prevalence of bacterial pathogens among humans has increased rapidly and poses a great threat to health. Two-thirds of bacterial infections are associated with biofilms. Recently, nanomaterials have emerged as anti-biofilm agents due to their enormous potential for combating biofilm-associated infections and infectious disease management. Among these, relatively high biocompatibility and unique physicochemical properties of carbon-based nanomaterials (CBNs) have attracted wide attention. This review presented the current advances in anti-biofilm CBNs. Different kinds of CBNs and their physicochemical characteristics were introduced first. Then, the various potential mechanisms underlying the action of anti-biofilm CBNs during different stages were discussed, including anti-biofouling activity, inhibition of quorum sensing, photothermal/photocatalytic inactivation, oxidative stress, and electrostatic and hydrophobic interactions. In particular, the review focused on the pivotal role played by CBNs as anti-biofilm agents and delivery vehicles. Finally, it described the challenges and outlook for the development of more efficient and bio-safer anti-biofilm CBNs.

Effects of three graphene-based materials on the growth and photosynthesis of Brassica napus L

The environmental safety and threats of graphene-based materials (GBMs) to the agroecosystem have attracted increasing attention in recent years. However, the mechanisms underlying the effects of GBMs on plants remain unclear. Here, we investigated the phytotoxicity of reduced graphene oxide (RGO), graphene oxide (GO) and amine-functionalized graphene (G-NH2) on Brassica napus L. The results revealed that RGO impaired photosynthesis mainly by decreasing the chlorophyll content and Rubisco activity. A further gene-level analysis suggested that this effect of RGO might be due to its toxicity on sulfate transmembrane transporter and nitrogen metabolism, which ultimately led to nutrient imbalance. However, GO directly damaged the photosystem by disrupting the chloroplast structure, and a decrease in Rubisco activity indicated that GO also inhibits carbon fixation. Further gene-level analysis demonstrated that GO has toxicity on the chloroplast membrane, photosystem, photosynthethic electron transport and F-type ATPase. In addition, G-NH2 at 10-1000 mg L-1 showed no significant toxicity. These findings shed light on the potential mechanism for the toxicity of GBMs on plants for risk assessment.

Response of constructed wetland for wastewater treatment to graphene oxide: Perspectives on plant and microbe

The wide application of graphene oxide (GO) increases its release into environment with less known on environmental effects. This work investigated 120-day interaction between GO (500 and 5000 μg/L) and constructed wetlands (CWs) planted with Iris pseudacorus. CWs showed the effective retention for GO via mature biofilm but less biodegradation. GO significantly induced enzyme activities (urease, neutral phosphatase, and catalase), which was attributed to increases in ecological association and enzyme abundance. GO decreased microbial biomass on day 30, but it had no impacts on day 120. The microbial community showed gradual self-adaption with time due to protection of antioxidant defense system (L-ascorbate oxidase, superoxide reductase, and glutathione related enzyme). The antioxidant enzymes (superoxide dismutase and peroxidase) and lipid peroxidation of Iris pseudacorus were increased by GO, accompanied by reduction on chlorophyll biosynthesis. Overall, the separate effects of GO on micro-regions and individual bodies in CWs were obvious, but it was acceptable that variations in pollutant removal were not evident due to synergetic role of plant-substrate-microbe. Organic matter and phosphorus removals reached to above 93%, and ammonia and total nitrogen removals in GO groups were reduced by 7-8% and 9-13%, respectively.

