Synthesis of grafted natural pozzolan with 3-aminopropyltriethoxysilane: preparation, characterization, and application for removal of Brilliant Green 1 and Reactive Black 5 from aqueous solutions

Efficient removal of copper and silver ions in electroplating wastewater by magnetic-MOF-based hydrogel and a reuse case for photocatalytic application

Direct discharge of electroplating wastewater containing hazardous metal ions such as Cu2+ and Ag + results in environmental pollution. In this study, we rationally prepare a magnetic composite hydrogel consisted of Fe3O4, UiO-66-NH2, chitosan (CTS) and polyethyleneimine (PEI), namely Fe3O4@UiO-66-NH2/CTS-PEI. Thanks to the strong attraction between the amino group and metal cations, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel shows the maximum adsorption capacities of 321.67 mg g-1 for Cu2+ ions and 226.88 mg g-1 for Ag + ions within 120 min. As real scenario, the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel exhibits excellent removal efficiencies for metallic ions even in the complicated media of actual electroplating wastewater. In addition, we explore the competitive adsorption order of metal cations by using experimental characterization and theoretical calculations. The optimal configuration of CTS-PEI is also discovered with the density functional theory, and the water retention within hydrogel is simulated through molecular dynamics modeling. We find that the Fe3O4@UiO-66-NH2/CTS-PEI hydrogel could be reused and after 5 cycles of adsorption-desorption, removal efficiency could maintain 80%. Finally, the Ag+ accumulated by hydrogel are reduced to generate a photocatalyst for efficient degradation of Rhodamine B. The novel magnetic hydrogel paves a promising path for efficient removal of heavy metal ions in wastewater and further resource utilization as photocatalysts.

Employ a Clay@TMSPDETA hybrid material as an adsorbent to remove textile dyes from wastewater effluents

A grafting of N1-(3-trimethoxysilylpropyl)diethylenetriamine (TMSPDETA) on natural clay was carried out to obtain an organic-inorganic hybrid clay material that was applied as an adsorbent to the uptake of Reactive Blue 19 (RB-19) and Reactive Green 19 (RG-19) dyes from aqueous wastewaters. This research demonstrates the effect of TMSPDETA contents on amino-functionalized clay materials' hydrophobic/hydrophilic behavior. The resultant material was utilized to uptake reactive dyes in aqueous solutions. The clay@TMSPDETA hybrid material was characterized by isotherm of adsorption and desorption of nitrogen, FTIR, elemental analysis, TGA, pHpzc, total acidity, total basicity groups, and hydrophilic balance. The hybrid samples were more hydrophilic than the pristine clay for ratios from 0.1 up to 0.5 due to adding amino groups to the pristine clay. FTIR spectra suggest that TMSPDETA was grafted onto the clay. The hybrid material presents a surface area 2.17-fold (42.7 m2/g) lower than pristine clay (92.7 m2/g). The total volume of pores of hybrid material was 0.0822 cm3/g, and the pristine clay material was 0.127 cm3/g, corresponding to a diminution of the total pore volume (Vtot) of 1.54 times. The kinetic data followed the pseudo-second-order (PSO) model for RB-19 and RG-19 reactive dyes. The equilibrium data were better fitted to the Liu isotherm model, displaying a Qmax as 178.8 and 361.1 mg g-1 for RB-19 and RG-19, respectively, at 20.0 °C. The main mechanism of interactions of the reactive dyes with the hybrid clay is electrostatic interaction. The clay@TMSPDETA has a very good effect on treating synthetic dye-textile wastewater. The removal percentage of simulated wastewater was up to 97.67% and 88.34% using distilled water and plastic industry wastewater as the solvents, respectively. The clay@TMSPDETA-0.1 could be recycled up to 5 cycles of adsorption and desorption of both dyes, attaining recoveries of 98.42% (RB-19) and 98.32% (RG-19) using 0.1 M HCl + 10% ethanol.

The production of activated biochar using Calophyllum inophyllum waste biomass and use as an adsorbent for removal of diuron from the water in batch and fixed bed column

The Calophyllum inophyllum species annually produces a large volume of cylindrical fruits, which accumulate on the soil because they do not have nutritional value. This study sought to enable the use of this biomass by producing activated biochar with zinc chloride as an activating agent for further application as an adsorbent in batch and fixed bed columns. Different methodologies were used to characterize the precursor and the pyrolyzed material. Morphological changes were observed with the emergence of new spaces. The carbonaceous material had a surface area of 468 m² g^-1, D_p = 2.7 nm, and V_T = 3.155 × 10^-1 cm³ g^-1. Scientific and isothermal studies of the adsorption of the diuron were conducted at the natural pH of the solution and adsorbent dosage of 0.75 g L^-1. The kinetic curves showed a good fit to the Avrami fractional order model, with equilibrium reached after 150 min, regardless of the diuron concentration. The Liu heterogeneous surface model well represented the isothermal curves. By raising the temperature, adsorption was encouraged, and at 318 K, the Liu Q_max was reached at 250.1 mg g^-1. Based on the Liu equilibrium constant, the nonlinear van't Hoff equation was employed, and the ΔG° were < 0 from 298 to 328 K; the process was exothermic nature (ΔH⁰ = -46.40 kJ mol^-1). Finally, the carbonaceous adsorbent showed good removal performance (63.45%) compared to a mixture containing different herbicides used to control weeds. The stoichiometric column capacity (q_eq) was 13.30 and 16.61 mg g^-1 for concentrations of 100 and 200 mg L^-1, respectively. The length of the mass transfer zone was 5.326 cm (100 mg L^-1) and 4.946 cm (200 mg L^-1). This makes employing the leftover fruits of the Calophyllum inophyllum species as biomass for creating highly porous adsorbents a very effective and promising option.

