Highly efficient catalytic reduction of 4-nitrophenol and organic dyes by ultrafine palladium nanoparticles anchored on CeO2 nanorods

Palladium nanoparticles anchored on NiO particles-modified micro-size chitosan spheres: A promising, active, and retrievable catalyst system for treatment of environmental pollutants

Efficient treatment of toxic organic pollutants in water/wastewater by using innovative, cost efficient, and simple technologies has recently become an important issue worldwide. Remediation of these pollutants with chemical reduction in the presence of a nano-sized catalyst and a reducing agent is one of the most useful methodologies. In the present study, we have designed a promising heterogeneous catalyst system (Pd@CS-NiO) by easy and efficient stabilization of palladium nanoparticles on the surface of microspheres composed of chitosan (CS)-NiO particles (CS-NiO) for the reduction of organic pollutants. The nano-structure of the developed Pd@CS-NiO was successfully validated using FE-SEM, XRD, EDS, TEM, and FTIR/ATR and its particles size was determined as 10 nm. The catalytic power of Pd@CS-NiO was then assessed in the reduction of 4-nitro-o-phenylenediamine (4-NPDA), 4-nitrophenol (4-NP), 4-nitroaniline (4-NA), 2-nitroaniline (2-NA), and some organic dyes, namely methylene blue (MB), methyl orange (MO), and rhodamine B (RhB) in aqueous medium at room temperature. The reductions were thoroughly studied spectro-photometrically. The tests displayed that the synthesized Pd@CS-NiO was a highly active and useful catalyst that reduced these pollutants in 0-145 s. Moreover, the rate constants for 2-NA, 4-NP, 4-NA, 4-NPDA, MO, and RhB were found to be 0.017 s-1, 0.011 s-1, 0.006 s-1, 0.013 s-1, 0.023 s-1, and 0.03 s-1, respectively. Moreover, the recycling test indicated that Pd@CS-NiO may be recovered easily thanks to its micro size nature and could be used up to seven steps, confirming its practical application potential.

Optimizing Cr(VI) reduction to Cr(III) using Pd-CNTs nanocatalyst: kinetic Monte Carlo simulation and experimental design insights

In this investigation, we explored the kinetics of Cr(VI) reduction to Cr(III) on carbon nanotube decorated with palladium (Pd-CNTs) nanocatalyst, using formic acid as the reducing agent. This study has been bone utilizing kinetic Monte Carlo simulation and experimental design methods. The mechanism and kinetic parameters of this reaction are provided. The effect various factors such as reaction time, pH level, dichromate (Cr2O72-) concentration, and formic acid concentration on Cr(VI) reduction was studied. Concentrations of HCOOH and Cr2O72- were identified as the crucial variables, while the HCOOH concentration has the most significant impact. Positive influences on Cr(VI) reduction were observed with increasing pH level and HCOOH concentration. Reaction time positively affects on Cr(VI) reduction efficiency. However, the concentration of Cr2O72- showed an increasing effect up to a threshold, negatively impacting the efficiency. The optimal conditions (Reaction time = 60 min, pH = 4.5, [Cr2O72-] = 5.05 × 10-3 M, and [HCOOH] = 0.95 M) for Cr(VI) reduction. At optimal conditions, the Cr(VI) reduction efficiency was obtained to be 100%.

Highly efficient catalytic degradation of organic dyes using iron nanoparticles synthesized with Vernonia Amygdalina leaf extract

Today, nanoscience explores the potential of nanoparticles due to their extraordinary properties compared to bulk materials. The synthesis of metal nanoparticles using plant extracts is a very promising method for environmental remediation, which gets global attention due to pollution-led global warming. In the present study, iron nanoparticles (FeNPs) were successfully synthesized by the green method using Vernonia amygdalina plant leaf extract as a natural reducing and capping agent. Biosynthesized FeNPs were characterized with different analytical techniques such as UV-visible, FT-IR, XRD, and SEM. The analysis revealed the formation of amorphous FeNPs with an irregular morphology and non-uniform distribution in size and shape. The average particle size was approximately 2.31 µm. According to the catalytic degradation investigation, the FeNPs produced via the green approach are highly effective in breaking down both CV and MB into non-toxic products, with a maximum degradation efficiency of 97.47% and 94.22%, respectively, when the right conditions are met. The kinetics study exhibited a high correlation coefficient close to unity (0.999) and (0.995) for the degradation of MB and CV, respectively, for the zero-order pseudo-kinetics model, which describes the model as highly suitable for the degradation of both dyes by FeNPs compared to other models. The reusability and stability of biosynthesized nano-catalysts were studied and successfully used as efficient catalysts with a slight decrease in the degradation rate more than four times. The results from this study illustrate that green synthesized FeNPs offer a cost-effective, environmentally friendly, and efficient means for the catalytic degradation of organic dyes.