Synthesis and Characterization of Sulfur and Sulfur-Selenium Nanoparticles Loaded on Reduced Graphene Oxide and Their Antibacterial Activity against Gram-Positive Pathogens

Resistance to antimicrobial agents in Gram-positive bacteria has become a major concern in the last decade. Recently, nanoparticles (NP) have emerged as a potential solution to antibiotic resistance. We synthesized three reduced graphene oxide (rGO) nanoparticles, namely rGO, rGO-S, and rGO-S/Se, and characterized them using X-ray diffraction (PXRD), Raman analysis, and thermogravimetric analysis. Transmission electron microscopy confirmed spherical shape nanometer size S and S/Se NPs on the rGO surface. Antibacterial properties of all three nanomaterials were probed against Gram-positive pathogens Staphylococcus aureus and Enterococcus faecalis, using turbidometeric and CFU assays. Among the synthesized nanomaterials, rGO-S/Se exhibited relatively strong antibacterial activity against both Gram-positive microorganism tested in a concentration dependent manner (growth inhibition >90% at 200 μg/mL). Atomic force microscopy of rGO-S/Se treated cells displayed morphological aberrations. Our studies also revealed that rGO composite NPs are able to deposit on the bacterial cell surface, resulting in membrane perturbation and oxidative stress. Taken together, our results suggest a possible three-pronged approach of bacterial cytotoxicity by these graphene-based materials.

Graphene oxide-rhodamine nanocomposite for picomolar detection of chromium(III) by fluorimetry and its biofilm inhibition

Graphene oxide-rhodamine B hydrazide (GO-RhB) nanocomposite was prepared by a simple chemical method and characterized by various spectroscopic and analytical techniques. GO-RhB nanocomposite potentially detects Cr³⁺ ion (excitation/emission = 550 nm/572 nm) via fluorescence turn "on-off" approach. This composite showed high binding affinity (10⁶ M^-1) with Cr³⁺ and a+ limit of detection (LOD) down to picomolar concentration (LOD = 85.6 pM). As far as we know, this is the first report for the sensing of Cr³⁺ ion at picomolar concentration. GO-RhB selectively senses Cr³⁺ ion without any interference of other coexisting metal ions. In addition, this composite exhibited the dynamic nature of quenching in the presence of Cr³⁺ ion, which is confirmed by the Stern-Volmer plot, fluorescence temperature profiles, and decay time experiments. The GO-RhB nanocomposite-based fluorescent probe was successfully applied to the quantitative detection of Cr³⁺ ion in milk sample (linear range = 2 to 10 nM) with better performance than other existing methods. Besides, this GO-RhB composite showed better antibiofilm activity against Acinetobacter baumannii and methicillin-resistant Staphylococcus aureus (MRSA) by using the Congo red agar and tube method.

Renewable Carbon Nanomaterials: Novel Resources for Dental Tissue Engineering

Dental tissue engineering (TE) is undergoing significant modifications in dental treatments. TE is based on a triad of stem cells, signaling molecules, and scaffolds that must be understood and calibrated with particular attention to specific dental sectors. Renewable and eco-friendly carbon-based nanomaterials (CBMs), including graphene (G), graphene oxide (GO), reduced graphene oxide (rGO), graphene quantum dots (GQD), carbon nanotube (CNT), MXenes and carbide, have extraordinary physical, chemical, and biological properties. In addition to having high surface area and mechanical strength, CBMs have greatly influenced dental and biomedical applications. The current study aims to explore the application of CBMs for dental tissue engineering. CBMs are generally shown to have remarkable properties, due to various functional groups that make them ideal materials for biomedical applications, such as dental tissue engineering.

Antibiofouling Activity of Graphene Materials and Graphene-Based Antimicrobial Coatings

Microbial adhesion and biofilm formation is a common, nondesirable phenomenon at any living or nonliving material surface in contact with microbial species. Despite the enormous efforts made so far, the protection of material surfaces against microbial adhesion and biofilm formation remains a significant challenge. Deposition of antimicrobial coatings is one approach to mitigate the problem. Examples of such are those based on heparin, cationic polymers, antimicrobial peptides, drug-delivering systems, and other coatings, each one with its advantages and shortcomings. The increasing microbial resistance to the conventional antimicrobial treatments leads to an increasing necessity for new antimicrobial agents, among which is a variety of carbon nanomaterials. The current review paper presents the last 5 years' progress in the development of graphene antimicrobial materials and graphene-based antimicrobial coatings that are among the most studied. Brief information about the significance of the biofouling, as well as the general mode of development and composition of microbial biofilms, are included. Preparation, antibacterial activity, and bactericidal mechanisms of new graphene materials, deposition techniques, characterization, and parameters influencing the biological activity of graphene-based coatings are focused upon. It is expected that this review will raise some ideas for perfecting the composition, structure, antimicrobial activity, and deposition techniques of graphene materials and coatings in order to provide better antimicrobial protection of medical devices.

