ZIF-8 derived nitrogen-doped porous carbon as metal-free catalyst of peroxymonosulfate activation

Design of Environmental-Friendly Carbon-Based Catalysts for Efficient Advanced Oxidation Processes

Advanced oxidation processes (AOPs) represent one of the most promising strategies to generate highly reactive species to deal with organic dye-contaminated water. However, developing green and cost-effective catalysts is still a long-term goal for the wide practical application of AOPs. Herein, we demonstrated doping cobalt in porous carbon to efficiently catalyze the oxidation of the typically persistent organic pollutant rhodamine B, via multiple reactive species through the activation of peroxymonosulfate (PMS). The catalysts were prepared by facile pyrolysis of nanocomposites with a core of cobalt-loaded silica and a shell of phenolic resin (Co-C/SiO2). It showed that the produced 1O2 could effectively attack the electron-rich functional groups in rhodamine B, promoting its molecular chain breakage and accelerating its oxidative degradation reaction with reactive oxygen-containing radicals. The optimized Co-C/SiO2 catalyst exhibits impressive catalytic performance, with a degradation rate of rhodamine B up to 96.7% in 14 min and a reaction rate constant (k) as high as 0.2271 min-1, which suggested promising potential for its practical application.

Advances in Atomically Dispersed Metal and Nitrogen Co-Doped Carbon Catalysts for Advanced Oxidation Technologies and Water Remediation: From Microenvironment Modulation to Non-Radical Mechanisms

Atomically dispersed metal and nitrogen co-doped carbon catalysts (M-N-C) have been attracting tremendous attentions thanks to their unique MNx active sites and fantastic catalytic activities in advanced oxidation technologies (AOTs) for water remediation. However, precisely tailoring the microenvironment of active sites at atomic level is still an intricate challenge so far, and understanding of the non-radical mechanisms in persulfate activation exists many uncertainties. In this review, latest developments on the microenvironment modulation strategies of atomically dispersed M-N-C catalysts including regulation of central metal atoms, regulation of coordination numbers, regulation of coordination heteroatoms, and synergy between single-atom catalysts (SACs) with metal species are systematically highlighted and discussed. Afterwards, progress and underlying limitations about the typical non-radical pathways from production of singlet oxygen, electron transfer mechanism to generation of high-valent metal species are well demonstrated to inspire intrinsic insights about the mechanisms of M-N-C/persulfate systems. Lastly, perspectives for the remaining challenges and opportunities about the further development of carbon-based SACs in environment remediation are also pointed out. It is believed that this review will be much valuable for the further design of active sites in M-N-C/persulfate catalytic systems and promote the wide application of SACs in various fields.

A confined expansion pore-making strategy to transform Zn-MOF to porous carbon nanofiber for water treatment: Insight into formation and degradation mechanism

Electrospinning MOFs nanoparticles derived porous carbon nanofibers with rational structure and design are recently as environmentally friendly and highly efficient catalytic materials for wastewater treatment. However, most of the pore-making strategies are based on precursors structural shrinkage during pyrolysis, which is a challenge to create abundant large pores and open channels. Here, a confined expansion pore-making strategy with active MOF is introduced, where energetic Zn-MOF (Zn2+/triazole) and ZIF-67 (Co2+/dimethylimidazole) are utilized as pore forming additive and precursor of active sites, respectively. The high nitrogen content gives triazole the ability to puff up and realizes N-doped during pyrolysis. Moreover, degradation mechanisms and pathways of pollutants were measured by 3D EEM, LC-MS, quenching experiments, and Fukui function. This pore-making strategy via energetic MOF local contraction and expansion provides a novel method to prepare diversiform function porous carbon materials for environmental remediation.

