Magnetic-activated carbon composites derived from iron sludge and biological sludge for sulfonamide antibiotic removal

Transforming drinking water treatment residuals into efficient adsorbents: A review of activation and modification methods

The management of drinking water treatment residuals (DWTRs) poses significant environmental and economic challenges for water treatment facilities; however, these residues have considerable potential as effective adsorbents for pollutant removal. The objectives of this review are to evaluate research conducted from 2015 to 2024 on treatment and modification techniques aimed at enhancing DWTRs' efficacy as adsorbents, analyze the influence of preparation methods on DWTRs performance, evaluate DWTRs adsorbents for different pollutants, and discuss the limitations and challenges in DWTRs applications. The review addresses the knowledge gap by detailed analysis of these advanced modification methods, which have not been extensively reviewed before, and their direct impact on the physicochemical properties and adsorption performance of DWTRs. The review explores various methods including thermal treatment, chemical activation, granulation, pelletization, and the development of composite materials. Key findings indicate that thermal treatment significantly increases surface area and porosity, while chemical activation introduces functional groups that enhance adsorption capacity. Composite DWTRs, incorporating metals, organic compounds, or magnetic properties, demonstrate superior performance in adsorbing diverse contaminants such as dyes and heavy metals. Despite these advancements, challenges remain, particularly in reporting the life cycles and costs of the treated and modified DWTRs and the regeneration of spent adsorbents. The review highlights the importance of optimizing preparation techniques to enhance the physicochemical properties and adsorption performance of DWTRs. By synthesizing existing knowledge and identifying key areas for future research, this review aims to advance sustainable practices in water treatment and resource recovery, aligning with global sustainability goals.

Removal of tetracycline from the aquatic environment using activated carbon: A comparative study of adsorption performance based on the activator agents

This research focus endeavour to compare the remediation of tetracycline (TC) through activated carbon (AC), crafted utilizing two distinct chemical activators: zinc chloride (ACZ), and potassium hydroxide (ACK), using pine cone biowaste as an effective carbon precursor, followed by microwave-assisted activation. The impact of TC removal by ACZ and ACK adsorbents was thoroughly examined. The influence of pH, adsorbent mass, adsorption isotherms, kinetics, and inclusive thermodynamics were studied. Our results revealed that the interaction between TC and ACZ or ACK adsorbents aligned well with the model of pseudo-second-order kinetics, whilst the Langmuir model fitted the adsorption isotherm data of ACZ and ACK. The ACZ have a maximum adsorption capacity of 327.87 mg/g compared to that of the ACK (283.29 mg/g). Adsorption of TC was facilitated by the suitable pore volume, abundant microporous, and mesoporous structure of these adsorbents. The ACZ adsorbent is abundant in oxygen-containing functional groups, compared to ACK with minimized reactive sites, in bonding with the TC molecules through hydrogen bonding, for faster removal of TC. Our finding from this work further highlights that the synthesized ACZ from pine cones evidenced significant environmental potentials in the elimination of antibiotics from aqueous solution, to promote clean application perspectives.

From wastewater to clean water: Recent advances on the removal of metronidazole, ciprofloxacin, and sulfamethoxazole antibiotics from water through adsorption and advanced oxidation processes (AOPs)

Antibiotics released into water sources pose significant risks to both human health and the environment. This comprehensive review meticulously examines the ecotoxicological impacts of three prevalent antibiotics-ciprofloxacin, metronidazole, and sulfamethoxazole-on the ecosystems. Within this framework, our primary focus revolves around the key remediation technologies: adsorption and advanced oxidation processes (AOPs). In this context, an array of adsorbents is explored, spanning diverse classes such as biomass-derived biosorbents, graphene-based adsorbents, MXene-based adsorbents, silica gels, carbon nanotubes, carbon-based adsorbents, metal-organic frameworks (MOFs), carbon nanofibers, biochar, metal oxides, and nanocomposites. On the flip side, the review meticulously examines the main AOPs widely employed in water treatment. This includes a thorough analysis of ozonation (O3), the photo-Fenton process, UV/hydrogen peroxide (UV/H2O2), TiO2 photocatalysis, ozone/UV (O3/UV), radiation-induced AOPs, and sonolysis. Furthermore, the review provides in-depth insights into equilibrium isotherm and kinetic models as well as prospects and challenges inherent in these cutting-edge processes. By doing so, this review aims to empower readers with a profound understanding, enabling them to determine research gaps and pioneer innovative treatment methodologies for water contaminated with antibiotics.

