Abundance, morphology, and removal efficiency of microplastics in two wastewater treatment plants in Nanjing, China

Fibrous microplastics in the environment: Sources, occurrence, impacts, and mitigation strategies

Fibrous microplastics (FMPs), a unique class of microplastics, are increasingly recognized as a significant environmental threat due to their ubiquitous presence and potential risks to ecological and human health. This review provides a comprehensive overview of FMPs, including their sources, prevalence in various environmental media, and potential impacts. FMPs, which can be found in over 90 % of certain environmental samples, originate from a diverse range of sources, including synthetic textiles, landfill waste, industrial emissions, and atmospheric deposition. These persistent pollutants pose a threat to both terrestrial and marine ecosystems. Their insidious presence can lead to ingestion by organisms, potentially disrupting ecosystems and posing risks to human health. Addressing the challenge of FMPs requires a multi-faceted approach. Reducing the production and use of synthetic fibers, implementing effective waste management practices, and developing new technologies to remove FMPs from wastewater and the broader environment are all crucial components of the solution. However, further research is essential to fully understand the long-term implications of FMPs on ecosystems and human health, laying the foundation for the development of robust and effective mitigation strategies.

Microplastic characterization and assessment of removal efficiency in an urban and industrial wastewater treatment plant with submarine emission discharge

Wastewater treatment plants (WWTPs) are significant contributors to microplastic (MP) pollution in marine ecosystems when they are inefficient. This study aimed to evaluate the effectiveness of microplastic removal from the effluent of the Anza WWTP (Morocco), which processes industrial and urban wastewater using a lamellar decantation system combined with a submarine emissary for treated water discharge. Additionally, this study investigated the presence of microplastics in the Atlantic seawater where treatment plant effluent is released. Microplastics were collected and extracted from wastewater and seawater samples to assess their abundance, shape, size, polymer type, and removal rates in the treatment plant. The findings revealed an average MP concentration of 1114 ± 90 MPs/L in the influent and 607 ± 101 MPs/L in the effluent, indicating a removal efficiency of 46 %. Seasonal analysis revealed the highest MP concentrations during the summer, with 2181.33 MPs/L in the influent and 1209 MPs/L in the effluent. Seawater samples from the discharge zone of the submarine emissary had an average MP concentration of 1600 MPs/m3. Characterization of the MPs revealed that fibers were the most common form of MPs in all the samples. The 500-100 μm size fraction was predominant in the WWTP samples, while MPs smaller than 1 mm were more abundant in the seawater samples. Seven polymer types were identified using attenuated total reflection fourier transform infrared spectroscopy (ATR-FTIR), with PET, PE, PVC, PA, PS, PP, and EVA being the most prevalent. Scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM/EDX) revealed various degrees of weathering and chemical elements adhering to the MP surfaces. The results of this study provide valuable insights into the effectiveness of conventional treatment systems in removing microplastics and offer a reference for developing management strategies to mitigate MP pollution in Morocco's marine ecosystems.

Innovative solutions for the removal of emerging microplastics from water by utilizing advanced techniques

Microplastic pollution is one of the most pressing global environmental problems due to its harmful effects on living organisms and ecosystems. To address this issue, researchers have explored several techniques to successfully eliminate microplastics from water sources. Chemical coagulation, electrocoagulation, magnetic extraction, adsorption, photocatalytic degradation, and biodegradation are some of the recognized techniques used for the removal of microplastics from water. In addition, membrane-based techniques encompass processes propelled by pressure or potential, along with sophisticated membrane technologies like the dynamic membrane and the membrane bioreactor. Recently, researchers have been developing advanced membranes composed of metal-organic frameworks, MXene, zeolites, carbon nanomaterials, metals, and metal oxides to remove microplastics. This paper aims to analyze the effectiveness, advantages, and drawbacks of each method to provide insights into their application for reducing microplastic pollution.

Microplastics: A potential proxy for tracing extreme flood events in estuarine environments

The transport of microplastics (MPs) is susceptible to being influenced by catchment hydrology; however, there is a notable lack of research on their retention and responses to flood events in estuarine sedimentary records. Herein, we collected two cores in the Yangtze Estuary to explore their microplastic pollution, influencing factors and linkage to flood events. MP abundance exhibited a decreasing trend from the top to the bottom in both cores. Both plastic production and sediment mean grain size showed a significant positive correlation with MP abundance. The sedimentary record displayed a marked surge in MP abundance during the extreme flood period, suggesting a direct influence of flooding on MP deposition. The resuspension of upstream MPs and erosion of land-based MPs by heavy rain might be responsible for this increase. Furthermore, our study identified significant periodicities in MP abundance, closely aligned with the hydrological patterns of the Yangtze River. This study highlights the role of floods in fluvial MP distribution and proposes MPs as a proxy of extreme floods from the 20th century in estuarine environments.