Graphene-Based Nanomaterials Modulate Internal Biofilm Interactions and Microbial Diversity

Graphene-based nanomaterials (GBMs), such as graphene oxide (GO) and reduced graphene oxide (rGO), possess unique properties triggering high expectations for the development of new technological applications and are forecasted to be produced at industrial-scale. This raises the question of potential adverse outcomes on living organisms and especially toward microorganisms constituting the basis of the trophic chain in ecosystems. However, investigations on GBMs toxicity were performed on various microorganisms using single species that are helpful to determine toxicity mechanisms but fail to predict the consequences of the observed effects at a larger organization scale. Thus, this study focuses on the ecotoxicological assessment of GO and rGO toward a biofilm composed of the diatom Nitzschia palea associated to a bacterial consortium. After 48 and 144 h of exposure to these GBMs at 0, 0.1, 1, and 10 mg.L⁻¹, their effects on the diatom physiology, the structure, and the metabolism of bacterial communities were measured through the use of flow cytometry, 16S amplicon sequencing, and Biolog ecoplates, respectively. The exposure to both of these GBMs stimulated the diatom growth. Besides, GO exerted strong bacterial growth inhibition as from 1 mg.L⁻¹, influenced the taxonomic composition of diatom-associated bacterial consortium, and increased transiently the bacterial activity related to carbon cycling, with weak toxicity toward the diatom. On the contrary, rGO was shown to exert a weaker toxicity toward the bacterial consortium, whereas it influenced more strongly the diatom physiology. When compared to the results from the literature using single species tests, our study suggests that diatoms benefited from diatom-bacteria interactions and that the biofilm was able to maintain or recover its carbon-related metabolic activities when exposed to GBMs.

Antibacterial and antibiofilm properties of graphene and its derivatives

Infections resulting from bacteria and biofilms have become a huge problem threatening human health. In recent years, the antibacterial and antibiofilm effects of graphene and its derivatives have been extensively studied. However, there continues to be some controversy over whether graphene and its derivatives can resist infection and biofilms. Moreover, the antibacterial mechanism and cytotoxicity of graphene and its derivatives are unclear. In the present review, antibacterial and antibiofilm abilities of graphene and its derivatives in solution, on the surface are reviewed, and their toxicity and possible mechanisms are also reviewed. Furthermore, we propose possible future development directions for graphene and its derivatives in antibacterial and antibiofilm applications.

A bifunctionalized NiCo2O4-Au composite: Intrinsic peroxidase and oxidase catalytic activities for killing bacteria and disinfecting wound

A NiCo₂O₄-Au composite was fabricated following the calcination-reduction method and testified to exhibit the intrinsic high peroxidase- and oxidase-like activities. The composite could activate a low level of H₂O₂ (100 μM) to kill E. coli and S. aureus. NiCo₂O₄-Au composite could be easily separated by an external magnet from the media and reused several times. NiCo₂O₄-Au composite could also effectively damage the existing biofilms and prevent the formation of new biofilms. The electron spin resonance tests showed that NiCo₂O₄-Au composite catalyzed H₂O₂ into reactive oxygen species (ROS), mainly including OH, O₂^-, and ¹O₂; while the oxidase-like activity of NiCo₂O₄-Au also stemmed from the ROS formation in the absence of H₂O₂. The radical trapping experiment confirmed that OH and ¹O₂ were the main radicals in the antibacterial process for NiCo₂O₄-Au in the presence of H₂O₂. A NiCo₂O₄-Au based Band-Aid was also designed, which exhibited high anti-infective and wound-healing properties. This study has demonstrated that NiCo₂O₄-Au composite can be a promising antibacterial agent in environmental and clinical applications.