Exploration on the role of different iron species in the remediation of As and Cd co-contamination by sewage sludge biochar

Numerous studies have explored the adsorption of cadmium (Cd) and arsenic (As) by iron (Fe)-modified biochar, but few studies have examined in-depth the similarities and differences in the adsorption behavior of different iron types on Cd and As. In this study, sewage sludge biochar (BC) was co-pyrolyzed with self-made Fe minerals (magnetite, hematite, ferrihydrite, goethite, and schwertmannite) to treat Cd and As co-contaminated water. The adsorption of Cd and As on the Fe-modified biochar was further analyzed by adsorption kinetics, adsorption isotherms, and adsorption thermodynamics combined with a series of characterization experiments. Both SEM-EDX and XRD results confirmed the successful loading of iron minerals onto BC. Both adsorption kinetics and adsorption isotherms experiments showed that the adsorption of Cd and As by BC and the other five Fe-modified biochar was mainly controlled by chemical interactions. The results also indicated that goethite biochar (GtBC) was the most effective for the adsorption of Cd among the five Fe-modified biochar. Ferrihydrite biochar (FhBC) formed more diverse complexes, coupled with the relatively stronger electrons accepting ability, thus making it more effective for As adsorption than the others. Additionally, GtBC and hematite biochar (HmBC) were found effective for the adsorption of both Cd and As, whereas MBC was not found effective for either metal. Furthermore, combined with XPS results, the adsorption of Cd by the materials was mainly governed by Cd²⁺-π interactions, complexation precipitation, and co-precipitation, while oxidation reactions also existed for As.

Phosphate adsorption improvement using a novel adsorbent by CaFe/LDH supported onto CO2 activated biochar

It is imperative to remove phosphate from the aquatic system. This nutrient in excess can cause environmental problems such as eutrophication. Therefore, aiming to enhance phosphate removal, this work presents a novel adsorbent developed from the construction of Ca²⁺/Fe³⁺ layer double hydroxides (CaFe/LDH) supported onto biochar physically activated with CO₂ [CaFe/biochar (CO₂)]. Pristine biochar was produced from the pyrolysis of Eucalyptus saligna sawdust, activated with CO₂, and then impregnated with CaFe/LDH. The CaFe/biochar (CO₂) was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET). The characterization confirmed a proper synthesis of the new adsorbent. Experiments were conducted in the form of batch adsorption. Results indicated that the optimum pH and adsorbent dosage were 2.15 and 0.92 g L^-1, respectively. Adsorption kinetics, isotherms, and thermodynamics were also evaluated. Adsorption kinetics and isotherms were better fitted by the pseudo n order and Freundlich models, respectively. Results also indicated a better adsorption capacity (99.55 mg·g^-1) at 55 °C. The thermodynamic indicators depicted that the adsorption process was favorable, spontaneous, and endothermic. Overall, CaFe/biochar (CO₂) could be potentially applied for the adsorptive removal of phosphate from an aqueous solution.

Composite of methyl polysiloxane and avocado biochar as adsorbent for removal of ciprofloxacin from waters

Two carbon composite materials were prepared by mixing avocado biochar and methyl polysiloxane (MK). Firstly, MK was dissolved in ethanol, and then the biochar was added at different times. In sample 1 (R1), the time of adding biochar was immediately after dissolving MK in ethanol, and in sample 2 (R₂), after 48 h of MK dissolved in ethanol. The samples were characterized by nitrogen adsorption/desorption measurements obtaining specific surface areas (S_BET) of 115 m2 g^-1 (R₁) and 580 m2 g^-1 (R₂). The adsorbents were further characterized using scanning electron microscopy, FTIR and Raman spectroscopy, adsorption of vapors of n-heptane and water, thermal analysis, Bohem titration, pHpzc, and C H N elemental analysis. R₁ and R₂ adsorbents were employed as adsorbents to remove the antibiotic ciprofloxacin from the waters. The t_1/2 and t_0.95 based on the interpolation of Avrami fractional-order were 20.52 and 246.4 min (R₁) and 14.00 and 157.6 min (R₂), respectively. Maximum adsorption capacities (Q_max) based on the Liu isotherm were 10.77 (R₁) and 63.80 mg g^-1 (R₂) for ciprofloxacin. The thermodynamic studies showed a spontaneous and exothermic process for both samples, and the value of ΔH° is compatible with physical adsorption.

Microscopic mechanism about the selective adsorption of Cr(VI) from salt solution on nitrogen-doped carbon aerogel microsphere pyrolysis products

A series of nitrogen-doped carbon aerogels (NCAs) were obtained through phase reaction polymerization and different carbonization temperatures to enhance adsorption efficacy of hexavalent chromium (Cr[VI]) from wastewater significantly. Factors that influence adsorption properties of carbon aerogel microspheres toward Cr(VI), such as pH, adsorbent content, initial Cr(VI) concentrations, and coexisting anion, were investigated. Three isotherm (Langmuir, Freundlich, and Sips) and three kinetic (pseudofirst-order, pseudosecond-order, and Elovich) models were used to interpret the adsorption process. The adsorption capacity of Cr(VI) reached 180.62 mg·g^-1, which was superior to that of most aerogel adsorbents. In addition to the adsorption effect, the XPS results also showed that N-containing groups on the NCA surface reduce the adsorbed Cr(VI) to the less toxic Cr(III). The prepared sorbent demonstrates a negligible loss in adsorption capacity after 6 cycles. NCAs show acceptable application prospects in selective removal of Cr(VI) ions.

Geopolymer Materials Based on Natural Pozzolans from the Moroccan Middle Atlas

The pozzolans of the Moroccan Middle Atlas are derived from a low explosive volcanism, mostly strombolian. They are mainly composed of olivine and pyroxene, presenting a less homogeneous structure (irregular vesicles). The main target of this project is to study the use of natural pozzolans (NP) and metakaolin as precursors for the production of geopolymeric binders. The characterization of raw materials and elaborated geopolymers was carried out to study their mineralogical, chemical, microstructural, and mechanical properties. The studied pozzolans and kaolin were crushed, grinded, and sifted to get a fine grain size diameter of less than 100 µm. Then, they were calcined at 750 °C for 2 h to achieve an amorphous structure, increasing of their reactivity. Geopolymer production consists of mixing pozzolans and metakaolin with different amounts with an alkaline solution of sodium hydroxide and sodium silicates. The mass proportion of metakaolin (MK) used in this study was 10%, 20%, and 30%. In the present work, the amount of metakaolin was added as a source of alumina. The elaborated geopolymers were characterized using XRD, FTIR, TGA, and SEM analyses. The compressive strength was measured at 7, 14, and 28 days. The results showed interesting mechanical proprieties at about 18 MPa at 28 days with the mixture containing 20% MK. The addition of MK showed a significant increase in mechanical properties of the elaborated geopolymer. Meanwhile, the other results confirmed the training of new phases in addition to N-A-S-H gel. All these results indicate that the use of pozzolans in the production of geopolymers could be a great solution for the sustainable management of this mineral resource.