A review on carbon-based biowaste and organic polymer materials for sustainable treatment of sulfonamides from pharmaceutical wastewater

Frequent detection of sulfonamides (SAs) pharmaceuticals in wastewater has necessitated the discovery of suitable technology for their sustainable remediation. Adsorption has been widely investigated due to its effectiveness, simplicity, and availability of various adsorbent materials from natural and artificial sources. This review highlighted the potentials of carbon-based adsorbents derived from agricultural wastes such as lignocellulose, biochar, activated carbon, carbon nanotubes graphene materials as well as organic polymers such as chitosan, molecularly imprinted polymers, metal, and covalent frameworks for SAs removal from wastewater. The promising features of these materials including higher porosity, rich carbon-content, robustness, good stability as well as ease of modification have been emphasized. Thus, the materials have demonstrated excellent performance towards the SAs removal, attributed to their porous nature that provided sufficient active sites for the adsorption of SAs molecules. The modification of physico-chemical features of the materials have been discussed as efficient means for enhancing their adsorption and reusable performance. The article also proposed various interactive mechanisms for the SAs adsorption. Lastly, the prospects and challenges have been highlighted to expand the knowledge gap on the application of the materials for the sustainable removal of the SAs.

Bamboo-based magnetic activated carbon for efficient removal of sulfadiazine: Application and adsorption mechanism

Due to increasing antibiotic pollution in the water environment, green and efficient adsorbents are urgently needed to solve this problem. Here we prepare magnetic bamboo-based activated carbon (MDBAC) through delignification and carbonization using ZnCl₂ as activator, resulting in production of an activated carbon with large specific surface area (1388.83 m² g^-1). The influencing factors, such as solution pH, initial sulfadiazine (SD) concentration, temperature, and contact time, were assessed in batch adsorption experiments. The Langmuir isotherm model demonstrated that MDBAC adsorption capacity on SD was 645.08 mg g^-1 at its maximum, being higher than majority of previously reported adsorbents. In SD adsorption, the kinetic adsorption process closely followed the pseudo-second kinetic model, and the thermodynamic adsorption process was discovered to be exothermic and spontaneous in nature. The MDBAC exhibited excellent physicochemical stability, facile magnetic recovery and acceptable recyclability properties. Moreover, the synergistic interactions between MDBAC and SD mainly involved electrostatic forces, hydrogen bonding, π-π stacking, and chelation. Within the benefits of low cost, ease of production and excellent adsorption performance, the MDBAC biosorbent shows promising utilization in removing antibiotic contaminants from wastewater.

Adsorption kinetics of 20 glucocorticoids at environmentally relevant concentrations in wastewater by powdered activated carbons and development of surrogate models

Glucocorticoids (GCs) are widely used in the treatment of the coronavirus disease of 2019 (COVID-19), and the toxicity of GCs to aquatic organisms has aroused widespread concern. Powdered activated carbon (PAC) has proven effective in removing various trace organic pollutants. In this study, the adsorption behaviors of 20 typical GCs onto PACs were investigated at environmentally relevant concentrations (ng/L) in real wastewater, using four commercially available PACs (HDB, WPH, 20BF, PWA). The results showed that PAC adsorption was feasible for GC removal at ng/L concentrations. After adsorption for 60 min, the GC removal efficiencies obtained by HDB, WPH, 20BF, and PWA were 90-98 %, 89-97 %, 84-96 %, and 71-90 %, respectively. The adsorption processes of 20 GCs on PACs were well fitted by the pseudo-second-order kinetics model (with R ² >0.98). Among the four PACs, HDB achieved the highest rates because of the electrostatic attraction between HDB (positively charged) and the complex of GCs and natural organic matter (GC-NOM, negatively charged). Among the 20 GCs, compounds with substitutions of halogen atoms or five-membered rings at C-17 achieved higher adsorption rates because of the enhanced formation of hydrogen bonds and a resulting increase in electron density. In addition, surrogate models with total fluorescence (TF) and ultraviolet absorbance at 254 nm (UV₂₅₄) were developed to monitor the attenuation trend of GCs during adsorption processes. Compared with the UV₂₅₄ model, the TF model showed better sensitivity to GC monitoring, which could greatly simplify the water quality monitoring process and facilitate online monitoring of GCs in water.