Graphene: An Antibacterial Agent or a Promoter of Bacterial Proliferation?

Graphene materials (GMs) are being investigated for multiple microbiological applications because of their unique physicochemical characteristics including high electrical conductivity, large specific surface area, and robust mechanical strength. In the last decade, studies on the interaction of GMs with bacterial cells appear conflicting. On one side, GMs have been developed to promote the proliferation of electroactive bacteria on the surface of electrodes in bioelectrochemical systems or to accelerate interspecies electron transfer during anaerobic digestion. On the other side, GMs with antibacterial properties have been synthesized to prevent biofilm formation on membranes for water treatment, on medical equipment, and on tissue engineering scaffolds. In this review, we discuss the mechanisms and factors determining the positive or negative impact of GMs on bacteria. Furthermore, we examine the bacterial growth-promoting and antibacterial applications of GMs and debate their practicability.

Graphene Oxide Coatings as Tools to Prevent Microbial Biofilm Formation on Medical Device

The clinical challenge on surface engineering of medical devices to prevent microorganisms adhesion and biofilm formation, has become an essential aspect for medical implants. Antibacterial properties of Graphene Oxide (GO) have been demonstrated across a broad spectrum of bacteria, and the different mechanisms of action with which this nanomaterial interacts with the microbial surface have been elucidated in detail. Innovative protective coatings based on graphene film and hydrogel could represent an innovative solution for the prevention of nosocomial pathogens colonization on implantable device. This brief review mainly focuses on the applications of graphene in nanomedicine with a particular deepening on the antibacterial properties of GO and GO-based nanomaterials. In order to evaluate the possible future applications of GO as an anti-biofilm coating material for medical devices, studies on the ability of graphene coated surface to prevent microbial adhesion are also discussed. A concise review on in vitro toxicity and in vivo safety is also presented.

Anti-pathogenic activity of graphene nanomaterials: A review

Graphene and its derivatives are promising candidates for a variety of biological applications, among which, their anti-pathogenic properties are highly attractive due to the outstanding physicochemical characteristics of these novel nanomaterials. The antibacterial, antiviral and antifungal performances of graphene are increasingly becoming more important due to the pathogen's resistance to existing drugs. Despite this, the factors influencing the antibacterial activity of graphene nanomaterials, and consequently, the mechanisms involved are still controversial. This review aims to systematically summarize the literature, discussing various factors that affect the antibacterial performance of graphene materials, including the shape, size, functional group and the electrical conductivity of graphene flakes, as well as the concentration, contact time and the pH value of the graphene suspensions used in related microbial tests. We discuss the possible surface and edge interactions between bacterial cells and graphene nanomaterials, which cause antibacterial effects such as membrane/oxidative/photothermal stresses, charge transfer, entrapment and self-killing phenomena. This article reviews the anti-pathogenic activity of graphene nanomaterials, comprising their antibacterial, antiviral, antifungal and biofilm-forming performance, with an emphasis on the antibacterial mechanisms involved.

Graphene Oxide affects Staphylococcus aureus and Pseudomonas aeruginosa dual species biofilm in Lubbock Chronic Wound Biofilm model

Chronic wound management becomes a complex procedure because of the persistence of forming biofilm pathogens that do not respond to antimicrobial treatment. The aim of this paper is to detect the Graphene Oxide-GO effect on Staphylococcus aureus and Pseudomonas aeruginosa dual species wound biofilm in Lubbock Chronic Wound Biofilm-LCWB model. LCWB is a recognized model that mimics the spatial microbial colonization into chronic wounds and reproduces the wound and its clot. Staphylococcus aureus PECHA 10 and P. aeruginosa PECHA 4, are the pathogens used in the study. The GO effect on both in forming and mature biofilms, is detected by the evaluation of the CFU/mg reduction, the cell viability and ultrastructural analysis of the treated LCWBs. Graphene Oxide, at 50 mg/l, shows a significant antibiofilm effect in forming and mature LCWBs. In particular, during the biofilm formation, GO reduces the S. aureus and P. aeruginosa growth of 55.05% ± 4.73 and 44.18% ± 3.91 compared to the control. In mature biofilm, GO affects S. aureus and P. aeruginosa by reducing their growth of 70.24% ± 4.47 and 63.68% ± 17.56, respectively. Images taken by SEM show that GO display a disaggregated microbial effect also disrupting the fibrin network of the wound-like biofilm framework. In conclusion, GO used against microorganisms grown in LCWB, displays a significant inhibitory action resulting in a promising tool for potential application in wound management.