Microplastic removal and management strategies for wastewater treatment plants

Discharging microplastics into the environment with treated wastewater is becoming a major concern around the world. Wastewater treatment plants (WWTPs) release microplastics into terrestrial and aquatic habitats, mostly from textile, laundry, and cosmetic industries. Despite extensive research on microplastics in the environment, their removal, and WWTP management strategies, highlighting their environmental effects, little is known about microplastics' fate and behaviour during various treatment processes. Microplastics interact with treatment technologies differently due to their diverse physical and chemical characteristics, resulting in varying removal efficiency. Microplastics removed from WWTPs may accumulate in soil and harm terrestrial ecosystems. Few studies have examined the cost, energy use, and trade-offs of large-scale implementation of modern treatment methods for the removal of microplastics. To safeguard aquatic and terrestrial habitats from microplastics' contamination, focused and efficient management techniques must bridge these knowledge gaps. This review summarizes microplastic detection, collection, removal and management strategies. A compilation of treatment process studies on microplastics' removal efficiency and their destiny and transit paths shows recent improvement. Bioremediation, membrane bioreactor (MBR), electrocoagulation, sol-gel technique, flotation, enhanced filtering, and AOPs are evaluated for microplastic removal. The fate and behaviour of microplastics in WWTPs suggest they may be secondary suppliers of microplastics to receiving ecosystems. Innovative microplastic removal strategies and technologies such as nanoparticles, microorganism-based remediation, and tertiary treatment raise issues. These new WWTP technologies are examined for feasibility, limitations, and implementation issues. Pretreatment modifies microplastic size, adsorption potential, and surface morphology to remove microplastics from WWTPs. Membrane bioreactors (MBR) can remove 99.9% of microplastics more efficiently than other approaches. MBR systems require membrane cleaning and fouling control, which raises operational and capital costs. To reduce MPs, plastic alternatives and strict controls, including microplastic waste transformation, should be prioritized. Microplastics must be controlled through monitoring policy execution and awareness.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

Microplastic Removal in Wastewater Treatment Plants (WWTPs) by Natural Coagulation: A Literature Review

Urban industrialization has caused a ubiquity of microplastics in the environment. A large percentage of plastic waste originated from Southeast Asian countries. Microplastics arising from the primary sources of personal care items and industrial uses and the fragmentation of larger plastics have recently garnered attention due to their ubiquity. Due to the rising level of plastic waste in the environment, the bioaccumulation and biomagnification of plastics threaten aquatic and human life. Wastewater treatment plant (WWTP) effluents are one of the major sources of these plastic fragments. WWTPs in Southeast Asia contribute largely to microplastic pollution in the marine environment, and thus, further technological improvements are required to ensure the complete and efficient removal of microplastics. Coagulation is a significant process in removing microplastics, and natural coagulants are far superior to their chemical equivalents due to their non-toxicity and cost-effectiveness. A focused literature search was conducted on journal repository platforms, mainly ScienceDirect and Elsevier, and on scientific databases such as Google Scholar using the keywords Wastewater Treatment Plant, Coagulation, Microplastics, Marine Environment and Southeast Asia. The contents and results of numerous papers and research articles were reviewed, and the relevant papers were selected. The relevant findings and research data are summarized in this paper. The paper reviews (1) natural coagulants for microplastic removal and their effectiveness in removing microplastics and (2) the potential use of natural coagulants in Southeast Asian wastewater treatment plants as the abundance of natural materials readily available in the region makes it a feasible option for microplastic removal.

