Characterization of the Cd(II) and nitrate removal by bacterium Acinetobacter sp. SZ28 under different electron donor conditions

Groundwater denitrification enhanced by a hydrogel immobilized iron/solid carbon source: impact on denitrification and substrate release performance

Encapsulating a solid carbon source and zero-valent iron (ZVI) within a hydrogel can prevent direct contact with groundwater, thereby extending the lifespan of their released active substrates. It is currently unclear whether the solid carbon source and ZVI will mutually influence each other's active substrate release process and the corresponding denitrification patterns, necessitating further investigation. In this study a hydrogel encapsulating different weight ratios of micron-sized zero-valent iron (mZVI, as ZVI) and polyhydroxybutyrate (PHB, as a solid carbon source) was synthesized. The aim was to investigate the influence of PHB on the release of dissolved iron from mZVI and denitrification mechanism. Results indicated that PHB was consumed at a higher rate than mZVI, and more mZVI active sites could be exposed after PHB consumption. Meanwhile, PHB increased the porosity of the hydrogel, allowing more active sites of mZVI to be exposed and thus releasing more dissolved iron. Furthermore, PHB enhanced the rate of microbial corrosion of mZVI, which further increased the release of dissolved iron. Higher PHB content in the hydrogel reduced the oxidation of the released dissolved iron, resulting in a microbial community dominated by heterotrophic microorganisms. Conversely, lower PHB content led to significant Fe(II) oxidation and a considerable relative abundance of mixotrophic microorganisms in the microbial community. Microorganisms with iron reduction potential were also detected. This study provides theoretical support for the precise control of mixed nutrient denitrification based on hydrogel immobilization and lays the foundation for its further practical application in groundwater.

Sulfur-manganese carbonate composite autotrophic denitrification: nitrogen removal performance and biochemistry mechanism

A novel composite sulfur-manganese carbonate autotrophic denitrification (SMAD) system was developed to reduce sulfate production and provide pH buffer function while improving denitrification efficiency without external organics. The average removal efficiency of total nitrogen (TN) was 98.09% and 96.29%, and that of NO3--N was 99.53% and 97.77%, respectively, in the SMAD system with a hydraulic retention time (HRT) of 6 h and 3 h. They were significantly higher than that in the controls (quartz sand, manganese carbonate ore, and sulfur systems). The H+ produced by the sulfur autotrophic denitrification (SAD) process promoted the release of Mn2+ in the SMAD system. And this system had a stable pH with no accumulation of NO2--N. The decrease of sulfate and formation of Mn oxides through Mn2+ electron donation confirmed the presence of the manganese autotrophic denitrification (MAD) process in the SMAD system. Dominant functional bacteria in the SMAD system were Thiobacillus, Chlorobium, and Sulfurimonas, which were linked to nitrogen, sulfur, and manganese conversion and promoted denitrification. Meanwhile, Flavobacterium participating in Mn2+ oxidation was found only in the SMAD system. The SMAD system provided a new strategy for advanced tailwater treatment.

Recent advances in the source identification and remediation techniques of nitrate contaminated groundwater: A review

Researchers have long been committed to identify nitrate sources in groundwater and to develop an advanced technique for its remediation because better apply remediation solution and management of water quality is highly dependent on the identification of the NO₃^- sources contamination in water. In this review, we systematically introduce nitrate source tracking tools used over the past ten years including dual isotope and multi isotope techniques, water chemistry profile, Bayesian mixing model, microbial tracers and land use/cover data. These techniques can be combined and exploited to track the source of NO₃^- as mineral or organic fertilizer, sewage, or atmospheric deposition. These available data have significant implications for making an appropriate measures and decisions by water managers. A continuous remediation strategy of groundwater was among the main management strategies that need to be applied in the contaminated area. Nitrate removal from groundwater can be accomplished using either separation or reduction based process. The application of these processes to nitrate removal is discussed in this review and some novel methods were presented for the first time. Moreover, the advantages and limitations of each approach are critically summarized and based on our own understanding of the subject some solutions to overcomes their drawbacks are recommended. Advanced techniques are capable to attain significantly higher nitrate and other co-contaminants removal from groundwater. However, the challenges of by-products generation and high energy consumption need to be addressed in implementing these technologies for groundwater remediation for potable use.

