Sonochemical synthesis of graphitic carbon nitride-manganese oxide interfaces for enhanced photocatalytic degradation of tetracycline hydrochloride

Near-infrared-driven upconversion nanoparticles with photocatalysts through water-splitting towards cancer treatment

Water splitting is promising, especially for energy and environmental applications; however, there are limited studies on the link between water splitting and cancer treatment. Upconversion nanoparticles (UCNPs) can be used to convert near-infrared (NIR) light to ultraviolet (UV) or visible (Vis) light and have great potential for biomedical applications because of their profound penetration ability, theranostic approaches, low self-fluorescence background, reduced damage to biological tissue, and low toxicity. UCNPs with photocatalytic materials can enhance the photocatalytic activities that generate a shorter wavelength to increase the tissue penetration depth in the biological microenvironment under NIR light irradiation. Moreover, UCNPs with a photosensitizer can absorb NIR light and convert it into UV/vis light and emit upconverted photons, which excite the photoinitiator to create H2, O2, and/or OH˙ via water splitting processes when exposed to NIR irradiation. Therefore, combining UCNPs with intensified photocatalytic and photoinitiator materials may be a promising therapeutic approach for cancer treatment. This review provides a novel strategy for explaining the principles and mechanisms of UCNPs and NIR-driven UCNPs with photocatalytic materials through water splitting to achieve therapeutic outcomes for clinical applications. Moreover, the challenges and future perspectives of UCNP-based photocatalytic materials for water splitting for cancer treatment are discussed in this review.

Recent progress on sonochemical production for the synthesis of efficient photocatalysts and the impact of reactor design

Sonochemical-assisted synthesis has flourished recently for the design of photocatalysts. The main power used is ultrasound that allows the nanomaterials shape and size modification and control. This review highlights the effect in formation mechanism by ultrasound application and the most common photocatalysts that were prepared via sonochemical techniques. Moreover, the challenge for the suitable reactor design for the synthesis of materials or for their photocatalytic evaluation is discussed since the most prominent reactor systems, batch, and continuous flow, has both advantages and drawbacks. This work summarises the significance of sonochemical synthesis for photocatalytic materials as a green technology that needs to be further investigated for the preparation of new materials and the scale up of developed reactor systems to meet industrial needs.

In-situ development of boron doped g-C3N4 supported SBA-15 nanocomposites for photocatalytic degradation of tetracycline

In this study, versatile boron-doped graphitic carbon nitride (gCN) incorporated mesoporous SBA-15 (BGS) composite materials were prepared by thermal polycondensation method using boric acid & melamine as a B-gCN source material and SBA-15 as mesoporous support. The prepared BGS composites are utilized sustainably using solar light as the energy source for the continuous flow of photodegradation of tetracycline (TC) antibiotics. This work highlights that the photocatalysts preparation was carried out with an eco-friendly strategy, solvent-free and without additional reagents. To alter the amount of boron quantity (0.124 g, 0.248 g, and 0.49 g) have to prepare three different composites using a similar procedure, the obtained composites viz., BGS-1, BGS-2 and BGS-3, respectively. The physicochemical property of the prepared composites was investigated by X-ray diffractometry, Fourier-transform infrared spectroscopy, Raman, Diffraction reflectance spectra, Photoluminescence, Brunauer-Emmett-Teller and transmission electron microscopy (TEM). The results shows that 0.24 g boron- loaded BGS composites degrade TC up to 93.74%, which is much higher than the rest of the catalyst. The addition of mesoporous SBA-15 incresed the specific surface area of the g-CN, and heteroatom of boron increased the interplanar stracking distance of g-CN, enlarged the optical absorption range, reducing the energy bandgap and enhanced the photocatalytic activity of TC. Additionally, the stability and recycling efficiency of the representative photocatalysts viz., BGS-2 was observed to be good even at the fifth cycle. The photocatalytic process using the BGS composites demonstrated to be capable candidate for the removal of tetracycline biowaste from aquesous media.