Adsorption and thermal degradation of microplastics from aqueous solutions by Mg/Zn modified magnetic biochars

Microplastics (MPs) derived from plastic wastes have attracted wide attention throughout the world due to the wide distribution, easy transition, and potential threats to organisms. This study proposes efficient Mg/Zn modified magnetic biochar adsorbents for microplastic removal. For polystyrene (PS) microspheres (1 µm, 100 mg/mL) in aqueous solution, the removal efficiencies of magnetic biochar (MBC), Mg modified magnetic biochar (Mg-MBC), and Zn modified magnetic biochar (Zn-MBC) were 94.81%, 98.75%, and 99.46%, respectively. It is supposed that the adsorption process was a result of electrostatic interaction and chemical bonding interaction between microplastics and biochar. The coexisting H₂PO₄^- and organic matters in real water significantly affected the removal efficiency of Zn-MBC due to competitive adsorption effect. Microplastic degradation and adsorbent regeneration were accomplished by thermal treatment simultaneously. The degradation of adsorbed MPs was promoted by the catalytic active sites originated from Mg and Zn, releasing adsorption sites. Thermal regeneration maintained the adsorption capability. Even after five adsorption-pyrolysis cycles, MBC (95.02%), Mg-MBC (94.60%), and Zn-MBC (95.79%) showed high microplastic removal efficiency. Therefore, the low-cost, eco-friendly, and robust Mg/Zn-MBCs have promising potential for application in microplastic removal.

Combined antioxidant capped and surface supported redox-sensitive nanoparticles for continuous elimination of multi-metallic species

A strategic modification involving (i) a multi-functional almond shell biochar surface support and (ii) capping with almond skin extracted antioxidants was performed to preserve redox-sensitive Fe⁰ nanoparticles (NPs). pXRD data showed generation of an iron-carbonyl shell on the supported Fe⁰ NPs (SA-Fe⁰), justifying successful antioxidant capping. The total metal removal capacity of 695 mg g^-1i.e. AsO₂^- (300.2 mg g^-1) > Cd²⁺ (224.2 mg g^-1) > CrO₄^2- (125.2 mg g^-1) > Ni²⁺ (44.5 mg g^-1) in batch mode, and 102 mg g^-1 in continuous column setup confirms the excellent reactivity of the SA-Fe⁰ nanocomposite. Loss of the iron-carbonyl shell and iron oxidation during interaction with contaminants confirm no hindrance in electron transfer due to antioxidant capping.

Adsorption investigation of 2,4-D herbicide on acid-treated peanut (Arachis hypogaea) skins

In this work, peanut (Arachis hypogaea) skin, a by-product generated by the agricultural production of its seeds, was employed as a precursor in the preparation of an adsorbent for the 2,4-D removal in water. The skins were treated with sulfuric acid and characterized by different techniques. The adsorption was favored at acid pH = 2 with pH_pzc = 6. The dosage of 0.9 g L^-1 was considered ideal, obtaining satisfactory indications of removal and capacity. The kinetic curves were well represented by the general order model, with the equilibrium reached quickly in the first 30 min for all concentrations. Adsorption isotherm studies showed that the increase in temperature negatively affected the herbicide adsorption, obtaining a maximum capacity of 246.72 mg g^-1, by the Langmuir isotherm at 298 K. The remarkable adsorption efficiency presented by the adsorbent can be associated with the presence of new functional groups on the adsorbent surface generated after the acid treatment. Thermodynamic parameters confirmed the exothermic nature of the adsorptive system. In the treatment of synthetic wastewater consisting of a mixture of herbicides and salts, a high removal efficiency (72%) of herbicides was obtained. Therefore, the development of an adsorbent derived from peanut (Arachis hypogaea) skin treated with sulfuric acid is an excellent alternative, generating remarkable removal results towards 2,4-D herbicide.

Facile fabrication of hybrid titanium(IV) isopropoxide/pozzolan nanosheets (TnS-Pz) of high photocatalytic activity: characterization and application for Cr(VI) reduction in an aqueous solution

This paper presents the synthesis of a hybrid material through the use of natural pozzolan and titanium(IV) isopropoxide using the sol-gel method and its application in the photocatalytic hexavalent chromium reduction. The characterization data indicated a mesoporous material possessing a surface area of 271.7 m² g^-1. The morphology studies (SEM and TEM) showed nanosheet hybrid structures. The analysis of DRUV, FTIR, XRD, and Mössbauer spectroscopy provides a different electronic structure of the synthetized material when compared with the originals, proving the hybridization process between pozzolan and titanium(IV) isopropoxide. The photocatalytic reduction of Cr(VI) to Cr(III) using the hybrid material showed a better performance than conventional photocatalysts (precursor and TiO₂-P25). Operational conditions such as chromium initial concentration (0.02-0.20 mM), solution pH (3-6), and type of scavenger (citric or tartaric acid) were evaluated in order to determine the best experimental conditions for the Cr(VI) photoreduction. At their optimum (catalyst load of 15 mg L^-1, tartaric acid as scavenger, [scavenger]₀/[Cr(VI)]₀ M ratio = 3:1, pH 3, and 25 °C), the total photoreduction of 0.20 mM Cr(VI) was achieved in 180 min. The novel hybrid materials synthesized from pozzolan and titanium(IV) isopropoxide showed to be a potential catalyst for the Cr(VI) reduction in aqueous solution. Graphical abstract.