A standard analytical approach and establishing criteria for microplastic concentrations in wastewater, drinking water and tap water

The ubiquitous presence of microplastics (MPs) in natural water bodies reflects the global issue regarding these micropollutants. The main problem of MPs lies on the difficulty of removing these particles from water during wastewater and drinking water treatments. The release of MPs to the environment in treated wastewater contributed to the dispersion of these micropollutants, which enhances the harmful effect of MPs on fauna and flora. In addition, their presence in tap water entails a potential risk to human health since MPs can be directly consumed. The first step is being able to quantify and characterise these microparticles accurately. In this work, a comprehensive analysis on the presence of MPs in wastewater, drinking water and tap water has been conducted with emphasis on sampling methods, pre-treatment, MP size and analytical methods. Based on literature data, a standard experimental procedure has been proposed with the objective of recommending a methodology that allows the homogenisation of MP analysis in water samples. Finally, reported MP concentrations for influents and effluents of drinking and wastewater treatment plants and tap water have been analysed, in terms of abundance, ranges and average values, and a tentative classification of different waters based on their MP concentrations is proposed.

Microplastics as emergent contaminants in landfill leachate: Source, potential impact and remediation technologies

A significant amount of plastic waste is generated each year on a global scale, in which the maximum quantity of plastic waste is typically dumped in landfills in various parts of the world. Moreover, dumping plastic waste in landfills cannot address the issue of proper disposal; it simply delays the process. Exploiting waste resources entails environmental hazards because plastic wastes buried in landfills gradually break down into Microplastics (MPs) due to physical, chemical, and biological effects. The possibility of landfill leachate as a source of MPs in the environment has not received much attention. Without systematic treatment, MPs in leachate increase the risk to human health and environmental health since they contain dangerous and toxic pollutants and antibiotic resistance genes transmitted by leachate vectors. Due to their severe environmental risks, MPs are now widely recognized as emerging pollutants. Therefore, the composition of MPs in landfill leachate and the interaction of MPs with other hazardous contaminants are summarised in this review. The available potential mitigation or treatment methods of MPs in landfill leachate as of now, along with the drawbacks and challenges of the present leachate treatment for eliminating MPs, are described in this review. Since it is unclear how MPs will be removed from the current leachate facilities, it is crucial to develop innovative treatment facilities as quickly as possible. Finally, the areas that require more research to provide complete solutions to the persistent problem of plastic debris are discussed.

Distribution and removal mechanism of microplastics in urban wastewater plants systems via different processes

Microplastic pollution threatens water systems worldwide. As one of the most important parts of city wastewater treatment, wastewater treatment plants are not only microplastics interception barriers but also emission sources. Water samples were collected from each sewage treatment plant stage and sludge from the sludge dewatering room. Microplastics were extracted using wet peroxide oxidation and flotation, and the abundance, size, shape, and polymer type of microplastics were detected. Basis on the results, the influence of each process on the removal rate and characteristics of microplastics under the same influent source was analysed. The influent microplastic concentration in this study was 32.5 ± 1.0 n/L, which rapidly decreased after treatment. The removal rates of the sequencing batch reactor activated sludge, cyclic activated sludge, and anaerobic anoxic oxic technologies were 73.0%, 75.6%, and 83.9%, respectively. Most microplastics were transported to the sludge, and the concentration of microplastics in dehydrated sludge was 27.2 ± 3.1 n/g. Microplastics removal occurred primarily during the primary and secondary stages. Disposal processes, settling time, and process design affected wastewater treatment plant microplastic removal rates at each stage. Significant differences in microplastic characteristics were observed at each stage, with the most abundant being fragment shaped, particle sizes of 30-100 μm, and black in colour. Sixteen polymer types were identified using a Raman spectrometer. The predominant polymers are polypropylene, polyethylene, and polyethylene terephthalate. This study demonstrates that optimising the process design of existing wastewater treatment plants is crucial for the prevention and control of microplastic pollution. It is suggested that the process settings of contemporary wastewater treatment plants should be studied in depth to develop a scientific foundation for avoiding and managing microplastic pollution in urban areas.

Recent approaches and advanced wastewater treatment technologies for mitigating emerging microplastics contamination - A critical review