Anaerobic microbial manganese oxidation and reduction: A critical review

Manganese is a vital heavy metal abundant in terrestrial and aquatic environments. Anaerobic manganese redox reactions mediated by microorganisms have been recognized for a long time, which promote elements mobility and bioavailability in the environment. Biological anaerobic redox of manganese serves two reactions, including Mn(II) oxidation and Mn(IV) reduction. This review provides a comprehensive analysis of manganese redox cycles in the environment, closely related to greenhouse gas mitigation, the fate of nutrients, microbial bioremediation, and global biogeochemical cycle, including nitrogen, sulfur, and carbon. The oxidation and reduction of manganese occur cyclically and simultaneously in the environment. Anaerobic reduction of Mn(IV) receives electrons from methane, ammonium and sulfide, while Mn(II) can function as an electron source for manganese-oxidizing microorganisms for autotrophic denitrification and photosynthesis. The anaerobic redox transition between Mn(II) and Mn(IV) promotes a dynamic biogeochemical cycle coupled to microorganisms in water, soil and sediment environments. The discussion of reaction mechanisms, microorganism diversity, environmental influence bioremediation and application identify the research gaps for future investigation, which provides promising opportunities for further development of biotechnological applications to remediate contaminated environments.

Enhanced microbial nitrate reduction using natural manganese oxide ore as an electron donor

Nitrate contamination of groundwater is a global problem. Enhanced biological nitrate reduction by liquid organics combined with low-cost natural materials (as electron donors) can cost-effectively remove nitrate from groundwater. Dissolved Mn(II) as an electron donor has been thoroughly investigated to support microbial nitrate reduction. However, most Mn in soil and sediments is in solid form, and the ability of solid-phase natural manganese oxide ore (NMO) as electron donor and for supporting microbial nitrate reduction is unknown. Therefore, a microcosm experiment was conducted to bridge this gap in knowledge. The results demonstrated that microbial nitrate reduction (mainly converted to nitrite) was enhanced by NMO (rich in cryptomelane). The electrochemical and X-ray photoelectron spectroscopy analyses suggested that NMO may be oxidized by microbial metabolism. Illumina Miseq sequencing results indicated that Acidovorax spp. played a crucial role in NMO-supported nitrate reduction. Further Phylogenetic Investigation of Communities by Reconstruction of Unobserved States (PICRUSt) analyses indicated that bacterial extracellular electron transfer may be one of the mechanisms for the microbial NMO oxidation. The results of our study highlight the potential importance of NMO in nitrate reduction in the natural environment and may pave the way for NMO-assisted technology for nitrate removal from groundwater with less usage of organic electron donors.

Enhancing nitrate removal from wastewater by integrating heterotrophic and autotrophic denitrification coupled manganese oxidation process (IHAD-MnO): Internal carbon utilization performance