Co-based MOF heterogeneous catalyst for the efficient degradation of organic dye via peroxymonosulfate activation

In this study, a new cobalt-based metal-organic framework (JLNU-500), [Co2(OH)(PBA)(AIP)]·3DMA·0.75H2O (4-(pyridin-4-yl) benzoic acid (HPBA), 5-aminoisophthalic acid (H2AIP) and N,N-dimethylacetamide (DMA)), was fabricated using a solvothermal method. JLNU-500 has 3D network architecture with 1D nanopore channels. The prepared JLNU-500 can activate peroxymonosulfate (PMS) for Rhodamine B (RhB) dye decolorization. Interestingly, catalyst JLNU-500 exhibited high efficiency for PMS activation, and nearly 100% (above 99.8%) removal of RhB with a high concentration (50.0 mg L-1, 100 mL) was achieved within 6 min. The reaction rate constant of the JLNU-500/PMS system was 1.02 min-1 calculated based on the pseudo-first-order kinetics, which is higher than that of the other reported catalysts. Furthermore, the factors, which could influence PMS activation were also investigated, such as PMS dosage, catalyst dosage, pollutant RhB concentration, reaction temperature and solution pH. More importantly, the radical trapping experiments ferreted out that sulfate (SO4˙-) and hydroxyl (˙OH) radicals were the dominating oxidants in the removal of RhB. Moreover, the possible degradation mechanism was elucidated. This study provides new prospects for fabricating new MOFs that can potentially be employed for high-efficiency catalytic oxidation as heterogeneous catalysts.

Facile Fabrication of Wood-Derived Porous Fe3C/Nitrogen-Doped Carbon Membrane for Colorimetric Sensing of Ascorbic Acid

Fe3C nanoparticles hold promise as catalysts and nanozymes, but their low activity and complex preparation have hindered their use. Herein, this study presents a synthetic alternative toward efficient, durable, and recyclable, Fe3C-nanoparticle-encapsulated nitrogen-doped hierarchically porous carbon membranes (Fe3C/N-C). By employing a simple one-step synthetic method, we utilized wood as a renewable and environmentally friendly carbon precursor, coupled with poly(ionic liquids) as a nitrogen and iron source. This innovative strategy offers sustainable, high-performance catalysts with improved stability and reusability. The Fe3C/N-C exhibits an outstanding peroxidase-like catalytic activity toward the oxidation of 3,3',5,5'-tetramethylbenzidine in the presence of hydrogen peroxide, which stems from well-dispersed, small Fe3C nanoparticles jointly with the structurally unique micro-/macroporous N-C membrane. Owing to the remarkable catalytic activity for mimicking peroxidase, an efficient and sensitive colorimetric method for detecting ascorbic acid over a broad concentration range with a low limit of detection (~2.64 µM), as well as superior selectivity, and anti-interference capability has been developed. This study offers a widely adaptable and sustainable way to synthesize an Fe3C/N-C membrane as an easy-to-handle, convenient, and recoverable biomimetic enzyme with excellent catalytic performance, providing a convenient and sensitive colorimetric technique for potential applications in medicine, biosensing, and environmental fields.

3D N-doped carbon derived from zeolitic imidazole framework as heterogeneous catalysts for decomposition of pulp and paper mill effluent: Optimization and kinetics study

Three specific catalysts, namely ZIF-67 (zeolitic imidazolate framework-67), Co@NCF (Co@Nitrogen-Doped Carbon Framework), and 3D NCF (Three-Dimensional Nitrogen-Doped Carbon Framework), were prepared and studied for pulp and paper mill effluent degradation using heterogeneous activation of peroxymonosulfate (PMS). Numerous characterizations, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and N2 adsorption, were used to characterize the properties of three different catalysts. 3D NCF is remarkably effective at heterogeneous activation of PMS to generate sulfate radicals to degrade pulp and paper mill effluent (PPME) compared to the other as-prepared catalysts. The catalytic activity reveals a sequence of 3D NCF > Co@NCF > ZIF-67.3D NCF could degrade organic pollutants in 30 min at an initial COD concentration of 1146 mg/L of PPME, 0.2 g/L catalysts, 2 g/L PMS, and 50 °C. Consequently, it was observed that the degradation of PPME using 3D NCF followed first-order kinetics, with an activation energy of 40.54 kJ mol-1. Overall, 3D NCF/PMS system reveals promising performance for PPME removal.

