Optimization of preparation parameters for environmentally friendly attapulgite functionalized by chitosan and its adsorption properties for Cd2

Clay minerals and clay-based materials for heavy metals pollution control

Heavy metal contamination is a huge hazard to the environment and human health, and research into removing heavy metals from their primary sources (industrial and agricultural wastes) has increased significantly. Adsorption has received interest due to its distinct benefits over other treatment approaches. The distinctive qualities of clay minerals, such as their high specific surface area, strong cation exchange capacity, and varied structures, make them particularly ideal for use in the manufacture of adsorbents. The customizable structure and performance of clay minerals allow for unprecedented diversity in adsorbent creation, opening up new possibilities for the development of high-efficiency and functional adsorption technologies. In this review, various approaches for developing optimal adsorbents from raw materials are presented. Then, the correlation between functionalization and performance is investigated, focusing on the effects of structural features and surface properties on adsorption performance. The research progress on the synthesis of adsorbents using clay minerals and other functional materials is systematically reported. Finally, the challenges and opportunities in designing and utilizing innovative clay mineral adsorbents are discussed.

Sorptive removal of cadmium using the attapulgite modified by the combination of calcination and iron

Sorptive removal of cadmium (Cd) from the aqueous solutions using the easily available natural materials is an attractive method. However, the adsorption efficiencies of these materials, such as clays, are typically low. Besides, they are generally in relatively low stability and renewability, which restrict their application. Thus, modification of these materials to enhance their performance on Cd removal has gained growing attentions. Herein, the integration of calcination and ferric chloride (FeCl3) was used to modify a typical clay, i.e., attapulgite, to increase the adsorption sites, and thus to develop a robust adsorbent for Cd. Under the optimum conditions for attapulgite modification (i.e., the mass ratio of FeCl3 to attapulgite was 1:2, calcination temperature was 350 °C, and calcination time was 1.5 h) and Cd adsorption (i.e., initial pH of 6.0, adsorption temperature of 25 °C, and adsorbent dosage of 1.0 g/L), the maximum adsorption capacity of the modified attapulgite toward Cd was 149.9 mg/g. Mechanisms of surface complexation and electrostatic attraction were involved in the efficient removal of Cd. The adsorption of Cd increased with pH due to the increased electrostatic attraction. Metal cations inhibited the Cd adsorption through competing with the adsorption sites. The changes of Gibbs-free energy during the adsorption of Cd were lower than zero and decreased with temperature, suggesting the process was spontaneous and endothermic. The removal efficiency of Cd after 5 times of recycle maintained at 82% of that of the raw modified attapulgite demonstrated the stability of the adsorbent. These results suggested that the modified attapulgite is robust for Cd removal and is promising for land application.

Green synthesis of chitosan/erythritol/graphene oxide composites for simultaneous removal of some toxic species from simulated solution

In this study, chitosan (Ch) is adapted via green methodology including sonication induced crosslinking with different weight ratios of erythritol (Er) from (Ch-Er)1 to (Ch-Er)4. The products were casted in the form of thin films. The chemical modification was proved via FTIR spectroscopy. Then, the modified products were verified via an atomic force microscopy (AFM) investigation for their topography and surface properties. The data revealed that the optimized sample was (Ch-Er)3. This sample was further modified by different weight ratios of graphene oxide 0.1, 0.2, 0.4, and 0.8 wt./wt. (symbolized as (Ch-Er)3GO1, (Ch-Er)3GO2, (Ch-Er)3GO4, and (Ch-Er)3GO8 respectively). The prepared samples were investigated by different analytical tools. Then, the adjusted sample (Ch-Er)3GO2 was irradiated by electron beam (e-beam) at 10 and 20 kGy of irradiation doses to give samples (Ch-Er)3GO2R10 and (Ch-Er)3GO2R20, respectively. The AFM data of the irradiated samples showed that the pore size decreases, and surface roughness increases at higher energy e-beam due to the formation of more crosslinking points. The optimum samples of the prepared formulations were tested as sorbent materials for simultaneous elimination of methylene blue (MB) dye and mercury cation (Hg2+) from simulated solutions. The maximum removal of both MB dye and Hg2+ cation was achieved by (Ch-Er)3GO2R10 (186.23 mg g-1 and 205 mg g-1) respectively.

Polycaprolactone/Gelatin/Hydroxyapatite Electrospun Nanomembrane Materials Incorporated with Different Proportions of Attapulgite Synergistically Promote Bone Formation

Purpose

To enhance the osteoinductive effect of Hydroxyapatite (HA) in bone tissue engineering, this study manufactured polycaprolactone (PCL)/gelatin (GEL)/HA nanofibrous scaffolds incorporated with different ratios of attapulgite (ATP): HA (0:3, 0:0, 1:1, 2:1 and 3:0) by high-voltage electrospinning. The synergistic effect exerted by ATP and HA on bone formation was explored both in vivo and in vitro.