Microplastics have been identified as an emerging pollutant due to their irrefutable prevalence in air, soil, and particularly, the aquatic ecosystem. Wastewater treatment plants (WWTPs) are seen as the last line of defense which creates a barrier between microplastics and the environment. These microplastics are discharged in large quantities into aquatic bodies due to their insufficient containment during water treatment. As a result, WWTPs are regarded as point sources of microplastics release into the environment. Assessing the prevalence and behavior of microplastics in WWTPs is therefore critical for their control. The removal efficiency of microplastics was 65 %, 0.2-14 %, and 0.2-2 % after the successful primary, secondary and tertiary treatment phases in WWTPs. In this review, other than conventional treatment methods, advanced treatment methods have also been discussed. For the removal of microplastics in the size range 20-190 μm, advanced treatment methods like membrane bioreactors, rapid sand filtration, electrocoagulation and photocatalytic degradation was found to be effective and these methods helps in increasing the removal efficiency to >99 %. Bioremediation based approaches has found that sea grasses, lugworm and blue mussels has the ability to mitigate microplastics by acting as a natural trap to the microplastics pollutants and could act as candidate species for possible incorporation in WWTPs. Also, there is a need for controlling the use and unchecked release of microplastics into the environment through laws and regulations.

Pollution characteristics and ecological risk of microplastic in sediments of Liaodong Bay from the northern Bohai Sea in China

Microplastics (MPs) are widely distributed in marine environments. The pollution characteristics and risk assessment of MPs in estuarine sediments are still insufficient. In this study, the MPs pollution characteristics in surface sediments of the Liao Estuary and Daliao Estuary were investigated. The characteristics of MPs in sediments were determined by stereo microscopy and micro-Fourier transform infrared spectroscopy. The results showed that the average MPs abundance ranged from 32.33 to 49.91 items·kg^-1 d.w. The MPs were mainly composed of 500-2000 μm black and blue fibers. Five polymer types were identified, including rayon (RA) (87.46 %), polyethylene terephthalate (PET) (6.81 %), polyamide (PA) (2.94 %), polypropylene (PP) (2.17 %) and polyethylene (PE) (0.62 %). The pollution load index (PLI) risk assessment showed that all sampling sites were at Hazard Level I. Our results can provide useful information for assessing the environmental risks of MPs in coastal areas of China.

The removal of microplastics from water by coagulation: A comprehensive review

Drinking water treatment plants (DWTPs) and wastewater treatment plants (WWTPs) are the first and last hurdles for the prevention of microplastics (MPs) pollution, respectively. With coagulation as one of the most critical technologies for the removal of MPs in water treatment plants, there is an urgent need to gain an in-depth understanding of the mechanisms and influencing factors of MPs removal during coagulation. In this paper, the research progress of adopting coagulation in MPs removal in recent years is reviewed, the removal effect of coagulation in water treatment plants are compared, and the role of three coagulation mechanisms, i.e., charge neutralization, adsorption bridging, and sweep flocculation in MPs removal process are identified. The effect of coagulant performance, MPs characteristics, operation conditions and other parameters on the removal of MPs are systematically analyzed. It is found that the combined coagulation techniques have better removal efficiency, can better decrease MP pollution and meet strict discharge standards. Moreover, flaws in the application of coagulation technology are pointed out, and strategies to deal with them are also proposed. Hopefully, this review can not only contribute to a better understanding of the mechanism of MPs removal by coagulation technology, but also serve as a useful guide for future research on MPs removal.

Semi-crystalline microplastics in wastewater plant effluents and removal efficiencies of post-treatment filtration systems

Microplastics (MPs) are ubiquitous in the environment and have been found in every environmental compartment. Wastewater and wastewater treatment plants (WWTPs) have been identified as possible point sources contributing to the emission of microplastic particles (MPP) into the aquatic environment. So far, MPP in wastewater effluents have mainly been analyzed by spectroscopic methods resulting in concentrations as number per volume. In this study, we present mass concentrations in the secondary effluents of four German municipal WWTPs, removal efficiencies of seven post-treatment systems and the resulting load emissions. Differential Scanning Calorimetry (DSC) was used for the analysis of semi-crystalline MPs. The concentrations of secondary effluents ranged from 0.1 to 19.6 µg L-1. Removal efficiencies > 94% were found for a microfiltration membrane (MF), two cloth types of a pile cloth media filter (PCMF), a micro strainer, a discontinuous downflow granulated activated carbon filter (GAC) and a powdered activated carbon (PAC) stage with clarifier and rapid sand filtration. A rapid sand filter (RSF) at WWTP B showed a removal efficiency of 82.38%. Only a continuous upflow GAC filter at WWTP C proved to be unsuitable for MP removal with an average removal efficiency of 1.9%.