Research progress of metal-organic framework-based material activation of persulfate to degrade organic pollutants in water

The rapid development of industry in recent years has led to the introduction of serious pollutants into water bodies, and there is an urgent need for efficient organic degradation technologies. At present, selective peroxynitrite (PS) oxidation (SR-AOPs) is an effective way to treat pollutants in water bodies, and it is necessary to select a suitable material for the activation of peroxynitrite. Metal-organic frameworks (MOFs), with their tunable structure, large specific surface area, and tunable ligand molecules exhibit excellent reactivity and catalytic performance in the activation of persulfate. With MOF-based materials for PS activation as a novel advanced oxidation technology, this study reviews MOFs and their composites and derived materials. The current research status of activated persulfate for the treatment of organic pollutants in water, the influence of different systems on the degradation performance are discussed, and the activation and degradation mechanisms are discussed; the problems of the above materials in the degradation of organic pollutants are summarized, and research directions based on the coupled activated persulfate system of MOF materials are proposed.

Metal-Organic Framework-Derived N-Doped Porous Carbon for a Superprotonic Conductor at above 100 °C

The development of proton conductors capable of working at above 100 °C is of great significance for proton exchange membrane electrolysis cells (PEMECs) and proton exchange membrane fuel cells (PEMFCs) but remains to be an enormous challenge to date. In this work, we demonstrate for the first time that the N-doped porous carbon derived from metal-organic frameworks (MOFs) with great superiority can be exploited for high-performing proton conductors at above 100 °C. Through the pyrolysis of ZIF-8, the N-doped porous carbon (ZIF-8-C) featuring high chemical resistance to Fenton's reagent was readily prepared and then served as a robust host to accommodate H₃PO₄ molecules for proton transport. Upon impregnation with H₃PO₄, the resulting PA@ZIF-8-C exhibits low water swelling and high proton conduction of over 10^-2 S cm^-1 at a temperature above 100 °C, which is superior to many reported proton conductors. This work provides a new approach for the design of high-performing proton conductors at above 100 °C.

Fe, Ni-modified ZIF-8 as a tensive precursor to derive N-doped carbon as Na and Li-ion batteries anodes

Carbon materials derived from metal-organic frameworks have attracted increasing attention as anodes for energy storage. In this study, Fe, Ni-doped ZIF-8 is carbonized at high temperature to obtain bimetallic Fe and Ni modified tension -relaxed carbon (FeNi@trC). Fe and Ni have opposite structural modification effects when the metal ions are doped into the ZIF-8 dodecahedron. The obtained carbon material maintains the regular dodecahedron morphology, which means the relaxation of tension and strong thermal stability during annealing. Moreover, the presence of nickel enhances the carbonization degree and electrochemical stability of FeNi@trC, while the calcination of the tensive ZIF-8 precursor offers more defect sites. The discharge capacities of FeNi@trC materials are stable at 182.9 mAh·g^-1and 567.9 mAh·g^-1for sodium-ion batterie (SIB) and lithium-ion batterie (LIB) at 0.05 A·g^-1. Compared with the current density of 0.05 A·g^-1, the discharge capacity of SIB and LIB attenuates by 29.4% and 55.9% at 1 A·g^-1, respectively, and the FeNi@trC shows good performance stability in the following cycles.