Doping rare earth cations with an additional chemical reduction synergistically weakened the photocatalytic performance of ceria

Chemical reducing or rare earth cations (RE) doping was normally employed to promote the photocatalytic performance of ceria, aimed to evaluate their cooperation influences, ceria was obtained by decomposing homogenously RE (RE = La, Sm, and Y)-doped CeCO₃OH in H₂. XPS and EPR results evidenced that the excess oxygen vacancies (OVs) were formed in RE-doped CeO₂ compared to the un-doped ceria. However, all the RE-doped ceria unexpectedly showed an impeded photocatalytic activity towards to methylene blue (MB) photodegradation. The 5% Sm-doped ceria had the best MB photodegradation ratio of 81.47% after 2-h reaction in all RE-doped samples, which was lower than that of 87.24% for the un-doped ceria. After doping RE cations and chemical reducing, the band gap of ceria were almost narrowed, while the PL spectra and photo-electro characterizations indicated that the separation efficiency of photo-excited e^-/h⁺ (electrons/holes) was reduced. The RE dopants and formed excess OVs including inner and surface OVs was proposed to promote the recombination of e^-/h⁺ which further hindered the generation of active species of ·O₂^- and ·OH, and finally weakened the photocatalytic activity of ceria.

Controlled gold-palladium cores in ceria hollow spheres as nanoreactor for plasmon-enhanced catalysis under visible light irradiation

Visible-light-driven organic transformations boosting by localized surface plasmon resonance (LSPR) have been attracting considerable interests. Gold-palladium (Au-Pd) bimetallic nanoparticles (NPs) are considered as ideal plasmonic catalysts realizing efficient light-driven catalysis. Nevertheless, stability and adjustability of plasmonic Au-Pd NPs remain to be a challenging task. Herein, we designed the controlled Au-Pd cores in ceria (CeO₂) hollow spheres (Au-Pd@h-CeO₂) as nanoreactor for Suzuki cross-coupling reactions. Under visible light irradiation, the Au-Pd@h-CeO₂ exhibited remarkable photocatalytic performance with a turnover frequency (TOF) value as high as 797 h^-1. More impressively, the coupling reactions of aryl chlorides bearing electron-withdrawing groups proceeded better and afforded the corresponding desired products in good yields. Detailed structural, optical and photoelectrochemical characterizations unraveled that the enhanced photocatalytic efficiency of Au-Pd@h-CeO₂ was attributed to the LSPR effect of controllable Au-Pd cores and their synergetic effect of hollow CeO₂ shells. The merits of this hollow sphere architecture lied on as followed: (I) Incident light could be reflected and refracted between the inner cores and outer shells, which extended the trapping of incident light, and then enhanced the light harvesting efficiency; (II) the mesoporous architecture of CeO₂ hollow spheres provided a huge specific surface area and numerous mesoporous channels, which could enhance the absorption of reactants and provided more active sites; (III) LSPR excitation of Au-Pd NPs and band-gap excitation of CeO₂ simultaneously occurred under visible light illumination, inducing a more efficient separation and transfer of charge carriers. Furthermore, due to the confinment effect of CeO₂ shells, the Au-Pd@h-CeO₂ exhibited an excellent reusability after six cycles without significant deactivation of yield. Our findings provided a facile way to design highly efficient plasmonic-enhanced photocatalysts utilized for catalytic organic reactions.

Rational construction of Co-promoted 1T-MoS2 nanoflowers towards high-efficiency 4-nitrophenol reduction

Developing efficient and cost-effective non-noble metal catalysts for the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) is of great importance. Herein, Co-promoted 1T-MoS₂ nanoflowers were synthesized via a one-step hydrothermal method. The influence of Co content on the structure and catalytic performance of 1T-MoS₂ was studied in detail. It was found that Co doping not only enhanced the electronic conductivity but also increased the hydrogen adsorption ability of 1T-MoS₂. Meanwhile, the highest activity was achieved due to the synergy effect of Co-Mo-S and CoS₂ active phase. In the catalytic reduction of 4-NP, the reaction rate constant of Co/1T-MoS₂-0.3 was as high as 0.908 min^-1 and the catalyst exhibited excellent stability after recycling five times. The present work provides new insights for the rational design of highly efficient metal-doped MoS₂ catalysts towards 4-NP reduction in wastewater.

Swift reduction of nitroaromatics by gold nanoparticles anchored on steam-activated carbon black via simple preparation

Gold (Au) nanoparticles supported on certain platforms display highly efficient activity on nitroaromatics reduction. In this study, steam-activated carbon black (SCB) was used as a platform to fabricate Au/SCB composites via a green and simple method for 4-nitrophenol (4-NP) reduction. The obtained Au/SCB composites exhibit efficient catalytic performance in reduction of 4-NP (rate constant k_app = 2.1925 min^-1). The effects of SCB activated under different steam temperature, Au loading amount, pH, and reaction temperature and NaBH₄ concentration were studied. The structural advantages of SCB as a platform were analyzed by various characterizations. Especially, the result of N₂ adsorption-desorption method showed that steam activating process could bring higher surface area (from 185.9689 to 249.0053 m²/g), larger pore volume (from 0.073268 to 0.165246 cm³/g), and more micropore for SCB when compared with initial CB, demonstrating the suitable of SCB for Au NP anchoring, thus promoting the catalytic activity. This work contributes to the fabrication of other supported metal nanoparticle catalysts for preparing different functional nanocomposites for different applications.