Removal of Cr(VI) by surfactant modified Auricularia auricula spent substrate: biosorption condition and mechanism

Expanding the valorization of waste mushroom substrates in agricultural production: progress and challenges

Waste mushroom substrate (WMS) generated in large quantities from mushroom production process has caused severe environmental pollution. As a sustainable resource, the valorization of WMS in the agricultural field has attracted attention due to the abundant active components. A comprehensive review of valorization of WMS in agricultural production is meaningful to promote the further utilization of this resource. This paper provided an overview of the valorization in sustainable agricultural production using WMS, including animal and crop farming improvement, and agricultural environmental restoration. Moreover, the limitations and the possible development directions of WMS in agricultural production were discussed. Different sustainable cycle models for WMS in agricultural production were proposed. The aim of this review is to provide a feasible solution for the favorable treatment of WMS and improvement of agricultural production quality.

Remediation of cadmium contaminated soil by composite spent mushroom substrate organic amendment under high nitrogen level

Cadmium (Cd) contamination in soil poses a serious threat to ecological environment and crop quality, especially under high nitrogen level. Here, the efficiency of composite organic amendment (spent mushroom substrate and its biochar) on remediation of Cd contaminated soil under high nitrogen level has been studied through a 42 days' soil incubation experiment. The results showed: (i) the application of composite organic amendment minimized the repercussions of high nitrogen and significantly reduced the exchangeable Cd proportion by 28.3%-29.5%, especially for Ca(NO₃)₂ treatment; (ii) the application of composite organic amendment improved the physicochemical properties of soil, such as pH, CEC and organic matter content increased by 0.63-0.99 unit, 39.69%-45.00% and 7.77%-11.47%, and EC decreased by 16.21%-44.47% compared with non-amendment Cd-contaminated soil, respectively; (iii) the application of composite organic amendment significantly increased the soil enzyme activities and microbial biomass, among which urease activity was increased most by 12.06-16.42 mg·g^-1·d^-1, and the copy number of AOA was decreased by 30.6%- 92.0%, and the copy number of AOB was increased most by about 45 times. In brief, the composite organic amendment can alleviate the adverse effects of Cd and nitrogen on the soil, but its long-term efficacy needs to be verified in further field study.

Removal of yttrium from rare-earth wastewater by Serratia marcescens: biosorption optimization and mechanisms studies

The discharge of yttrium containing wastewater is a potential risk to human health. Although biosorption is a promising method to remove yttrium from wastewater, whereas the application of it is limited due to the lack of efficient biosorbents. In this study, the removal of yttrium from wastewater using Serratia marcescens as a biosorbent was conducted. The effects of six parameters including pH (2–5.5), initial yttrium concentration (10–110 mg/L), biosorbent dosage (0.1–0.5 g/L), biosorption time (10–700 min), stirring speed (50–300 rpm) and temperature (20–60 °C) were evaluated. The main parameters were optimized using response surface methodology. The results showed that the adsorption capacity reached 123.65 mg/g at the optimized conditions. The biosorption mechanism was revealed based on a combined analysis using field emission transmission electron microscope-energy dispersion spectrum, Fourier transform infrared spectrophotometer, and X-ray photoelectron spectroscopy. These results revealed that the hydroxyl, carboxyl, and amino groups were the adsorption functional groups for yttrium ions. Biosorption of yttrium by S. marcescens is under the combination of ion exchange, electrostatic attraction and complexation. These findings indicated that S. marcescens can be used as an efficient biosorbent to remove yttrium from wastewater. In addition, its adsorption capacity can be further improved by the enhancement of adsorption functional groups on the surface through chemical modification.