Strategies for improving the catalytic activity of metal-organic frameworks and derivatives in SR-AOPs: Facing emerging environmental pollutants

As persulfate activator, Metal organic frameworks (MOFs) and derivatives are widely concerned in degradation of emerging environmental pollutants by advanced oxygen technology dominated by sulfate radical () (SR-AOPs). However, the poor stability and low catalytic efficiency limit the performance of MOFs, requiring multiple strategies to further enhance their catalytic activity. The aim of this paper is to improve the catalytic activity of MOFs and their derivatives by physical and chemical enhancement strategies. Physical enhancement strategies mainly refer to the activation strategies including thermal activation, microwave activation and photoactivation. However, the physical enhancement strategies need energy consumption and require high stability of MOFs. As a substitute, chemical enhancement strategies are more widely used and represented by optimization, modification, composites and derivatives. In addition, the identification of reactive oxygen species, active site and electron distribution are important for distinguishing radical and non-radical pathways. Finally, as a new wastewater treatment technology exploration of unknown areas in SR-AOPs could better promote the technology development.

In Situ Growth of Nitrogen-Doped Carbon Nanotubes Based on Hierarchical Ni@C Microspheres for High Efficiency Bisphenol A Removal through Peroxymonosulfate Activation

N-doped carbon nanotubes (NCNTs) are promising metal-free heterogeneous catalysts toward peroxymonosulfate (PMS) activation in advanced oxidation processes for wastewater remediation. However, conventional CNTs always suffer from serious agglomeration and low N content, which renders their design synthesis as an important topic in the related field. With hierarchical Ni@C microspheres as a nutritious platform, we have successfully induced in situ growth of NCNTs on their surface by feeding melamine under high-temperature inert atmospheres. These as-grown NCNTs with a small diameter (ca. 20 nm) are firmly rooted in Ni@C microspheres and present loose accumulation on their surface, and their relative content can be tailored easily by manipulating the mass ratio of melamine to Ni@C microspheres. The investigation on bisphenol A (BPA) removal reveals that the loading amount of NCNTs affects the catalytic performance greatly, and the optimum ratio of melamine to Ni@C microspheres is 5.0 because the corresponding MNC-5.0 possesses sufficient surface N sites and moderate electron transfer, resulting in powerful PMS activation and sufficient utilization of reactive oxidative species (ROS). MNC-5.0 also addresses its advantages as compared with other NCNTs from post treatment and spontaneous growth strategies. The primary ROS responsible for BPA degradation are identified as hydroxyl radical, sulfate radical, superoxide radical, and singlet oxygen through quenching experiments and electron paramagnetic resonance, and the corresponding catalytic mechanism is also put forward based on these results.

High yield M-BTC type MOFs as precursors to prepare N-doped carbon as peroxymonosulfate activator for removing sulfamethazine: The formation mechanism of surface-bound SO4•- on Co-Nx site

M-BTCs (M = Fe, Co and Mn)/melamine were used to prepare N-doped carbon materials, and their performances as activator of peroxymonosulfate (PMS) for sulfamethazine (SMZ) removal were compared. M-BTC type metal-organic frameworks (MOFs) were synthesized under room temperature, with their yield about 7.5 times of ZIF-67 which is the most used MOFs to prepare N-doped carbon materials as the catalyst of persulfate-based advanced oxidation processes. Co-BTC/melamine derived N-doped carbon materials (Co-BTC/5MNC) performed the best, even better than that of ZIF-67 derived N-doped carbon materials. Initial pH (3-9), 0-10 mM inorganic anions (Cl^-, NO₃^-, HCO₃^- and H₂PO₄^2-) and humic acid (5 and 10 mg/L) had no obvious inhibition on SMZ removal with Co-BTC/5MNC as catalyst. The results of both X-ray photoelectron spectroscopy and density functional theory (DFT) calculations indicated that N-coordinated cobalt single atom site (Co-N_x) was the possible active site of Co-BTC/5MNC. Importantly, surface-bound SO₄^•- was identified as the dominant reactive oxygen species for SMZ removal. The SO₄^•- generated through the charge transfer between PMS and catalyst, and was tightly adsorbed on Co-N_x site.