In situ investigation of acute exposure of graphene oxide on activated sludge: Biofilm characteristics, microbial activity and cytotoxicity

Graphene Oxide (GO) has wide applications in many fields which has caused a large expected quantity of the graphene-based wastes. It is necessary to understand the toxic effects of the GO on the activated sludge (AS) considering its inevitable discharge to the wastewater treatment plants as the ultimate repositories for these wastes. In this study, the acute exposures of the multilayer Nano-graphene oxide (MNGO) at different dosages were conducted in order to investigate its integrated effects on the formation of the biofilm, mature biofilm and the microbial activity of the activated sludge. Raman spectroscopy and laser scanning confocal microscopy (LSCM) were adopted for the in-situ characterization of the biofilm with the exposure of the MNGO. The results showed that the activated sludge was tolerable to the acute exposure of the less than 100 mg/L of the MNGO, especially for the mature biofilm, and only a subtle decrease was found in the size and thickness during the formation of the biofilm, while the amount of 300 mg/L of the MNGO caused the sever deterioration on the activated sludge system. The microbial metabolic activity, viability, and the biological removal of the nutrients were significantly affected with the more than 100 mg/L of the MNGO. It was also demonstrated by the microbial cytotoxicity tests that the increase in the exposure of the MNGO was related to the increase in the reactive oxygen species (ROS) and the damaging degree of the cell membrane.

Adding nutrients to the biocontrol strain JK-SH007 promotes biofilm formation and improves resistance to stress

Burkholderia pyrrocinia JK-SH007 is an important biocontrol strain for the prevention and treatment of poplar canker disease. Its powerful biocontrol function is inseparable from its successful colonization of poplar trees. Bacterial biofilms can ensure the long-term colonization of a host. To explore the mechanism of action of biofilms in the biocontrol process, we manipulated various exogenous factors to explore the morphology of the JK-SH007 biofilm in vitro. The addition of glycerol and MgSO₄ to TSB medium stimulated biofilm production, increased the resistance of JK-SH007 to disease, enhanced the survival of JK-SH007 in nutrient-poor environments and maintained the antagonistic ability of JK-SH007 against the poplar canker pathogen. Therefore, we constructed and optimized a biofilm-forming system to produce a large number of stable JK-SH007 biofilms. The optimized system showed that the optimal incubation time for JK-SH007 biofilm formation was 14 h, the optimal temperature of the static culture was 25 °C, and the optimal pH was 5. The optimal medium for biofilm formation was TSB medium, 1% glycerol and 50 mM MgSO₄. RT-qPCR experiments showed that an increase in the expression of the suhB gene promoted JK-SH007 biofilm formation, while an increase in the expression level of the ropN gene inhibited JK-SH007 biofilm formation. The possible mechanism by which JK-SH007 was inhibited by biofilm formation under natural culture was revealed. These results indicate the importance of adding nutrients to JK-SH007 biocides produced on a commercial scale. This is the first report of JK-SH007 producing a long-lasting biofilm that guarantees antagonism.