Effectively removing indole-3-butyric acid from aqueous solution with magnetic layered double hydroxide-based adsorbents

The magnetic layered double hydroxide-based materials (MLDHs) with the metal composition of Mg(II)Al(III) were synthesized by different conditions as the adsorbent for removal of a phytohormone, indole-3-butyric acid (IBA). The morphological characteristics of MLDHs were studied through various characterization methods such as XRD, SEM, TEM, FTIR, BET, Zeta-potential and VSM. The adsorption results showed that the adsorption capacity of MLDH-1 synthesized by co-precipitation method with ammonia as the base source was the best (maximum 522.6 mg/g). The extent of adsorption in the pH range of 3.0-9.0 was observed to be no noticeable change. From the economical point of view, 1.0 g/L MLDH-1 composites were selected as optimum parameter. For a given adsorbent concentration (C_s), its kinetics and adsorption isotherm followed the pseudo-second-order and Liu isotherm model, respectively. The adsorbed sample can be easily magnetically separated and regenerated with NaNO₃. The adsorption process was spontaneous and exothermic, including two path stages: surface adsorption of lamellar and interlayer anion exchange. The research makes a contribution to evaluating the ability of MLDHs in IBA removal and helping the public to understand the mechanism of adsorption process.

Extremely efficient and rapidly adsorb methylene blue using porous adsorbent prepared from waste paper: Kinetics and equilibrium studies

For the first time, zinc chloride activation method was used to prepare waste paper-based activated carbon in this study. The structure, morphology, surface functional groups and particle size distribution of the activated carbon was study using automatic specific surface area analyzer, FTIR, Boehm titration, X-ray diffraction, SEM and EDS. The specific surface area of the activated carbon is up to 1987 m²/g. Cumulative pore volume is up to 2.586 cm³/g, with micropore volume accounting for 92 %. Methylene blue adsorption performance results shown that the adsorbent has achieved high removal efficiency (99.65 % in 10 min, uptake = 996.5 mg/g), its maximum adsorption capacity has reached 1657 mg/g. The pH_pzc of the adsorbent was determined to explore the adsorption mechanism, its results shown that electrostatic adsorption occurs between adsorbents and adsorbents at pH higher than pH_pzc (pH_pzc = 3.2). Moreover, adsorption mechanism was studied by various isothermal models, thermodynamic models, kinetic models. Redlich-Peterson isotherm model best describes the adsorption experiment, which indicated that the adsorption follows a non-ideal and mixed adsorption mechanism. Methylene blue molecules gone into micropore was the adsorption rate-limiting step, and MB adsorption by the waste paper-based adsorbent was a spontaneous, endothermic and randomly increasing adsorption. Simulated wastewater and regeneration experiments were also used to evaluate the adsorbent's treatment capacity and economic efficiency, and these results indicated that the adsorbent has good decolorization and regeneration ability.

Heavy metal ions' poisoning behavior-inspired etched UiO-66/CTS aerogel for Pb(II) and Cd(II) removal from aqueous and apple juice

Here, inspired by the poisoning process of heavy metal in human body that the accidental ingested heavy metal can anchor to the functional groups of DNA/protein/enzyme to exert their toxicities during the rapid blood circulation, we developed the adsorbent that enveloped Etched UiO-66 with abundant functional groups into chitosan (CTS) aerogel to capture Pb(II) and Cd(II) in aqueous and apple juice. SEM, XRD and FTIR spectra were used to characterize the Etched UiO-66/CTS aerogel. The results showed that Etched UiO-66/CTS aerogel has a three-dimensional porous structure, and -OH groups of CTS interact with Zr(IV) of Etched UiO-66 to form the stable UiO-66/CTS aerogel. Benefiting from the intrinsic properties of porous and abundant functional groups, Etched UiO-66/CTS aerogel exhibits satisfactory adsorption capacities of 654.9 mg g^-1 for Pb(II) and 343.9 mg g^-1 for Cd(II) at 45 °C. Moreover, the aerogel shows excellent removal efficiencies of 98.21% for Pb(II) and 98.70% for Cd(II) with initial concentration of 1.0 mg L^-1 in apple juice with little effect on the quality of apple juice. This strategy of mimetic heavy metal ions' poisoning behavior opens up a new avenue for the removal of heavy metal ions in complex matrices.

Oil industry waste based non-magnetic and magnetic hydrochar to sequester potentially toxic post-transition metal ions from water

Solid waste conversion to value-added products is a stepping stone towards sustainable environment. Herein, sesame oil cake (SOC), an oil industry waste was utilized as a precursor to develop hydrochar (HC) samples by varying reaction temperature (150-250 °C) and time span (2-8 h), chemically treated with 10% H₂O₂ to optimize a sample with maximum yield and Pb(II) adsorption. Highest yield (29.2 %) and Pb(II) (24.57 mg/g at C_o: 15 mg/L) adsorption was observed on SOCHC@200 °C/6 h, magnetized (mSOCHC@200 °C/6 h) for comparative study. XRD displayed highly crystalline SOCHC@200 °C/6 h and amorphous mSOCHC@200 °C/6 h, both having a characteristic cellulose peak at 14.9°. mSOCHC@200 °C/6 h displayed superparamagnetic behavior with 11.2 emu/g saturation magnetization. IR spectra confirmed the development of samples rich in oxygen containing functionalities; an additional peak for iron oxides appeared at 586 cm^-1 in mSOCHC@200°C/6 h spectrum. Four major peaks at 531.9, 399.9, 348.2 and 284.7 eV, assigned to O 1s, N 1s, Ca 2p and C 1s, respectively were observed during XPS analyses. An additional peak at 710.3 eV, ascribed to Fe 2p was observed in mSOCHC@200C/6 h XPS spectrum, while a peak at 143.2 eV for Pb 4f appeared in spectra of both Pb(II) saturated samples. pH dependent (maximum at ∼6.7), exothermic Pb(II) adsorption was found. About 50-70% (at C_o: 25 mg/L) adsorption on both SOCHC@200 °C/6 h and mSOCHC@200 °C/6 h was accomplished in a minute, attaining equilibrium in 180 and 240 min, respectively. Error functions and superimposed q_{e, exp}. and q_{e, cal.} values supported Langmuir isotherm model applicability, with respective q_m values of 304.9 and 361.7 mg/g at 25 °C for SOCHC@200 °C/6 h and mSOCHC@200 °C/6 h. Kinetic data was fitted to PSO model. Highest (between 92.2 and 88.9 %) amount of Pb(II) from SOCHC@200 °C/6 h and mSOCHC@200 °C/6 h was eluted by 0.01 M HCl.