Enhancing the Electron Transport, Quantum Yield, and Catalytic Performance of Carbonized Polymer Dots via MnO Bridges

Carbonized polymer dots (CPDs) have received tremendous attention during the last decade due to their excellent fluorescent properties and catalytic performance. Doping CPDs with transition metal atoms accelerates the local electron flow in CPDs and improves the fluorescent properties and catalytic performance of the CPDs. However, the binding sites and the formation mechanisms of the transition-metal-atom-doped CPDs remain inconclusive. In this work, Mn²⁺ -ion-doped CPDs (Mn-CPDs) are synthesized by the hydrothermal method. The Mn²⁺ ions form MnO bonds that bridge the sp² domains of carbon cores and increases the effective sp² domains in the Mn-CPDs, which redshifts the fluorescence emission peak of the Mn-CPDs slightly. The Mn²⁺ ions form covalent bonds in the CPDs and remedy the oxygen vacancies of the CPDs, which cuts off the non-radiative-recombination process of the Mn-CPDs and increases the quantum yield of the Mn-CPDs to 70%. Furthermore, the MnO bonds accelerate the electron flow between adjacent sp² domains and enhances the electron transport in the Mn-CPDs. Thus, the Mn-CPDs demonstrate excellent catalytic performance to activate hydrogen peroxide (H₂ O₂ ) and produce hydroxyl radicals (•OH) to degrade methylene blue (MB) and rhodamine B (RhB).

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Catalytic degradation of sulfamethoxazole by peroxymonosulfate activation system composed of nitrogen-doped biochar from pomelo peel: Important roles of defects and nitrogen, and detoxification of intermediates

Nitrogen doping could improve the catalytic performance of carbon materials, in which the nitrogen configuration could be used as active sites for peroxymonosulfate (PMS) activation. Herein, this paper studied how to turn waste to "treasure" by agriculture waste pomelo peel to prepare nitrogen-doped biochar and successfully applied it to advanced oxidation field. The effects of the sodium bicarbonate (NaHCO₃), melamine, and pyrolysis temperature on the catalytic activity of biochar for the removal of sulfamethoxazole (SMX) were investigated. The optimized nitrogen-doped biochar (C-N-M 1:3:4) possessed high specific surface area (SSA, 738 m²/g) and high level of nitrogen doping (nitrogen content 13.54 at%). Accordingly, it exhibited great catalytic performance for PMS activation to remove SMX antibiotic, and 95% of SMX was removed within 30 min. High catalytic activity of C-N-M 1:3:4 was attributed to rich defects, carbonyl group, high content of graphitic N and pyrrolic N, and large SSA, in which non-radical oxidation process based on singlet oxygen (¹O₂) and electron transfer contributed to the SMX degradation. The prepared nitrogen-doped biochar possessed high stability and reusability and the removal efficiency of SMX still reached 80% after four cycles. Additionally, the phytotoxicity assay indicated that the toxicity of degradation intermediates was obviously decreased in the PMS/ C-N-M 1:3:4 system.

Metal organic framework derived one-dimensional porous Fe/N-doped carbon nanofibers with enhanced catalytic performance

The aggregation of metal nanoparticles and collapse of precursor metal organic frameworks (MOFs) structure during the carbonization process largely hamper the catalytic performance of MOFs-derived carbon catalysts. Here, we report hollow and porous one-dimensional Fe/N-doped carbon nanofibers (Fe/NCNFs) for activating peroxymonosulfate (PMS), which was obtained by immobilizing Fe-MIL-101 on polyacrylonitrile (PAN) nanofibers via electrospinning technique followed by pyrolysis. The presence of one-dimensional PAN channel suppresses the agglomeration tendency of metal particles during the carbonisation process of Fe-MIL-101, resulting in a uniform dispersion of nanoparticles and an increase of catalytic active sites. The resultant Fe/NCNFs-9 possesses unique hierarchical architecture, large active surface area, well-dispersed Fe species, and abundant Fe-N active sites. These superiorities contributed to the better catalytic performance of Fe/NCNFs-9 compared with PAN derived carbon (PAN-C-9) and Fe-MIL-101 derived carbon (Fe-C-9). Through a series of inhibitor experiments and electrochemical tests, the radical pathway is dominant on BPA removal with the participation of the non-radical pathway in the multi-sites Fe/NCNFs-9/PMS/BPA system. Surprisingly, this strategy could successfully disperse Fe species and effectively reduce the Fe leaching. This work supplies a novel method to design efficient MOFs-derived carbon catalysts toward micropollutants removal.