Construction of magnetically recoverable MnZnFe2O4@Ag3PO4 Z-scheme photocatalyst for rapid visible-light-driven phenol degradation

Visible-light-driven magnetic heterojunction as a promising photocatalysts has received much attention in environmental remediation. In this work, novel Z-scheme heterojunction MnZnFe₂O₄@Ag₃PO₄ (MZFO@APO) magnetic photocatalysts with excellent visible-light-driven photocatalytic activity are successfully constructed and characterized. The photocatalytic activity for phenol degradation is measured, and photodegradation mechanism is investigated with EPR, radical trapping experiments, and LC-MS. It turns out that the heterojunction introduced MZFO exhibits good adsorption effect on visible light and the direct Z-scheme bandgap alignment of MZFO and APO significantly improves charge separation and electron transfer, outperforming that of pure APO. MZFO@APO-40% with 40% APO content shows the rapid photodegradation performance, obtaining a 100% removal efficiency of phenol (25 mg L^-1) after 12-min visible light irradiation, and its kinetic constants are approximately 25.3 and 4.9 times higher than that of P25 TiO₂ and pure APO, respectively. Especially, MZFO@APO-40% also possesses a high magnetic separation property and can be efficiently reused for 5 cycles. Additionally, EPR and radical trapping experiments confirm that h⁺, O₂^-, and ¹O₂ are the main active species in the photocatalytic process. Hydroquinone and small molecular organic acids such as maleic acid and oxalic acid are detected by LC-MS, which further indicates that the pathway of phenol degradation involves hydroxylation, open-ring reactions, and mineralization reactions. The novel addition of MZFO in photocatalyst construction has the potential to promote its application in environmental remediation.

Pyrolysis temperature affects the physiochemical characteristics of lanthanum-modified biochar derived from orange peels: Insights into the mechanisms of tetracycline adsorption by spectroscopic analysis and theoretical calculations

Biochar (BC) derived from orange peels was modified using LaCl₃ to enhance its tetracycline (TC) adsorption capacity. SEM-EDS, FT-IR, XRD, and BET were used to characterize the physiochemical characteristics of La-modified biochar (La-BC). Batch experiments were conducted to investigate the effects of several variables like pyrolysis temperature, adsorbent dosage, initial pH, and coexisting ions on the adsorption of TC by La-BC. XPS and density functional theory (DFT) were used to elucidate the TC adsorption mechanism of La-BC. The results demonstrated that La was uniformly coated on the surface of the La-BC. The physiochemical characteristics of La-BC highly depended on pyrolysis temperature. Higher temperature increased the specific surface area and functional groups of La-BC, thus enhancing its TC adsorption capacity. La-BC prepared at 700 °C (BC@La-700) achieved the maximum adsorption capacity of 143.20 mg/g, which was 6.8 and 4.6 times higher than that of BC@La-500 and BC@La-600, respectively. The mechanisms of TC adsorption by La-BC were most accurately described by the pseudo-second-order kinetic model. Furthermore, the adsorption isotherm of La-BC was consistent with the Freundlich model. BC@La-700 achieved good TC adsorption efficiencies even at a wide pH range (pH 4-10). Humic acid significantly inhibited TC adsorption by La-BC. The presence of coexisting ions (NH₄⁺, Ca²⁺, NO₃^-) did not significantly affect the adsorption capacity of La-BC, particularly BC@La-700. Moreover, BC@La-700 also exhibited the best recycling performance, which achieved relative high adsorption capacity even after 5 cycles. The XPS results showed that π-π bonds, oxygen-containing functional groups, and La played a major role in the adsorption of TC on La-BC. The result of DFT showed that the adsorption energy of La-BC was the greatest than that of other functional groups on biochar. Collectively, our findings provide a theoretical basis for the development of La-BC based materials to remove TC from wastewater.