Antibacterial effect of graphene oxide (GO) nano-particles against Pseudomonas putida biofilm of variable age

Graphene oxide (GO) has been reported to possess antibacterial activity; therefore, its accumulation in the environment could affect microbial communities such as biofilms. The susceptibility of biofilms to antimicrobials is known to depend on the stage of biofilm maturity. The aim of this study was to investigate the effect of GO nano-particles on Pseudomonas putida KT2440 biofilm of variable age. FT-IR, UV-vis, and Raman spectroscopy confirmed the oxidation of graphene while XPS confirmed the high purity of the synthesised GO over 6 months. Biofilms varying in maturity (24, 48, and 72 h) were formed using a CDC reactor and were treated with GO (85 μg/mL or 8.5 μg/mL). The viability of P. putida was monitored by culture on media and the bacterial membrane integrity was assessed using flow cytometry. P. putida cells were observed using confocal microscopy and SEM. The results showed that GO significantly reduced the viability of 48-h biofilm and detached biofilm cells associated with membrane damage while the viability was not affected in 24- and 72-h biofilms and detached biofilm cells. The results showed that susceptibility of P. putida biofilm to GO varied according to age which may be due to changes in the physiological state of cells during maturation. Graphical abstract.

Corneal Biofilm Plaques: A Novel Clinical Presentation

PURPOSE

To report a novel clinical presentation of corneal biofilms, consisting of formation of superficial and recurrent corneal plaques.

METHODS

Interventional case report. A 9-year-old boy presented with subepithelial, whitish, avascular, and recurrent corneal plaques without any clinical manifestations of active corneal inflammation and/or infection. He had a history of minor ocular trauma; otherwise, his medical history was unremarkable.

RESULTS

An excisional biopsy was performed under topical anesthesia. Histological analysis identified these plaques as clusters of gram-negative bacilli surrounded by an extracellular matrix. Samples were further evaluated with special stains (calcofluor white, Flamingo fluorescent dye, propidium iodide, and Gomori-Grocott) that demonstrated biofilm structures.

CONCLUSIONS

Corneal plaques are a very rare clinical presentation of corneal biofilms that allow prolonged survival of microorganisms even in the absence of prosthetic material and clinical signs or symptoms of corneal active inflammation and/or infection.

Recent advances in antibacterial applications of metal nanoparticles (MNPs) and metal nanocomposites (MNCs) against multidrug-resistant (MDR) bacteria

Introduction: In recent years, multidrug resistance (MDR) in bacteria has drastically increased and has posed a great threat to the human health. This problem has generated an urgent need to search alternatives for the treatment of MDR bacteria. It has been proved that metal nanoparticles (MNPs) and metal nanocomposites (MNCs) possess remarkable antimicrobial potential, and hence can be used in alternative therapy. Areas covered: This review is aimed to discuss recent reports on antibacterial activities of MNPs and MNCs against MDR bacteria. Expert opinion: Escherichia coli, Staphylococcus aureus, Pseudomonas aeruginosa, Acinetobacter baumannii, Klebsiella pneumoniae, Serratia marcescens, Streptococcus pneumoniae, and Staphylococcus epidermidis are important pathogenic bacteria which have shown MDR against a wide range of conventional antibiotics. In this context, effects of MNPs and MNCs on these pathogens have demonstrated considerable efficacy. Several mechanisms concerning activity of MNPs and MNCs against pathogenic bacteria which are mainly dependent on type of their precursors and treated bacterium have been investigated. In addition, many studies have been made on antibacterial activities of these nanomaterials with similar and different results.

The effects of graphene and mesenchymal stem cells in cutaneous wound healing and their putative action mechanism

This study provides a review of the therapeutic potential of graphene dressing scaffolds and mesenchymal stem cells (MSCs) and their synergistic effects with respect to cutaneous wound healing. This study also considers their putative action mechanism based on the antibacterial, immunomodulating, angiogenic, matrix remodeling effects of materials belonging to the graphene family and MSCs during the wound healing process. In addition, this study discusses the cytocompatibility of graphene, its uses as a platform for skin substitutes, the properties it possesses with respect to providing protection against microbial invasion as well as strategies aimed at minimizing the chance of the occurrence of sepsis. MSCs are capable of secreting several factors that exert a therapeutic impact on reparative processes and tissue regeneration. In light of experiments conducted to date, graphene combined with MSCs appears to have the potential to enhance both the wound healing process and infection control at the injury site.