Due to cause the deterioration of water quality and can produce toxic nitrite, the nitrate constituted of great threatens to human health and eco-systematic safety. Among most well-known biotechnology to remove nitrate, the integrated heterotrophic and autotrophic denitrification (IHAD) process is promising, especially for the organic-limited polluted water. In this work, the IHAD coupled manganese oxidation (IHAD-MnO) process was developed by using Pseudomonas sp. SZF15 (Gram negative strain, and rod-shaped morphology with 2.3 μm in length) in the glass serum bottles. It was found that limited organic content could accelerate nitrate removal rate, and manganese oxidation efficiency can reach up to 60.08%. To further explain carbon conversion characteristics of the process, pure heterotrophic condition assays were conducted, the results confirmed that inorganic carbon will be generated by organic carbon metabolism in heterotrophic condition, the maximum accumulation content of inorganic carbon was 142.21 mg/L (when the initial organic carbon level was 293 mg-C/L). Subsequently, since the consumption of organic carbon, biogenic inorganic carbon can be further utilized by microorganisms to support autotrophic denitrification (AuDN). Besides, X-ray photoelectron spectroscopy (XPS) was employed to analyze precipitation products produced from the process. The magnified Mn 2p spectra results showed that a typical characteristic peak of manganese dioxide was observed with the intense peak at 641.8 eV and a satellite peak at 653.7 eV, respectively. This showed that Mn(II) was oxidized to manganese dioxide by the process, which may be a functional material with adsorption properties. The process posed a highly efficient and cost effective solution with less carbon consumption and less greenhouse gas emission for sustainable water treatment technologies.

Application of biogenic iron precipitation by strain H117 for tetracycline removal: mechanism of adsorption and activation

To date, biogenic metals have opened up a window for new applications in adsorption of contaminants. But there is still little attention to be paid in the removal of tetracycline (TC) by biogenic iron precipitation (BIP). In this paper, the BIP, from iron-based mixotrophic denitrification batch reactor, was estimated for its adsorption property of TC under various parameters to simulate the behavior in aquatic environment. The maximum adsorption capacity for TC was 195.336 mg g^-1. Analyses of spectrum verified the existence of Fe₃O₄ and FeOOH in BIP, which was the main reason for the removal of TC. The adsorption kinetic and isotherm of TC were well fitted to Elovich and Langmuir isotherm models, respectively, indicating that the adsorption process was mainly controlled by chemical adsorption. Furthermore, we proposed a potential mechanism of adsorption: a combination of cation-π, hydrogen bonding (H-bonding), and electrostatic interaction. Additionally, the activation experiment showed that BIP could enhance the degradation of TC (more than 98.00% removal within 1.0 h) by advanced oxidation process (AOP), due to the existence of FeOOH and Fe₃O₄. Considering its effectiveness in both adsorption and activation performance, BIP is highlighted as an economical and eco-friendly material for TC removal and offers a promising method to resolve sludge disposal in biological treatment of iron-rich groundwater.

An overview on heavy metal resistant microorganisms for simultaneous treatment of multiple chemical pollutants at co-contaminated sites, and their multipurpose application

Anthropogenic imbalance of chemical pollutants in environment raises serious threat to all life forms. Contaminated sites often possess multiple heavy metals and other types of pollutants. Elimination of chemical pollutants at co-contaminated sites is imperative for the safe ecosystem functions, and simultaneous removal approach is an attractive scheme for their remediation. Different conventional techniques have been applied as concomitant treatment solution but fall short at various parameters. In parallel, use of microorganisms offers an innovative, cost effective and ecofriendly approach for simultaneous treatment of various chemical pollutants. However, microbiostasis due to harmful effects of heavy metals or other contaminants is a serious bottleneck facing remediation practices in co-contaminated sites. But certain microorganisms have unique mechanisms to resist heavy metals, and can act on different noxious wastes. Considering this significant, my review provides information on different heavy metal resistant microorganisms for bioremediation of different chemical pollutants, and other assistance. In this favour, the integrated approach of simultaneous treatment of multiple heavy metals and other environmental contaminants using different heavy metal resistant microorganisms is summarized. Further, the discussion also intends toward the use of heavy metal resistant microorganisms associated with industrial and environmental applications, and healthcare. PREFACE: Simultaneous treatment of multiple chemical pollutants using microorganisms is relatively a new approach. Therefore, this subject was not well received for review before. Also, multipurpose application of heavy metal microorganisms has certainly not considered for review. In this regard, this review attempts to gather information on recent progress on studies on different heavy metal resistant microorganisms for their potential of treatment of co-contaminated sites, and multipurpose application.