Preparation of MnO2-Carbon Materials and Their Applications in Photocatalytic Water Treatment

Water pollution is one of the most important problems in the field of environmental protection in the whole world, and organic pollution is a critical one for wastewater pollution problems. How to solve the problem effectively has triggered a common concern in the area of environmental protection nowadays. Around this problem, scientists have carried out a lot of research; due to the advantages of high efficiency, a lack of secondary pollution, and low cost, photocatalytic technology has attracted more and more attention. In the past, MnO₂ was seldom used in the field of water pollution treatment due to its easy agglomeration and low catalytic activity at low temperatures. With the development of carbon materials, it was found that the composite of carbon materials and MnO₂ could overcome the above defects, and the composite had good photocatalytic performance, and the research on the photocatalytic performance of MnO₂-carbon materials has gradually become a research hotspot in recent years. This review covers recent progress on MnO₂-carbon materials for photocatalytic water treatment. We focus on the preparation methods of MnO₂ and different kinds of carbon material composites and the application of composite materials in the removal of phenolic compounds, antibiotics, organic dyes, and heavy metal ions in water. Finally, we present our perspective on the challenges and future research directions of MnO₂-carbon materials in the field of environmental applications.

Photocatalytic degradation of lomefloxacin antibiotics using hydrothermally synthesized magnesium titanate under visible light-driven energy sources

Antibiotics in water system pose a human health risk due to the rise of antibacterial activity in the environmental web. Advanced oxidation processes are the potential to become an effective treatment technology for targeting antibiotics. This study demonstrates the visible light photocatalysis of lomefloxacin using magnesium titanate (MgTiO₃). The nanomaterial was subjected to computational analysis to study morphology, functional, and optical characteristics through FESEM, XRD, FTIR, BET, UV-Vis, etc. Importantly, MgTiO₃ had band gap energy of 3.09 eV. The photocatalytic studies were performed to observe different parameters affecting lomefloxacin degradation such as initial concentration, catalyst dosage, and pH. The nanomaterial exhibited the maximum lomefloxacin degradation. The study revealed that 30 mg/L of catalyst was optimum to degrade 10 mg/L of lomefloxacin with 30-W LED irradiation up to 150 min. Reactive species, namely, electron, hole, hydroxyl, and superoxide radicals, comprised the primary photocatalytic mechanism for lomefloxacin degradation. Ultimately, the summative result from this study highlights the suitability of the photocatalytic system to treat persistent antibiotics in aqueous environment.

Bi@BiOx(OH)y modified oxidized g-C3N4 photocatalytic removal of tetracycline hydrochloride with highly effective oxygen activation

A novel Bi@BiOx(OH)y-modified oxidized g-C₃N₄ photocatalyst was successfully prepared via wet chemical reduction under alkaline conditions for the tetracycline hydrochloride removal. The prepared materials were characterized comprehensively and fully. Sufficient structural representation analyses confirmed the successful loading of Bi in the form of Bi@BiOx(OH)y complex beads. Based on basic photocatalytic studies, 10% (mass percentage) was found to be the best metal Bi loading. DRS, PL, transient photocurrent and EIS have explored the improvement of the photochemical properties of materials by loading Bi@BiOx(OH)y groups, particularly the improvement of photocatalytic properties by the SPR effect and electron traps. 10%Bi-OxCN exhibited the most suitable particle size of nonagglomerated Bi-metal groups, the largest specific surface area (43.53 m² g^-1), the most adsorption sites and the most significant photocurrent (8.694 × 10^-2 mA cm^-2) (7.78 times that of OxCN). This indicated that 10%Bi-OxCN had good adsorption capacity and excellent light response capability. In addition, 10%Bi-OxCN showed the best tetracycline hydrochloride removal efficiency (96.0%), with ∙O₂^- as the main active substance and ¹O₂ as the second most important substance made of ∙O₂^- and h⁺. The excellent photocatalytic effect and good reusability were fundamentally dependent on the modification of OxCN by Bi@BiOx(OH)y groups to produce a large number of active substances (including the separation efficiency of electron-hole pairs and the generation efficiency of ∙O₂^- and ¹O₂). These advantages are all related to the high specific surface area, a large number of active sites, narrow bandgap width, Bi-SPR effect, and BiOx(OH)y electron trap caused by successful loading of Bi groups.