In-situ synthesis of manganese oxide‑carbon nanocomposite and its application in activating persulfate for bisphenol F degradation

In this work, manganese oxide‑carbon nanocomposite catalytic materials (MnO@CNs) with a "core-shell" structure were synthesized in the one-step synthesis using sodium alginate as a template. XRD and Raman spectroscopy proved that high calcination temperatures were beneficial to the graphitization of carbon and the formation of Mn₇C₃. Both SEM and TEM images of MnO@CNs identified that MnO nanoparticles were encapsulated in a three-dimensional carbon matrix and simultaneously protected by a "carbon-shell" with an adherent graphite structure, which could facilitate electron transfer. The MnO@CNs could activate PS to degrade BPF completely within 30 min in solutions with a wide pH range or coexisting anions and organics. The valence change of Mn could promote the generation and conversion of various free radicals and non-radicals, of which O₂·^- played a leading role in the decomposition of BPF. In addition, the potential degradation pathways and degradation mechanisms of BPF in the MnO@CNs/PS system were also explored according to DFT calculations and product detection results.

ZIF-8 derived Fe‒N coordination moieties anchored carbon nanocubes for efficient peroxymonosulfate activation via non-radical pathways: Role of FeNx sites

Developing high-efficient hybrids carbon catalysts for PMS-based advanced oxidation process (AOPs) are crucial in the field of environmental remediation. In this work, novel carbon nanocubes (xFe‒N‒C) with three-dimensional porous structure and abundant well-dispersed FeN_x sites were obtained via a skillful cage-encapsulated-precursor pyrolysis strategy. The as-synthesized xFe‒N‒C exhibited superb activity for phenol degradation by activating peroxymonosulfate (PMS). Besides, the catalytic system not only possessed good recycling performance, wide pH adaptation and relatively low activation energy, but also had high resistance to environmental interference. Singlet oxygen (¹O₂) dominated non-radical process was responsible for phenol degradation rather than traditional radical pathways. Impressively, the doping level of Fe could regulate FeN_x contents in catalysts, and the catalytic activity of xFe‒N‒C was greatly enhanced with increasing FeN_x contents. Based on density functional theory calculations (DFT), the introduction of FeN_x sites regulated the electronic structure of catalysts. Such electron-deficient Fe center acted as electron acceptor to receive electrons transmitted by the adsorbed PMS, thus generating highly reactive ¹O₂ for rapid phenol oxidation. This work provides a new insight into the innovation in transition metal-nitrogen hybrid carbon catalysts and highlights the pivotal roles of FeN_x sites in ¹O₂ generation during PMS activation process.

Enhanced adsorption and catalytic peroxymonosulfate activation by metal-free N-doped carbon hollow spheres for water depollution

Rational design of metal-free carbon-based heterogeneous catatlyst for wastewater remediation via peroxymonosulfate (PMS) activation is highly desirable. Here, hollow structured porous carbon with abundant N, a high graphitization degree, and a large specific surface area and pore volume (1301 m²/g and 1.12 cm³/g) was synthesized by the pyrolysis of core-shell structured composites consisting of polystyrene (PS) cores and Zeolitic imidazolate frameworks-8 (ZIF-8) shells. The hollow structured carbon (CPS@ZIF-8) was characterized thoroughly and applied for phenol degradation by the activation of PMS. The effects of operation conditions such as the catalyst and PMS dose, phenol concentration, initial pH, and temperature on phenol removal were investigated comprehensively. Moreover, the main reactive species involved in phenol oxidation were investigated, and a plausible mechanism for the degradation of phenol is proposed. The results show that CPS@ZIF-8 exhibited an excellent phenol adsorption and degradation performance, which can be mainly ascribed to its large surface area, abundance of nitrogen and hollow porous structure. Moreover, both the nonradical pathway (involving ¹O₂) and the radical pathway (involving SO₄^- and O₂^-) were found to be involved in the decomposition of phenol.

