Efficiency of sequential UV/H2O2 and biofilm process for the treatment of secondary effluent

Ozone, hydrogen peroxide, and peroxymonosulfate disinfection of MS2 coliphage in water

The control of viruses in water is critical to preventing the spread of infectious viral diseases. Many oxidants can inactivate viruses, and this study aims to systematically compare the disinfection effects of ozone (O3), peroxymonosulfate (PMS), and hydrogen peroxide (H2O2) on MS2 coliphage. The effects of oxidant dose and contact time on disinfection were explored, as were the disinfection effects of three oxidizing agents in secondary effluent. The 4-log inactivation of MS2 coliphage required 0.05 mM O3, 0.5 mM PMS, or 25 mM H2O2 with a contact time of 30 min. All three oxidants achieved at least 4-log disinfection within 30 min, and O3 required only 0.5 min. In secondary effluent, all three oxidants also achieved 4-log inactivation of MS2 coliphage. Excitation-emission matrix (EEM) results indicate that all three oxidants removed dissolved organic matter synchronously and O3 oxidized dissolved organic matter more thoroughly while maintaining disinfection efficacy. Considering the criteria of oxidant dose, contact time, and disinfection efficacy in secondary effluent, O3 is the best choice for MS2 coliphage disinfection among the three oxidants.

Advances in application of ultraviolet irradiation for biofilm control in water and wastewater infrastructure

Biofilms are ubiquitous in aquatic environment. While so far, most of the ultraviolet (UV) disinfection studies focus on planktonic bacteria, and only limited attention has been given to UV irradiation on biofilms. To enrich this knowledge, the present paper reviews the up-to-date studies about applying UV to control biofilms in water and wastewater infrastructure. The development of UV light sources from the conventional mercury lamp to the light emitting diode (LED), and the resistance mechanisms of biofilms to UV are summarized, respectively. Then the feasibility to control biofilms with UV is discussed in terms of three technical routes: causing biofilm slough, inhibiting biofilm formation, and inactivating bacteria in the established biofilm. A comprehensive evaluation of the biofilm-targeted UV technologies currently used or potentially useful in water industry is provided as well, after comparative analyses on single/combined wavelengths, continuous/pulsed irradiation, and instant/chronic disinfection effects. UV LEDs are emerging as competitive light sources because of advantages such as possible selection of wavelengths, adjustable emitting mode and the designable configuration. They still, however, face challenges arising from the low wall plug efficiency and power output. At last, the implementation of the UV-based advanced oxidation processes in controlling biofilms on artificial surfaces is overviewed and their synergistic mechanisms are proposed, which further enlightens the prospective of UV in dealing with the biofilm issue in water infrastructure.

A critical review on ibuprofen removal from synthetic waters, natural waters, and real wastewaters by advanced oxidation processes

Ibuprofen (IBP) is one ubiquitous drug prescribed as anti-inflammatory, analgesic, and antipyretic. It has been detected in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water due to its continuous release to the environment, mainly from the excretion in the urine of animals and humans. IBP is a carcinogenic and non-steroidal endocrine disrupting drug with harmful effects over fungal, bacterial, algae, microorganisms, crustacean, and fish species, and can be potentially hazard for human health. Since conventional treatments remove inefficiently this drug, many advanced oxidation processes (AOPs) have been developed aiming their abatement from waters to avoid their harmful health problems. This paper presents an exhaustive and critical review on the application of AOPs to treat synthetic waters, natural waters, and real wastewaters polluted with IBP alone or mixed with other common drugs covering up to 2020. The characteristics and main results obtained for single, hybrid, and sequential treatments are described. Dielectric barrier or pulsed-corona discharges are detailed among the single processes. Hybrid processes such as photocatalysis (UV/H₂O₂, UV/chlorine, TiO₂/UV), hybrid ozonation (O₃/H₂O₂, electro-peroxone, catalytic ozonation), Fenton-based processes (photo-Fenton, electro-Fenton, photoelectro-Fenton), zero-valent iron, ultrasonic, peroxymonosulfate, and persulfate, are discussed. The effect of the kind of irradiation (UV, visible, solar) on photo-assisted processes is analyzed. Sequential processes with biological pre- or post-treatments using or not membranes for natural water and real wastewater remediation are described. Finally, 38 by-products detected during IBP removal by AOPs are reported, allowing envisaging three parallel pathways for its initial degradation.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.