Ultrafast removal of radioactive strontium ions from contaminated water by nanostructured layered sodium vanadosilicate with high adsorption capacity and selectivity

Layered sodium vanadosilicates was synthesized for removing soluble strontium ion (Sr²⁺) from simulated radioactive wastewater. SEM, EDS and TEM images indicated that layered sodium vanadosilicates had a nanostructure with flake-like shape providing an extremely large surface area. XRD, FTIR and XPS analyses further revealed a framework structure of adsorbent consisting of corner-sharing SiO₄ tetrahedra and VO₆ octahedra, with sodium ion being the major cation in the synthesized nanostructured layered sodium vanadosilicate. This study for the first time showed ultrafast adsorption of Sr²⁺ by nanostructured layered sodium vanadosilicates in a time frame of seconds with a high adsorption capacity of 174.3 mg/g estimated from Langmuir isotherm. It was found that about 99.0% of Sr²⁺ at an initial concentration of 5.00 mg/L and adsorbent dosage of 0.5 g/L could be removed within several seconds. The kinetic analysis further revealed that pseudo-second-order instead of pseudo-first-order kinetics could satisfactorily describe the observed ultrafast removal of Sr²⁺. In particular, the nanostructure layered sodium vanadosilicates exhibited an excellent affinity to Sr²⁺ over a wide pH range of 3-11. It was also demonstrated that the working mechanisms of nanostructured layered sodium vanadosilicates for Sr²⁺ removal mainly included surface electrostatic interaction and ion-exchange with sodium ion. Furthermore, nanostructure layered sodium vanadosilicates had significant advantages for Sr²⁺ removal compared with other adsorbents. Consequently, it is reasonable to expect that nanostructured layered sodium vanadosilicates synthesized in this study could be considered as a promising adsorbent for ultrafast and high-efficiency removal of radioactive Sr²⁺ from radioactive wastewaters.

Application of Zn/Al layered double hydroxides for the removal of nano-scale plastic debris from aqueous systems

Nano-scale plastic debris (NPDs) are emerging as potential contaminants as they can be easily ingested by aquatic organisms and carry many pollutants in the environment. This study is aimed to remove NPDs from aqueous environment for the first time by using eco-friendly adsorption techniques. Initially, the interaction between NPDs and synthesized Zn-Al layered double hydroxide (LDH) was confirmed by pH titration of Zn-Al LDH against NPDs at varying mass ratio (50:1 to 50:7) and FTIR analysis for both before and after 2 h of contact time. Fast removal was observed in deionized water and synthetic freshwater with maximum sorption capacity (Q_max) of 164.49 mg/g,162.62 mg/g, respectively, according to Sips isotherm. Whereas, removal was least in synthetic hard water having a Q_max value of 53 mg/g. For 2 mM concentration of SO₄^2- and PO₄^3-, the adsorption capacity significantly decreased to 2%. The removal efficiency was found 100 % at pH 4, while at pH 9, it reached 37 % due to increased competitive binding and destabilization of LDH under alkaline conditions. The process of sorption was spontaneous in different types of water studied. The study reveals that Zn-Al LDH can be used as potential adsorbent for the removal of NPDs from freshwater systems.

A novel Fe3+-stabilized magnetic polydopamine composite for enhanced selective adsorption and separation of Methylene blue from complex wastewater

Herein, a novel Fe³⁺-stabilized magnetic polydopamine composite (Fe₃O₄/PDA-Fe³⁺) was facilely constructed, systematically characterized, and subsequently applied for the first time as a versatile adsorbent for treatment of Methylene blue (MB) in complex wastewater. Results showed that as-prepared material had prominent adsorption ability toward MB in its single dye solution over a wide pH range (3-10) with q_max value of 608.8 mg/g at 318 K. More interestingly, MB could be selectively captured by resulting adsorbent from mixed dye solutions (MB-cationic dye and MB-anionic dye) and complex aqueous solution with high ionic strength up to 0.5 mol/L NaCl. It was eventually revealed that the enhanced and selective adsorption of MB by as-resultant adsorbent was due to the synergistic effects between multiple uptake mechanisms. What's more, its adsorption efficiency toward MB in simulated wastewater still maintained higher than 80 % of its original uptake performance after several runs of adsorption-desorption. Additionally, it exhibited more superior uptake performance toward MB than commercial powder activated carbon (PAC) in column adsorption system. Thus, the outstanding sorption ability, unique capture selectivity, as well as excellent stability and recyclability for model wastewater endow it a promising candidate adsorbent for selective adsorption and separation of MB from complex wastewater.

Adsorption of ferulic acid from an alkali-pretreated hydrolysate using a new effective adsorbent prepared by a thermal processing method

A new adsorbent (AEPA₂₅₀) was prepared using the enzymatic hydrolyzed residue of rice straw in an air environment at 250 ℃ by a thermal processing method. Compared to the commercial adsorbent, AEPA₂₅₀ possessed a larger specific surface area of 277.680 m² g^-1, and the maximum adsorption efficiency of ferulic acid from alkali-pretreated hydrolysate of rice straw achieved 70.33 % at the optimum conditions. Adsorption kinetics and isotherm studies showed that the pseudo second-order (PSO) (0.997 ≤ R² ≤ 0.999) and Liu models (0.931 ≤ R² ≤ 0.997) exhibited better fitting results, which indicated that chemical and saturable adsorption existed between ferulic acid and AEPA₂₅₀. An adsorption thermodynamics study revealed the spontaneous and endothermic adsorption process (ΔH^o > 0 and ΔS^o< 0). Micropore diffusion was defined as the major adsorption rate-limiting step according to the analysis of Webber-Morris and Bangham's model. Additionally, π-π*, ion exchange, hydrogen bonding and precipitation were recognized as the four main mechanisms of ferulic acid removal by AEPA₂₅₀ through SEM/EDX, EDX mapping, XPS, FTIR and XRD analysis. These results indicated that AEPA₂₅₀ was effective for adsorbing inhibitors in pretreated rice straw hydrolysates, and it has high potential for application in establishing the self-sufficient production process of bioethanol.