A trade-off between adsorption and photocatalysis over ZIF-derived composite

The adsorption with highly porous adsorbents is an efficient technique to trap the uncontrolled release of antibiotics in the environment, however, mere adsorption does not mineralize the discharged antibiotics. On the contrary, the regular photocatalysts completely mineralize the antibiotics, however suffers from high efficiency due to comparatively low surface area and porosity. In this work, a balance has been made between efficient adsorption followed by complete degradation of the adsorbed antibiotic over ZIF-8 derived ZnO/N-doped carbon composite. The nitrogen-doped carbon produced at 1000 °C showed a very high adsorption capacity of SMX, due to higher surface area, porosity and better surface interaction between adsorbate and adsorbent. The ZnO formed at 600 °C produced sufficient OH· that were responsible to show a very high rate of complete photocatalytic mineralization of SMX over the material. The ZnO/N-doped carbon composite showed a very high rate of photodegradation with a corresponding rate constant of 4.36 × 10^-2 min^-1. The complete degradation mechanism was proposed and rates were compared with existing literature.

High-performance and flexible all-solid-state hybrid supercapacitor constructed by NiCoP/CNT and N-doped carbon coated CNT nanoarrays

The exploration of flexible supercapacitors with high energy density is a matter of considerable interest to meet the demand of wearable electronic devices. In this work, with carbon nanotubes (CNTs) grown on carbon cloth (CC) as flexible substrate, NiCoP nanoflake-surrounded CNT nanoarrays (NiCoP/CNT) and N-doped carbon coated CNT nanoarrays (CNT@N-C) were synthesized on CC and utilized as cathode and anode materials for constructing flexible all-solid-state hybrid supercapacitor. Both them exhibit excellent electrochemical performance. NiCoP/CNT/CC composites can deliver a specific capacitance of 261.4 mAh g^-1, and CNT@N-C/CC exhibits a high capacitance of 256 F g^-1 at the current density of 0.5 A g^-1. The hybrid supercapacitor built from the two well designed electrodes can provide a specific capacitance of 123.3 mAh g^-1 at current density 1 mA g^-1 within a potential window of 0-1.5 V and retain almost 85% of its initial capacitance after 5000 cycles. Furthermore, the flexible devices show the maximum energy density of 138.7 Wh kg^-1 and a power density of 6.25 kW kg^-1, obviously superior to some recent reported supercapacitor devices, indicating its potential in practical application.

Metal-Organic Frameworks and Their Derived Materials: Emerging Catalysts for a Sulfate Radicals-Based Advanced Oxidation Process in Water Purification

With the ever-growing environmental issues, sulfate radical (SO₄^•- )-based advanced oxidation processes (SR-AOPs) have been attracting widespread attention due to their high selectivity and oxidative potential in water purification. Among various methods generating SO₄^•- , employing heterogeneous catalysts for activation of peroxymonosulfate or persulfate has been demonstrated as an effective strategy. Therefore, the future advances of SR-AOPs depend on the development of adequate catalysts with high activity and stability. Metal-organic frameworks (MOFs) with large surface area, ultrahigh porosity, and diversity of material design have been extensively used in heterogeneous catalysts, and more recently, enormous effort has been made to utilize MOFs-based materials for SR-AOPs applications. In this work, the state-of-the-art research on pristine MOFs, MOFs composites, and their derivatives, such as oxides, metal/carbon hybrids, and carbon materials for SR-AOPs, is summarized. The mechanisms, including radical and nonradical pathways, are also detailed in the discussion. This work will hopefully promote the future development of MOFs-based materials toward SR-AOPs applications.