A sustainable reuse strategy of converting waste activated sludge into biochar for contaminants removal from water: Modifications, applications and perspectives

Conversion of sewage sludge to biochar for contaminants removal from water achieves the dual purpose of solid waste reuse and pollution elimination, in line with the concept of circular economy and carbon neutrality. However, the current understanding of sludge-derived biochar (SDB) for wastewater treatment is still limited, with a lack of summary regarding the effect of modification on the mechanism of SDB adsorption/catalytic removal aqueous contaminants. To advance knowledge in this aspect, this paper systematically reviews the recent studies on the use of (modified) SDB as adsorbents and in persulfate-based advanced oxidation processes (PS-AOPs) as catalysts for the contaminants removal from water over the past five years. Unmodified SDB not only exhibits stronger cation exchange and surface precipitation for heavy metals due to its nitrogen/mineral-rich properties, but also can provide abundant catalytic active sites for PS. An emphatic summary of how certain adsorption removal mechanisms of SDB or its catalytic performance in PS-AOPs can be enhanced by targeted regulation/modification such as increasing the specific surface area, functional groups, graphitization degree, N-doping or transition metal loading is presented. The interference of inorganic ions/natural organic matter is one of the unavoidable challenges that SDB is used for adsorption/catalytic removal of contaminants in real wastewater. Finally, this paper presents the future perspectives of SDB in the field of wastewater treatment. This review can contribute forefront knowledge and new ideas for advancing sludge treatment toward sustainable green circular economy.

Removal of sulfanilamide by tailor-made magnetic metal-ceramic nanocomposite adsorbents

Three tailor-made magnetic metal-ceramic nanocomposites, obtained from zeolite A (ZA1 and ZA2) and a natural clinoptilolite (LB1), have been used as adsorbents to remove sulfanilamide (SA), a sulfonamide antibiotic of common use, from water. A patented process for the synthesis of nanocomposites has been suitably modified to maximize the efficiency of the SA removal, as well as to extend the applicability of the materials. The role played by the main process parameters (kinetic, pH, initial concentration of SA) has been characterized. The significant effect of the pH on the SA removal has been explained identifying two possibly coexisting mechanisms of SA adsorption, based on polar and hydrophobic interactions, respectively. The adsorption kinetics have been in all cases described by the pseudo second-order model. The adsorption isotherms obtained with ZA1 have been satisfactorily described by the Langmuir model, suggesting a monolayer adsorption of SA on the magnetic nanocomposites resulting from a uniform surface energy. The isotherms obtained with LB1 could be described by a more complex approach, deriving by the additive superposition of Langmuir and Sips models. In order to ensure an effective removal of the antibiotic and a proper recycle of the magnetic adsorbents, a sustainable regeneration procedure of the exhausted adsorbent has been developed, based on the treatment with a dilute solution of NaOH.