The advanced role of carbon quantum dots in nanomedical applications

Carbon quantum dots (CQDs) have emerged as a potential material in the diverse fields of biomedical applications due to their numerous advantageous properties including fluorescence, water solubility, biocompatibility, low toxicity, small size and ease of modification, inexpensive scale-up production, and versatile conjugation with other nanoparticles. Thus, CQDs became a preferable choice in various biomedical applications such as nanocarriers for drugs, therapeutic genes, photosensitizers, and antibacterial molecules. Further, their potentials have also been verified in multifunctional diagnostic platforms, cellular and bacterial bio-imaging, development of theranostics nanomedicine, etc. This review provides a concise insight into the progress and evolution in the field of CQD research with respect to methods/materials available in bio-imaging, theranostics, cancer/gene therapy, diagnostics, etc. Further, our discussion is extended to explore the role of CQDs in nanomedicine which is considered to be the future of biomedicine. This study will thus help biomedical researchers in tapping the potential of CQDs to overcome various existing technological challenges.

High loads of nano-hydroxyapatite/graphene nanoribbon composites guided bone regeneration using an osteoporotic animal model

BACKGROUND

It has been difficult to find bioactive compounds that can optimize bone repair therapy and adequate osseointegration for people with osteoporosis. The nano-hydroxyapatite (nHAp)/carbon nanotubes with graphene oxides, termed graphene nanoribbons (GNR) composites have emerged as promising materials/scaffolds for bone regeneration due to their bioactivity and osseointegration properties. Herein, we evaluated the action of nHAp/GNR composites (nHAp/GNR) to promote bone regeneration using an osteoporotic model.

MATERIALS AND METHODS

First, three different nHAp/GNR (1, 2, and 3 wt% of GNR) were produced and characterized. For in vivo analyses, 36 Wistar rats (var. albinus, weighing 250-300 g, Comissão de Ética no Uso de Animais [CEUA] n.002/17) were used. Prior to implantation, osteoporosis was induced by oophorectomy in female rats. After 45 days, a tibial fracture was inflicted using a 3.0-mm Quest trephine drill. Then, the animals were separated into six sample groups at two different time periods of 21 and 45 days. The lesions were filled with 3 mg of one of the above samples using a curette. After 21 or 45 days of implantation, the animals were euthanized for analysis. Histological, biochemical, and radiographic analyses (DIGORA method) were performed. The data were evaluated through ANOVA, Tukey test, and Kolmogorov-Smirnov test with statistical significance at P<0.05.

RESULTS

Both nHAp and GNR exhibited osteoconductive activity. However, the nHAp/GNR exhibited regenerative activity proportional to their concentration, following the order of 3% >2% >1% wt.

CONCLUSION

Therefore, it can be inferred that all analyzed nanoparticles promoted bone regeneration in osteoporotic rats independent of analyzed time.

Hydrophobicity of graphene as a driving force for inhibiting biofilm formation of pathogenic bacteria and fungi

OBJECTIVE

To evaluate the surface and wettability characteristics and the microbial biofilm interaction of graphene coating on titanium.

METHODS

Graphene was deposited on titanium (Control) via a liquid-free technique. The transfer was performed once (TiGS), repeated two (TiGD) and five times (TiGV) and characterized by AFM (n=10), Raman spectroscopy (n=10), contact angle and SFE (n=5). Biofilm formation (n=3) to Streptococcus mutans, Enterococcus faecalis, Pseudomonas aeruginosa and Candida albicans was evaluated after 24h by CV assay, CFU, XTT and confocal microscopy. Statistics were performed by one-way Anova, Tukey's tests and Pearson's correlation analysis at a pre-set significance level of 5 %.