A global review of microplastics in wastewater treatment plants: Understanding their occurrence, fate and impact

Microplastics (MPs) are emerging as a serious environmental concern, with wastewater treatment plants (WWTPs) acting as the main entry routes for MPs into aquatic and terrestrial ecosystems. On a global scale, our literature review found that MP research in WWTPs has only been conducted on 121 WWTPs in 17 countries, with the majority of the work being done in Europe (53%), followed by the United States of America and Canada (24%), Asia (18%), and Australia (5%) in recent years. MPs in WWTPs are primarily derived from Personal Care and Cosmetic Products (PCCPs), which are primarily composed of polyethylene (PE) derivatives. Based on the studies, microfibers (57%) and fragments (47%) are observed to be the most common MP forms in influents and effluents of WWTPs. The chemical characterization of MPs detected in WWTPs, showed the occurrence of polyethylene (PE) (22%), polystyrene (PS) (21%), and polypropylene (13%). Although MP retention/removal efficiencies of different treatment technologies vary from medium to high, deliberations on sludge disposal on agricultural soils containing MPs and MP intrusion into groundwater are required to sustainably regulate MP contaminant transport. Thus, the development of efficient detection methods and understanding their fate are of immense significance for the management of MPs. Despite the fact that ongoing research in MPs and WWTPs has unquestionably improved our understanding, many questions and concerns remain unanswered. In this review, the current status of the detection, occurrence, and impact of MPs in WWTPs across the world are systematically reviewed to prioritize policy-making to recognize the WWTPs as global conduits of MPs.

Status and prospects of atmospheric microplastics: A review of methods, occurrence, composition, source and health risks

The global pollution of microplastics (MPs) has attracted widespread attention, and the atmosphere was an indispensable media for the global transmission of MPs. With the growing awareness of MPs, atmospheric microplastics (AMPs) have been proposed as a new topic in recent years. Compared with the extensive studies on MPs in Marine and terrestrial environments, the studies of AMPs remain limited. In this study, sampling and analysis methods, occurrence, source analysis and health risk of AMPs were summarized and discussed. According to the different sampling methods, AMPs can be divided into suspension microplastics (SAMPs) and deposition microplastics (DAMPs). Previous studies have shown that SAMPs and DAMPs differ in composition and abundance, with SAMPs generally having a higher fraction of fragments. The mechanism of the migration of AMPs between different media was not clear yet. We further collated global data on the composition characteristics of MPs in soil and fresh water, which showed that the fragment MPs in soil and fresh water was higher than that in the atmosphere. Polymers in soil and fresh water were mainly PP and PE, while AMPs in the atmosphere were mainly PET. The shape composition of the MPs in both atmospheric and freshwater systems suggests that there may be the same dominant factor. The transport of AMPs and source apportionment were the important issues of current research, but both of them were at the initial stage. Therefore, AMPs needs to be further studied, especially for the source and fate, which would be conducive to understand the global distribution of AMPs. Furthermore, a standardized manual on sampling and processing of AMPs was also necessary to facilitate the comparative analysis of data between different studies and the construction of global models.

Identification and Quantification of Microplastics in Effluents of Wastewater Treatment Plant by Differential Scanning Calorimetry (DSC)

In this research, the presence of microplastics was detected through a differential scanning calorimetry (DSC) analysis of three wastewater treatment plants. One of these plants applied only a preliminary treatment stage while the others applied up to a secondary treatment stage to evaluate their effectiveness. The results showed the presence of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene terephthalate (PET), which were classified as fragments, fibers or granules. During the evaluation of the plants, it was determined that the preliminary treatment did not remove more than 58% of the microplastics, while the plants applying up to a secondary treatment with activated sludge achieved microplastic removal effectiveness between 90% and 96.9%.

Long-Term Occurrence and Fate of Microplastics in WWTPs: A Case Study in Southwest Europe