Facile route for synthesis of Fe0/Fe3C/γ-Fe2O3 carbon composite using hydrothermal carbonization of sugarcane bagasse and its use as effective adsorbent for sulfamethoxazole removal

Non-toxic mesoporous magnetic carbon composite was synthesised from hydrothermal carbonization of sugarcane bagasse with Iron (III) nitrate nonahydrate in two steps along with thermo-chemical oxidation process using sodium hydroxide. IR spectrum exposed the presence of oxygenated functional groups and FeO whereas XRD analysis revealed the availability of Fe⁰/Fe₃C/γ-Fe₂O₃ at varying intensities. SEM analysis showed the spherical shaped carbon is well encapsulated with iron particles. Textural studies showed that after thermo-chemical activation intensified the surface area on composites to about 491.474 m² g^-1 thereby, promoting improved porosity on the carbon matrix. The fabricated composite showed magnetization of 32.84 emu g^-1 and SMX adsorption capacity as 169.49 mg g^-1. Kinetics and isotherm studies revealed that removal of SMX fitted well in Pseudo-second order and Langmuir models. The mode of interaction of SMX on magnetic carbon composites with respect to different pH was studied showing that π-π electron donor interaction (EDA), hydrophobic interaction, charge assisted hydrogen bond formation were responsible for SMX removal. The selectivity nature of magnetic composite with respect to SMX was studied in the presence of multiple pollutant. Use of magnetic carbon helps in industrialising the material to high level due to their unique property in separation and recycling. Application of hydrothermal carbonization is found to be applicable for wet solid substance thereby evolving structural carbon compound.

Adsorption of Sulfonamides in Aqueous Solution on Reusable Coconut-Shell Biochar Modified by Alkaline Activation and Magnetization

Biochar is a low-cost adsorbent for sorptive removal of antibiotics from wastewater, but the adsorption efficiency needs to be improved. In this study, coconut-shell biochar was activated with KOH to improve the adsorption efficiency and magnetically modified with FeCl3 to enable recycling. The amount of KOH and the concentration of FeCl3 were optimized to reduce the pollution and production cost. The KOH-activated and FeCl3-magnetized biochar gave good sulfonamide antibiotic (SA) removal. The maximum adsorption capacities for sulfadiazine, sulfamethazine and sulfamethoxazole were 294.12, 400.00 and 454.55 mg g-1, respectively, i.e., five to seven times higher than those achieved with raw biochar. More than 80% of the adsorption capacity was retained after three consecutive adsorption-desorption cycles. A combination of scanning electron microscopy, Brunauer-Emmett-Teller analysis, X-ray diffraction, Fourier-transform infrared and Raman spectroscopies, and magnetic hysteresis analysis showed that KOH activation increased the specific surface area, porosity, and number of oxygen-rich functional groups. Iron oxide particles, which were formed by FeCl3 magnetization, covered the biochar surface. The SAs were adsorbed on the modified biochar via hydrogen bonds between SA molecules and -OH/-COOH groups in the biochar. Investigation of the adsorption kinetics and isotherms showed that the adsorption process follows a pseudo-second-order kinetic model and a monolayer adsorption mechanism. The adsorption capacity at low pH was relatively high because of a combination of π+-π electron-donor-acceptor, charge-assisted hydrogen-bonding, electrostatic, and Lewis acid-base interactions, pore filling, van der Waals forces and hydrophobic interactions. The results of this study show that magnetically modified biochar has potential applications as an effective, recyclable adsorbent for antibiotic removal during wastewater treatment.

Engineered Magnetic Carbon-Based Adsorbents for the Removal of Water Priority Pollutants: An Overview

This review covers the preparation, characterization, and application of magnetic adsorbents obtained from carbon-based sources and their application in the adsorption of both inorganic and organic pollutants from water. Different preparation routes to obtain magnetic adsorbents from activated carbon, biochar, hydrochar, graphene, carbon dots, carbon nanotubes, and carbon nanocages, including the magnetic phase incorporated on the solid surface, are described and discussed. The performance of these adsorbents is analyzed for the removal of fluoride, arsenic, heavy metals, dyes, pesticides, pharmaceuticals, and other emerging and relevant water pollutants. Properties of these adsorbents and the corresponding adsorption mechanisms have been included in this review. Overall, this type of magnetic adsorbents offers an alternative for facing the operational problems associated to adsorption process in water treatment. However, some gaps have been identified in the proper physicochemical characterization of these adsorbents, the development of green and low-cost preparation methods for their industrial production and commercialization, the regeneration and final disposal of spent adsorbents, and their application in the multicomponent adsorption of water pollutants.