Additions of optimum water, spent mushroom compost and wood biochar to improve the growth performance of Althaea rosea in drought-prone coal-mined spoils

Ecosystem degradation as a result of coal mining is a common phenomenon in various regions of the world, especially in arid and semi-arid zones. The implementation of appropriate revegetation techniques can be considered crucial to restore these degraded areas. In this regard, the additions of spent mushroom compost (SMC) and wood biochar (WB) to infertile and degraded soils have been reported to enhance soil fertility and plant growth under water (W) deficit conditions. However, the combined application of W, SMC and WB to coal mine degraded soils, to promote Althaea rosea growth and facilitate subsequent restoration, has not been explored yet. Hence, in the current study a pot experiment was carried out by growing A. rosea on coal mine spoils to assess the influence of different doses of W, SMC and WB on its morpho-physiological and biochemical growth responses. The results indicated that several plant growth traits like plant height, root length and dry biomass significantly improved with moderate W-SMC-WB doses. In addition, the simultaneous application of W-SMC-WB caused a significant decrease in hydrogen peroxide (H₂O₂) (by 7-56%), superoxide anion (O₂^●‒) (by 14-51%), malondialdehyde (MDA) (by 23-46%) and proline (Pro) contents (by 23-66%), as well as an increase in relative water content (by 10-27%), membrane stability index (by 2-24%), net photosynthesis rate (by 40-99%), total chlorophylls (by 43-113%) and carotenoids (by 31-115%), as compared to the control treatment. The addition of SMC and WB under low-W regime enhanced leaf water use efficiency, and soluble sugar content, also boosting the activity of superoxide dismutase, catalase, peroxidase and ascorbate peroxidase in leaf tissues, thus reducing the oxidative stress, as proved by low levels of H₂O₂, O₂^●‒, MDA and Pro contents. Finest growth performance under optimum doses of W (60% field capacity), SMC (1.4%) and WB (0.8%) suggest that revegetation of A. rosea with the recommended W-SMC-WB doses would be a suitable and eco-friendly approach for ecological restoration in arid degraded areas.

Characterization of biochars derived from various spent mushroom substrates and evaluation of their adsorption performance of Cu(II) ions from aqueous solution

A total of 16 biochar adsorbents were produced from four types of spent mushroom substrates to investigate the effect of pyrolysis temperature and raw material composition on the Cu(II) adsorption performance of the resulting biochars. It was determined that the pyrolysis temperature and substrate composition markedly influenced the thermal stability, the degree of carbonization, surface functional group content, and structural morphology of the biochars, but did not affect the adsorption isotherms or kinetics. Optimal results were obtained with an initial pH of 5, adsorbent dosage of 1 g/L, Cu(II) concentration of 50 mg/L, and temperature of 25 °C. The four best-performing biochars conformed to the Langmuir isotherm model and followed pseudo-second-order kinetics with maximum Cu(II) adsorption between 52.6 and 65.6 mg/g. Precipitation was the dominant mechanism for Cu(II) adsorption onto Lentinus edodes spent substrate-derived biochar pyrolyzed at 600 °C (LESS600), whereas complexation with surface functional groups was the prominent mechanism of Cu(II) removal by Auricularia auricula spent substrate-derived biochar pyrolyzed at 500 °C (AASS500). The Flammulina velutipes and Pleurotus ostreatus spent substrate-derived biochars pyrolyzed at 600 °C (FVSS600 and POSS600, respectively) removed Cu(II) ions using both precipitation and Cu²⁺-π complexation interactions. The findings indicate that biochar derived from spent mushroom substrates containing abundant lignin and pyrolyzed at high temperatures (500 or 600 °C) demonstrate effective Cu(II) removal because of the various physico-chemical properties discussed herein.

Microwave-Assisted Rapid Synthesis of Reduced Graphene Oxide-Based Gum Tragacanth Hydrogel Nanocomposite for Heavy Metal Ions Adsorption