N-doped hierarchically porous carbon for highly efficient metal-free catalytic activation of peroxymonosulfate in water: A non-radical mechanism

Metal-free carbo-catalyst has recently emerged as a promising candidate as a substituent for tradition-metal based heterogeneous catalyst for catalytic activation of peroxymonosulfate (PMS). However, most reported carbo-catalysts suffer from low catalytic efficiency and poor stability, thus a high-performance catalyst is urgently desired. In this study, a novel carbo-catalyst (NHPC-800), prepared by using tannic acid and dicyandiamide as renewable carbon/nitrogen feedstocks via a simple pyrolysis route, is reported as an activator of PMS with highly efficient catalytic ability and stability. The as-prepared NHPC-800 possesses as high as 22.4 atom% of nitrogen dopants and a hierarchically porous structure with abundant meso/macropores, accompanied by the abundant edges and wrinkles, which supply sufficient exposed catalytically active centers and fast electrons/mass transportations. Using rhodamine B as a model pollutant, the NHPC-800 shows a highly efficient catalytic ability which is superior to most reported carbo-catalysts and even some state-of-the-art metal catalysts. Based on competitive quenching experiments and electron paramagnetic resonance (EPR) results, a non-radical pathway involving the generation of ¹O₂ is responsible for the degradation of pollutants. Given that the NHPC-800 shows good recycling performance and strong resistance to adventitious interference such as anions and natural organic matters, we believe NHPC-800 can be a promising candidate for practical applications, and this study can provide inspirations for the further development of highly efficient carbo-catalysts.

Heterogeneous activation of peroxymonosulfate by hierarchical CuBi2O4 to generate reactive oxygen species for refractory organic compounds degradation: morphology and surface chemistry derived reaction and its mechanism

Activation of peroxymonosulfate (PMS) by a novel hierarchical CuBi₂O₄ generated reactive oxygen radical for degradation refractory organic compounds in aqueous solution, which would be controlled by the morphology and surface chemistry of solid catalyst. It's found that the activation ability of CuBi₂O₄ toward PMS was highly dependent on the morphology and surface hydroxyl group, as using rhodamine B (RhB) as the model compound. The spherical CuBi₂O₄, which possessed higher density of surface hydroxyl group, exhibited better catalytic activity in RhB degradation than scattered cluster CuBi₂O₄, and as-prepared CuBi₂O₄ could efficiently activated PMS to degrade RhB within a wide pH range as an absolute heterogeneous process. The emerging organic chemicals, including bisphenol A, 1H-benzotriazole, and carbamazepine, could also be effectively removed in this novel CuBi₂O₄/PMS. Furthermore, activation mechanism of PMS by as-prepared CuBi₂O₄ was proposed, the existence of surface hydroxyl group bonded with Cu(II), and inward electron transfer cycling reaction between Cu(II)/Cu(I) facilitated the effective activation of PMS to generate SO₄^·- and ·OH. In addition, the intermediates of RhB formed in this process were identified by silylation derivatation-GC-MS and LC-high-resolution MS/MS, and degradation pathway was proposed.

Template synthesis of nitrogen-doped carbon nanocages–encapsulated carbon nanobubbles as catalyst for activation of peroxymonosulfate

Nitrogen-doped carbon nanocages–encapsulated carbon nanobubbles were employed as high-performance peroxymonosulfate activators for the degradation of organic pollutants.

Synthesis of nanoporous cobalt/carbon materials by a carbonized zeolitic imidazolate framework-9 and adsorption of dyes

The cobalt/carbon material Z9-600 exhibits a high adsorption capacity for methylene green and a high regeneration efficiency after 4 cycles of use and reuse.

In situ growth of ZIF-67 on a nickel foam as a three-dimensional heterogeneous catalyst for peroxymonosulfate activation

Macroscopic three-dimensional NF/ZIF-67 efficiently catalyzed peroxymonosulfate activation.