RESULTS

Raman mappings revealed coverage yield of 82 % for TiGS and ≥99 % for TiGD and TiGV. Both TiGD and TiGV presented FWHM>44cm^-1 and I_D/I_G ratio<0.12, indicating multiple graphene layers and occlusion of defects. The contact angle was significantly higher for TiGD and TiGV (110° and 117°) comparing to the Control (70°). The SFE was lower for TiGD (13.8mN/m) and TiGV (12.1mN/m) comparing to Control (38.3mN/m). TiGD was selected for biofilm assays and exhibited significant reduction in biofilm formation for all microorganisms compared to Control. There were statistical correlations between the high contact angle and low SFE of TiGD and decreased biofilm formation.

SIGNIFICANCE

TiGD presented high quality and coverage and decreased biofilm formation for all species. The increased hydrophobicity of graphene films was correlated with the decreased biofilm formation for various species.

Graphene oxide coatings prevent Candida albicans biofilm formation with a controlled release of curcumin-loaded nanocomposites

AIM

Fabrication of graphene oxide (GO)-based medical devices coatings that limit adhesion of Candida albicans, a main issue of healthcare-associated infections.

METHODS

The GO composites noncovalently functionalized with curcumin (CU), a hydrophobic molecule with active antimicrobial action, polyethylene glycol (PEG) that hinders the absorption of biomolecules or a combination of CU and PEG (GO-CU-PEG) were drop-casted on surfaces and antifungal efficacy was assessed.

RESULTS

We demonstrate that GO-CU-PEG coatings can reduce fungal adhesion, proliferation and biofilm formation. Furthermore, in an aqueous environment, surfaces release curcumin-PEG nanocomposites that have a minimum inhibitory concentration of 9.25 μg/ml against C. albicans.

CONCLUSION

Prevention of early cell adhesion and creation of a proximal environment unfavorable for growth make these GO-supported biomaterials attractive for innovative medical device manufacturing.

Carbon Nanomaterials for Treating Osteoporotic Vertebral Fractures

PURPOSE OF REVIEW

To identify the use of carbon nanomaterials in bone regeneration and present new data on the regenerative capacity of bone tissue in osteopenic rats treated with graphene nanoribbons (GNRs).

RECENT FINDINGS

The results show that the physical and chemical properties of the nanomaterials are suitable for the fabrication of scaffolds intended for bone regeneration. The in vitro tests suggested a non-toxicity of the GNRs as well as improved biocompatibility and bone mineralization activity. Here, for the first time, we evaluated the potential of GNRs in remodeling and repairing bone defects in osteoporotic animal models in vivo. Interestingly, bone mineralization and the initiation of the remodeling cycle by osteoclasts/osteoblasts were observed after the implantation of GNRs, thus implying healthy bone remodeling when using GNRs. This study, therefore, has opened our perspectives and certainly calls for more attention to the use of carbon nanomaterials for a wide range of osteoporosis applications.

Graphene-Based Nanomaterials for Tissue Engineering in the Dental Field

The world of dentistry is approaching graphene-based nanomaterials as substitutes for tissue engineering. Apart from its exceptional mechanical strength, electrical conductivity and thermal stability, graphene and its derivatives can be functionalized with several bioactive molecules. They can also be incorporated into different scaffolds used in regenerative dentistry, generating nanocomposites with improved characteristics. This review presents the state of the art of graphene-based nanomaterial applications in the dental field. We first discuss the interactions between cells and graphene, summarizing the available in vitro and in vivo studies concerning graphene biocompatibility and cytotoxicity. We then highlight the role of graphene-based nanomaterials in stem cell control, in terms of adhesion, proliferation and differentiation. Particular attention will be given to stem cells of dental origin, such as those isolated from dental pulp, periodontal ligament or dental follicle. The review then discusses the interactions between graphene-based nanomaterials with cells of the immune system; we also focus on the antibacterial activity of graphene nanomaterials. In the last section, we offer our perspectives on the various opportunities facing the use of graphene and its derivatives in associations with titanium dental implants, membranes for bone regeneration, resins, cements and adhesives as well as for tooth-whitening procedures.