Reduced graphene oxide (RGO) was synthesized in this research via Tour's method for the use of filler in the hydrogel matrix. The copolymerization of N,N-dimethylacrylamide (DMA) onto the gum tragacanth (GT) was carried out to develop gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)) hydrogel using N,N'-methylenebisacrylamide (NMBA) and potassium persulfate (KPS) as cross-linker and initiator correspondingly. The various GT-cl-poly(DMA) hydrogel synthesis parameters were optimized to achieve maximum swelling of GT-cl-poly(DMA) hydrogel. The optimized GT-cl-poly(DMA) hydrogel was then filled with RGO to form reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide (GT-cl-poly(DMA)/RGO) hydrogel composite. The synthesized samples were used for competent adsorption of Hg²⁺ and Cr⁶⁺ ions. Fourier transform infrared, X-ray powder diffraction, field emission scanning electron microscopy, energy-dispersive X-ray spectroscopy were used to characterize the gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. The experiments of adsorption-desorption cycles for Hg²⁺ and Cr⁶⁺ ions were carried out to perform the reusability of gum tragacanth-cl-N,N-dimethylacrylamide hydrogel and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide hydrogel composite. From these two samples, reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide exhibited high adsorption ability. The Hg²⁺ and Cr⁶⁺ ions adsorption by gum tragacanth-cl-N,N-dimethylacrylamide and reduced graphene oxide incorporated gum tragacanth-cl-N,N-dimethylacrylamide were best suited for pseudo-second-order kinetics and Langmuir isotherm. The reported maximum Hg²⁺ and Cr⁶⁺ ions adsorption capacities were 666.6 mg g^-1 and 473.9 mg g^-1 respectively.

Spent mushroom substrate combined with alkaline amendment passivates cadmium and improves soil property

As an extremely toxic metal, cadmium (Cd) is readily taken up by most plants. In situ Cd passivation is of great importance to reduce Cd availability in soil. In this experiment, two alkaline amendments, lime (L) (at a dosage of 0.02%, 0.04%, or 0.08%) and biochar (B) (at a dosage of 0.5%, 1%, or 2%), were used to improve Cd passivation by spent mushroom substrate (SMS) in a simulating Cd-contaminated soil (0.6 mg kg^-1). Results showed that the application of SMS alone reduced Cd bioavailability by 44.80% and EC by 9.71% and increased soil pH by 0.61 units, CEC by 25.32%, and soil enzymes activities by 17.11% to 21.10% compared with non-amendment Cd-contaminated soil. Biochar combination enhanced the efficiency of SMS on Cd reduction by 48.32-66.58% and pH increased by 0.17 to 0.59 units and enzymes activities elevation by 5.74% to 47.29% in a dose-dependent manner. Lime also facilitated SMS to passivate Cd by decreasing bioavailable Cd by 63.10%-66.47% and increasing soil pH by 0.25-0.72 units and enzymes activities by 3.28% to 37.86% compared to those of SMS. Among six combined amendments, SMSB3 (0.5% SMS + 2% B) performed best in reducing bioavailable Cd (39.46% higher than SMS), increasing organic matter content (28.54% higher than SMS) and soil enzyme activities (25.82%, 47.29%, and 26.23% higher than that of SMS for catalase, urease, and invertase, respectively). Both biochar and lime can assist SMS to passivate Cd and improve soil property, and biochar is more efficient than lime in reducing cadmium content and increasing enzyme activity and organic matter.

Phytostabilization of Pb-Zn Mine Tailings with Amorpha fruticosa Aided by Organic Amendments and Triple Superphosphate

A greenhouse pot trial was conducted to investigate the effect of organic amendments combined with triple superphosphate on the bioavailability of heavy metals (HMs), Amorpha fruticosa growth and metal uptake from Pb-Zn mine tailings. Cattle manure compost (CMC), spent mushroom compost (SMC) and agricultural field soil (AFS) were applied to tailings at 5%, 10%, 20% and 30% w/w ratio, whereas sewage sludge (SS) and wood biochar (WB) were mixed at 2.5%, 5%, 10% and 20% w/w ratio. Triple superphosphate (TSP) was added to all the treatments at 4:1 (molar ratio). Amendments efficiently decreased DTPA-extracted Pb, Zn, Cd and Cu in treatments. Chlorophyll contents and shoot and root dry biomass significantly (p < 0.05) increased in the treatments of CMC (except T4 for chlorophyll b) and SMC, whereas treatments of SS (except T1 for chlorophyll a and b), WB and AFS (except T4 for chlorophyll a and b) did not show positive effects as compared to CK1. Bioconcentration factor (BCF) and translocation factor (TF) values in plant tissues were below 1 for most treatments. In amended treatments, soluble protein content increased, phenylalanine ammonialyase (PAL) and polyphenol oxidase (PPO) decreased, and catalase (CAT) activity showed varied results as compared to CK1 and CK2. Results suggested that A. fruticosa can be a potential metal phytostabilizer and use of CMC or SMC in combination with TSP are more effective than other combinations for the in situ stabilization of Pb-Zn mine tailings.