Nanostructured chitosan/molecular sieve-4A an emergent material for the synergistic adsorption of radioactive major pollutants cesium and strontium

A fresh adsorbent nanostructured chitosan/molecular sieve 4A hybrid (NSC@MS-4A) was fabricated for the rapid adsorption of strontium (Sr²⁺) and cesium (Cs⁺) ions from aqueous solutions. The as-obtained NSC@MS-4A were thoroughly characterized by XRD, FE-SEM, EDS, BET, XPS and FT-IR. The physio-chemical properties and structural aspects revealed that NSC@MS-4A acquires fine surface area (72 m²/g), porous structure as well as compatible functional groups (-P-O-P and -C-O-C) for the admission of Cs⁺ and Sr²⁺ ions. The batch adsorption studies concluded that prepared adsorbent displayed a maximum adsorption of 92-94 % within 40 min. Fast adsorption of Cs⁺ and Sr²⁺ was achieved at neutral pH (6-7), ambient temperature (25-30 °C) and slow agitation speed (50-60 rpm) which could propose vast benefits such as little power utilization and uncomplicated operation. Among six types of adsorption isotherms, Freundlich isotherm showed the best fit with R²>0.997. Pseudo-second order made a better agreement as compare to other kinetic models. The thermodynamic coefficients suggested the passage of Cs⁺ and Sr²⁺ ions through the liquid solid boundary is exothermic and spontaneous. The NSC@MS-4A displayed excellent regenerability properties over five repetitive adsorption/desorption cycles, which specified that as-obtained NSC@MS-4A is a sustainable as well as efficient adsorbent for practical decontamination of radioactive liquid waste.

A novel composite of SiO2 decorated with nano ferrous oxalate (SDNF) for efficient and highly selective removal of Pb2+ from aqueous solutions

Developing a material with high adsorption capacity and selectivity to remove lead from Pb²⁺ polluted wastewater is of vital importance for environment protection and resources utilization. In this study, a novel composite, SiO₂ decorated with nano ferrous oxalate (SDNF), was prepared from natural biotite containing ores to remove Pb²⁺. Pseudo-first-order kinetic (R² = 0.99) and Langmuir models (R² = 0.99) fitted the data well, manifesting that Pb²⁺ adsorption process was monolayer adsorption. The maximum Pb²⁺ adsorption capacity was identified as 446.98 mg/g. SEM and TEM images showed that nano ferrous oxalate with average size of 11.51 nm was coated on the surface of ores, and their distributions were uniform. Results of XRD, XPS, FTIR and zeta potential indicated that ion exchange, surface complexation and electrostatic attraction interaction were involved in the remvoal of Pb²⁺, and the ion exchange between Fe²⁺ and Pb²⁺ played a major role. Moreover, both Cd²⁺ and Zn²⁺ removal efficiency are less than 2 % in Pb-Cd or Pb-Zn coexisted solution, indicating the composite possessed high selectivity for Pb²⁺ removal. All above results indicated that the composite was a material with high adsorption capacity and selectivity for Pb²⁺, which was suitable for remediation of Pb²⁺ pollution from Pb²⁺ containing wastewater.

Selective and efficient adsorption of Au (III) in aqueous solution by Zr-based metal-organic frameworks (MOFs): An unconventional way for gold recycling

Recycling precious metals from secondary resources is of great environmental and economic significance. In this study, the Zr-based MOFs UiO-66-NH₂ was synthesized and used to adsorb Au (III) in aqueous solution. The ultrafine particle size (∼50 nm), excellent crystallinity and huge specific surface area (1039.2 m² ·g^-1) were verified by transmission electron microscope (TEM), powder X-ray diffraction (PXRD) and surface area analysis. About 50 % Au (III) was adsorbed within 6 min and the maximum adsorption capacity at 298 K reached up to 650 mg·g^-1, showing superiority to traditional adsorbents. The general order kinetics model and Liu equation were suitable to describe the adsorption process, which was spontaneous, endothermic and driven by the increasing system entropy. Electrostatic attraction between -NH₃⁺ and Au (III) anions and inner complexation to Zr-OH played a vital role in adsorption. Au (Ⅲ) was reduced to Au° by amino groups via redox reaction certified by X-ray photoelectron spectroscopy (XPS), PXRD and high-resolution transmission electron microscopy (HRTEM) analysis. Moreover, UiO-66-NH₂ displayed high selectivity, robust stability and excellent reusability, making it an ideal candidate for gold recycling in industrial practice.

Excellent adsorptive performance of a new nanocomposite for removal of toxic Pb(II) from aqueous environment: Adsorption mechanism and modeling analysis

Herein, a novel nanocomposite (Fe₃O₄@TATS@ATA) was prepared and used for adsorptive removal of Pb(II) ions from aqueous environment. The magnetic nanocomposite (Fe₃O₄@TATS@ATA) was characterized using FTIR, TEM, SEM, EDX, element mapping analysis (EMA), TGA analysis, XRD patterns, VSM, BET analysis, XPS spectrum, and zeta potential. The FTIR study confirmed the modification of Fe₃O₄ nanoparticles with triaminetriethoxysilane and 2-aminoterephthalic acid while XPS analysis (with peaks at 283.6, 285.1, 286.3, 284.5.0, 288.4 eV) displayed the presence of CSi, CN, OCNH, CC/CC and OCO functional groups, respectively on Fe₃O₄@TATS@ATA. The BET surface area, average pore size, pore volume and magnetization saturation for Fe₃O₄@TATS@ATA were found to be 114 m²/g, 6.4 nm, 0.054 cm^-3/g, and 22 emu/g, respectively. The adsorption isotherm data showed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA fitted to Langmuir and Dubinin-Raduskevich isotherm model due to better R² value which was greater than 0.9 and q_m of Pb(II) was 205.2 mg/g at pH 5.7 in 150 min. Adsorption kinetics data displayed that Pb(II) adsorption onto Fe₃O₄@TATS@ATA was fitted to the pseudo-second-order and Elovich kinetic models. Thermodynamic outcomes exhibited the exothermic and spontaneous nature of adsorption. Results showed that Fe₃O₄@TATS@ATA nanocomposite was promising material for efficient removal of toxic Pb(II) from aqueous environment.