Methods and Results

First, we determined the group composition and crystal structure of the nanosheets by Fourier transform infrared (FTIR) and X-ray diffraction (XRD) analyses. Then, the physical properties of the scaffolds, including the modulus of elasticity, porosity and water absorption were evaluated. Moreover, the surface microstructure of the nanofibrous scaffolds was captured by Scanning electron microscopy (SEM) and Transmission Electron Microscope (TEM). The biocompatibility of the fabricated scaffolds represented by cell counting kit 8 (CCK-8) and phalloidin staining was also assessed. Next, in vitro osteogenesis was evaluated. Real-time PCR, alkaline phosphatase (ALP) staining and Alizarin red S (ARS) staining results showed that the materials incorporated with HA and ATP at a ratio of 2:1 synergistically promoted more osteoblastic differentiation and extracellular mineralization than scaffolds doped with HA and ATP alone. Last, in vivo, Hematoxylin-Eosin staining (HE staining) and Masson staining showed that groups treated with HA and ATP acquired optimal patterns of bone regeneration.

Conclusion

This study clarified for the first time that the combination of HA and ATP orchestrated biomaterial-induced osseointegration, and the synergistic effect was more significant when the ratio of ATP/HA was 2:1. This conclusion also provides new ideas and a scientific basis for the development of functionalized nanomaterials in bone tissue engineering.

Contributions of Various Cd(II) Adsorption Mechanisms by Phragmites australis-Activated Carbon Modified with Mannitol

Due to its high toxicity, persistence, and bioaccumulation in the food chain, controlling cadmium (Cd) pollution in wastewater is urgent. Activated carbon is a popular material for removing Cd. To improve the Cd(II) adsorption efficiency by increasing the number of oxygen-containing functional groups, Phragmites australis-activated carbon (PAAC) was modified with mannitol at a low temperature (150 °C). The textural and chemical characteristics of PAAC and modified PAAC (M-PAAC) were analyzed by surface area analysis, elemental analysis, Boehm's titration, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. Batch adsorption experiments were conducted to investigate the influence of Cd(II) concentration, contact time, ionic strength, and pH on Cd(II) adsorption. The main adsorption mechanisms of Cd(II) on activated carbon were quantitatively calculated. The results showed that mannitol modification slightly decreased the S BET (5.30% of PAAC) and increased the content of carboxyl, lactone, and phenolic groups (total increase of 43.96% with PAAC), which enhanced the adsorption capacity of PAAC by 58.59%. The adsorption isotherms of PAAC and M-PAAC were described well using the Temkin model, while the intraparticle diffusion model fitted the Cd(II) adsorption kinetics best. Precipitation with minerals was a crucial factor for Cd(II) adsorption on activated carbon (50.40% for PAAC and 40.41% for M-PAAC). Meanwhile, the Cd(II) adsorption by M-PAAC was also dominated by complexation with oxygen-containing functional groups (33.60%). This research provides a method for recovering wetland plant biomass to prepare activated carbon and efficiently treat Cd-containing wastewater.

Efficient removal of Cd2+ from aqueous solution with a novel composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides prepared from biotite

Taking low cost silicate minerals to develop efficient Cd²⁺ adsorption materials was favorable to the comprehensive utilization of minerals and remediation of environmental pollution. In this study, a composite of silicon supported nano iron/aluminum/magnesium (hydr)oxides was prepared with biotite by combining acid leaching and base precipitation process, which was used to remove Cd²⁺. Cd²⁺ adsorption behaviors were in accordance of pseudo-second order kinetic model and Langmuir model, and the obtained maximal Cd²⁺ adsorption capacity was 78.37 mg/g. Increasing pH and temperature could accelerate the removal of Cd²⁺. The activation energy was calculated as 66.05 kJ/mol, meaning that Cd²⁺ removal process was mainly depended on chemical adsorption. XRD and SEM results showed that this composite was a micro-nano structure of layered silica supported nano iron/aluminum/magnesium (hydr)oxides. Cd²⁺ removal mechanisms were consisted of surface complexation and ion exchange between Cd²⁺ and other metal ions, and the ion exchange interaction played the major role. These results indicated that a novel efficient utilization way for silicate minerals was developed.

Isotherm, kinetics, and adsorption mechanism studies of diethylenetriaminepentaacetic acid-modified banana/pomegranate peels as efficient adsorbents for removing Cd(II) and Ni(II) from aqueous solution

Two novel absorbents were synthesized for the first time by banana and pomegranate peels using diethylenetriaminepentaacetic acid (DTPA) modification to eliminate Cd(II) and Ni(II) of sewage. The DTPA-modified peels performed significantly higher adsorption capacity than unmodified materials. The maximum adsorption capacities of DTPA-modified banana/pomegranate peel were 46.729/46.296 mg/g for Cd(II), and 29.240/16.611 mg/g for Ni(II). Adsorption isotherm and kinetics models were simulated to determine their removal efficiency and potential for recovery of these two heavy metals. As the results, the adsorption reached equilibrium within 5 min and was well described by the pseudo-second order model and Langmuir isotherm. The surface morphology analysis of the synthetic materials by Scanning Electron Microscopy-Energy Dispersive X-ray spectroscopy, Fourier Transform Infrared spectroscopy, and X-ray Photoelectron Spectroscopy, implied that ion exchange, complexation, and physical adsorption may together contribute to Cd(II) and Ni(II) loading on DTPA-modified peels. This study demonstrates the feasibility of waste peels as cost-efficient bio-absorbents to remove Cd(II) and Ni(II) in sewage systems, and discovers potential adsorption mechanism of efficiency improvements after DTPA modification.