Two physical processes enhanced the performance of Auricularia auricula dreg in Cd(II) adsorption: composting and pyrolysis

This study aims to discover the impact of composting and pyrolysis on the adsorption performance of Auricularia auricula dreg (AAD) for Cd(II) in aqueous solution. Auricularia auricula dreg (AAD), Auricularia auricula dreg biochar (AADB) and Auricularia auricula dreg compost (AADC) were used to remove Cd(II) from aqueous solution, and their adsorption conditions and mechanisms were compared. The adsorption quantity of three adsorbents reached the maximum (AAD: 80.0 mg/g, AADB: 91.7 mg/g, AADC: 93.5 mg/g) under same conditions (adsorbent dosage of 1 g/L, pH 5.0, biosorption temperature of 25 °C, and biosorption time of 120 min). All Cd(II) biosorption processes onto three adsorbents complied with the Langmuir isotherm model and the pseudo-second-order kinetic equation, and spontaneously occurred in an order of AADC > AADB > AAD. The difference in biosorption quantity relied on variation in surface structure, crystal species and element content caused by composting or pyrolysis. Composting enhanced the changes in surface structure, crystal species, functional groups and ion exchange capacity of the AAD, resulting in AAD had greatly improved the biosorption quantity of Cd(II). Pyrolysis increased the adsorption of Cd(II) mainly by increasing the Brunauer-Emmett-Teller (BET) surface area, the particle size and pH, in the same time, providing more oxygen-containing functional groups.

Effect of coexisting ions on Cr(VI) adsorption onto surfactant modified Auricularia auricula spent substrate in aqueous solution

In this paper, the effect of coexisting cations and anions on Cr(VI)(in the form of Cr₂O₇^2-) adsorption onto Auricularia auricula spent substrate (AASS) modified by cetyl trimethyl ammonium bromide (CTAB) was investigated in batch adsorption experiment. The Cr(VI) adsorption capacity of 9.327 mg/g, obtained at pH 3.0, 303 K, adsorbent dosage of 2 g/L, initial Cr(VI) concentration of 20 mg/L, rotational speed of 150 r/min for 120 min, was decreased in the presence of coexisting cations and anions, among which Pb²⁺ and PO₄^3- affected most by 21.79% and 12.43%, respectively. XRD, XPS and FTIR detection found that coexisting Pb²⁺ and PO₄^3- would not only interfere Cr(VI) to form crystals and reduce to Cr(III), but also compete with Cr(VI) for oxygen-containing and amino groups to form Pb-O and P-NH₂, respectively. In addition, the single Cr(VI) adsorption fitted with Langmuir isotherm model, while the competitive adsorption was well described by Freundlich isotherm model. Both single adsorption and competitive adsorption were in line with the pseudo-second-order kinetic model.

Chromium (VI) biosorption by Saccharomyces cerevisiae subjected to chemical and thermal treatments

The potential of chemically and thermally treated Saccharomyces cerevisiae as biosorbents for chromium (VI) was investigated in this work. The presence of this toxic metal in industrial effluents is harmful to the environment, so, it is important to develop environmental friendly methods for Cr(VI) removal from these effluents. Biosorption using microorganisms such as S. cerevisiae is a viable treatment option because this biomass is easily available as a residue of fermentation industries. In this study, the affecting variables on Cr(VI) biosorption were studied by constructing biosorption isotherms, using lyophilized yeast subjected to chemical and thermal treatments. S. cerevisiae was able to remove 99.66% of Cr(VI) from effluents by biosorption. The significant variables affecting biosorption were pH, initial Cr(VI) concentration, and contact time. The biosorption isotherms were represented by the Freundlich model for the untreated biomass, BET model for the chemically treated biomass, and Langmuir model for the heat-treated biomass. Thermal treatment increased the biosorption affinity of the biomass for chromium, while the chemical treatment facilitated the formation of a multilayer.