Effect of molecular structure on the adsorption affinity of sulfonamides onto CNTs: Batch experiments and DFT calculations

In order to investigate the adsorption behaviors of sulfonamides onto hydroxylated multi - walled carbon nanotubes (CNTs) with a porous structure and large specific surface area, six typical sulfonamides including sulfanilamide (SAM), sulfamerazine (SMR), sulfadimethoxine (SMX), sulfadiazine (SDZ), sulfamethazine (SMT) and sulfametoxydiazine (SMD) were selected to be adsorbed respectively on CNTs, and in the same time the structural parameters of the six sulfonamides molecules were calculated according to the density functional theory (DFT). Based upon above mentioned experiments and the structural parameters, the quantitative correlation between the structural parameters of sulfonamides molecules and their adsorption affinity (e.g. adsorption capacity and adsorption rate constant) onto CNTs was established, respectively. The adsorption data of sulfonamides fitted well with the pseudo - second - order kinetic model and the Langmuir isotherm model. The order of both pseudo - second - order kinetic constant and maximum adsorption capacity of the six sulfonamides were SAM < SMR < SMX < SDZ < SMT < SMD. The frontier molecular orbital energy (E_HOMO) and dipole moment (μ) could be used as indicators for the adsorption affinity of sulfonamides onto CNTs. Accordingly, the possible adsorption mechanism was proposed.

Quantitative effects of Fe3O4 nanoparticle content on Li+ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides in ultrahigh Mg/Li ratio brines

The quantitative effects of magnetic Fe₃O₄ nanoparticle content on Li⁺ adsorption and magnetic recovery performances of magnetic lithium-aluminum layered double hydroxides (MLDHs) were investigated systematically. MLDHs with different Fe₃O₄ nanoparticle contents were synthesized by a staged chemical coprecipitation method. The property disparities of these MLDHs were analyzed by various characterizations and results proved the existence of magnetic nanoparticles had no impairment on MLDHs crystal structure stability while the mesopores were lessened with the increasing Fe₃O₄ contents. In adsorption experiments using Qarhan Salt Lake brine with Mg/Li mass ratio of 284, the Li⁺ adsorption capacity of MLDHs presented a downtrend with the increasing Fe₃O₄, while the increased magnetic components had positive influence on the Li⁺ separation with Mg²⁺ on account of the steric effect. MLDHs presented excellent Li⁺ selectivity that the Mg/Li mass ratio of desorption solution was significantly decreased below 7.0. Relying on the superparamagnetism, MLDHs recovery all exceeded 97 % in the external magnetic field for only 10 min, and the magnetic recovery performance was promoted with more Fe₃O₄ nanoparticles. Furthermore, on the basis of experimental data, precise models were built and described well the correlations of Fe₃O₄ contents of MLDHs with Li⁺ adsorption capacity and magnetic recovery rate, respectively.

Multi-component adsorption of Pb(II), Cd(II) and Ni(II) onto microwave-functionalized cellulose: Kinetics, isotherms, thermodynamics, mechanisms and application for electroplating wastewater purification

Herein, microwave-functionalized cellulose derived from rice husk was cost-effectively prepared and employed for Pb(II), Cd(II) and Ni(II) elimination in mono- and multi-component systems. Benefiting from microwave irradiation, the functionalized process was achieved in 6.5 min and the resultant RH_MW-X possessed remarkably high adsorption capacities of 295.20 mg/g for Pb(II), 151.51 mg/g for Cd(II) and 72.80 mg/g for Ni(II) within the equilibrium time of 30 min. Noticeably, the metal ions adsorption rate and capacity in binary and ternary systems were lower than that of unary systems. The coexistence of Cd(II) and Ni(II) significantly slowed down the Pb(II) adsorption in binary and ternary systems, while Pb(II) exhibited the most obvious influence on the metal ions uptake in the multi-component systems. FT-IR and XPS results revealed that both ion exchange and chelation were functioned in the metal ions uptake, while physical interaction was also involved in the adsorption process. Moreover, the RH_MW-X possessed favorable recyclability with slight adsorption efficiency decline during five cycles in different systems. Particularly, the RH_MW-X could effectively purify actual industrial wastewater containing Pb(II), Cd(II) and Ni(II) for meeting regulatory requirements. This work facilitates the omnidirectional improvement of adsorbents for the de-pollution of practical heavy metals wastewater.

Preparation of ternary amino-functionalized magnetic nano-sized illite-smectite clay for adsorption of Pb(II) ions in aqueous solution

Ternary amino-functionalized magnetic illite-smectite (AMNI/S) nanocomposites were prepared via integrating two-dimensional illite-smectite nanoflakes (NI/S), magnetite nanoparticles (Fe₃O₄), and 3-aminopropyltriethoxysilane (APTES). The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and vibrating sample magnetometry (VSM). The results show that Fe₃O₄ nanoparticles can be well dispersed on NI/S flakes and the hydrolyzed APTES molecules can simultaneously bond to the hydroxyl groups of Fe₃O₄ and NI/S. Due to the synergetic effect, magnetic NI/S composite can graft more amount of APTES molecules rather than Fe₃O₄ nanoparticles or NI/S alone. When the mass ratio of NI/S:Fe₃O₄ is 1:1, the saturation magnetization of AMNI/S-1 is 17.4 emu/g, facilitating the efficient magnetic separation in aqueous solution. Also, AMNI/S-1 shows a maximal adsorption amount of Pb(II) ions of 227.8 mg/g calculated by the Langmuir model. The effects of initial concentration of Pb(II) ions, pH value, adsorption time, and temperature on the adsorption amount of Pb(II) ions were investigated. The adsorption kinetic models and isotherm models were applied to analyze the adsorption of Pb(II) ions, respectively. The thermodynamic analysis reveals that the adsorption of Pb(II) onto AMNI/S-1 is spontaneous and endothermic in nature. The mechanism for the adsorption of Pb(II) ions onto AMNI/S-1 is due to the surface complexation of Fe₃O₄ and NI/S, and the chelation of amine groups (-NH₂). AMNI/S-1 can be efficiently reused and the regenerated AMNI/S-1 remains 82.91% of initial adsorption capacity after 6-cycle adsorption/desorption process. Thus, ternary AMNI/S-1 could be used as a prospective effective adsorbent.