MOF-5 derived ZnO-C nanoparticles combined with α-MnO2 for efficient degradation of tetracycline under visible light

A multifunctional α-MnO2/ZnO-C (MZ) Z-scheme photocatalyst was synthesized by suit-growth of α-MnO2 on the surface of MOF-5 and pyrolysis of the organic components in a certain condition. The obtained photocatalysts...

Recent advances in photocatalytic remediation of emerging organic pollutants using semiconducting metal oxides: an overview

Many untreated and partly treated wastewater from the home and commercial resources is being discharged into the aquatic environment these days, which contains numerous unknown and complex natural and inorganic compounds. These compounds tend to persist, initiating severe environmental problems, which affect human health. Conventionally, physicochemical treatment methods were adopted to remove such complex organic chemicals, but they suffer from critical limitations. Over time, photocatalysis, an advanced oxidation process, has gained its position for its efficient and fair performance against emerging organic pollutant decontamination. Typically, photocatalysis is a green technology to decompose organics under UV/visible light at ambient conditions. Semiconducting nanometal oxides have emerged as pioneering photocatalysts because of large active surface sites, flexible oxidation states, various morphologies, and easy preparation. The current review presents an overview of emerging organic pollutants and their effects, advanced oxidation processes, photocatalytic mechanism, types of photocatalysts, photocatalyst support materials, and methods for improving photodegradation efficiency on the degradation of complex emerging organic pollutants. In addition, the recent reports of metal-oxide-driven photocatalytic remediation of emerging organic pollutants are presented in brief. This review is anticipated to reach a broader scientific community to understand the first principles of photocatalysis and review the recent advancements in this field.

Magnetic porous biochar as a renewable and highly effective adsorbent for the removal of tetracycline hydrochloride in water

In this study, discarded cigarette butts were used as a precursor for preparing magnetic porous biochar with a facile annealing method. The magnetic porous biochar was applied to remove tetracycline hydrochloride (TCH) from aqueous solution. It exhibited excellent adsorption capacity for TCH, which was much higher than various similar materials reported. At the same time, the adsorption kinetics and adsorption isotherms of TCH were well fitted to the pseudo-second-order models and Freundlich models, respectively. The thermodynamics experiments proved that the adsorption on magnetic porous biochar was an endothermic reaction. Furthermore, the adsorption mechanism was explored, and the outstanding adsorption ability was mainly dependent on the pore filling effect, electrostatic interaction, and π-π interaction. By using the magnetic porous biochar, the real water samples were treated and high removal efficiency to TCH was obtained. What's more, the excellent reusability endowed the magnetic porous biochar with great potential as adsorbents for practical application.

Carbon nitride-based photocatalysts for the mitigation of water pollution engendered by pharmaceutical compounds

In recent decades, the destructive impact of active pharmaceutical ingredients (API) present in surface and drinking water on aquatic and terrestrial life forms becomes a major concern of researchers. API like diclofenac (DCF), carbamazepine (CBZ), tetracycline (TC), and sulfamethoxazole (SME) found in water bodies cause antimicrobial resistance and are potent carcinogens and endocrine disruptors. Conventional wastewater treatment methods possess some drawbacks and were found to be insufficient for the effective removal of APIs. Visible light-assisted semiconductor photocatalysis has become an alternative choice for tackling this worse scenario. Graphitic carbon nitride, a metal-free visible light active semiconductor photocatalyst is an emerging hotspot nanomaterial whose practical utility in water purification is widely recognized. This review comes up with an insightful outlook on the panorama of recent progress in the field of g-C₃N₄-assisted photocatalytic systems for the eradication of APIs. In addition, the review summarizes various strategies adopted for the broad-spectrum utilization of visible light and the enhancement of charge separation of pristine g-C₃N₄. The mechanistic pathways followed by different pharmaceuticals during their photocatalytic degradation process were also briefly discussed.