Microplastic (MP) water pollution is a major problem that the world is currently facing, and wastewater treatment plants (WWTPs) represent one of the main alternatives to reduce the MP release to the environment. Several studies have analysed punctual samples taken throughout the wastewater treatment line. However, there are few long-term studies on the evolution of MPs over time in WWTPs. This work analyses the performance of a WWTP sited in Southwest Europe in relation with annual occurrence and fate of MPs. Samples were monthly taken at different points of the facility (influent, secondary effluent, final effluent, and sludge) and MPs were quantified and characterised by means of stereomicroscopy and FTIR spectrophotometry. The majority of MPs found in wastewater and sludge samples were fragments and fibres. Regarding to the chemical composition, in the water samples, polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP) stood out, whereas, in the sludge samples, the main polymers were PET, polyamide (PA) and polystyrene (PS). The MPs more easily removed during the wastewater treatment processes were those with sizes greater than 500 µm. Results showed that the MPs removal was very high during all the period analysed with removal efficiencies between 89% and 95%, so no great variations were found between months. MP concentrations in dry sludge samples ranged between 12 and 39 MPs/g, which represented around 79% of the total MPs removed during the wastewater treatment processes. It is noticeable that a trend between temperature and MPs entrapped in sewage sludge was observed, i.e., higher temperatures entailed higher percentage of retention.

Critical steps for microplastics characterization from the atmosphere

The microplastics found in many environments, whether in atmospheric, terrestrial, aquatic marine, or freshwater systems, result from exaggerated consumption of plastics. These, when discarded incorrectly, persist in the environment, and degrade into many forms. Researchers have studied microplastics using many collection and characterization methodologies, yet often obtaining divergent results for the same environments. This study presents a bibliographic review of sampling and characterization methodologies for nano and microplastics in the atmospheric environment. Part I of this review presents sampling types and pre-treatment microplastics found in the air to elucidate the principal means of separating plastic species with consequent polymer identification. In Part II, Infrared and Raman Spectroscopy techniques are evaluated for their precision in microplastic identification. The study demonstrates by a systematic revision that depending on the MPs origin, certain characterization techniques are more appropriate. Considering the direct influence of sample impurities, sample pre-treatment is a critical step for correct chemical identification.

Investigation of microplastics in sludge from five wastewater treatment plants in Nanjing, China

Municipal wastewater treatment plants (WWTPs) have been regarded as the main receptors of microplastics in industrial and domestic wastewater. The excess sludge they generate is an important carrier for the microplastics to enter the environment. In China, relevant regional studies are still in an initial phase. In this work, microplastics in the sewage sludges at different sampling points of five WWTPs in Nanjing City (an important city in the Yangtze River basin) were investigated, including their abundance, morphology and chemical composition. Furthermore, the influence factors such as population density, economic development level, wastewater source and treatment process were also discussed. The analysis results through optical microscope and FT-IR showed that the detected microplastics were divided into fragments, films, fibers and granules. Their chemical component reached up to 19 species, including small amounts of petroleum resins which was scarcely detected in other studies. Wastewater source was the primary factor influencing the microplastic abundance and size in sludge. And the microplastic shape and chemical components were closely related to the industrial type. Furthermore, because the removal effect on the microplastics with different morphologies were varied with the treatment process, the preliminary suggestions on the technology for particular wastewater were proposed. This study provides partial regional data and analysis for the microplastics contained in the sludge of WWTPs, expecting to provide a certain theoretical support for the operations management of WWTPs and standardized sludge treatment.

Spatial distribution and potential sources of microplastics in the Songhua River flowing through urban centers in Northeast China

Microplastics (MPs) have elicited increasing concerns in freshwater systems worldwide. However, little information is available on the MP pollution in the Songhua River, the third largest river in China. And the understanding of the sources and pathways of MPs is limited. In this study, MPs were sampled from river water and wastewater treatment plants in five cities along the Songhua River to investigate the occurrence, spatial distribution, characteristics, and potential sources of MPs. Polyethylene, polypropylene and polystyrene accounted for more than 95% of the total MPs. MP pollution was determined to be spatially heterogeneous. The concentration of MPs in the urban center was always considerably higher than that in the upper reach, and irregular variation was observed from the urban center to the lower reach for each city. Urbanization was one of the primary driving forces of spatial variability. Statistically significant positive correlations (p-value < 0.05) were noted between the average concentration of MPs in river water and population density (p = 0.0023) and number of industrial enterprises above designated size (p = 0.0042) of each city. Line and fiber were the major shapes, and white was the most dominant color. Large (1-5 mm) and small (≤ 1 mm) MP particles accounted for 50% each. Multiple correspondence analysis as a new methodological approach was conducted to elucidate the sources of MPs for the first time. The potential sources of MPs included daily use, fishing, agricultural, and industrial productions. This work provides information about MP contamination for future studies on freshwater systems and new insights into the source apportionment of MPs.

Microplastics in Wastewater and Drinking Water Treatment Plants: Occurrence and Removal of Microfibres

Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.