Porous NiFe-oxide nanocubes derived from prussian blue analogue as efficient adsorbents for the removal of toxic metal ions and organic dyes

A novel porous NiFe-oxide nanocubes (NiFe NCs) binary material was successfully fabricated via a facile and scalable tactic, which involved a morphology-inherited heat treating of Ni₃[Fe(CN)₆]₂·xH₂O prussian blue analogue nanocubes as self-sacrificial templates. Consequently, it was demonstrated that the NiFe NCs consisted of primary nanostructure units and interconnected pores, with an average size of ˜80 nm. When employed as adsorbents, the as-prepared NiFe NCs displayed remarkable adsorption capacities for heavy metal ions (232.3 mg g^-1 for As(V) and 350.71 mg g^-1 for Cr(VI)) and organic dyes (284.99 mg g^-1 for XO and 31.97 mg g^-1 for CR at 298 K). The resulting NiFe NCs further revealed efficient regeneration and reusability even after five consecutive adsorption/desorption cycles. The microscopic spectrum analysis demonstrated that the interaction between As(V) and NiFe NCs was mainly ascribed to the metal-oxide bonds (MO) and hydroxyl groups (OH), while Cr(VI) adsorption was in conjunction with the reduction reaction of Cr(VI) to Cr(III). Furthermore, the adsorption of organic dyes on NiFe NCs depended on the pore structure and molecule sizes of the organic dye molecules. These findings make cost-efficient NiFe NCs materials a powerful candidate for remediating water contaminated with inorganic and organic contaminants.

Enhanced adsorption of cationic Pb(II) and anionic Cr(VI) ions in aqueous solution by amino-modified nano-sized illite-smectite clay

A raw illite-smectite mixed-layered clay (RI/S) was ground for preparing nano-sized I/S clay (NI/S) and subsequently amino-functionalized via grafting of 3-aminopropyltrithoxysilane (APTES) (NH₂-RI/S and NH₂-NI/S, respectively). The samples were characterized by particle size analysis, specific surface area measurement, X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and ²⁹Si nuclear magnetic resonance (²⁹Si NMR). Compared to RI/S, NI/S has a narrow particle size distribution and appears in a platelet-like morphology due to the disintegration/exfoliation of RI/S after grinding. Based on the ²⁹Si NMR spectra, the appearances of tri-silicate units indicate the chemically grafting of APTES molecules on NH₂-RI/S and NH₂-NI/S, respectively. NH₂-NI/S can adsorb greater amounts of Pb(II) cations and Cr(VI) anions rather than NH₂-RI/S since NH₂-NI/S grafts more amounts of amine groups (-NH₂). The isotherm data for adsorption of Pb(II) cations and Cr(VI) anions can be described by the Langmuir model at different temperatures (i.e., 10 °C, 30 °C, and 50 °C), respectively. The maximum adsorption amounts of Pb(II) cations and Cr(VI) anions onto NH₂-NI/S calculated by the Langmuir isotherm model are 131.23 mg/g and 36.91 mg/g at 50 °C, respectively. The adsorptions of Pb(II) cations and Cr(VI) anions onto NH₂-NI/S involve in the surface complexation of NI/S and amine groups.

Selected pharmaceuticals removal using algae derived porous carbon: experimental, modeling and DFT theoretical insights

Porous carbon from Laminaria digitata algae activated using NaOH (PCLD@NaOH) was prepared by a chemical activation approach and has been tested for the adsorption of ketoprofen and aspirin molecules. The prepared PCLD@NaOH was characterized using XPS, FTIR, Raman, N2-physisorption, SEM, acidic/basic character (Boehm), and pHPZC. The batch adsorption of ketoprofen and aspirin was investigated under different parameters. The adsorption kinetics on PCLD@NaOH were well described by the Avrami-fractional kinetic model and the equilibrium data by Liu isotherm model. The adsorption capacity of aspirin (970.88 mg g-1 at 25 °C) was higher than ketoprofen (443.45 mg g-1 at 25 °C). The thermodynamic values indicate that the adsorption of ketoprofen and aspirin is exothermic and spontaneous. These results were in good agreement with DFT calculation that shows that the aspirin molecule presents high reactivity, electrophilicity, and softness compared to the ketoprofen molecule. Finally, the response surface methodology was used to optimize the removal efficiency of ketoprofen and aspirin.

Modeling of adsorption isotherms of reactive red RR-120 on spirulina platensis by statistical physics formalism involving interaction effect between adsorbate molecules

In this study, the formalism of statistical physics is used to describe and interpret the adsorption mechanism by applying the law of real gas which takes into account the interaction between the reactive red 120 dye (RR-120) molecules due to its very large size (approximately 2.11 nm). Modeling of the RR-120 dye adsorption isotherms on Spirulina platensis sp. is performed. Five models based on statistical physics formalism are developed: Hill model with one adsorbed site energy, Hill model with two energies, Hill model with three energies, double layer model with one energy and double layer model with two energies. These five models are treated alternatively with the ideal gas law (IG) and with the law of Ven Der Waals (VDW) real gas (RG). Fitting of six adsorption isotherms at different temperatures (298K, 303K,308K, 313K, 318K and 328K) is performed with, the pH fixed to 2. According to values of correlation coefficient, the Hill model with one energy and a VDW real gas interaction has been chosen as the adequate model to best fit the experimental data.